Maximum Speed Maximum Speed |
|---|
Speed @ Continuous Operating Torque Speed @ ContinuousOperating Torque |
|---|
|
Starting Torque Starting Torque |
|---|
|
Continuous Operating Torque Continuous Operating Torque |
|---|
|
Mounting Orientation Mounting Orientation |
|---|
|
Shaft Orientation Shaft Orientation |
|---|
|
Direction of Operation Direction of Operation |
|---|
|
Overall Length Overall Length |
|---|
|
|
|
Motor Enclosure Type Motor Enclosure Type |
|---|
|
Full Load Current Full Load Current |
|---|
Motor Type Motor Type |
|---|
|
About Electric Motors
When replacing a motor, use the information on your motor’s nameplate to guide your selection.
More
AC Gearmotors
Gearmotor
Optional Shaft
A motor and speed reducer in one, these gearmotors have hypoid gears for energy-efficient operation. You can use them to turn a shaft on your equipment or add a keyed shaft (sold separately). Wire for clockwise or counterclockwise rotation; instructions are included. Gearmotors meet IP54 for protection from dust and splashed water. They're inverter rated so you can use them with a motor speed control (not included) to adjust the motor speed.
For technical drawings and 3-D models, click on a part number.
Gearmotors | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Output | Optional Keyed Shafts with Key Stock | ||||||||||
| Power, hp | Speed @ Continuous Operating Torque | Full Load Current, A | Lg. | Wd. | Ht. | For Shaft Dia. | Shaft Center to Base | Environmental Rating | Each | Each | ||
230 Volts AC, Three Phase | ||||||||||||
| 1/15 | 7 rpm @ 470 in.-lbs. | 0.39 | 13" | 4" | 6" | 3/4" | 1.91" | IP54 | 0000000 | 0000000 | 0000000 | 000000 |
| 1/8 | 7 rpm @ 900 in.-lbs. | 0.85 | 13 1/2" | 4 3/4" | 6 3/4" | 1" | 2.11" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/8 | 14 rpm @ 440 in.-lbs. | 0.63 | 13" | 4" | 6" | 3/4" | 1.91" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/8 | 14 rpm @ 450 in.-lbs. | 0.85 | 13 1/2" | 4 3/4" | 6 3/4" | 1" | 2.11" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/8 | 28 rpm @ 220 in.-lbs. | 0.63 | 13" | 4" | 6" | 3/4" | 1.91" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/8 | 42 rpm @ 145 in.-lbs. | 0.63 | 13" | 4" | 6" | 3/4" | 1.91" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/8 | 56 rpm @ 105 in.-lbs. | 0.63 | 13" | 4" | 6" | 3/4" | 1.91" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/8 | 84 rpm @ 73 in.-lbs. | 0.63 | 13" | 4" | 6" | 3/4" | 1.91" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/8 | 168 rpm @ 35 in.-lbs. | 0.63 | 13" | 4" | 6" | 3/4" | 1.91" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/5 | 28 rpm @ 360 in.-lbs. | 1.1 | 13 1/2" | 4 3/4" | 6 3/4" | 1" | 2.11" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/5 | 42 rpm @ 240 in.-lbs. | 1.1 | 13 1/2" | 4 3/4" | 6 3/4" | 1" | 2.11" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/5 | 56 rpm @ 180 in.