Drum Orientation Drum Orientation |
---|
![]() | ![]() |
Vertical | Horizontal |
![]() | |
Near Vertical |
For Container Type For Container Type |
---|
|
|
Material Material |
---|
|
Overall Capacity Overall Capacity |
---|
|
|
Capacity Capacity |
---|
|
|
For Container Diameter For Container Diameter |
---|
|
|
Tilt Mechanism Tilt Mechanism |
---|
|
Finish Finish |
---|
|
For Drum Diameter For Drum Diameter |
---|
|
|
Holding Mechanism Holding Mechanism |
---|
|
Assembled or Unassembled Assembled or Unassembled |
---|
|
Wheel Configuration Wheel Configuration |
---|
|
More
Use with overhead lifting equipment on closed-head drums and open-head drums with tightly secured lids.
Lifters with pads grip the drum with equal pressure on both sides for a secure, even lift.
Lifters with clamps have high-strength jaws that provide a vise-like grip on drum rims up to 1" deep without damaging them. The gripping action is unaffected by greasy and oily surfaces. Clamps have a dual-lever design and are connected by chain.
Lifters with guide handles provides ultimate drum control.
Styles A-D lifters grip as they pick up the drum.
Style B lifter requires a manual release.
Style E lifter have a ratchet strap to hold the barrel. Pockets at the top of the lifter allow for use with a forklift.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
For Drum | Drum | Bolt | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Dia. | Max. Ht. | Material | Cap., lbs. | Orientation | Gripping Location | Material | Color | Eye Dia. | Eye Lg. | Eye Wd. | Dia. | Lg. | Each | |
With Pads | ||||||||||||||||
A | 55 | 22 1/2" | __ | Steel | 1,000 | Vertical | Rim | Painted Steel | Blue | 3" | __ | __ | __ | __ | 0000000 | 0000000 |
B | 55, 85 | 22", 28" | __ | Steel | 1,000 | Vertical | Rim | Painted Steel | Orange | __ | __ | __ | 3/4" | 2" | 00000000 | 000000 |
With Pads and Guide Handles | ||||||||||||||||
C | 30, 55 | 18"-26" | __ | Steel, Plastic, Fiber | 1,000 | Vertical | Rim | Painted Steel | Blue | __ | __ | __ | 3/4" | 1 1/2" | 00000000 | 000000 |
With Clamps | ||||||||||||||||
D | 20, 30, 55 | 16"-24" | __ | Steel | 750 | Vertical | Rim | Painted Steel | Gray | __ | 5" | 2 1/2" | __ | __ | 000000 | 000000 |
D | 20, 30, 55 | 18"-24" | __ | Steel | 2,000 | Vertical | Rim | Painted Steel | Gray | __ | 4" | 2 1/2" | __ | __ | 000000 | 000000 |
With Straps and Guide Handles | ||||||||||||||||
E | 30, 55 | 24 5/8" | 42" | Steel, Plastic, Fiber | 1,000 | Vertical | Base | Powder-Coated Steel | Yellow | 5/8" | __ | __ | __ | __ | 000000 | 000000 |
Use these two-leg slings to stack steel drums.
Slings with clamps keep a grip on the drum even when not under load.
Slings with hooks grip the drum as the sling is lifted.
Slings with aluminum-bronze hooks are made of spark-resistant components.
Style C sling has two lifting eyes; use the center eye for horizontal lifts and the other eye for near vertical lifts. It has two fittings on the center eye that allow the length of the sling legs to adjust.
Style D sling has one flexible leg, one rigid bar leg, and two round lifting eyes. Use the center eye for horizontal lifts and the other eye for near vertical lifts.
Style E slings have rigid bar legs.
Style F slings are tightened and locked with a load binder.
Warning: Never use to lift people or items over people.
