McMaster-Carr logo
    Filter by
    Number of Jaws
    Puller Material
    Jaw Control Type
    Jaw Profile
    Jaw Tip Location
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forcing Screw Thread Pitch
    Adjustment Hole Diameter
    Number of Adjustment Holes
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    142 Products

    Quick-Hold External-Grip Gear and Bearing Pullers

    Jaws stay aligned, so you can secure bearings and pulleys quickly. Use these pullers to grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
    Two Jaws with Tips on One End
    Image of Product. Cage Control. Front orientation. Gear and Bearing Pullers. Quick-Hold External-Grip Gear and Bearing Pullers , Two Jaws with Tips on One End, Cage Control.
    Image of Product. Top orientation. Gear and Bearing Pullers. Quick-Hold External-Grip Gear and Bearing Pullers , Two Jaws with Tips on One End, Spring-Loaded Control.

    Cage

    Control

    Spring-Loaded

    Control

    Pullers with two jaws have a flatter profile than pullers with more jaws, so they can fit in tighter spaces.
    Cage Control—Pullers with a cage keep the jaws aligned.
    Spring-Loaded Control—Pullers with spring-loaded jaws automatically center their jaws and move in unison, allowing for quick one-handed use. This also prevents the misalignment that can occur with self-locking jaws. Spring tension holds the jaws against the object being pulled.
    Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
    Pullers
    Replacement Jaws
    Replacement
    Jaw Heads
    Replacement Pins
    Forcing Screw
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    T-Handle
    Material
    Material
    Overall
    Lg.
    Thread Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    Includes
    Each
    Each
    Each
    Each
    Cage Control
    1/4" to 3 1/4"2 1/4"1SteelSteelSteel5 1/2"5/16"-24
    		2 3/4"11/32" × 1/8"Forcing Screw
    T-Handle    		000000000000000000000000000000000000000000000000000000
    1/4" to 4 1/4"3"2SteelSteelSteel7"3/8"-24
    		3 1/2"5/16" × 3/16"Forcing Screw
    T-Handle    		00000000000000———0———0———0
    1/2" to 5"4"2SteelSteelSteel9 5/8"9/16"-16
    		5"5/8" × 3/16"Forcing Screw
    T-Handle    		00000000000000000000000000000000000000000000000000000
    1/2" to 7"6"6SteelSteelSteel12 3/4"5/8"-14
    		7 1/4"3/4" × 1/4"Forcing Screw
    T-Handle    		00000000000000000000000000000000000000000000000000000
    3/4" to 12"8"12SteelSteelSteel16 1/4"3/4"-14
    		9 1/2"7/8" × 9/32"Forcing Screw
    T-Handle    		00000000000000000000000000000000000000000000000000000
    1" to 15"9 5/8"14SteelSteelSteel19 1/4"3/4"-14
    		11"1" × 11/32"Forcing Screw
    T-Handle    		00000000000000000000000000000000000000000000000000000
    1 1/2" to 30"20"25SteelSteelSteel26 1/4"1 1/8"-14
    		12"25/32" × 13/32"Forcing Screw
    T-Handle    		0000000000000000———0———0———0
    2 1/4" to 15 3/4"16"12SteelSteelSteel16 1/2"3/4"-14
    		17 1/2"11/16" × 7/16"Forcing Screw
    T-Handle    		00000000000000———0———0———0
    2 1/2" to 18"12"25SteelSteelSteel26"1 1/8"-14
    		14"1 1/4" × 1/2"Forcing Screw
    T-Handle    		000000000000000000000000000000000000000000000000000000
    3" to 25"14"35SteelSteelSteel31 1/2"1 1/4"-14
    		16 3/4"1 7/16" × 11/16"Forcing Screw
    T-Handle    		000000000000000000000000000000000000000000000000000000
     
