Attach these splitters to an extension cord to power multiple devices from one cord.

Add grounding or surge suppression protection.

Minimize the risk of electric shock by adding ground fault protection to a standard outlet.

To run DC-powered lab and medical equipment from your outlet, add a power cord with the plug style and length you need. These adapters meet strict IEC, UL, or ANSI/AAMI standards for use with medical devices.

Couple these adapters with a cord that matches your outlet and length requirements to run DC-powered electronics.

Plug these cords into a vehicle socket to charge devices that run on AC voltage.

Send signal and power to low-current devices with M8 connections near welding, metal machining, and in spots where temperatures change.

These cords have an M8 connector on one end and an M12 connector on the other.

Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked.

All cords have a country-specific plug to power equipment from international outlets.

Carry DC power in or out of electronic devices with these cords. All have industry standard barrel-style connections, letting you power electronics from power supplies.

Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock.

With Kevlar-reinforced nylon armor and a high-strength aluminum connector, these USB cords stand up to frequent use and bending better than standard USB cords.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Often used in robotics, packaging, conveyors, and other applications with constant movement and high temperatures, these silicone rubber cords bend and flex at temperatures up to 325° F.

With a flange on the socket end, you can mount these cords in a panel cutout to move data between computers, printers, and mobile devices.

Connect different pole configurations to join sensors, switches, and other devices to cords, distribution blocks, and I/O modules.

Join M8 connections to M12 connections.

To save space and reduce the number of cords in industrial automation setups, these splitters join two devices with M12 connectors to a single cord, distribution block, or I/O module with M12 connectors.

Modify your M12 or mini connection to match cords and I/O modules in your system.

Simplify wiring and reduce the number of cords in your automation setup.

Charge mobile devices without an adapter.

Power small devices, such as chargers for electronics, from a vehicle. Also known as cigarette-lighter plugs and sockets.

Convert one HDMI size or style to another.

Connect two stereo cords through a panel with these adapters.

Mount these adapters in a panel cutout.

Mount these adapters directly into panel cutouts to attach D-Sub connectors and cords to computers.

Connect two fiber-optic cords that have the same gender and fiber-optic connection type.

Create various data connector configurations by snapping these adapters into the ports of keystone wall plates.

Join two Ethernet cords—these adapters have an RJ45 female connection on both ends.

Transmit data between computers, connect two like cables, or connect devices that have different USB sizes or styles.

Connect two fiber-optic cords that have the same gender and connection type. These adapters mount to panels of any thickness, as long as you drill a mounting hole first.

These panel-mount adapters have a female USB connection on both ends to join two USB cables.

Send video and audio from a single DisplayPort output to multiple displays. These splitters are often used to show the same image on multiple screens or to stretch a computer desktop across two monitors.

Audio/video HDMI connectors and cords are rated IP67 when mated.

Use these connectors and cords to make Ethernet connections in wet location environments.

Connect two female quick-disconnects.

Convert a fixture that uses candelabra-base bulbs to accept medium-base bulbs with these adapters.

Pair these starters with ballasts.

Pair these starters with pulse-start ballasts.

Mount these portable transformers to any flat surface.

Improve the efficiency of your equipment—wire these transformers to step your input voltage up or down by as much as 20%.

These transformers have isolated primary and secondary coils to protect your sensitive equipment from input voltage spikes.

Use with DIN-rail to install wherever you need these transformers or mount them to a panel. They can handle momentary high-inrush current associated with equipment start-up.

Sealed coils protect against dust, dirt, oil, and moisture. These transformers can handle momentary high-inrush current associated with contactors, solenoids, and relays.

Use the included outlet box cover or mount these transformers to a panel. They can handle momentary high-inrush current associated with equipment start-up.

Power low-voltage devices such as alarms and sensors.

Run your motor at 100% or normal power. Also known as rotary converters.

Power multiple devices with different voltages at the same time—these power supplies take AC voltage and convert it into several DC voltages at once.

Monitor voltage, current, remaining life, and other maintenance data from your PC, PLC, or by glancing at the digital display. There's no need to inspect these power supplies with multimeters or other test equipment.

Sized to fit into small and cramped enclosures, these compact power supplies mount onto DIN rails to convert AC to DC voltage. Despite their size, they're designed to power motors, solenoid valves, and other devices that require large start-up current.

These transformers produce AC output that most closely resembles clean, stable AC-generated power.

Completely sealed and protected from dust and water, these power supplies don't need a separate electrical panel or enclosure. Instead, mount them directly to machine tools, process control equipment, conveyors, and other equipment found in harsh industrial areas.

Often used for high-precision and sensitive electronics such as testing and audio equipment, these power supplies produce low output noise for minimal electronic interference.

Convert AC to DC voltage to power equipment in tight spaces—since these power supplies don’t have an enclosure, you can use them inside devices where enclosed power supplies can’t fit.

To power electronics ranging from simple prototypes to complex industrial automation and process control equipment, these general purpose power supplies convert AC to DC voltage.

Suitable for high-speed automated applications, these transformers reverse the magnetic current and release your electromagnet's hold faster than other electromagnet transformers.

When your power supply sends out DC power at a higher voltage than you need, change to the proper voltage with these converters.

Plug thermocouple probes into a control panel.

Attach thermocouple probes with a bayonet connection to a threaded connection.

Add these connectors to thermocouple wire for easy attachment to thermometers and control panels.

Convert AC voltage into the DC voltages needed to test, design, and prototype a wide variety of electrical circuits and equipment.

Ready to mount on DIN rail, these conditioners reduce high AC current, creating an output signal that can be used by panel monitors and other electrical measuring equipment.

Convert a test lead tip style to take a new electrical measurement without switching test leads.

Change AC voltage to DC voltage to power extremely sensitive audio, measuring, and testing devices while keeping electronic interference—often called output or ripple noise—from passing on to the device.