Achieve temperatures as high as 1200° C for heat-treating metal.

76 and 128-cu. in. capacity furnaces have an LED that shows actual or set-point temperature in ° C; an indicator light flashes when set temperature is reached. The safety switch shuts off the furnace when the door is opened.

Program time, temperature, and rate of temperature change. These furnaces reach temperatures as high as 2192° F for heat-treating metal. These furnaces have six programmable parameters: 1) delay start, 2) rate of temperature change, 3) target temperature, 4) temperature timer, 5) memory retrieval, and 6) °C/°F digital display. Link two three-stage programs to create a six-stage operation. A maximum of 10 programs can be stored with up to a seven-day delay. An LCD shows internal temperature, countdown time, and program number.

For technical drawings and 3-D models, click on a part number.

Rapidly dry light-activated adhesives, coatings, and ink, or strengthen 3D-printed parts. With a light intensity five times greater than our bench-top ultraviolet lamp, these chambers cut down curing time to seconds or a few minutes. Also known as flood curing, they create a deep and consistent cure by bouncing light around the chamber walls.

An automatic lamp shutter turns off the light when you open the door, so it protects you from harmful UV rays and reduces emission and flammability concerns. For extra protection, you should always wear UV-protective glasses and clothing when the system is on.

They work just like microwaves. Plug them in, set your time and intensity, and they're ready to cure. Or to remotely monitor and control them, use the D-sub connection and included cord to connect them to a PLC.

Chambers and replacement bulbs cannot be sold to Canada due to regulations limiting mercury content.

For technical drawings and 3-D models, click on a part number.