Search Results
For Holding For Holding |
|---|
|
|
Shank Type Shank Type |
|---|
|
Grip Range Grip Range |
|---|
|
Component Component |
|---|
|
ER-32 Collets
Install into an ER-32 collet chuck or holder to tightly grip round-shank tool bits in milling machines.
| Size | Grip Range | Workpiece Dia. Tolerance | Max. Body Dia. | Approximate Dia. Compression | Overall Lg. | Material | Each | |
Round | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/8" | 0.109"-0.125" | -0.0001" to 0.0001" | 1.3" | 1/32" | 1.57" | Hardened Steel | 0000000 | 000000 |
| 3/16" | 0.156"-0.187" | -0.0001" to 0.0001" | 1.3" | 1/32" | 1.57" | Hardened Steel | 0000000 | 00000 |
| 1/4" | 0.219"-0.250" | -0.0001" to 0.0001" | 1.3" | 1/32" | 1.57" | Hardened Steel | 0000000 | 00000 |
| 5/16" | 0.281"-0.312" | -0.0001" to 0.0001" | 1.3" | 1/32" | 1.57" | Hardened Steel | 0000000 | 00000 |
| 11/32" | 0.312"-0.344" | -0.0001" to 0.0001" | 1.3" | 1/32" | 1.57" | Hardened Steel | 0000000 | 00000 |
| 3/8" | 0.344"-0.375" | -0.0001" to 0.0001" | 1.3" | 1/32" | 1.57" | Hardened Steel | 0000000 | 00000 |
| 7/16" | 0.406"-0.437" | -0.0001" to 0.0001" | 1.3" | 1/32" | 1.57" | Hardened Steel | 0000000 | 00000 |
| 1/2" | 0.469"-0.500" | -0.0001" to 0.0001" | 1.3" | 1/32" | 1.57" | Hardened Steel | 0000000 | 00000 |
| 5/8" | 0.594"-0.625" | -0.0001" to 0.0001" | 1.3" | 1/32" | 1.57" | Hardened Steel | 0000000 | 00000 |
| 3/4" | 0.719"-0.750" | -0.0001" to 0.0001" | 1.3" | 1/32" | 1.57" | Hardened Steel | 0000000 | 00000 |
Collet Chucks
CAT 40 Taper
Securely hold collets in the spindle of a milling machine.
Use a nut wrench (sold separately) to tighten the chuck nut and secure the tool bit in the collet.
ER-32 Collet Stands
Overall | Mounting Slot | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Number of Collets | Ht. | Wd. | Dp. | No. of | Wd. | Lg. | Material | Each | |
| 40 | 2" | 9 1/8" | 17" | 2 | 1/4" | 1 1/16" | Steel | 0000000 | 000000 |
Quick-Change Tool Holders for Milling Machines
After installing the R8 body in the milling machine spindle, tool holders can be switched out in seconds. To remove a tool holder, depress the brass locking button and rotate the collar on the R8 body. When a new tool holder is inserted, a spring-loaded pin snaps the collar back into the locked position.
R8 Body
R8 Taper Shank Thread | ||||||
|---|---|---|---|---|---|---|
| TIR (Total Indicated Runout) Accuracy | Gender | Size | Spindle Overhang | Material | Each | |
| 0.0005" | Female | 7/16"-20 | 1 1/8" | Steel | 0000000 | 0000000 |
Collet Holder
Head | For Collet | |||||
|---|---|---|---|---|---|---|
| Lg. | Dia. | Type | Max. Size | Material | Each | |
| 1 15/16" | 1 31/32" | ER-32 | 3/4" | Steel | 0000000 | 0000000 |
Tool Holder Stand
Overall | ||||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | For Number of Tools | Number of Mounting Holes | Mounting Hole Dia. | Material | Each | |
| 1 1/2" | 8 3/4" | 12 1/4" | 10 | 4 | 3/16" | Steel | 0000000 | 0000000 |