-lbs. | 1.1 | 13 1/2" | 4 3/4" | 6 3/4" | 1" | 2.11" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/5 | 84 rpm @ 120 in.-lbs. | 1.1 | 13 1/2" | 4 3/4" | 6 3/4" | 1" | 2.11" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/5 | 168 rpm @ 60 in.-lbs. | 1.1 | 13 1/2" | 4 3/4" | 6 3/4" | 1" | 2.11" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/4 | 7 rpm @ 1,730 in.-lbs. | 1.55 | 14 1/4" | 5 1/2" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/4 | 14 rpm @ 871 in.-lbs. | 1.55 | 14 1/4" | 5 1/2" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/2 | 27 rpm @ 982 in.-lbs. | 1.9 | 13 3/4" | 6" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/2 | 40 rpm @ 655 in.-lbs. | 1.9 | 13 3/4" | 6" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/2 | 53 rpm @ 487 in.-lbs. | 1.9 | 13 3/4" | 6" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/2 | 80 rpm @ 327 in.-lbs. | 1.9 | 13 3/4" | 6" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/2 | 160 rpm @ 168 in.-lbs. | 1.9 | 13 3/4" | 6" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
230/400-460 Volts AC, Three Phase | ||||||||||||
| 1/8 | 7 rpm @ 900 in.-lbs. | 0.9/0.7-0.6 | 15 1/4" | 4 3/4" | 6 3/4" | 1" | 2.11" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/8 | 14 rpm @ 450 in.-lbs. | 0.9/0.7-0.6 | 15 1/4" | 4 3/4" | 6 3/4" | 1" | 2.11" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/5 | 28 rpm @ 360 in.-lbs. | 1.2/0.9-0.8 | 15 1/4" | 4 3/4" | 6 3/4" | 1" | 2.11" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/5 | 42 rpm @ 240 in.-lbs. | 1.2/0.9-0.8 | 15 1/4" | 4 3/4" | 6 3/4" | 1" | 2.11" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/5 | 56 rpm @ 180 in.-lbs. | 1.2/0.9-0.8 | 15 1/4" | 4 3/4" | 6 3/4" | 1" | 2.11" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/5 | 84 rpm @ 120 in.-lbs. | 1.2/0.9-0.8 | 15 1/4" | 4 3/4" | 6 3/4" | 1" | 2.11" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/5 | 168 rpm @ 60 in.-lbs. | 1.2/0.9-0.8 | 15 1/4" | 4 3/4" | 6 3/4" | 1" | 2.11" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/4 | 7 rpm @ 1,730 in.-lbs. | 1.25/1-0.9 | 16" | 5 1/2" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/4 | 14 rpm @ 871 in.-lbs. | 1.25/1-0.9 | 16" | 5 1/2" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/2 | 27 rpm @ 982 in.-lbs. | 1.94/1-0.9 | 13 3/4" | 6" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/2 | 40 rpm @ 655 in.-lbs. | 1.94/1-0.9 | 13 3/4" | 6" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/2 | 53 rpm @ 487 in.-lbs. | 1.94/1-0.9 | 13 3/4" | 6" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/2 | 80 rpm @ 327 in.-lbs. | 1.94/1-0.9 | 13 3/4" | 6" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
| 1/2 | 160 rpm @ 168 in.-lbs. | 1.94/1-0.9 | 13 3/4" | 6" | 7 3/4" | 1 1/4" | 2.28" | IP54 | 0000000 | 000000 | 0000000 | 00000 |
Base/Face-Mount Compact AC Gearmotors