    Spring-Loaded Control
    1/2" to 3 7/8"3 7/8"3Steel—Steel5 3/4"M12 × 1.5 mm5 1/4"21/32" × 1/8"Forcing Screw0000000000000———0———0———0
    3/4" to 4 3/4"4 3/4"5Steel—Steel6 7/8"M14 × 1.5 mm6 1/2"11/16" × 1/8"Forcing Screw00000000000000———0———0———0
    7/8" to 6 3/8"6 3/8"6Steel—Steel9"M18 × 1.5 mm8 1/2"13/16" × 1/8"Forcing Screw00000000000000———0———0———0
    7/8" to 9 7/8"7 7/8"7Steel—Steel11"5/8"-14
    		10 1/4"1 1/8" × 3/16"Forcing Screw00000000000000———0———0———0
    7/8" to 11 7/8"9 7/8"10Steel—Steel12 5/8"5/8"-14
    		13 1/2"1 1/8" × 3/16"Forcing Screw00000000000000———0———0———0
    7/8" to 14 3/4"11"10Steel—Steel16 5/8"5/8"-14
    		14 3/4"1 1/8" × 3/16"Forcing Screw00000000000000———0———0———0
     
    Three Jaws with Tips on One End
    Image of Product. Front orientation. Gear and Bearing Pullers. Quick-Hold External-Grip Gear and Bearing Pullers , Three Jaws with Tips on One End, Cage Control.
    Image of Product. Top orientation. Gear and Bearing Pullers. Quick-Hold External-Grip Gear and Bearing Pullers , Three Jaws with Tips on One End, Spring-Loaded Control.

    Cage

    Control

    Spring-Loaded

    Control

    Pullers with three jaws are more stable and distribute their pulling force more evenly than pullers with two jaws. Use them when space allows.
    Cage Control—Pullers with a cage keep the jaws aligned.
    Spring-Loaded Control—Pullers with spring-loaded jaws automatically center their jaws and move in unison, allowing for quick one-handed use. This also prevents the misalignment that can occur with self-locking jaws. Spring tension holds the jaws against the object being pulled.
    Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
    Pullers
    Replacement Jaws
    Replacement
    Jaw Heads
    Replacement Pins
    Forcing Screw
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    T-Handle
    Material
    Material
    Overall
    Lg.
    Thread Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    Includes
    Each
    Each
    Each
    Each
    Cage Control
    1/4" to 3 1/4"2 1/4"1SteelSteelSteel5 1/2"5/16"-24
    		2 3/4"1/4" × 1/8"Forcing Screw
    T-Handle    		000000000000000———0———0———0
    1/4" to 4 1/2"3"2SteelSteelSteel7"3/8"-24
    		3 1/2"7/16" × 3/16"Forcing Screw
    T-Handle    		000000000000000000000000000000000000000000000000000000
    1/2" to 5"4"5SteelSteelSteel9 5/8"9/16"-16
    		5"5/8" × 3/16"Forcing Screw
    T-Handle    		00000000000000000000000000000000000000000000000000000
    1/2" to 7"6"10SteelSteelSteel12 3/4"5/8"-14
    		7 1/4"3/4" × 1/4"Forcing Screw
    T-Handle    		00000000000000000000000000000000000000000000000000000
    3/4" to 12"8"17SteelSteelSteel16 1/4"3/4"-14
    		9 1/2"7/8" × 9/32"Forcing Screw
    T-Handle    		00000000000000000000000000000000000000000000000000000
    1" to 15"9 5/8"20SteelSteelSteel19 1/4"3/4"-14
    		11"1" × 11/32"Forcing Screw
    T-Handle    		00000000000000000000000000000000000000000000000000000
    2" to 38"26"40SteelSteelSteel31 3/4"1 1/4"-14
    		27 3/4"7/8" × 15/32"Forcing Screw
    T-Handle    		000000000000000———0———0———0
    2 1/4" to 22"16"17SteelSteelSteel16 1/2"3/4"-14
    		17 1/2"11/16" × 7/16"Forcing Screw
    T-Handle    		0000000000000000———0———0———0
    2 1/2" to 18"12"30SteelSteelSteel26"1 1/8"-14
    		14"1 1/4" × 1/2"Forcing Screw
    T-Handle    		000000000000000000000000000000000000000000000000000000
    3" to 25"14"40SteelSteelSteel31 1/2"1 1/4"-14
    		16 3/4"1 7/16" × 11/16"Forcing Screw
    T-Handle    		00000000000000000000000000000000000000000000000000000000
     
