Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

Designed to spin freely with the slightest breeze, these fans create a vacuum that draws air out from buildings and ventilation systems—no electricity required.

These light duty fans are designed for use without duct.

These fans come complete with a movable-blade louver. The louvers are gravity operated so they open only when air flows through them, which prevents backdrafts.

Better suited for dirty, dusty, and damp environments than standard direct-drive fans, these have a totally enclosed motor enclosure.

Better suited for dirty, dusty, and damp environments than standard belt-drive fans, these have a totally enclosed motor enclosure.

Also known as room-to-room exhaust fans, these exhaust air and humidity directly into another room.

Keep noise to a minimum with 1/2" thick acoustical insulation and vibration-resistant motor mounts.

Insert these fans directly into your ductwork. They give small heaters and air conditioners a boost to circulate air through ductwork.

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

Mount these fans into a hole in your ductwork.

Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged.

Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged.

In addition to using the handle to carry these exhausters, you can mount them to a wall, bench, or floor.

The arm length adjusts from 3 to 6 feet making these exhaust hoses good for locations with low ceilings.

Position these exhausters above drums, tanks, and distillers.

These blowers have a motor that is UL listed for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups F and G hazardous locations.

Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard blowers can handle.

For resistance to chemicals as well as corrosion, these blowers have a plastic housing.

Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard hazardous location spark-resistant blowers can handle.

A 304 stainless steel housing offers good corrosion resistance.

Use your compressed air source to power these blowers.

In addition to blowing twice as much air as other portable blowers, these have a motor that is UL listed for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups E, F, and G hazardous locations.

To quickly dry flat surfaces, these fans direct air downward.

Create a more concentrated stream of air than enclosure-cooling fans to cool equipment faster.

Expandable fan trays come with three fans but can hold up to nine for greater airflow.

Also known as crossflow blowers, these create a wider stream of air than other equipment-cooling blowers.

Kits include a fan, guard, and power cord. They keep heat-sensitive equipment such as electronic components cool.

For use in tight spaces where other equipment-cooling blowers won't fit, air enters through the center of the unit and then expels along the edges.

With the addition of a thermostat, the fans in these kits switch on only when needed.

Filters remove dust and other particles from the air.

Operate these fans with a DC power source.

Cool heat-sensitive electronics without having to hardwire your fan—these kits include the fan, guard, and power cord.

Create a more concentrated stream of air than equipment-cooling fans to blow away the heat generated by electronic equipment, induction heaters, and high-wattage bulbs.

Use these mufflers with air-powered tools, valves, and cylinders to reduce noise and filter exhaust fumes.

These mufflers can be cleaned for an extended service life.

In addition to a filter, these mufflers have a wool felt disc to trap oil mist.

These mufflers exhaust through narrow holes on one end to provide a concentrated blast of air. Use them to eject items from your conveyor and direct exhaust away from delicate applications.

Replace your muffler less often—these have a filter design that stays clean longer than porous mufflers.

Install these mufflers in air-powered drills and other loud equipment. They filter exhaust fumes and reduce noise by 30-35 dB, a reduction that's equivalent to putting in earplugs.

Protect the health of nearby workers and maintain ideal operating conditions for your 3D printer. To keep your workspace's air clean, these enclosures filter harmful fumes, VOCs, and ultrafine particles that are common when working with filaments such as ABS and nylon.