Sized for small spaces, these gearmotors mount from the base or face for flexibility to fit in tight locations. Each has a motor matched with a speed reducer to lower speed while increasing torque.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Speed, rpm | Torque @ Max. Speed, in.-lbs. | Power, hp | Full Load Current, A | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Each | |
115 Volts AC, Single Phase | |||||||||||
| 1 | 50 | 1/300 | 0.4 | 4 1/2" | 3 1/4" | 3 1/4" | 0.31" | 1" | 1 5/8" | 0000000 | 000000 |
| 3 | 50 | 1/300 | 0.4 | 4 1/2" | 3 1/4" | 3 1/4" | 0.31" | 1" | 1 5/8" | 0000000 | 00000 |
| 5 | 40 | 1/300 | 0.4 | 4 1/2" | 3 1/4" | 3 1/4" | 0.31" | 1" | 1 5/8" | 0000000 | 00000 |
| 10 | 40 | 1/150 | 1 | 4 3/4" | 3 1/4" | 3 1/4" | 0.31" | 1" | 1 5/8" | 0000000 | 00000 |
| 20 | 20 | 1/150 | 1 | 4 3/4" | 3 1/4" | 3 1/4" | 0.31" | 1" | 1 5/8" | 0000000 | 00000 |
| 35 | 15 | 1/120 | 1.2 | 5" | 3 1/4" | 3 1/4" | 0.31" | 1" | 1 5/8" | 0000000 | 00000 |
| 50 | 15 | 1/80 | 1.6 | 5 1/4" | 3 1/4" | 3 1/4" | 0.31" | 1" | 1 5/8" | 0000000 | 00000 |
| 75 | 10 | 1/80 | 1.6 | 5 1/4" | 3 1/4" | 3 1/4" | 0.31" | 1" | 1 5/8" | 0000000 | 00000 |
| 100 | 7 | 1/80 | 1.6 | 5 1/4" | 3 1/4" | 3 1/4" | 0.31" | 1" | 1 5/8" | 0000000 | 00000 |
| 125 | 6 | 1/80 | 1.6 | 5 1/4" | 3 1/4" | 3 1/4" | 0.31" | 1" | 1 5/8" | 0000000 | 00000 |
| 150 | 5 | 1/80 | 1.6 | 5 1/4" | 3 1/4" | 3 1/4" | 0.31" | 1" | 1 5/8" | 0000000 | 00000 |
| 200 | 4 | 1/80 | 1.6 | 5 1/4" | 3 1/4" | 3 1/4" | 0.31" | 1" | 1 5/8" | 0000000 | 00000 |
Face-Mount Compact AC Gearmotors
Power equipment in applications with limited space. Gearmotors have a motor matched with a speed reducer to lower speed while increasing torque.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Speed, rpm | Torque @ Max. Speed, in.-lbs. | Power, hp | Full Load Current, A | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Each | |
115 Volts AC, Single Phase | |||||||||||
| 3 | 50 | 1/300 | 0.4 | 4" | 2 1/2" | 3" | 0.31" | 1" | 2.12" | 0000000 | 000000 |
| 5 | 50 | 1/300 | 0.4 | 4" | 2 1/2" | 3" | 0.31" | 1" | 2.12" | 0000000 | 00000 |
| 10 | 40 | 1/150 | 1 | 4 1/2" | 2 1/2" | 3" | 0.31" | 1" | 2.12" | 0000000 | 00000 |
| 20 | 25 | 1/150 | 1 | 4 1/2" | 2 1/2" | 3" | 0.31" | 1" | 2.12" | 0000000 | 00000 |
| 35 | 20 | 1/120 | 1.2 | 4 3/4" | 2 1/2" | 3" | 0.31" | 1" | 2.12" | 0000000 | 00000 |
| 50 | 15 | 1/80 | 1.6 | 5" | 2 1/2" | 3" | 0.31" | 1" | 2.12" | 0000000 | 00000 |
| 75 | 15 | 1/80 | 1.6 | 5" | 2 1/2" | 3" | 0.31" | 1" | 2.12" | 0000000 | 00000 |
| 100 | 7 | 1/80 | 1.6 | 5" | 2 1/2" | 3" | 0.31" | 1" | 2.12" | 0000000 | 00000 |
| 125 | 6 | 1/80 | 1.6 | 5" | 2 1/2" | 3" | 0.31" | 1" | 2.12" | 0000000 | 00000 |
| 150 | 5 | 1/80 | 1.6 | 5" | 2 1/2" | 3" | 0.31" | 1" | 2.12" | 0000000 | 00000 |
| 200 | 4 | 1/80 | 1.6 | 5" | 2 1/2" | 3" | 0.31" | 1" | 2.12" | 0000000 | 00000 |
Constant-Speed AC Gearmotors
