Remotely monitor pressure in general purpose applications such as pumping and compressing systems.

Measure your equipment’s pressure and send the data directly to a development board or single-board computer. Also known as transducers, these transmitters convert pressure into an electrical I²C signal and transmit it to your board.

Choose these transmitters when you need reliable pressure monitoring but not high accuracy.

At least four times as accurate as standard pressure transmitters, these transmitters are ideal for use in laboratories and analytical testing applications.

These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program your receiving device to correct for these factors. They convert pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

Fine-tune the pressure range on these transmitters to account for changes in pressure readings over time.

Adhere to safety standards and monitor pressure when working with high concentrations of oxygen.

The diaphragm on these transmitters mounts flush with your system’s connection, leaving no room for thick liquids to clog or harden. They’re often used to monitor pressure in wastewater, paint, and adhesive-dispensing applications.

Monitor your system’s pressure and vacuum from a smartphone or tablet via Bluetooth. These battery-powered transmitters send alerts if equipment requires your attention, so they’re good for preventative maintenance and route-based monitoring.

These transmitters automatically compensate for error introduced into both pressure and vacuum measurements by vibrations as well as temperature fluctuations, so you do not need to program corrections for these factors into your receiving device. They convert pressure and vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

With an accuracy of ±0.25%, use these transmitters in applications that require highly accurate measurement of both pressure and vacuum, such as activating vacuum pumps.

Measure the difference in pressure between two points in flow applications, such as heating, cooling, and pumping systems.

Often used in HVAC systems and clean room airflow monitoring applications, these transmitters measure the difference in pressure between two low-pressure process lines.

Measure the difference in pressure between two process lines in flow applications such as heat exchangers, chillers, and pumps. These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program your receiving device to correct for these factors.

A digital display allows for easy reading of measurements.

With an accuracy of ±0.05%, these have the highest accuracy of all our test gauges.

Mount these sensors between a robot arm and a tool for precise control during delicate tasks, such as sanding or assembling small parts.