    Spring-Loaded Control
    1/2" to 3 7/8"3 7/8"4Steel—Steel5 3/4"M12 × 1.5 mm5 1/4"21/32" × 1/8"Forcing Screw00000000000000———0———0———0
    3/4" to 4 3/4"4 3/4"6Steel—Steel6 7/8"M14 × 1.5 mm6 1/2"11/16" × 1/8"Forcing Screw00000000000000———0———0———0
    7/8" to 6 3/8"6 3/8"8Steel—Steel9"M18 × 1.5 mm8 1/2"13/16" × 1/8"Forcing Screw00000000000000———0———0———0
    7/8" to 9 7/8"7 7/8"10Steel—Steel11"5/8"-14
    		10 1/4"1 1/8" × 3/16"Forcing Screw00000000000000———0———0———0
    7/8" to 11 7/8"9 7/8"10Steel—Steel12 5/8"5/8"-14
    		13 1/2"1 1/8" × 3/16"Forcing Screw00000000000000———0———0———0
    7/8" to 14 3/4"11"10Steel—Steel16 5/8"5/8"-14
    		14 3/4"1 1/8" × 3/16"Forcing Screw00000000000000———0———0———0
    7/8" to 23 5/8"13 3/4"10Steel—Steel20 5/8"5/8"-14
    		20 1/2"1 9/32" × 3/16"Forcing Screw0000000000000000———0———0———0
     

    External-Grip Gear and Bearing Pullers

    Grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
    Two Jaws with Tips on One End
    Image of Product. Front orientation. Gear and Bearing Pullers. External-Grip Gear and Bearing Pullers, Two Jaws with Tips on One End.
    Forcing Screw
    Adjustment
    Holes
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    T-Handle
    Material
    Material
    Overall
    Lg.
    Thread
    Size
    Pipe
    Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    No.
    of
    Dia.
    Includes
    Each
    0" to 3 3/16"3 3/16"1 1/2SteelSteelSteel4.92"M9 × 1.5 mm—4 1/32"13/32" × 13/64"111/64"Forcing Screw with T-Handle00000000000000
    1 1/32" to 9 7/8"8 5/8"7 1/2Steel—Steel8 21/32"1/2"-14
    		—10 5/8"15/16" × 45/64"213/32"Forcing Screw00000000000000
    1 1/2" to 11 7/8"11 1/32"11Steel—Steel11 13/16"—3/4
    		13 57/64"1 3/16" × 45/64"231/64"Forcing Screw00000000000000
    1 1/2" to 15 3/4"15 3/4"11Steel—Steel15 3/4"—3/4
    		18 7/64"1 3/16" × 25/32"331/64"Forcing Screw00000000000000
    1 1/2" to 19 3/4"21"13Steel—Steel15 3/4"—3/4
    		24 21/64"1 3/16" × 25/32"331/64"Forcing Screw00000000000000
     
    Two Jaws with Tips on Both Ends
    Image of Product. Front orientation. Gear and Bearing Pullers. External-Grip Gear and Bearing Pullers, Two Jaws with Tips on Both Ends.
    Pullers with jaw tips on both ends have a different jaw tip size on each end for versatility in fitting bearings, gears, and wheels.
    Forcing Screw
    Adjustment
    Holes
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Overall
    Lg.
    Thread Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. × Jaw Tip Thk.
    No.
    of
    Dia.
    Includes
    Each
    5/8" to 3 7/8"3"1 1/2SteelSteel3 11/32"M12 × 1.5 mm4 5/64"7/16" × 15/64", 7/16" × 15/64"21/4"Forcing Screw00000000000000
    3/4" to 5 7/8"3 3/8"5 1/2SteelSteel5 5/16"M14 × 1.5 mm4 23/32"19/32" × 9/32", 23/64" × 9/32"221/64"Forcing Screw00000000000000
    1 1/32" to 8 5/8"5 1/8"7.5SteelSteel8 21/32"1/2"-14
    		8 29/64"1 1/32" × 9/32", 25/32" × 9/32"213/32"Forcing Screw00000000000000
     
    Three Jaws with Tips on One End
    Image of Product. Puller with T-Handle. Front orientation. Gear and Bearing Pullers. External-Grip Gear and Bearing Pullers, Three Jaws with Tips on One End, Forcing Screw with T-Handle.
    Image of Product. Puller. Front orientation. Gear and Bearing Pullers. External-Grip Gear and Bearing Pullers, Three Jaws with Tips on One End, Forcing Screw.