For Drum | Drum | Eye | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Max. Dia. | Cap., lbs. | Gripping Location | Orientation | Material | Trade Size | Grade | Hook Opening Wd. | Lg. | Wd. | Specifications Met | Each | |
A | 30, 55 | 25" | 2,200 | Rim | Vertical | Steel | 9/32 | 100 | 7/8" | 5" | 2 1/2" | ASME B30.9 | 000000 | 0000000 |
For Drum | Drum | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Max. Ht. | Max. Dia. | Cap., lbs. | Gripping Location | Orientation | Material | Trade Size | Grade | Bar Dia. | Hook Opening Wd. | Eye Dia. | Eye Lg. | Eye Wd. | Specifications Met | Each | |
B | 20, 30, 55 | __ | 24" | 1,000 | Rim | Vertical | Nylon | __ | __ | __ | 1 1/8" | __ | __ | __ | __ | 0000000 | 000000 |
B | 20, 30, 55 | 36" | __ | 1,000 | Rim | Horizontal | Nylon | __ | __ | __ | 1 1/8" | __ | __ | __ | __ | 0000000 | 00000 |
C | 55 | 38" | __ | 1,100 | Rim | Near Vertical, Horizontal | Steel | 5/16 | 100 | __ | 13/16" | 2 1/2", 3 1/2" | __ | __ | __ | 0000000 | 000000 |
D | 55, 85 | 41" | __ | 2,000 | Rim | Near Vertical, Horizontal | Steel | 3/16 | 80 | 5/8" | 1 1/4" | 3" | __ | __ | ASME B30.9 | 0000000 | 000000 |
E | 55 | 36" | __ | 1,000 | Rim | Horizontal | Steel | __ | __ | 1/2" | 1 1/2" | __ | 5" | 2 5/8" | __ | 000000 | 00000 |
For Drum | Drum | Eye | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Max. Ht. | Cap., lbs. | Gripping Location | Orientation | Material | Hook Opening Wd. | Bar Dia. | Lg. | Wd. | Each | |
E | 55 | 36" | 1,000 | Rim | Horizontal | 304 Stainless Steel | 3/4" | 1/2" | 3" | 2 3/4" | 000000 | 0000000 |
For Drum | Drum | Wire Rope | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Dia. | Cap., lbs. | Gripping Location | Orientation | Material | Material | Dia. | Construction | Eye Dia. | Specifications Met | Each | |
F | 55 | 22 3/4" | 1,000 | Body | Vertical | Polyester | Galvanized Steel | 1/4" | 7×19 | 3" | ASME B30.9 | 0000000 | 0000000 |
Raise, transport, tilt, and drain full drums using the hook of a crane or hoist. A lock on each side of the frame keeps the drum vertical or horizontal during transport.
Lifters with chain have a ratchet tightener to secure the drum.
Lifters with pads have adjustment screws to secure the drum.
Optional tilt brake (sold separately) holds your drum in place if chain is released.
Note: In half-full drums, contents shift, which reduces capacity.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Drum Lifters | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Drum | Drum Cap., lbs. | Lifting Eye | Optional 30-Gal. Drum Adapters | Optional Tilt Brakes | ||||||||||||
Cap., gal. | Dia. | Material | Full (Wt.) | Half-Full | Tilt Mechanism | Movement | Material | Lg. | Wd. | Each | Each | Each | ||||
With Chain | ||||||||||||||||
A | 55 | 21"-23" | Steel, Fiber | 800 | 500 | Hand Operated | 360° Swivel | Painted Steel | 2 3/8" | 2" | 000000 | 0000000 | 000000 | 00 | 000000 | 00 |
A | 55 | 22 1/2"-23" | Steel, Fiber | 800 | 500 | Hand Operated | 360° Swivel | Painted Steel | 2 3/8" | 2" | 0000000 | 000000 | 0000000 | 0000000 | 000000 | 00 |
B | 55 | 22 1/2" | Steel | 1,500 | 800 | Chain Hand Wheel | 360° Swivel | Painted Steel | 2 3/8" | 2" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 0000000 |
B | 55 | 22 1/2" | Steel | 2,000 | 1,000 | Chain Hand Wheel | 360° Swivel | Painted Steel | 2 3/8" | 3" | 0000000 | 00000000 | 000000 | 00 | 000000 | 00 |
B | 55 | 22"-23 1/2" | Steel, Fiber | 800 | 500 | Chain Hand Wheel | 360° Swivel | Painted Steel | 2 3/8" | 2" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
C | 55 | 22"-23 1/2" | Steel, Plastic | 1,500 | 800 | Chain Hand Wheel | 360° Swivel | Painted Steel | 2 3/8" | 2" | 0000000 | 00000000 | 0000000 | 000000 | 0000000 | 000000 |
With Pads | ||||||||||||||||
D | 20, 30, 55 | 15"-23" | Steel, Fiber | 500 | 250 | Chain Hand Wheel | 360° Swivel | Painted Steel | 2 3/8" | 2" | 0000000 | 00000000 | 000000 | 00 | 0000000 | 000000 |
Convert a forklift to lift and transport drums. The arms on these drum movers automatically close and lock around the side of a drum when lifted with a forklift and release when the drum is set down. Locking screws clamp down on the forks to secure the movers to your forklift.