Achieve precise, constant speed for timing and positioning applications. Also known as synchronous gearmotors, these gearmotors use a frequency of 50/60 Hz to maintain speed and torque.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Speed, rpm | Torque @ Max. Speed, in.-lbs. | Power, hp | Full Load Current, A | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Specifications Met | Each | |
110 Volts AC, Single Phase | ||||||||||||
| 1 | 6.9 | 1/200 | 0.2 | 1 1/2" | 2 1/4" | 2 1/2" | 1/4" | 0.26" | 1.99" | UL Recognized Component | 000000 | 000000 |
| 2 | 6.9 | 1/200 | 0.2 | 1 1/2" | 2 1/4" | 2 1/2" | 1/4" | 0.26" | 1.99" | UL Recognized Component | 000000 | 00000 |
| 3 | 6.9 | 1/200 | 0.2 | 1 1/2" | 2 1/4" | 2 1/2" | 1/4" | 0.26" | 1.99" | UL Recognized Component | 000000 | 00000 |
| 5 | 6.9 | 1/200 | 0.2 | 1 1/2" | 2 1/4" | 2 1/2" | 1/4" | 0.26" | 1.99" | UL Recognized Component | 000000 | 00000 |
| 6 | 6.1 | 1/200 | 0.2 | 1 1/2" | 2 1/4" | 2 1/2" | 1/4" | 0.26" | 1.99" | UL Recognized Component | 0000000 | 00000 |
| 7 | 5.2 | 1/200 | 0.2 | 1 1/2" | 2 1/4" | 2 1/2" | 1/4" | 0.26" | 1.99" | UL Recognized Component | 0000000 | 00000 |
| 9 | 3.5 | 1/200 | 0.2 | 1 1/2" | 2 1/4" | 2 1/2" | 1/4" | 0.26" | 1.99" | UL Recognized Component | 0000000 | 00000 |
| 12 | 2.6 | 1/200 | 0.2 | 1 1/2" | 2 1/4" | 2 1/2" | 1/4" | 0.26" | 1.99" | UL Recognized Component | 0000000 | 00000 |
| 20 | 1.8 | 1/200 | 0.2 | 1 1/2" | 2 1/4" | 2 1/2" | 1/4" | 0.26" | 1.99" | UL Recognized Component | 0000000 | 00000 |
Compact Square-Face DC Gearmotors
Drive low-speed, high-torque applications in small spaces. Gearmotors combine a motor and speed reducer to lower speed and increase torque. Wire for clockwise or counterclockwise rotation.
Use a motor speed control (not included) to adjust the motor speed.
To convert AC power to DC power, see AC to DC transformers.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | Insulation | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Speed @ Continuous Operating Torque | Power, hp | Full Load Current, A | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Class | Max. Temp., ° F | Each | |
12 Volts DC | ||||||||||||
| 0.6 rpm @ 800 in.-oz. | 0.0003 | 0.1 | 3 1/4" | 2 3/4" | 3" | 5/16" | 1" | 1.43" | B | 266° | 0000000 | 000000 |
| 1.3 rpm @ 800 in.-oz. | 0.001 | 0.5 | 3 1/2" | 2 3/4" | 3" | 5/16" | 1" | 1.43" | B | 266° | 0000000 | 00000 |
| 4 rpm @ 640 in.-oz. | 0.0025 | 0.7 | 3 1/4" | 2 3/4" | 3" | 5/16" | 1" | 1.43" | B | 266° | 0000000 | 00000 |
| 8 rpm @ 640 in.-oz. | 0.005 | 0.7 | 4" | 2 3/4" | 3" | 5/16" | 1" | 1.43" | B | 266° | 0000000 | 00000 |
| 12 rpm @ 640 in.-oz. | 0.0077 | 1.3 | 3 1/2" | 2 3/4" | 3" | 5/16" | 1" | 1.43" | B | 266° | 0000000 | 00000 |
| 16 rpm @ 400 in.-oz. | 0.0067 | 1.4 | 3 1/2" | 2 3/4" | 3" | 5/16" | 1" | 1.43" | B | 266° | 0000000 | 00000 |
