The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated. They are rated to 600 volts.

Easy to install, connect, and disconnect, yet difficult to shake loose. These terminals interlock with each other to make a secure connection.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

Heat these terminals to shrink the insulation, creating a seal that keeps out water, salt, and contaminants.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

A plastic cover on the barrel provides electrical insulation.

Mount these terminals on a threaded screw or stud for a more secure connection than spade and hook terminals.

The elongated ring can be mounted with a range of screw sizes. A plastic cover on the barrel provides electrical insulation rated to 600 volts.

A plastic cover on the barrel provides electrical insulation. These terminals can withstand temperatures up to 300°F.

When heat is applied, the enclosed solder melts, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

A serrated edge on the inside of the ring grips the mounting screw for a secure hold.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

Add strength and stability to stranded wire to protect it from damage and speed insertion into terminal blocks.

Loosen your mounting screw to install—the open end eliminates the need to completely remove it.

When heat is applied, the enclosed solder melts and the insulation shrinks, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

Also known as bullet terminals, these have a round tab that requires less space than the flat tab found on most quick-disconnect terminals.

These solid pins make it easier to insert stranded wire into screw-clamp connections.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

Turn screw and stud terminals into quick-disconnect connections.

These splices can withstand higher temperatures than insulated splices.

Visually confirm your connection through the inspection window in the insulation of these splices.

Visually confirm your connection through the inspection window.

These splices are filled with a sealant that creates a barrier to completely keep out moisture when splices are crimped.

Able to withstand temperatures up to 900°F, these splices are suitable for use in high-heat applications such as ovens, motors, and light fixtures.

Create a water- and corrosion-resistant seal while connecting two different sizes of wire.

A plastic cover fully insulates these splices.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

Make watertight connections for underground applications.

Sealed threads make these splices weather resistant.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

Connect wire without stripping—these splices pierce insulation.

For use with a compression tool, these splices are color-coded to match compression dies.

Twist stripped wires together, insert them into the connector, and then crimp for a dependable connection.

Press down on the clamp to connect wires and pull it up to disconnect.

Filled with silicone, these connectors seal out moisture and prevent corrosion.

Made of porcelain, these connectors can withstand temperatures up to 1200°F.

Grip the wings on these connectors to increase leverage when tightening.

Suitable for use underground, these connectors consist of a twist-on wire connector and an abrasion- and moisture-resistant insulator tube.

Push stripped wires into connectors for a reliable connection that's faster to install than twisting or crimping.

Tap and splice multiple wires in temporarily wet environments and up to six feet underground.

Use a single splice to connect more than two wires.

Tap a main wire or add a finished terminal to the end of a wire.

Taps connect to wires with male quick-disconnect terminals.

Compress the barrel twice for an extra-tight grip in high-vibration applications.

An offset tongue gives you extra space to insert wire.

Slide these lugs onto cable and strike them with your hammer to create a durable connection.

No crimping or wire stripping needed—this assortment includes twist-on wire connectors and insulation-piercing wire taps.

Keep a variety of ring terminal sizes on hand.

Connect these lugs to cable with a crimping tool or by soldering.

Serrations on both sides lock these lugs in place.

When heat is applied, the flux and solder mixture creates a metallic bond that is nearly twice as strong as crimping or compression connections.

Made of lead, these clamps resist corrosion to stand up to marine environments. Use a lug to attach your cable to the stud.

Connect these clamps to a wide range of wire sizes.