Style A are for use with plastic drums.
Style C have a single locking screw for faster tightening.
Style D have rubber-lined gripping arms that provide a nonslip contact surface to better grip drums.
Style E hold two drums.
Warning: Never use to lift people or items over people.
For Container | For Max. Fork | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Max. No. of Containers | Type | Cap., gal. | Dia. | O'all Cap., lbs. | Cap. per Drum, lbs. | Wd. | Ht. | Fork Pocket Spacing Ctr.-to-Ctr. | For Min. Rim Dp. | Each | |
Steel | ||||||||||||
A | 1 | Plastic | 30, 55 | 18"-22 1/2" | 1,000 | __ | 5 3/8" | 1 1/2" | 19 3/4"-23 5/8" | 3/16" | 0000000 | 0000000 |
B | 1 | Steel | 30, 55 | 18", 22" | 1,500 | __ | 5 1/2" | 2" | 22" | __ | 0000000 | 000000 |
B | 1 | Steel | 55 | 22" | 1,500 | __ | 5 1/2" | 2" | 22" | __ | 0000000 | 000000 |
C | 1 | Steel | 15, 30, 55 | 13", 17 1/4", 22 1/2" | 1,500 | __ | 22 1/2" | 3 1/2" | 22 1/2" | __ | 0000000 | 000000 |
D | 1 | Steel | 30, 55, 85 | 18"-28" | 1,500 | __ | 5 5/8" | 1 5/8" | 21 3/4"-30" | __ | 0000000 | 000000 |
E | 2 | Steel | 55 | 22" | __ | 1,500 | 7" | 2 1/4" | 25 5/8" | __ | 0000000 | 000000 |
The jaws automatically grip the top of the drum when lifted with a forklift—great for areas with limited side clearance. The jaws release when the drum is set down. Movers have locking screws that clamp down on the forks to secure the movers to your forklift. Use with closed- and open-head drums.
Drum protectors (sold separately) bolt to the base of the mover to cushion and protect the drum from wear (mounting hardware included). Drum movers for two containers require two protectors.
Warning: Never use to lift people or items over people.
Drum Movers | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Container | For Max. Fork | Drum Protectors | Replacement Grip Assemblies | |||||||||||
For Max. No. of Containers | Type | Cap., gal. | Dia. | O'all Cap., lbs. | Cap. per Drum, lbs. | Wd. | Ht. | Fork Pocket Spacing Ctr.-to-Ctr. | Each | Each | Each | |||
Steel | ||||||||||||||
1 | Fiber, Plastic, Steel | 30, 55, 85 | 18"-26" | 1,000 | __ | 5 1/2" | 2" | 22" | 0000000 | 0000000 | 000000 | 00 | 0000000 | 0000000 |
1 | Fiber, Plastic, Steel | 30, 55, 85 | 18"-26" | 1,600 | __ | 7" | 2 1/4" | 20 3/8" | 000000 | 00000000 | 000000 | 000000 | 0000000 | 000000 |
2 | Fiber, Plastic, Steel | 30, 55, 85 | 18"-26" | __ | 1,000 | 7" | 2 1/4" | 25 5/8" | 0000000 | 00000000 | 000000 | 00 | 0000000 | 000000 |
2 | Fiber, Plastic, Steel | 30, 55, 85 | 18"-26" | __ | 1,600 | 7" | 2 1/4" | 20 3/8" | 000000 | 00000000 | 000000 | 00000 | 0000000 | 000000 |
These dispensers mount to the forks of a forklift for lifting and transport, plus they pivot for manual tilting so dispensing is easy. The band clamps around the drum and is secured with a latch.