    Puller with

    T-Handle

    Puller

    Forcing Screw
    Adjustment
    Holes
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    T-Handle
    Material
    Material
    Overall
    Lg.
    Thread
    Size
    Pipe
    Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    No.
    of
    Dia.
    Includes
    Each
    1/2" to 3 3/16"3 3/16"1 1/2SteelSteelSteel4 9/64"M9 × 1.5 mm—4 1/32"7/16" × 13/64"111/64"Forcing Screw with T-Handle00000000000000
    1 1/2" to 15 3/4"15 3/4"11Steel—Steel15 3/4"—3/4
    		18 7/64"1 3/16" × 25/32"331/64"Forcing Screw00000000000000
    1 1/2" to 19 3/4"19 1/4"13Steel—Steel15 3/4"—3/4
    		24 21/64"1 3/16" × 25/32"231/64"Forcing Screw00000000000000
     
    Combination 2/3 Jaws with Tips on One End
    Image of Product. Front orientation. Gear and Bearing Pullers. External-Grip Gear and Bearing Pullers, Combination 2/3 Jaws with Tips on One End.
    Pullers with combination 2/3 jaws have mounting holes in both a 2-jaw and 3-jaw configuration, so you can attach the jaws either way to suit your application.
    Forcing Screw
    Adjustment
    Holes
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Overall
    Lg.
    Thread
    Size
    Pipe
    Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    No.
    of
    Dia.
    Includes
    Each
    1 1/32" to 11 7/8"8 5/8"7 1/2SteelSteel8 21/32"1/2"-14
    		—18 7/64"15/16" × 45/64"331/64"Forcing Screw000000000000000
    1 1/2" to 15 3/4"11 1/32"11SteelSteel12 11/16"—3/4
    		13 29/32"1 3/16" × 11/16"—1/2"Forcing Screw00000000000000
    1 1/2" to 17 3/4"15 3/4"11SteelSteel16 5/8"—3/4
    		18 3/32"1 3/16" × 3/4"31/2"Forcing Screw00000000000000
     
    Combination 2/3 Jaws with Tips on Both Ends
    Image of Product. Front orientation. Gear and Bearing Pullers. External-Grip Gear and Bearing Pullers, Combination 2/3 Jaws with Tips on Both Ends.
    Pullers with combination 2/3 jaws have mounting holes in both a 2-jaw and 3-jaw configuration, so you can attach the jaws either way to suit your application.
    Pullers with jaw tips on both ends have a different jaw tip size on each end for versatility in fitting bearings, gears, and wheels.
    Forcing Screw
    Adjustment
    Holes
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Overall
    Lg.
    Thread Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. × Jaw Tip Thk.
    No.
    of
    Dia.
    Includes
    Each
    5/8" to 4 3/4"3"1.5SteelSteel3 11/16"M12 × 1.5 mm4 5/64"7/16" × 15/64", 7/16" × 15/64"21/4"Forcing Screw00000000000000
    3/4" to 7 1/8"3 3/8"5.5SteelSteel5 5/16"M14 × 1.5 mm4 23/32"19/32" × 9/32", 23/64" × 9/32"121/64"Forcing Screw00000000000000
    1 1/32" to 11 1/32"5 1/8"7 1/2SteelSteel8 21/32"1/2"-14
    		8 15/32"1 1/32" × 9/32", 3/4" × 9/32"13/8"Forcing Screw00000000000000
     

    Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets

    Image of Product. Front orientation. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets , Narrow Jaw—Bar Control.

