McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    18 Products

    Surface Fillers for Metal

    Image of Product. Front orientation. Surface Fillers. Surface Fillers for Metal, Epoxy, Tube.
    Image of Product. Front orientation. Surface Fillers. Surface Fillers for Metal, Epoxy, Stick.
    Image of Product. Front orientation. Devcon. Surface Fillers for Metal, Jar, Can.

    Epoxy

    Tube

    Epoxy

    Stick

    Jar, Can

    Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
    Devcon Plastic Steel surface fillers can repair areas where brazing and welding is impractical.
    Stick—Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.
    NSF/ANSI 61—NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
    Container
    Temp.
    Range, ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Net
    Wt.
    Type
    Lg.
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    Dia.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Food Industry
    Std.
    Process After Hardening
    For Use On
    Each
    Devcon Plastic Steel® Liquid
    10210—1 lb.Jar, Can—4516Thick LiquidYes9:150 in² @ 1/4"3/4"—Yes-40250Dark Gray—Machine, Drill, Sand, Saw, TapAluminum, Brass, Copper, Stainless Steel, Cast Iron00000000000000
    10220—4 lb.Jar, Can—4516Thick LiquidYes9:1200 in² @ 1/4"3/4"—Yes-40250Dark Gray—Machine, Drill, Sand, Saw, TapAluminum, Brass, Copper, Stainless Steel, Cast Iron00000000000000
     
    Devcon Plastic Steel® Epoxy
    523452—Tube—6024Thick LiquidYes1:114 in² @ 1/4"1/4"—Yes-40200Dark Gray—Machine, Drill, Sand, Saw, TapAluminum, Brass, Copper, Stainless Steel, Cast Iron000000000000
     
    Devcon Plastic Steel® 5 Minute Putty
    10240—1 lb.Jar, Can—516PuttyYes1.7:140 in² @ 1/4"3/4"—Yes-40200Dark Gray—Machine, Drill, Sand, Saw, TapAluminum, Brass, Copper, Stainless Steel, Cast Iron0000000000000
     
    Devcon Stainless Steel Putty
    10270—1 lb.Jar, Can—6016PuttyYes11:150 in² @ 1/4"3/4"—Yes-40250Dark GrayNSF/ANSI 61
    		Machine, Drill, Sand, Saw, TapStainless Steel
    		00000000000000
     
    Epoxy Surface Fillers
    ——4 oz.Stick8"324PuttyYes—16 in² @ 1/4"1/2"1"Yes-40250Dark GrayNSF/ANSI 61
    		Machine, Drill, Sand, TapAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium000000000000
     

    Antislip Protective Coatings

    Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
    Epoxy—Aerosol Can
    Image of Product. Front orientation. Protective Coatings. Antislip Protective Coatings, Epoxy—Aerosol Can.
    Dry Time
    Container
    Net Wt., oz.
    Solution
    Type
    Touch,
    min.
    Overall,
    hr.
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    For Use
    Outdoors
    For Use On
    Color
    Each
    12Solvent Based202415 ft² @ 1 milNo25050 to 90YesAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Iron, Galvanized Iron, Galvanized Steel, Fiberglass, Masonry, Concrete, Stone, Asphalt, WoodGloss Dark Gray00000000000000
     
    Covers
    Each
    Roller Cover for Solvent-Based Coatings000000000000
    Epoxy—Can
    Image of Product. Front orientation. Protective Coatings. Antislip Protective Coatings, Epoxy—Can.
    Apply gallon-sized solvent-based coatings with a notched trowel, sprayer, or a roller cover for thick coatings (sold separately).
    Dry Time
    Container
    Size, gal.
    Solution
    Type
    Touch,
    hr.
    Overall,
    day
    Approx. Coverage,
    ft²
    Mixing
    Req.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    Specs.
    Met
    For Use
    Outdoors
    For Use On
    Primer Req. for Use On
    Color
    Each
    1Solvent Based12350No16050 to 120ASTM F609YesAluminum, Steel, Iron, Fiberglass, Concrete, WoodAluminum, Steel, Iron, Concrete, WoodFlat Dark Gray000000000000000
     
    Covers
    Each
    Roller Cover for Solvent-Based Coatings000000000000

    Powder-Coating Touch-Up Paint for Metal

    Image of Product. Front orientation. Paint. Powder-Coating Touch-Up Paint for Metal.
    Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.
    Cannot Be Sold to Canada—This paint cannot be sold to Canada due to chemical regulations.
    Dry
    Time, hr.
    Each
    Container
    Net Wt., oz.
    Solution
    Type
    Touch
    Overall
    Approx. Coverage
    @ Thk.
    Spray
    Position
    Max. Temp.,
    ° F
    For Use
    Outdoors
    For Use On
    Cannot Be
    Sold To
    Color
    (Appearance)
    1-5
    6-Up
    Acrylic Plastic—Aerosol Can
    16Solvent Based424144 ft² @ 2 milUpright120YesAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Iron, Galvanized Iron, Galvanized Steel, Titanium, SilverCanadaDark Gray (Gloss)000000000000000000
     

    Paint for Metal

    Image of Product. Front orientation. Paint. Paint for Metal, Can.