Warning: Never use to lift people or items over people.
Slide these dispensers onto the forks of a forklift to raise a drum, then use the hand chain to tilt and drain it from up to 10 feet away. Drums can rotate 360° in either direction. Chains or straps with ratchet-style tighteners secure the drums. Note: In half-full drums contents shift, which reduces capacity.
Style B dispensers have an additional bracket assembly that grips the drum from the top and bottom.
Optional drum adapters fit inside the saddle to hold 30-gallon drums.
Optional tilt brakes prevent the drum from tilting when not in use.
Warning: Never use to lift people or items over people.
Drum Dispensers | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Container | O'all Cap., lbs. | For Max. Fork | Optional Tilt Brakes | ||||||||||
Style | Type | Cap., gal. | Dia. | Full Drum | Half-Full Drum | Wd. | Ht. | Fork Pocket Spacing Ctr.-to-Ctr. | Holding Mechanism (No. of) | Each | Each | ||
Steel | |||||||||||||
A | Fiber, Steel | 55 | 22"-23 1/2" | 800 | 500 | 6 1/2" | 2 1/2" | 31" | Chain (1) | 0000000 | 0000000 | 0000000 | 0000000 |
A | Steel | 55 | 22"-23 1/2" | 1,500 | 800 | 6 1/2" | 2 1/2" | 31" | Chain (1) | 0000000 | 00000000 | 0000000 | 000000 |
A | Steel | 55 | 22 1/2" | 2,000 | 1,000 | 6 1/2" | 2 1/2" | 31" | Strap (2) | 0000000 | 00000000 | 000000 | 00 |
B | Fiber, Plastic, Steel | 55 | 22"-23 1/2" | 1,500 | 800 | 6 1/2" | 2 1/2" | 31" | Chain (1) | 0000000 | 00000000 | 0000000 | 000000 |
Optional Drum Adapter | 0000000 | Each | 0000000 |
Lift, transport, and place drums without a forklift. A V-style base makes it easy to load and unload drums from pallets and platforms. Swivel casters at the back of the truck make them easy to steer.
Trucks with a gas-spring pump handle have a U-shaped lever that engages the gas spring and ratchet mechanism to lift, hold, and release the drum. The length of the handle provides proper leverage, and the base has built-in counterbalance for stability. Hooks securely hold the drum below the rim.
Trucks with a hydraulic pump handle control lifting and lowering of the drum while a claw-style grabber attaches to the rim of the drum for a secure hold.
Trucks with a hydraulic foot pump have a pedal to control lifting and lowering of the drum while a spring-loaded clamp securely grips the rim of the drum. The legs are retractable for easier maneuvering in tight spaces.
Floor locks and wheel brakes keep trucks stationary during lifting and lowering.
Polypropylene wheels are lightweight and work on smooth surfaces. Phenolic wheels are nonmarking and roll best on smooth surfaces.
For Container | Overall | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Cap., gal. | Dia. | Ht. | Overall Cap., lbs. | Cap. with Retracted Legs, lbs. | Wd. | Ht. | Handle Ht. | Max. Lift | Wheel Configuration | Brake Type | Each | |
Gas-Spring Pump Handle | |||||||||||||
Blue Painted Steel Body with Polypropylene Plastic Wheels | |||||||||||||
Fiber Plastic Steel | 55 | 22"-23 1/2" | 34"-36" | 800 | __ | 49" | 47" | 21"-74 1/2" | 6 1/2" | Two Swivel Casters and Two Axle-Mounted Wheels | None | 00000000 | 0000000 |
Hydraulic Pump Handle | |||||||||||||
Green Painted Steel Body with Front Polypropylene Plastic Wheels and Rear Phenolic Plastic Wheels | |||||||||||||
Steel | 30, 55, 85 | 18"-26" | 26 1/4"-32 1/4" | 800 | __ | 49 7/8" | 61 3/4" | 45" | 20 1/2" | One Swivel Caster and Two Axle-Mounted Wheels | Wheel Brake | 0000000 | 00000000 |
Hydraulic Foot Pump | |||||||||||||
Orange Painted Steel Body with Phenolic Plastic Wheels | |||||||||||||
Fiber Plastic Steel | 30, 55, 85 | 18"-26" | 25 1/2"-40" | 1,100 | 650 | 36 1/4"-41" | 48 1/4"-79 1/2" | 41 1/2" | 20" | Two Swivel and Two Rigid Casters | Floor Lock | 0000000 | 00000000 |
A hydraulic lift raises the drum to the required height, and a manual tilt mechanism positions the drum at the proper angle for emptying. Handlers can rotate the drums 360° in either direction. A drum saddle with chain and ratchet-style tightener secures the drum and a floor lock keeps the handlers stationary.
