Thicker walls than standard battery terminal lugs make these more durable.

When heat is applied, the flux and solder mixture creates a metallic bond that is nearly twice as strong as crimping or compression connections.

Connect these clamps to a wide range of wire sizes.

Connect these clamps to cable with a crimping tool or by soldering.

Mount these terminals on a threaded screw or stud for a more secure connection than spade and hook terminals.

Mount these elongated ring terminals on a range of screw sizes.

A plastic cover on the barrel provides electrical insulation. These terminals can withstand temperatures up to 300°F.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

When heat is applied, the insulation shrinks and creates a seal that keeps out water, salt, and contaminants.

When heat is applied, the enclosed solder melts, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

Save preparation time—these cords are ready-to-use with ring terminals on each end of a single-conductor wire.

Loosen your mounting screw to install—the open end eliminates the need to completely remove it.

Able to withstand temperatures up to 900°F, these terminals have the highest heat resistance of the spade terminals we offer.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

A plastic cover on the barrel provides electrical insulation.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated. They are rated to 600 volts.

Easy to install, connect, and disconnect, yet difficult to shake loose. These terminals interlock with each other to make a secure connection.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

Add strength and stability to stranded wire to protect it from damage and speed insertion into terminal blocks.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

A plastic cover on the barrel provides electrical insulation.

A hybrid of ring and spade terminals, these install without removing the mounting screw, yet resist being pulled off.

When heat is applied, the insulation shrinks and creates a seal that keeps out water, salt, and contaminants.

Turn screw and stud terminals into quick-disconnect connections.

Compress the barrel twice for an extra-tight grip in high-vibration applications.

An offset tongue gives you extra space to insert wire.

A plastic cover fully insulates these splices.

These splices can withstand higher temperatures than insulated splices.

Filled with grease, these splices resist moisture and corrosion.

When heat is applied, adhesive-lined insulation shrinks and bonds to wires, creating a moisture- and corrosion-resistant seal.

Able to withstand temperatures up to 900°F, these splices are suitable for use in high-heat applications such as ovens, motors, and light fixtures.

Create a water- and corrosion-resistant seal while connecting two different sizes of wire.

These splices can withstand higher temperatures than insulated splices.

For use with a compression tool, these splices are color-coded to match compression dies.

Join wires and cables in some of the dirtiest and wettest locations—from paper mills to marine environments—without special tools.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

Push stripped wire into each end of these splices to make a connection.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

Tap and splice multiple wires in temporarily wet environments and up to six feet underground.

Connect one wire to two wires of the same size. When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a moisture- and corrosion-resistant seal.

Pierce the insulation of wire without stripping it to make quick connections that are also sealed to keep out water.

Twist stripped wires together, insert them into the connector, and then crimp for a dependable connection.

Filled with silicone, these connectors seal out moisture and prevent corrosion.

Rated to 300° F, these connectors are an excellent choice for use in high-temperature applications such as HID lighting and electric heat.

Push stripped wires into connectors for a reliable connection that's faster to install than twisting or crimping.

Soft molding over the wings provides a comfortable grip.

Press down on the clamp to connect wires and pull it up to disconnect.

Tap a main wire or add a finished terminal to the end of a wire.

Taps connect to wires with male quick-disconnect terminals.

No crimping or wire stripping needed—this assortment includes twist-on wire connectors and insulation-piercing wire taps.

Keep a variety of ring terminal sizes on hand.