    Can

    Paint metal surfaces to stop rust from starting and prevent existing rust from spreading. Scrape rusty areas clean before application. Although primer is not required for use on all materials, it can be used to prepare any surface to maximize the life and corrosion resistance of paint.
    Acrylic Plastic—Acrylic plastic paint is water-based and can be cleaned up with soap and water. It’s also known as latex paint.
    1 gal. Container—Apply paint in a one-gallon can with a brush, roller, or sprayer.
    Paint
    Primers
    Dry Time
    Container
    Size, gal.
    Solution
    Type
    Touch,
    min.
    Overall,
    hr.
    Approx. Coverage
    @ Thk.
    Max. Temp.,
    ° F
    For Use
    Outdoors
    For Use On
    Color
    (Appearance)
    Each
    Color
    Each
    Acrylic Plastic—Can
    1Water Based304270 ft² @ 2 mil120YesAluminum, Steel, Iron, Galvanized Iron, Galvanized Steel, Masonry, Concrete, WoodDark Gray (Gloss)000000000000Gray000000000000
     

    Heavy Duty Vehicle-Grade Antislip Protective Coatings

    These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction. Apply with a roller. The resin and hardener come in separate containers that can be mixed in the pail. The size listed is the combined total of the two parts. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).
    Epoxy—Can
    Image of Product. Front orientation. Protective Coatings. Heavy Duty Vehicle-Grade Antislip Protective Coatings, Epoxy—Can.
    Dry Time
    Container
    Size, gal.
    Solution
    Type
    Touch,
    hr.
    Overall,
    day
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Application Time
    After Mixing, hr.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    Mil. Spec.
    For Use
    Outdoors
    For Use On
    Primer Req. for Use On
    Color
    Cannot Be Sold To
    Each
    1Solvent Based24425 ft² @ 2 milYes816040 to 100MIL-PRF-24667 Type II Composition G, MIL-PRF-24667 Type IV Composition GYesAluminum, Steel, Iron, Concrete, WoodAluminum, Steel, Iron, Concrete, WoodFlat Dark GrayLos Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA00000000000000
     
    Epoxy—Pail
    Image of Product. Front orientation. Protective Coatings. Heavy Duty Vehicle-Grade Antislip Protective Coatings, Epoxy—Pail.
    MIL-PRF-24667 Type I Composition G—Coatings that meet MIL-PRF 24667 Type 1 are our most wear and impact resistant. They can also be applied with a notched trowel.
    Dry Time
    Container
    Size, gal.
    Solution
    Type
    Touch,
    hr.
    Overall,
    day
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Application Time
    After Mixing, hr.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    Mil. Spec.
    For Use
    Outdoors
    For Use On
    Primer Req. for Use On
    Color
    Cannot Be Sold To
    Each
    5Solvent Based244125 ft² @ 2 milYes416040 to 100MIL-PRF-24667 Type I Composition G, MIL-PRF-24667 Type II Composition GYesAluminum, Steel, Iron, Concrete, WoodAluminum, Steel, Iron, Concrete, WoodFlat Dark GrayLos Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA00000000000000
    5Solvent Based244125 ft² @ 2 milYes816040 to 100MIL-PRF-24667 Type II Composition G, MIL-PRF-24667 Type IV Composition GYesAluminum, Steel, Iron, Concrete, WoodAluminum, Steel, Iron, Concrete, WoodFlat Dark GrayLos Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA0000000000000
     

    Vehicle-Grade Antislip Protective Coatings

    Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface. Apply with a notched trowel, roller, or sprayer. The size listed is the combined total of the two parts. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).
    Epoxy—Can
    Image of Product. Front orientation. Protective Coatings. Vehicle-Grade Antislip Protective Coatings, Epoxy—Can.
    Dry Time
    Container
    Size, gal.
    Solution
    Type
    Touch,
    hr.
    Overall,
    day
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Application Time
    After Mixing, hr.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    Specs. Met
    For Use
    Outdoors
    For Use On
    Cannot Be Sold To
    Color
    Each
    1Solvent Based12340 ft² @ 2 milYes416050 to 130ADA Compliant, ASTM F609YesAluminum, Steel, Iron, Fiberglass, Concrete, WoodLos Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CAFlat Dark Gray00000000000000
     
    Epoxy—Pail
    Image of Product. Front orientation. Protective Coatings. Vehicle-Grade Antislip Protective Coatings, Epoxy—Pail.
    Coatings in a pail have a resin and a hardener in separate containers that can be mixed in the pail.
    Dry Time
    Container
    Size, gal.
    Solution
    Type
    Touch,
    hr.
    Overall,
    day
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Application Time
    After Mixing, hr.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    Specs. Met
    For Use
    Outdoors
    For Use On
    Cannot Be Sold To
    Color
    Each
    5Solvent Based123200 ft² @ 2 milYes416050 to 130ADA Compliant, ASTM F609YesAluminum, Steel, Iron, Fiberglass, Concrete, WoodLos Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CAFlat Dark Gray00000000000000
     

    Drip-Free Paint for Metal

    Image of Product. Front orientation. Paint. Drip-Free Paint for Metal.
    This acrylic plastic paint produces a thick, durable finish that won’t run or drip as it dries. For best results, use a primer with new or rusted metal and with new wood.
    Dry
    Time, min.
    Each
    Container
    Net Wt., oz.
    Solution
    Type
    Touch
    Overall
    Approx. Coverage
    @ Thk.
    Spray
    Position
    Max. Temp.,
    ° F
    For Use
    Outdoors
    For Use On
    Color
    (Appearance)
    1-5
    6-Up
    Acrylic Plastic—Aerosol Can
    12Water Based123015 ft² @ 1 milUpright150YesAluminum, Steel, Iron, WoodDark Gray (Gloss)000000000000000000
     
    back to top