Styles A and B have a hand-operated hydraulic lift to position the drum at the required height. They require minimal assembly.
Style C have an electric hydraulic lift that raises the drum with the push of a button and positions the drum at the required height. Release the button to stop lifting. The load will not drop in the event of a power failure.
Handlers with a crank handle are best for dispensing at lower heights. Handlers with a chain hand wheel are easier to use at higher dispensing heights.
Optional drum adapters fit inside the saddle to hold 30-gallon drums.
Note: In half-full drums contents shift, which reduces capacity.
Warning: Never use to lift people or items over people.
For Container | O'all Cap., lbs. | Base Leg | O'all | Wheel | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Type | Cap., gal. | Dia. | Full Drum | Half-Full Drum | Dispensing Ht. | Inside Spread | Outside Spread | Wd. | Ht. | Retracted Ht. | Body Color | Dia. | Material | Type | Each | |
Painted Steel | |||||||||||||||||
Crank Handle | |||||||||||||||||
A | Steel | 55 | 22 1/2" | 800 | 500 | 60" | 37" | 44" | 44" | 96" | 55" | Blue | 8" (Front) 4" (Rear) | Polypropylene Plastic (Front) Polyethylene Plastic (Rear) | Solid | 0000000 | 000000000 |
Chain Hand Wheel | |||||||||||||||||
B | Steel | 55 | 22 1/2" | 800 | 500 | 72" | 37" | 44" | 44" | 96" | 55" | Blue | 8" (Front) 4" (Rear) | Polypropylene Plastic (Front) Polyethylene Plastic (Rear) | Solid | 0000000 | 00000000 |
C | Steel | 55 | 22 1/2" | 800 | 500 | 72" | 37" | 44" | 44" | 96" | 55" | Blue | 8" (Front) 4" (Rear) | Polypropylene Plastic | Solid | 0000000 | 00000000 |
Optional Drum Adapter | 0000000 | Each | 0000000 |
With the push of a button, the electric hydraulic lift raises the drum and a chute controls the flow of the material being dispensed to prevent splashes and spills. A clamp on each side of the chute secures the drum. Handlers have a handheld pendant switch and operate only when the push-buttons are engaged. A limit switch turns off the motor when the drum reaches the maximum height. Load will not drop in the event of a power failure. Screw-down floor locks keep handlers stationary during operation.
Warning: Never use to lift people or items over people.
For Container | O'all | Wheel | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Cap., gal. | Dia. | Ht. | O'all Cap., lbs. | Dispensing Ht. | Lg. | Wd. | Ht. | Body Color | Dia. | Material | Type | Each | |
Painted Steel | ||||||||||||||
Fiber, Plastic, Steel | 30, 55 | 19"-24" | 28"-35" | 1,000 | 60" | 80" | 36" | 137 1/4" | Blue | 8" | Phenolic Plastic | Solid | 0000000 | 000000000 |
Instead of tilting these trucks during transport, push on the handle to lift a drum straight off the ground and move it easily over obstacles. Push the handle down to tilt the drum and dispense. They are suited for long distance moves and are easier to move than mobile drum dispensing stands. Trucks have a drum saddle with a chain and ratchet-style tightener to secure the drum. A handle lock prevents unintentional lowering and a tilt lock keeps the drum vertical. Release the tilt lock for mixing. The rear swivel caster makes them easy to steer. Their lightweight polypropylene wheels roll best on smooth surfaces.
