McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    3 Products

    Heavy Duty EMI/RFI Shielding Conformal Coatings

    Image of Product. Front orientation. Conformal Coatings. Heavy Duty EMI/RFI Shielding Conformal Coatings.
    Coat electronics for durability in tough conditions while blocking EMI/RFI signals. Made of epoxy mixed with silver-coated copper, these coatings are stronger than acrylic plastic EMI/RFI coatings. They are rigid enough to withstand the wear of access panels and industrial cabinets. You can also use them in engine compartments because they resist damage from high temperatures and chemicals. Also known as conductive paint, they shield your parts from interference that could cause circuit malfunction and data loss. Mix the two parts of these compounds together and paint them on components.
    Cannot Be Sold to Canada— These coatings cannot be sold to Canada due to product labeling requirements.
    Dry Time
    Container
    Size, fl. oz.
    Consistency
    Touch,
    min.
    Overall,
    hr.
    Mixing
    Req.
    Interference Reduction
    @ Freq.
    Surface Resistivity,
    ohm/sq.
    Dielectric
    Strength
    Thermal
    Conductivity
    Temp. Range,
    ° F
    Heating Req. to Reach
    Full Strength
    Cure
    Type
    For Use
    Outdoors
    For Use On
    Color
    Cannot Be
    Sold To
    Each
    Silver-Coated Copper Epoxy
     
    Can
    27Thin Liquid54Yes55 dB @ 1 GHz0.31Not RatedNot Rated-40 to 2454 Hrs. @ 150°FHeatNoAluminum, Steel, Stainless Steel, Plastic, Ceramic, Glass, Chrome, Galvanized SteelBrownCanada6606N110000000
     

    Surface Filler Patches

    Image of Product. Front orientation. Surface Fillers. Surface Filler Patches.
    Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
    Temp.
    Range, ° F
    Mfr. Model
    No.
    Container
    Type
    Lg.
    Wd.
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Mixing
    Req.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After Hardening
    For Use On
    Each
    Devcon Zip Patch™
    11500Patch4"9"54NoYes-40200BrownMachine, Drill, Sand, Saw, TapAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Fiberglass, Wood7790A210000000
     

    Epoxy Grout

    Image of Product. Front orientation. Surface Fillers. Epoxy Grout.
    Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals, such as acids, alkalies, salt water, and common solvents and cleaners. Its lightweight formula makes this grout easy to spread. Use in horizontal or vertical joints—grout won’t sag or shrink. Apply with a grout float. It can be cleaned up with water when wet; it doesn’t require a sealer once it cures. The size listed is the combined total of the two parts.
    Container
    Net Wt.,
    lb.
    Type
    Begins to
    Harden, hr.
    Reaches Full
    Strength, day
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    For Max.
    Crack Wd.
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Application
    Temp. Range, ° F
    Color
    For Use On
    Each
    Epoxy Surface Fillers
    1.3Pail73Thick LiquidYes1:11/2"95 ft² @ 1/4"1/2"Yes70 to 85BrownPlaster, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone77105T220000000
     
    back to top