    Narrow Jaw—Bar Control

    Image of Product. Front orientation. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets , Standard and Narrow Jaw—Bar Control.

    Standard and Narrow Jaw—Bar Control

    To quickly grip objects from either the outside or inside, all the pullers in these sets have reversible jaws that stay aligned. They’re often used to pull bearings and pulleys. To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out.
    The pullers in these sets can either be used with two or three jaws. Use two jaws for tight spots where three jaws won’t fit. When space allows, pullers with three jaws are more stable and more evenly distribute pulling force compared to pullers with two jaws.
    Narrow Jaw—Narrow pullers have both narrow jaws and narrow jaw tips to grip objects in tight spaces.
    Bar Control—Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
    Combination 2/3 Jaw—Pullers with combination 2/3 jaws have mounting holes in both a 2-jaw and 3-jaw configuration, so you can attach the jaws either way to suit your application.
    Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
    Forcing Screw
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Thread Size
    Includes
    Each
    Narrow Jaw—Bar Control
     
    Two Jaws and Combination 2/3 Jaws with Tips on One End
    5 1/2SteelSteelM14 × 1.5 mmQuick-Hold 2-Jaw Reversible External/Internal Grip Puller
    Three Sets of Narrow-Profile Jaws (For 2 3/4"-7 1/8" ID, For 1 1/16"-5 1/8" OD, 3 15/16"-9 13/16" Reach)
    Set of Jaw Extensions (3 15/16" Long)
    Forcing Screws (1 of each: 6 5/16" Long, 9 13/16" Long)
    2-to-3 Jaw Converter
    Grease
    Plastic case    		00000000000000
     
    Standard and Narrow Jaw—Bar Control
     
    Two Jaws and Combination 2/3 Jaws with Tips on One End
    7 1/2SteelSteel1/2"-14
    		Quick-Hold 2-Jaw Reversible External/Internal Grip Puller
    One Set of Narrow-Profile Jaws (For 3 7/8"-10 1/4" ID, For 1 3/8"-7 7/8" OD, 5 15/16"-11 13/16" Reach)
    One Set of Standard-Profile Jaws (For 3 7/8"-10 1/4" ID, For 1 3/8"-7 7/8" OD, 5 15/16"-11 13/16" Reach)
    Two Sets of Jaw Extensions (5 15/16" Long)
    Forcing Screws (1 of each: 8 5/16" Long, 14" Long)
    2-to-3 Jaw Converter
    Grease
    Plastic case    		000000000000000
     

    Economy External-Grip Gear and Bearing Pullers

    This low-capacity puller is often used to remove corroded battery terminals.
    Two Jaws with Tips on One End
    Image of Product. Front orientation. Gear and Bearing Pullers. Economy External-Grip Gear and Bearing Pullers.
    Forcing Screw
    For OD
    Reach
    Lg.
    Wt. Cap.,
    lb.
    Puller
    Material
    T-Handle
    Material
    Material
    Overall
    Lg.
    Thread
    Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    Includes
    Each
    3/4" to 1 1/2"1 3/4"12SteelSteelSteel4 5/8"3/8"-16
    		4"3/16" × 3/16"Forcing Screw with T-Handle00000000000
     