| 25 rpm @ 320 in.-oz. | 0.008 | 1.3 | 3 1/2" | 2 3/4" | 3" | 5/16" | 1" | 1.43" | B | 266° | 0000000 | 00000 |
| 50 rpm @ 160 in.-oz. | 0.008 | 1.2 | 3 1/2" | 2 3/4" | 3" | 5/16" | 1" | 2.08" | B | 266° | 0000000 | 00000 |
24 Volts DC | ||||||||||||
| 1.2 rpm @ 800 in.-oz. | 0.001 | 0.1 | 3 1/4" | 2 3/4" | 3" | 5/16" | 1" | 1.43" | B | 266° | 0000000 | 00000 |
| 4 rpm @ 800 in.-oz. | 0.0033 | 0.4 | 3 1/4" | 2 3/4" | 3" | 5/16" | 1" | 1.43" | B | 266° | 0000000 | 00000 |
| 8 rpm @ 544 in.-oz. | 0.0043 | 0.5 | 3 1/2" | 2 3/4" | 3" | 5/16" | 1" | 1.43" | B | 266° | 0000000 | 00000 |
| 12 rpm @ 384 in.-oz. | 0.0045 | 0.4 | 3 1/2" | 2 3/4" | 3" | 5/16" | 1" | 1.43" | B | 266° | 0000000 | 00000 |
| 17 rpm @ 272 in.-oz. | 0.0045 | 0.5 | 3 1/2" | 2 3/4" | 3" | 5/16" | 1" | 1.43" | B | 266° | 0000000 | 00000 |
| 25 rpm @ 800 in.-oz. | 0.02 | 1.1 | 4" | 2 3/4" | 3" | 5/16" | 1" | 1.43" | B | 266° | 0000000 | 00000 |
| 47 rpm @ 448 in.-oz. | 0.02 | 1.1 | 4" | 2 3/4" | 3" | 5/16" | 1" | 2.08" | B | 266° | 0000000 | 00000 |
Compact Round-Face DC Gearmotors
Power small machinery in spaces where other gearmotors won’t fit. Gearmotors pair a motor with a speed reducer to lower speed while increasing torque.
To control motor speed, motor controls are also available. To convert AC power to DC power, see AC to DC transformers.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | Insulation | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Speed @ Continuous Operating Torque | Power, hp | Full Load Current, A | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Class | Max. Temp., ° F | Each | |
12 Volts DC | ||||||||||||
| 1 rpm @ 175 in.-oz. | 0.0001 | 0.2 | 4 1/4" | 2" | 2" | 1/4" | 3/4" | 1.33" | F | 311° | 0000000 | 0000000 |
| 2 rpm @ 175 in.-oz. | 0.0004 | 0.4 | 4 1/4" | 2" | 2" | 1/4" | 3/4" | 1.33" | F | 311° | 0000000 | 000000 |
| 7 rpm @ 140 in.-oz. | 0.001 | 0.7 | 4 1/4" | 2" | 2" | 1/4" | 3/4" | 1.33" | F | 311° | 0000000 | 000000 |
| 25 rpm @ 47 in.-oz. | 0.001 | 0.7 | 4 1/4" | 2" | 2" | 1/4" | 3/4" | 1.33" | F | 311° | 0000000 | 000000 |
| 83 rpm @ 16 in.-oz. | 0.0012 | 0.7 | 4 1/4" | 2" | 2" | 1/4" | 3/4" | 1.33" | F | 311° | 0000000 | 000000 |
19.1 Volts DC | ||||||||||||
| 21 rpm @ 100 in.-oz. | 0.0021 | 0.5 | 3 3/4" | 1 3/8" | 1 3/8" | 0.19" | 3/4" | 0.95" | F | 311° | 0000000 | 000000 |
| 65 rpm @ 46 in.-oz. | 0.0032 | 0.6 | 3 3/4" | 1 3/8" | 1 3/8" | 0.19" | 3/4" | 0.95" | F | 311° | 0000000 | 000000 |
| 202 rpm @ 16 in.-oz. | 0.0036 | 0.6 | 3 3/4" | 1 3/8" | 1 3/8" | 0.19" | 3/4" | 0.95" | F | 311° | 0000000 | 000000 |
| 625 rpm @ 6 in.-oz. | 0.004 | 0.6 | 3 3/4" | 1 3/8" | 1 3/8" | 0.19" | 3/4" | 0.95" | F | 311° | 0000000 | 000000 |
Extended-Life Compact Round-Face DC Gearmotors
Power small machinery in spaces where other gearmotors won’t fit. Gearmotors pair a motor with a speed reducer to lower speed while increasing torque. Wire for clockwise or counterclockwise rotation.
