Replace worn flat and V jaws.

Use these vises for general purpose workholding.

For large workpieces, these vises open three times as wide as standard tilting-head vises. Tilt and lock the head to position work at an angle.

Two vise heads tilt and rotate 360°, locking in place to hold work at any angle.

Designed for outdoor use, these vises have a finish that resists corrosion.

Hold tiny workpieces in these compact vises.

Quickly install and remove the clamp-on base from a benchtop.

Clamp tubing into these holders to keep it steady while you cut, flare, or expand the end.

Insert these one-piece grooved liners between vise jaws to hold small-diameter material vertically.

Quickly move parallels in and out of these jaws to raise your workpiece within the vise. Mount jaws to the vise, slide the mating parallels in place, and rest your workpiece on top.

Hardened for wear resistance, these steel jaws are replacements for the ones that come installed on your vise.

Arrange the included pins in a series of holes to position a part at any angle and hold odd-shaped parts securely.

Mount to a machine table to rotate a vise 360° in 1° increments.

Push the handle to slide the jaw into place for quicker setup than standard drill-press vises.

Use the adjustment dials to ensure your work is accurately positioned on X and Y axes.

The base and three sides of the vise are ground flat, enabling mounting on its base, either side, or upright.

Mount these workstops into slotted vise jaws—they hold workpieces in place and prevent horizontal movement during machining.

Compressed air controlled by a foot pedal allows hands‐free operation. Use these vises in production applications with frequent insertion and removal of workpieces.

Tilt the head on two axes and rotate the base to position your workpiece at almost any angle.

Secure small parts in spring clamps to keep hands free for soldering, gluing, and assembly.

Steel jaws secure round workpieces such as pipe, tubing, and conduit.

Set up the tripod wherever you need to work.

Rotate work 360° and precisely position it on X- and Y-axes by turning the handles.

Precisely position work on X- and Y-axes using the handles.

Stronger and with greater load capacities than gooseneck-style positioning arms, these arms keep their shape even when moving or when exposed to vibration. They’re often used in robotics and conveyor applications when frequent repositioning isn’t required.

Ball-and-socket connections allow 360° positioning.

Add a mounting surface to an any-which-way positioning arm.

A suction base makes it easy to move and attach these arms to smooth surfaces such as glass and polished metal.

These durable tables won't warp or splinter. They can be configured at a custom height.

Often used in laboratories and food-processing areas, these tables withstand repeated washdowns and resist damage from grease and chemicals. They can be configured for either seated or standing tasks.

With a thick steel frame and a capacity of at least 10,500 lbs., these welded tables are our strongest and most durable adjustable-height tables. They can be configured for either seated or standing tasks.

Adjust these tables from 18" to 24" to customize the height of machinery and equipment.

Adjust the shelves to accommodate a computer and other electronic equipment.

Change any desk or table into a stand-up-height work surface.

Mix and match components to design an office work area that can be reconfigured as needed.

Keyhole slots in the legs allow you to adjust the height of these workbenches in 1 1/2" increments.

An electric motor and a hydraulic pump lift loads with the push of a button.

These tables are compact, yet provide the lifting capacity of standard lift tables.

The tabletop can go as low as 3", making loading and unloading from the floor and pallets easier.

These tables come ready to operate.

These tables have a foot lever and hydraulic pump to raise loads and either a hand valve or hand lever for controlled lowering.

An extra-long, reinforced tabletop gives you plenty of room for oversized loads.

A battery-operated motor and a hydraulic pump do the work for you; they lift loads with the push of a button.

An air cylinder automatically returns the stand to your set height as you add or remove parts of the load.

Also known as sleeve-bearing turntables or slewing-ring bearings.

Lock into one of four positions. To unlock, pull the ring on the spring-loaded locking pin.

Built-in detents slow or stop the rotation of the turntable at specified intervals for repeatable positioning.

Simplify tasks such as spray painting, repair work, and inspection. These turntables rotate to expose every side of an object while working.

Place these turntables on a bench top to raise an object above the surface for better access to all sides while working.

These jacks are often used to position small shop and laboratory equipment.

The head rotates 360° and tilts up and down.

Bend and wrap the legs around almost anything while keeping a level mounting surface.

Multiple joints allow up/down and in/out movement in addition to 360° rotation. These arms are often used to hold exhaust hose in place.

Secure indicators, upright posts, attachments, and holding rods at any angle.

Adjust the flexible arm to nearly any position.

Use a swivel clamp to attach an indicator to the positioning arm.

For more versatility than other low-profile holders, this holder has six locations for mounting indicators and accessories, including two mounting holes and four places to mount an indicator lug back with the included thumb screws.

The base is comprised of adjustable magnetic pins which allow it to conform to any shape and grip most metal surfaces.

Attach the C-clamp on this holder to your Bridgeport J head to take indicator measurements without obstructing the cutting tool.

Adjust the flexible arm to nearly any position.

Adjust the flexible arm to nearly any position.

Crank a handle or pump a foot pedal to raise and lower loads.

Sectional or telescoping masts on these trucks allow you to lift loads higher than standard lift trucks. Crank the handle to raise and lower loads.

A hydraulic pump powered by a rechargeable battery raises and lowers the load with the push of a button.