    High-Force External-Grip Gear and Bearing Puller Sets

    Image of Product. Front orientation. Gear and Bearing Pullers. High-Force External-Grip Gear and Bearing Puller Sets .
    Move the immovable—these puller sets include a hand pump and hydraulic cylinder, so you can create a large amount of pulling force. However, these pullers produce more direct, constant thrust than pullers with a forcing screw. They have mounting holes in both a 2- and 3-jaw configuration for attaching the jaws either way. The jaws have no control mechanism, so they swing free.
    45 ton Capacity—Pullers with a 45 ton capacity can be used to grip bearings, gears, and wheels from the outer edge to pull them off a shaft.
    Wt. Cap.,
    ton
    Puller
    Material
    Includes
    Each
    17 1/2Steel3-Jaw External-Grip Hydraulic Puller (For Up To 20" OD, 11 1/2" Reach Length)
    Face-Grip Hydraulic Puller with End Caps (For 5 3/4"-11 3/4" OD, 18 1/2" Reach Length)
    3-to-2 Jaw Head Converter for 3-Jaw External-Grip Hydraulic Puller
    Adjusting Screw
    Bearing Separator (1/2"-9" Spread)
    Crank Handle
    Hose Half Coupler with Dust Cap
    Hydraulic Cylinder (2" Stroke)
    Hydraulic Hose - 6 Feet
    Internal-Grip Jaw Attachment (For 1 1/2"-9" OD, 4" Reach Length) for 3-Jaw External-Grip Hydraulic Puller
    Pair of Legs (22 1/2" Reach Length) for Face-Grip Puller
    Pressure Gauge
    Single Stage Hydraulic Hand Pump Assembly
    Tee Adapter
    Three Threaded Adapters
    Two Pushing Adapters
    Wood Case    		0000000000000000
    45Steel2-Jaw External Grip Hydraulic Puller—45-ton Capacity (For Up to 18" OD, 27 1/2" Reach)
    3-Jaw External Grip Hydraulic Puller—50-ton Capacity (For Up to 18" OD, 27 1/2" Reach)
    3-to-2 Jaw Head Converter for 3-Jaw External-Grip Hydraulic Puller
    Adjusting Screw
    Crank Handle
    Hose Half Coupler with Dust Cap
    Hydraulic Cylinder (3" Stroke)
    Hydraulic Hose - 6 Feet
    Pressure Gauge
    Single Stage Hydraulic Hand Pump Assembly
    Tee Adapter
    Metal Case    		0000000000000000

    Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers

    With reversible jaws that stay aligned, these pullers can quickly grip objects from the outside or inside. They’re often used to pull bearings and pulleys. To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out.
    Two Jaws with Tips on One End
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Two Jaws with Tips on One End, Standard Jaw—Bar Control.
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Two Jaws with Tips on One End, Narrow Jaw—Bar Control.

    Standard Jaw—Bar Control

    Narrow Jaw—Bar Control

    Two-jaw pullers have a slimmer profile than pullers with more jaws, so they fit in tighter spaces.
    Narrow Jaw—Narrow pullers have both narrow jaws and narrow jaw tips to grip objects in tight spaces.
    Bar Control—Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
    Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
    Forcing Screw
    For ID
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Overall
    Lg.
    Thread Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    Includes
    Each
    Standard Jaw—Bar Control
    3 3/4" to 6 1/4"1/2" to 5"3 7/8"5SteelSteel7 1/4"M14 × 1.5 mm4"13/16" × 1/8"Forcing Screw00000000000000
    4" to 4 3/4"1/4" to 3 1/2"3 7/8"5SteelSteel7 1/4"M14 × 1.5 mm4"13/16" × 1/8"Forcing Screw0000000000000
    4" to 8 3/4"1/2" to 6 1/4"5 7/8"10SteelSteel10"1/2"-14
    		6"15/16" × 3/16"Forcing Screw0000000000000
    4" to 10 1/4"1/2" to 7 3/4"5 7/8"10SteelSteel10"1/2"-14
    		6"15/16" × 3/16"Forcing Screw0000000000000
    7" to 13 1/2"0" to 9 3/4"7 7/8"12SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 5/32"Forcing Screw0000000000000
    7" to 17 1/4"0" to 13 3/4"7 7/8"12SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 5/32"Forcing Screw0000000000000
    7 3/4" to 23 1/4"1/2" to 20 1/2"11 7/8"15SteelSteel17 3/4"1"-1111 3/4"1 3/8" × 5/32"Forcing Screw000000000000000
     
