Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections. Fittings are nylon for excellent impact and abrasion resistance.

For technical drawings and 3-D models, click on a part number.

Fittings have a single barb that creates a smooth clamping surface for extra-tight connections that minimize leaks. Made of acetal, they won’t absorb water and lose strength, even in high-humidity environments.

For technical drawings and 3-D models, click on a part number.

When the size or thread type of a fitting doesn't match an existing opening, use these adapters to make the connection.

Zinc-plated steel adapters have mild corrosion resistance. SAE-LT threads are tapered but designed to be installed into a 1/4"-28 straight-thread UNF hole.

For technical drawings and 3-D models, click on a part number.

Start or stop flow with the flip of a toggle switch or the push of a button. These valves are often used in testing and sampling applications where you need to dispense a small amount of liquid. They fit through a cutout, so the body of the valve stays safe inside your instrumentation panel.

Nickel-plated brass valves resist corrosion better than plain brass valves.

Manual-return valves stay open until you flip the toggle off. Since they don't need to be held open, they’re often used to dispense larger samples than spring-return valves. It’s also easy to check if these valves are open or not based on the toggle’s position. Spring-return valves automatically close when you release the toggle or push button. They’re ideal for intermittent use and precise flow control to prevent spills.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.