Use a motor speed control (not included) to adjust the motor speed.
To convert AC power to DC power, see AC to DC transformers.
Gearmotors have ball bearings that withstand heavier loads than gearmotors with sleeve bearings for a longer service life.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | Insulation | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Speed @ Continuous Operating Torque | Power, hp | Full Load Current, A | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Class | Max. Temp., ° F | Each | |
12 Volts DC | ||||||||||||
| 161 rpm @ 374 in.-oz. | 0.0714 | 6.4 | 6 1/4" | 2 1/4" | 2 3/4" | 1/4" | 3/4" | 1" | F | 311° | 0000000 | 0000000 |
| 536 rpm @ 124 in.-oz. | 0.0769 | 6.4 | 6 1/4" | 2 1/4" | 2 3/4" | 1/4" | 3/4" | 1" | F | 311° | 0000000 | 000000 |
24 Volts DC | ||||||||||||
| 161 rpm @ 374 in.-oz. | 0.0714 | 3.2 | 6 1/4" | 2 1/4" | 2 3/4" | 1/4" | 3/4" | 1" | F | 311° | 0000000 | 000000 |
| 536 rpm @ 124 in.-oz. | 0.0769 | 3.2 | 6 1/4" | 2 1/4" | 2 3/4" | 1/4" | 3/4" | 1" | F | 311° | 0000000 | 000000 |
DC Gearmotors
Convert speed to torque to get the power you need—gearmotors are a motor and speed reducer in one. You can wire for clockwise or counterclockwise rotation; instructions are included. Gearmotors transmit motion inline with the motor.
To control motor speed, motor controls are also available. To convert AC power to DC power, see AC to DC transformers.
For technical drawings and 3-D models, click on a part number.
Overall | Shaft | Insulation | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power, hp | Speed @ Continuous Operating Torque | Full Load Current, A | Motor Enclosure Type | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Class | Max. Temp., ° F | Each | |
90 Volts DC | |||||||||||||
| 1/17 | 30 rpm @ 100 in.-lbs. | 0.8 | Totally Enclosed Nonventilated (TENV) | 8 3/4" | 4 1/2" | 5 1/2" | 1/2" | 1" | 3" | F | 311° | 0000000 | 0000000 |
| 1/17 | 60 rpm @ 56 in.-lbs. | 0.8 | Totally Enclosed Nonventilated (TENV) | 8 3/4" | 4 1/2" | 5 1/2" | 1/2" | 1" | 3" | F | 311° | 0000000 | 000000 |
| 1/17 | 100 rpm @ 36 in.-lbs. | 0.8 | Totally Enclosed Nonventilated (TENV) | 8 3/4" | 4 1/2" | 5 1/2" | 1/2" | 1" | 3" | F | 311° | 0000000 | 000000 |
| 1/17 | 150 rpm @ 24 in.-lbs. | 0.8 | Totally Enclosed Nonventilated (TENV) | 8 1/2" | 4 1/2" | 5 1/2" | 1/2" | 1" | 3" | F | 311° | 0000000 | 000000 |
| 1/17 | 300 rpm @ 10 in.-lbs. | 0.8 | Totally Enclosed Nonventilated (TENV) | 8 1/2" | 4 1/2" | 5 1/2" | 1/2" | 1" | 3" | F | 311° | 0000000 | 000000 |
