About Structural Adhesives
More
Drum Patches
Patch drum leaks to prevent their contents from spilling, even if they hold messy and dangerous substances, such as oil, chemicals, and solvents. These patches have a ratcheting buckle for tightening them around the drum to seal the leak. To reuse them, clean them with soap and water.
Spin-Weld Plastic Tank Patches
Repair holes in plastic tanks and containers with these patches. As you spin these patches with a handheld electric router, they melt into the surface of your tank for a seal without any joints. To hold these patches in your router, you’ll need the installation tool (sold separately).
For proper installation, you’ll want to use a hole saw to drill a hole that matches the For Hole Diameter listed and check that your router meets the speed and power requirements shown in the table.
For technical drawings and 3-D models, click on a part number.
For Tank | For Router | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | For Hole Dia. | For Min. Wall Thick. | Material | Material | Surface | Power, hp | Speed, rpm | Temperature Range, °F | Color | For Use With | Each | |
| 2 1/4" | 1.55" | 3/16" | LDPE Plastic | LDPE Plastic | Flat | 1 1/2 | 18,000-25,000 | 40° to 140° | White | Oil, Water | 0000000 | 00000 |
| 3 3/8" | 2.2" | 3/16" | LDPE Plastic | LDPE Plastic | Flat | 1 1/2 | 18,000-25,000 | 40° to 140° | White | Oil, Water | 0000000 | 0000 |
Leak-Repair Patches for Metal
Seal leaks around small holes. Apply adhesive (sold separately) to the center of the patch and press the center of the patch until it clicks. Patches come attached to a fixture that applies continuous pressure while the adhesive cures.
| Material | Dia. | Thick. | For Use Outdoors | Color | Finishing Method | For Use On | Each | |
| Aluminum | 5/8" | 0.005" | Yes | Aluminum | Machine, Drill, Saw | Aluminum | 000000 | 000000 |
| Aluminum | 1 1/4" | 0.005" | Yes | Aluminum | Machine, Drill, Saw | Aluminum | 000000 | 00000 |
| Aluminum | 2" | 0.032" | Yes | Aluminum | Machine, Drill, Saw | Aluminum | 000000 | 00000 |
| 316 Stainless Steel | 2" | 0.09" | Yes | Steel | Machine, Drill, Saw | Stainless Steel | 000000 | 00000 |
| Acrylic Structural Adhesive (0.12 oz. One-Time-Use Packet) | 0000000 | Each | 000000 |
Surface Filler Patches
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
| Mfr. Model No. | Lg. | Wd. | Begins to Harden, min. | Reaches Full Strength | Mix Ratio | For Use Outdoors | Temp. Range, ° F | Color | Finishing Method | For Use On | Each | |
Devcon Zip Patch™ | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 11500 | 4" | 9" | 5 | 4 hrs. | __ | Yes | -40° to 200° | Brown | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Ceramic, Wood | 0000000 | 0000000 |
Surface Fillers | ||||||||||||
| __ | 4" | 6" | 1 | 30 min. | 1:1 | Yes | Not Rated to 425° | Clear | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
Surface Fillers
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Surface Fillers | ||||||||||||
| 8 fl. oz. | Tube | 15 | 3 hrs. | Paste | 50:1 | Not Rated | -40° to 180° | Yellow to Green-Blue | Sand | Fiberglass | 0000000 | 000000 |
Water-Resistant Surface Filler Kits
Everything you need to repair cracked, worn, and damaged surfaces—even underwater.
| Includes | Formulation | Consistency | For Use Outdoors | Temp. Range, °F | Finishing Method | For Use On | Each | |
| 8 One-Time-Use Packets of 101-TS Two-Part Epoxy Filler 0.1-oz. 406 Collodial Silica Filler 0.1-oz. 410 Low-Density Filler Two Brushes Reusable Mixing Stick Three Mixing Cups 15" × 15" Fiberglass Cloth Syringe Dispenser Three Pairs of Disposable Gloves | Epoxy | Thin Liquid | Yes | 35° to 130° | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, ABS Plastic, PVC Plastic, Fiberglass, Wood | 0000000 | 000000 |
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Component | No. of Pieces | Mfr. Model No. | Size | Type | Lg. | Wd. | Each | |
| Two-Part Epoxy | 6 | 101-TS | 0.6 fl. oz. | One-Time-Use Packet | __ | __ | 0000000 | 000000 |
| Resin | 1 | 105 | 1 qt. | Can | __ | __ | 0000000 | 00000 |
| Fast Hardener | 1 | 205 | 7 fl. oz. | Can | __ | __ | 0000000 | 00000 |
| Slow Hardener | 1 | 206 | 7 fl. oz. | Can | __ | __ | 0000000 | 00000 |
| Colloidal Silica Filler | 1 | 406 | 1.7 fl. oz. | Canister | __ | __ | 0000000 | 00000 |
| Colloidal Silica Filler | 1 | 406 | 5.5 fl. oz. | Canister | __ | __ | 0000000 | 00000 |
| Low-Density Filler | 1 | 410 | 5 fl. oz. | Canister | __ | __ | 0000000 | 00000 |
| Mini Dispensing Pump | 3 | 300 | __ | __ | __ | __ | 0000000 | 00000 |
| Fiberglass Cloth | 1 | 745 | __ | __ | 30" | 30" | 0000000 | 00000 |
High-Strength Acrylic Structural Adhesives
With excellent shear strength, these acrylics form stronger bonds than our standard acrylic structural adhesives. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts.
Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Adhesives | ||||||||||||
| 0.12 | One-Time-Use Packet | 30 min. | 24 hrs. | 4,400 | 21 | 8:1 | Thick Liquid (37,220 cP) | -65° to 250° | Green | Metal, Plastic, Rubber | 0000000 | 000000 |