Container Type Container Type |
|---|
 |  |
| Squeeze Bottle | Aerosol Can |
Trade Name Trade Name |
|---|
|
For Use On For Use On |
|---|
Lubricant Type Lubricant Type |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
About Grease
More
About Lubricants
More
Penetrating Lubricants
Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.
Lubricants with PTFE provide long-lasting lubrication. Lubricants with silicone are clear, have excellent moisture resistance, and can be used on most rubber and plastic. Lubricants with ceramic-reinforced PTFE dissipate heat.
Spray bottles and some lubricants cannot be sold to the listed regions due to regulatory limits on VOCs (volatile organic compounds).
All DuPont Teflon® lubricants contain PTFE for long-lasting lubrication. DuPont Teflon® Multi-Use cures to a semi-dry film that resists corrosion from salt water and won’t wash off. DuPont Teflon® Silicone repels moisture and is nonstaining.
Container | Each | Package | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Additive | Temp. Range, °F | Cannot Be Sold To | Each | Pkg. Qty. | Pkg. | ||
DuPont Teflon® Multi-Use | |||||||||
| 4 | Squeeze Bottle | PTFE | -20° to 250° | __ | 0000000 | 00000 | __ | 000000 | 00 |
| 11 | Aerosol Can | PTFE | -30° to 300° | Canada | 0000000 | 0000 | 6 | 00000000 | 000000 |
DuPont Teflon® Silicone | |||||||||
| 14 | Aerosol Can | PTFE, Silicone | -40° to 400° | Canada | 0000000 | 0000 | 6 | 00000000 | 00000 |
Penetrating Lubricants for Chain
For use with roller chain and other moving metal parts, these thin lubricants cut through dirt, grease, and rust, withstand heavy loads, and resist wear.
Lubricants with moly (molybdenum disulfide) withstand high loads and have excellent wear resistance. Lubricants with PTFE provide long-lasting lubrication.
DuPont Teflon® Chain-Saver penetrates into roller chain links and pins while wet—below 120° F it acts as a dry lubricant that won’t attract dust or dirt; above 120° F it acts as a wet lubricant.
Moisture-Resistant Grease
Formulated to adhere to metal parts and stay in place in wet environments, this grease is commonly used in pulp and paper manufacturing and water management facilities.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Mineral-oil-based grease, derived from petroleum, is usually more economical than synthetic-oil-based grease.
Grease with lithium thickener offers good heat resistance.
Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity.
Grease that cannot be sold to the regions listed is restricted by local chemical regulations and/or product labeling requirements.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Cannot Be Sold To | Each | |
DuPont Teflon® White Lithium—Lithium Thickener | ||||||||||
| 2 | Mineral | PTFE | 11 oz. | Aerosol Can | -10° to 350° | 500° | White | CA, Outside United States | 0000000 | 00000 |
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
DuPont Teflon® White Lithium—Lithium Thickener | |||||||||||
| 2 | Mineral | PTFE | 11 oz. | Aerosol Can | -10° to 350° | 500° | White | CA, Outside United States | 6 | 00000000 | 000000 |
Dry-Film Lubricants
These lubricants go on wet for easy application. Once dry, they form a nonstick film that won't attract dust. Use them for general purpose lubricating in most applications.
Lubricants with PTFE can be used on most rubber and plastic surfaces.
Lubricants that cannot be sold outside the United States are restricted by product labeling requirements.