| 1/8 | 31 rpm @ 220 in.-lbs. | 1.3 | Totally Enclosed Nonventilated (TENV) | 11 1/2" | 5" | 5 1/4" | 5/8" | 1 1/2" | 3 1/2" | F | 311° | 0000000 | 000000 |
| 1/8 | 51 rpm @ 130 in.-lbs. | 1.3 | Totally Enclosed Nonventilated (TENV) | 11 1/2" | 5" | 6 1/4" | 5/8" | 1 1/2" | 3 1/2" | F | 311° | 0000000 | 000000 |
| 1/8 | 61 rpm @ 113 in.-lbs. | 1.3 | Totally Enclosed Nonventilated (TENV) | 11 1/2" | 5" | 5 1/4" | 5/8" | 1 1/2" | 3 1/2" | F | 311° | 0000000 | 000000 |
| 1/8 | 94 rpm @ 77 in.-lbs. | 1.3 | Totally Enclosed Nonventilated (TENV) | 11 1/2" | 5" | 5 1/4" | 5/8" | 1 1/2" | 3 1/2" | F | 311° | 0000000 | 000000 |
| 1/8 | 167 rpm @ 43 in.-lbs. | 1.3 | Totally Enclosed Nonventilated (TENV) | 11 1/2" | 5" | 5 1/4" | 5/8" | 1 1/2" | 3 1/2" | F | 311° | 0000000 | 000000 |
| 1/4 | 42 rpm @ 280 in.-lbs. | 2.3 | Totally Enclosed Nonventilated (TENV) | 13 1/4" | 6" | 5 1/2" | 3/4" | 1 5/8" | 4" | F | 311° | 0000000 | 000000 |
| 1/4 | 62 rpm @ 220 in.-lbs. | 2.3 | Totally Enclosed Nonventilated (TENV) | 13 1/4" | 6" | 5 1/2" | 3/4" | 1 5/8" | 4" | F | 311° | 0000000 | 000000 |
| 1/4 | 83 rpm @ 155 in.-lbs. | 2.3 | Totally Enclosed Nonventilated (TENV) | 13 1/4" | 6" | 5 1/2" | 3/4" | 1 5/8" | 4" | F | 311° | 0000000 | 000000 |
| 1/4 | 110 rpm @ 100 in.-lbs. | 2 | Totally Enclosed Nonventilated (TENV) | 13 1/4" | 6" | 5 1/2" | 3/4" | 1 5/8" | 4" | F | 311° | 0000000 | 000000 |
| 1/4 | 165 rpm @ 70 in.-lbs. | 2 | Totally Enclosed Nonventilated (TENV) | 13 1/4" | 6" | 5 1/2" | 3/4" | 1 5/8" | 4" | F | 311° | 0000000 | 000000 |
| 1/2 | 17 rpm @ 1,112 in.-lbs. | 5 | Totally Enclosed Fan Cooled (TEFC) | 16 1/2" | 8 1/4" | 6 1/2" | 3/4" | 1 1/2" | 3" | F | 311° | 0000000 | 000000 |
| 1/2 | 30 rpm @ 822 in.-lbs. | 5 | Totally Enclosed Fan Cooled (TEFC) | 16 1/2" | 8 1/4" | 6 1/2" | 3/4" | 1 1/2" | 3" | F | 311° | 0000000 | 000000 |
| 1/2 | 39 rpm @ 705 in.-lbs. | 5 | Totally Enclosed Fan Cooled (TEFC) | 16 1/2" | 8 1/4" | 6 1/2" | 3/4" | 1 1/2" | 3" | F | 311° | 0000000 | 000000 |
| 1/2 | 57 rpm @ 476 in.-lbs. | 5 | Totally Enclosed Fan Cooled (TEFC) | 16 1/2" | 8 1/4" | 6 1/2" | 3/4" | 1 1/2" | 3" | F | 311° | 0000000 | 000000 |
| 1/2 | 84 rpm @ 320 in.-lbs. | 5 | Totally Enclosed Fan Cooled (TEFC) | 16 1/2" | 8 1/4" | 6 1/2" | 3/4" | 1 1/2" | 3" | F | 311° | 0000000 | 000000 |
Right-Angle DC Gearmotors
A good solution for tight spaces, these gearmotors transmit motion at a 90° angle from the motor, so they’re positioned alongside your application when mounted. Gearmotors combine a motor and speed reducer to lower speed and increase torque.
