Enclosure Drip Shields
Designed to hang over your enclosure door, these shields protect latches, handles, and other exterior hardware from dripping water and falling dust. Bolt them to the top of your enclosure with the included fasteners—the rubber washer seals the bolt hole to keep water and dust out of your enclosure.
Steel drip shields are powder coated, so they won’t rust under dripping water. Gray is also known as ANSI 61 gray, and light gray is also known as RAL 7035 gray.
304 stainless steel drip shields resist corrosion in wet environments. 316 stainless steel shields stand up to wet environments as well as salt water and harsh chemicals.
For technical drawings and 3-D models, click on a part number.
| Length | Height | Depth | Mounting Fasteners Included | Each | |
Gray Powder-Coated Steel | |||||
|---|---|---|---|---|---|
| 12" | 1" | 3" | Yes | 0000000 | 000000 |
| 16" | 1" | 3" | Yes | 0000000 | 00000 |
| 20" | 1" | 3" | Yes | 0000000 | 00000 |
| 24" | 1" | 3" | Yes | 0000000 | 00000 |
| 30" | 1" | 3" | Yes | 0000000 | 00000 |
| 36" | 1" | 3" | Yes | 0000000 | 00000 |
| 42" | 1" | 3" | Yes | 0000000 | 00000 |
| 48" | 1" | 3" | Yes | 0000000 | 00000 |
| 60" | 1" | 3" | Yes | 0000000 | 00000 |
| 72" | 1" | 3" | Yes | 0000000 | 00000 |
Light Gray Powder-Coated Steel | |||||
| 12" | 1" | 3" | Yes | 0000000 | 00000 |
| 16" | 1" | 3" | Yes | 0000000 | 00000 |
| 20" | 1" | 3" | Yes | 0000000 | 00000 |
| 24" | 1" | 3" | Yes | 0000000 | 00000 |
| 30" | 1" | 3" | Yes | 0000000 | 00000 |
| 36" | 1" | 3" | Yes | 0000000 | 00000 |
304 Stainless Steel | |||||
| 12" | 1" | 3" | Yes | 0000000 | 00000 |
| 16" | 1" | 3" | Yes | 0000000 | 00000 |
| 20" | 1" | 3" | Yes | 0000000 | 000000 |
| 24" | 1" | 3" | Yes | 0000000 | 000000 |
| 30" | 1" | 3" | Yes | 0000000 | 000000 |
| 36" | 1" | 3" | Yes | 0000000 | 000000 |
| 42" | 1" | 3" | Yes | 0000000 | 000000 |
| 48" | 1" | 3" | Yes | 0000000 | 000000 |
| 60" | 1" | 3" | Yes | 0000000 | 000000 |
| 72" | 1" | 3" | Yes | 0000000 | 000000 |
316 Stainless Steel | |||||
| 12" | 1" | 3" | Yes | 0000000 | 000000 |
| 16" | 1" | 3" | Yes | 0000000 | 000000 |
| 20" | 1" | 3" | Yes | 0000000 | 000000 |
| 24" | 1" | 3" | Yes | 0000000 | 000000 |
| 30" | 1" | 3" | Yes | 0000000 | 000000 |
| 36" | 1" | 3" | Yes | 0000000 | 000000 |
| 42" | 1" | 3" | Yes | 0000000 | 000000 |
| 48" | 1" | 3" | Yes | 0000000 | 000000 |
| 60" | 1" | 3" | Yes | 0000000 | 000000 |
| 72" | 1" | 3" | Yes | 0000000 | 000000 |
EMI/RFI-Shielding Enclosure Vents
These conductive aluminum screens block electromagnetic interference (EMI) and radio frequency interference (RFI) to prevent electrical problems such as radio static and faulty signals. Made of mesh, they let air flow through, so the pressure in your enclosure stays constant as temperatures fluctuate.
Screw through the vent frame to mount on the surface of your enclosure. A shielded foam gasket fills the gap between the enclosure and the vent.
Also known as attenuation, interference reduction at frequency measures how much interference is blocked. These vents have high attenuation and work for most applications.
For technical drawings and 3-D models, click on a part number.
For Opening | Overall | Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Width | Height | Width | Height | Depth | Interference Reduction @ Frequency | Frame Material | Screen Material | Mounting Fasteners Included | Number of | Diameter | Each | |
| 2" | 2" | 3" | 3" | 3/4" | 65 dB @ 1 GHz | Chromate-Coated Aluminum | Chromate-Coated Aluminum | No | 4 | 1/4" | 0000000 | 000000 |
| 3" | 3" | 4" | 4" | 3/4" | 65 dB @ 1 GHz | Chromate-Coated Aluminum | Chromate-Coated Aluminum | No | 4 | 1/4" | 0000000 | 00000 |
| 4" | 4" | 5" | 5" | 3/4" | 65 dB @ 1 GHz | Chromate-Coated Aluminum | Chromate-Coated Aluminum | No | 6 | 1/4" | 0000000 | 00000 |
| 5" | 5" | 6" | 6" | 3/4" | 65 dB @ 1 GHz | Chromate-Coated Aluminum | Chromate-Coated Aluminum | No | 8 | 1/4" | 0000000 | 00000 |
| 6" | 4" | 7" | 5" | 3/4" | 65 dB @ 1 GHz | Chromate-Coated Aluminum | Chromate-Coated Aluminum | No | 6 | 1/4" | 0000000 | 00000 |
Enclosure Intake and Exhaust Hoods
These hoods keep your enclosure watertight, even around intake and exhaust cutouts. The silicone seal shuts out water and dust, while the slanted top lets water roll off. When used over fans or vents rated IP54 or higher, hoods meet IP56 and NEMA 4X to help protect your electronics from wet and corrosive environments, dust, and washdowns. They also meet American, Canadian, and European safety standards.
Screw the mounting bracket around your fan or vent, then clip the hood on. Pop it off for cleaning, changing filters, and other maintenance.
Cutout | Overall | Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Height | Width | Height | Width | Depth | Material | Environmental Rating | Mounting Fasteners Included | Number of | Diameter | Specifications Met | Each | |
| 5 1/2" | 5" | 8 3/8" | 7 5/8" | 1 7/8" | Stainless Steel | IP56, NEMA 4X | No | 4 | 0.15" | CE Marked, C-UL Recognized Component, UL Recognized Component | 0000000 | 0000000 |
| 6 3/4" | 6 1/4" | 11" | 8 7/8" | 2 1/4" | Stainless Steel | IP56, NEMA 4X | No | 4 | 0.15" | CE Marked, C-UL Recognized Component, UL Recognized Component | 0000000 | 000000 |
| 9 1/4" | 8 1/2" | 14 1/8" | 11 5/8" | 2 5/8" | Stainless Steel | IP56, NEMA 4X | No | 6 | 0.15" | CE Marked, C-UL Recognized Component, UL Recognized Component | 0000000 | 000000 |
| 11 3/8" | 11 1/4" | 16 3/8" | 14 1/2" | 3" | Stainless Steel | IP56, NEMA 4X | No | 6 | 0.15" | CE Marked, C-UL Recognized Component, UL Recognized Component | 0000000 | 000000 |
| 13 3/8" | 12 3/4" | 19 1/8" | 16 1/8" | 4" | Stainless Steel | IP56, NEMA 4X | No | 6 | 0.15" | CE Marked, C-UL Recognized Component, UL Recognized Component | 0000000 | 000000 |