These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.

Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

Fix damaged wood or build up and replace missing wood.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

Even when used under water, these adhesives maintain their strength.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

For invisible bond lines, these adhesives dry clear.

These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.

Permanently set threaded rods, studs, and rebar in concrete.

When concrete is saturated or submerged in water, use these adhesives to form strong bonds.

Bond and repair nosing and stair treads with this thick, two-part epoxy.

Dispense two-part adhesives with compressed air. Use these guns only with 3M dual cartridges.