For Container | Lift | O'all | Wheel | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Cap., gal. | Dia. | Ht. | O'all Cap., lbs. | Dispensing Ht. | Min. | Max. | Wd. | Ht. | Body Color | Dia. | Material | Type | Each | |
Painted Steel | |||||||||||||||
Steel | 55 | 22 1/2" | 36" | 800 | 17" | 5 1/8" | 11" | 35 1/4" | 66" | Blue | 8" (Front) 4" (Rear) | Polypropylene Plastic | Solid | 0000000 | 0000000 |
Plastic, Steel | 55 | 22 1/2"-24" | 34"-36" | 800 | 17" | 5 1/8" | 11" | 35 1/4" | 66" | Blue | 8" (Front) 4" (Rear) | Polypropylene Plastic | Solid | 0000000 | 000000 |
Because these trucks tilt and roll like a hand truck they are easier to move than mobile drum dispensing stands. They are suited for long distance moves. Tilt them flat to dispense. Handle grips make the handles more comfortable.
Style A have a hook-style grabber that attaches to the rim of the drum for a secure hold and wedges that slide under the drum for easy loading. When in the dispensing position, rollers on the frame allow you to rotate the drum for mixing. For use with steel drums.
Style B has a polyester strap with spring-loaded cinching buckle to secure the drum, extra-wide load wedges for easy loading, and a kickstand to keep the truck standing. They can be used with fiber, plastic, and steel drums.
Use trucks with polypropylene wheels on smooth surfaces. Trucks with rubber wheels absorb shock to roll over smooth or rough surfaces. Trucks with steel wheels are rugged, but noisy and can damage floors. They work best on smooth surfaces.
For Container | O'all | Wheel | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Type | Cap., gal. | Dia. | Ht. | O'all Cap., lbs. | Dispensing Ht. | Wd. | Ht. | Body Color | Dia. | Material | Type | Each | |
Painted Steel | ||||||||||||||
A | Steel | 55, 85 | 18"-26" | 30"-40" | 1,000 | 14" | 25" | 62" | Orange | 10" (Front) 6" (Rear) | Polypropylene Plastic | Solid | 0000000 | 0000000 |
A | Steel | 55, 85 | 18"-26" | 30"-40" | 1,000 | 14" | 25" | 62" | Orange | 10" (Front) 6" (Rear) | Rubber | Tread on Core | 0000000 | 000000 |
A | Steel | 55, 85 | 18"-26" | 30"-40" | 1,000 | 14" | 25" | 62" | Orange | 10" (Front) 6" (Rear) | Steel | Solid | 0000000 | 000000 |
B | Fiber, Plastic, Steel | 30, 55, 85 | 19"-28" | 33"-40" | 1,000 | 16 1/2" | 24" | 57 1/2" | Orange | 10" (Front) 6" (Rear) | Polyolefin Plastic | Tread on Core | 000000000 | 000000 |
B | Fiber, Plastic, Steel | 30, 55 | 17"-23" | 34"-38" | 1,000 | 15" | 23 3/4" | 58" | Orange | 10" (Front) 6" (Rear) | Rubber | Tread on Core | 0000000 | 000000 |
Length | Width | Material | Buckle Type | Each | |
84" | 2" | Polyester | Cam | 00000000 | 000000 |
To quickly check inventory, roll these dollies wherever you need them to weigh and count the contents of drums. Their built-in scale measures weight and has an accurate piece-count mode—even while adding or removing contents from your drum. Dollies have three sensors for reliable readings on uneven floors. For loading heavy drums, they have a low-profile platform. The scale has a rechargeable battery with a USB charging cable.
Platform | Overall | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Container Cap., gal. | Capacity | Accuracy | Graduations | Dia. | Dp. | Material | Ht. | Wd. | Dp. | Wheel Configuration | Wheel Material | No. of Wheel Brakes | Batteries Included | Includes | Each | |
Pounds, Kilograms | ||||||||||||||||
55 | 1,000 lbs. (450 kg) | ±0.2 lbs. (±0.1 kg) | 0.2 lbs (0.1 kg) | 24" | 24" | Steel | 50" | 31" | 43" | One Swivel Caster and Two Axle-Mounted Wheels | Plastic | 1 | Yes | Calibration Instructions, USB Charging Cable | 0000000 | 000000000 |