    Narrow Jaw—Bar Control
    2 3/4" to 5 1/2"1/4" to 3 1/2"3 7/8"4 1/2SteelSteel7 1/4"M14 × 1.5 mm4"1 3/16" × 1/8"Forcing Screw0000000000000
    2 3/4" to 7"1/4" to 4 3/4"3 7/8"4 1/2SteelSteel7 1/4"M14 × 1.5 mm4"1 3/16" × 1/8"Forcing Screw0000000000000
    4" to 8 3/4"3/4" to 6 1/4"5 7/8"9 1/2SteelSteel10"1/2"-14
    		6"1 1/4" × 5/32"Forcing Screw0000000000000
    4" to 10 1/4"3/4" to 7 3/4"5 7/8"9 1/2SteelSteel10"1/2"-14
    		6"1 1/4" × 5/32"Forcing Screw0000000000000
    7" to 13 1/2"3/4" to 9 3/4"7 7/8"11 1/2SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 1/4"Forcing Screw0000000000000
    7" to 17 1/4"3/4" to 13 3/4"7 7/8"11 1/2SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 1/4"Forcing Screw0000000000000
     
    Three Jaws with Tips on One End
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Three Jaws with Tips on One End, Standard Jaw—Bar Control.
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Three Jaws with Tips on One End, Narrow Jaw—Bar Control.

    Standard Jaw—Bar Control

    Narrow Jaw—Bar Control

    Three-jaw pullers are more stable and more evenly distribute pulling force than two-jaw pullers. Use them when space allows.
    Narrow Jaw—Narrow pullers have both narrow jaws and narrow jaw tips to grip objects in tight spaces.
    Bar Control—Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
    Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
    Forcing Screw
    For ID
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Overall
    Lg.
    Thread Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    Includes
    Each
    Standard Jaw—Bar Control
    2 3/4" to 5 1/2"0" to 3 1/2"3 7/8"6 1/2SteelSteel6 1/4"M14 × 1.5 mm4"13/16" × 1/8"Forcing Screw00000000000000
    2 3/4" to 7"0" to 5"3 7/8"6 1/2SteelSteel6 1/4"M14 × 1.5 mm4"13/16" × 1/8"Forcing Screw0000000000000
    4" to 8 3/4"0" to 6 1/4"5 7/8"11 1/2SteelSteel10"1/2"-14
    		6"15/16" × 3/16"Forcing Screw0000000000000
    4" to 10 1/4"0" to 7 3/4"5 7/8"11 1/2SteelSteel10"1/2"-14
    		6"15/16" × 3/16"Forcing Screw0000000000000
    7" to 13 1/2"0" to 9 3/4"7 7/8"13 1/2SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 5/32"Forcing Screw0000000000000
    7" to 17 1/4"4 1/4" to 14 3/4"7 7/8"13 1/2SteelSteel17 3/4"1"-117 3/4"1 3/8" × 5/32"Forcing Screw0000000000000
    8 3/4" to 19 3/4"4 1/4" to 14 3/4"11 7/8"16 1/2SteelSteel17 3/4"1"-1111 3/4"1 3/8" × 5/32"Forcing Screw000000000000000
    8 3/4" to 19 3/4"4 1/4" to 14 3/4"19 3/4"16 1/2SteelSteel17 3/4"1"-1119 3/4"1 3/8" × 5/32"Forcing Screw000000000000000
    11" to 23 1/2"5" to 20 1/2"19 3/4"22SteelSteel16 3/8"1 1/8"-1119 3/4"1 3/8" × 5/32"Forcing Screw000000000000000
    11 1/2" to 29 1/4"6" to 25 1/2"19 3/4"22SteelSteel16 3/8"1 1/8"-1119 3/4"1 3/8" × 5/32"Forcing Screw000000000000000
     
    Narrow Jaw—Bar Control
    2 3/4" to 5 1/2"1/4" to 3 1/2"3 7/8"6SteelSteel6 1/4"M14 × 1.5 mm4"1 3/16" × 1/8"Forcing Screw0000000000000
    2 3/4" to 7"1/4" to 5"3 7/8"6SteelSteel6 1/4"M14 × 1.5 mm4"1 3/16" × 1/8"Forcing Screw0000000000000
    4" to 8 3/4"3/4" to 6 1/4"5 7/8"11SteelSteel10"1/2"-14
    		6"1 3/16" × 1/8"Forcing Screw0000000000000
    4" to 10 1/4"3/4" to 7 3/4"5 7/8"11SteelSteel10"1/2"-14
    		6"1 3/16" × 1/8"Forcing Screw0000000000000
    7" to 13 1/2"0" to 9 3/4"7 7/8"13SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 1/4"Forcing Screw0000000000000
     
    Combination 2/3 Jaws with Tips on One End
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Combination 2/3 Jaws with Tips on One End, Standard Jaw—Spring-Loaded Control.