To control motor speed, motor controls are also available. To convert AC power to DC power, see AC to DC transformers.
For technical drawings and 3-D models, click on a part number.
Gearmotors | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Shaft | Insulation | Optional Conduit Boxes | Replacement Motor Brushes | |||||||||||||
| Power, hp | Speed @ Continuous Operating Torque | Full Load Current, A | Motor Enclosure Type | Lg. | Wd. | Ht. | Dia. | Lg. | Center to Base | Class | Max. Temp., ° F | Each | Each | Each | |||
90 Volts DC | |||||||||||||||||
| 1/17 | 42 rpm @ 22 in.-lbs. | 0.9 | Totally Enclosed Nonventilated (TENV) | 8 3/4" | 4" | 3 3/4" | 1/2" | 1.3" | 1.3" | H | 356° | 00000000 | 0000000 | 00000000 | 000000 | 000000000 | 000000 |
| 1/17 | 62 rpm @ 19 in.-lbs. | 0.9 | Totally Enclosed Nonventilated (TENV) | 8 3/4" | 4" | 3 3/4" | 1/2" | 1.3" | 1.3" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/17 | 116 rpm @ 16 in.-lbs. | 0.9 | Totally Enclosed Nonventilated (TENV) | 8 3/4" | 4" | 3 3/4" | 1/2" | 1.3" | 1.3" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/17 | 222 rpm @ 10 in.-lbs. | 1 | Totally Enclosed Nonventilated (TENV) | 8 3/4" | 4" | 3 3/4" | 1/2" | 1.3" | 1.3" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/17 | 445 rpm @ 5 in.-lbs. | 1 | Totally Enclosed Nonventilated (TENV) | 8 3/4" | 4" | 3 3/4" | 1/2" | 1.3" | 1.3" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/8 | 42 rpm @ 80 in.-lbs. | 1.4 | Totally Enclosed Nonventilated (TENV) | 10 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/8 | 62 rpm @ 70 in.-lbs. | 1.4 | Totally Enclosed Nonventilated (TENV) | 10 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/8 | 122 rpm @ 45 in.-lbs. | 1.4 | Totally Enclosed Nonventilated (TENV) | 10 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/8 | 237 rpm @ 25 in.-lbs. | 1.4 | Totally Enclosed Nonventilated (TENV) | 10 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/8 | 475 rpm @ 13 in.-lbs. | 1.4 | Totally Enclosed Nonventilated (TENV) | 10 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/4 | 60 rpm @ 135 in.-lbs. | 2.3 | Totally Enclosed Nonventilated (TENV) | 12 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/4 | 79 rpm @ 125 in.-lbs. | 2.3 | Totally Enclosed Nonventilated (TENV) | 12 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/4 | 120 rpm @ 90 in.-lbs. | 2.3 | Totally Enclosed Nonventilated (TENV) | 12 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/4 | 233 rpm @ 50 in.-lbs. | 2.3 | Totally Enclosed Nonventilated (TENV) | 12 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 1/4 | 465 rpm @ 30 in.-lbs. | 2.3 | Totally Enclosed Nonventilated (TENV) | 12 3/4" | 5 1/4" | 4 3/4" | 5/8" | 1.8" | 1.67" | H | 356° | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |