Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.

Receptacles for outlet boxes fit standard wall plates (not included).

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Receptacles fit standard wall plates (not included).

For technical drawings and 3-D models, click on a part number.

A good fit for tight spaces, these are smaller than standard straight-blade plugs, yet fit into standard-sized sockets and receptacles. Also known as NEMA midget plugs.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Create a streamlined appearance—the flat face lies flush with your wall plate. Receptacles fit standard GFCI wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Eliminate the need for wire stripping; snap-on terminals pierce the insulation. Access the wire connection by opening the hinged housing. Housing is impact-resistant plastic.

Note: The current rating of your plug should not exceed that of your socket.

For technical drawings and 3-D models, click on a part number.

Access the wire connection by opening the hinged housing. The housing is impact-resistant plastic.

Note: The current rating of your plug should not exceed that of your socket.

For technical drawings and 3-D models, click on a part number.

Protect computers and other sensitive equipment from electromagnetic interference (EMI).

Receptacles have a ground terminal that is insulated from the mounting strap so you can run an isolated ground wire through the conduit. Also known as isolated ground receptacles. They fit standard wall plates (not included).

Plugs do not limit EMI on their own. Some are orange to match receptacles.

Note: The current rating of your plug should not exceed that of your receptacle.

For technical drawings and 3-D models, click on a part number.

Check the status of your ground connection—a green light signals that connectors have power and are safely grounded. A red light indicates power only. The lights are visible from any angle for quick identification.

Note: The current rating of your plug should not exceed that of your socket.

For technical drawings and 3-D models, click on a part number.

Internal shutters prevent the insertion of foreign objects and accidental contact with power. Receptacles fit standard wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Visually confirm that connectors have power; they have an indicating light that is visible from any angle.

Note: The current rating of your plug should not exceed that of your socket.

For technical drawings and 3-D models, click on a part number.

Keep personnel safe from electric shock by adding ground fault protection. The housing is impact-resistant plastic.

Receptacles with internal shutters prevent the insertion of foreign objects and accidental contact with power. They fit standard GFCI wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Receptacles protect sensitive equipment from electromagnetic interference (EMI) and spikes in voltage. An isolated ground connection blocks EMI. The indicating light turns green when receptacles have power and are protected. A flashing red light and an audible alarm indicate power but no surge protection. When mated with a plug, receptacles provide an extra-tight fit to remain secure in high-vibration applications. Also known as hospital-grade receptacles. They fit standard GFCI wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Prevent damage to electronic equipment caused by spikes in voltage. An indicating light turns green when receptacles have power and are protected. A flashing red light and an audible alarm indicate power but no surge protection. Receptacles provide an extra-tight fit when mated with a plug to remain secure in high-vibration environments. They're also known as hospital-grade receptacles. All fit standard GFCI wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Suitable for use outdoors, these receptacles can be used in wet and damp environments. They keep personnel safe from electric shock by adding ground fault protection. Internal shutters prevent the insertion of foreign objects and accidental contact with power. The housing is impact-resistant plastic.

For technical drawings and 3-D models, click on a part number.

Add a fuse to protect equipment from current overload. If the current exceeds the fuse rating, the fuse breaks the circuit. Fuse is sold separately.

For technical drawings and 3-D models, click on a part number.

Charge mobile devices without an adapter. Receptacles have two USB ports to connect smartphones and tablet computers. The NEMA slots have internal shutters to prevent the insertion of foreign objects and accidental contact with power. All fit standard GFCI wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Also known as hospital-grade connectors, these have an extra-tight fit when mated to remain secure in high-vibration environments. The housing is impact-resistant plastic.

Plugs and sockets are clear so you can view wire connections. 90° elbow plugs have a rotating face to plug in at any angle.

Duplex receptacles fit standard wall plates (not included).

Quad receptacles have four outlets that are internally connected and can be wired as a single circuit or split into two circuits.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation. Access the wire connection by opening the hinged housing. Also known as hospital-grade plugs, these have an extra-tight fit when mated with sockets or receptacles to remain secure in high-vibration environments. The housing is impact-resistant plastic.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Visually confirm these plugs have power; they have an indicating light that is visible from any angle. Also known as hospital-grade plugs, they have an extra-tight fit when mated with sockets or receptacles to remain secure in high-vibration environments. The housing is impact-resistant plastic.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Add a fuse to protect equipment from current overload. If the current exceeds the fuse rating, the fuse breaks the circuit. Fuse is sold separately. Plugs have an extra-tight fit when mated with sockets or receptacles to remain secure in high-vibration environments. Also known as hospital-grade plugs.

For technical drawings and 3-D models, click on a part number.

Keep personnel safe from electric shock by adding ground fault protection. Also known as hospital-grade receptacles, these have an extra-tight fit when mated with plugs to remain secure in high-vibration environments.

For technical drawings and 3-D models, click on a part number.

A rubber housing protects these connectors from damage caused by drops and impact. They are not intended for use in wet or damp environments.

Note: The current rating of your plug should not exceed that of your socket.

For technical drawings and 3-D models, click on a part number.

Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects sockets from damage caused by drops and impact. They are not intended for use in wet or damp environments.

For technical drawings and 3-D models, click on a part number.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments. The housing is impact-resistant plastic.

Receptacles fit standard wall plates (not included).

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

All connectors have a multiple-ring seal and rubber housing to keep out liquid. They resist heat, oil, and chemicals. When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Connectors that meet IP69K resist high-pressure washdowns.

Plugs mate with female receptacles and female sockets with an attached cover.

Male receptacles mate with female sockets without an attached cover.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Use connectors where ignitable gas and dust may be present. They are UL listed for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups F and G; and Class III hazardous environments.

Note: The current rating of your plug should not exceed that of your receptacle.

For technical drawings and 3-D models, click on a part number.

Keep personnel safe from electric shock by adding ground fault protection. Receptacles mount to DIN rail so you can bring power closer to where you need it. The housing is impact-resistant plastic.

For technical drawings and 3-D models, click on a part number.

Bring power closer to where you need it by mounting receptacles to DIN rail.

For technical drawings and 3-D models, click on a part number.