    Standard Jaw—Spring-Loaded

    Control

    Combination 2/3-jaw pullers have mounting holes in both a two-jaw and three-jaw configuration, so you can attach the jaws either way. Lift up the base to add or remove jaws.
    Spring-Loaded Control—Pullers with spring-loaded jaws lock in place for quick one-hand operation. Spring tension holds the jaws against the object being pulled, so you can tighten the locking nut.
    Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
    Pullers
    Replacement
    Forcing Screws
    Forcing Screw
    For ID
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Overall
    Lg.
    Thread Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    Includes
    Each
    Each
    Standard Jaw—Spring-Loaded Control
    3" to 4"3" to 4"4"2SteelSteel8 3/4"M15 × 2 mm4"9/16" × 3/16"Forcing Screw000000000000000000000000000
    3" to 7"3" to 7"7"5SteelSteel11 3/4"M18 × 2.5 mm7"7/8" × 1/4"Forcing Screw0000000000000000000000000
     

    Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets with Locking Storage Box

    Image of Product. Front orientation. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets with Locking Storage Box .
    Complete with a locking cabinet, use the pullers in this set to tackle a wide variety of pulling jobs—use pullers to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
    Wt. Cap., ton
    Puller
    Material
    Includes
    Each
    5 1/2 to 7 1/2SteelInternal Extractor (for 1/2"-1-7/8" ID, 1-1/2" Reach)
    Six Cap Screws (3 of each: 3/8"-24 × 3" Lg., 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller
    Steel Locking Cabinet (25 3/4" Height, 29 1/2" Width, 10" Depth)
    2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/4"-6 3/4" ID, For 1/4"-6" OD, 4-3/4" Reach) with Slide Hammer
    Adjustable Face-Grip Puller (For 3 1/4"-9 5/8" OD) with 6 3/4” Long Forcing Screw
    Adjustable Face-Grip Puller (For 3/4"-4 1/4" OD) with 4 1/4” Long Forcing Screw
    Combination 2/3-Jaw External Grip Puller—7 1/2-ton Capacity (For Up To 10 1/2" OD, 5" Reach)
    Combination 2/3-Jaw External Grip Puller—5 1/2-ton Capacity (For Up To 7" OD, 3 1/4" Reach)
    Two Sets of Long-Reach Jaws (Three Jaws for 5 1/2-ton Capacity Puller and Three Jaws for 7-ton Capacity Puller)
    Bearing Separator (1/4"-1 3/4 Spread)
    Bearing Separator (3/4"-4 1/4" Spread)    		00000000000000000
     

    Pitman Arm Pullers

    Image of Product. Front orientation. Pitman Arm Pullers.
    The compact design of these pullers allows easy access to remove your steering linkage (pitman arm).
    Jaw
    Tip
    Forcing
    Screw
    For OD
    Reach
    Lg.
    Puller
    Material
    Forcing Screw
    Material
    Wd.
    Thk.
    Jaw Opening
    Wd.
    Overall
    Lg.
    Thread
    Size
    Each
    2 Jaws with Tips on One End
    1 1/2" to 2 1/2"2 5/16"SteelSteel1 1/4"1/4"1 21/64"3 1/2"5/8"-18
    		0000000000000
     

    Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets

    Image of Product. Front orientation. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets, Two Jaws—Bar Control.
    Image of Product. Two Jaws and Combination 2/3 Jaws. Front orientation. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets, Two Jaws and Combination 2/3 Jaws, .

    Two Jaws—Bar Control

    Two Jaws and Combination 2/3 Jaws

    Image of Product. 4 Two Jaws and 2 Combination 2/3 Jaws. Front orientation. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets, Two Jaws and Combination 2/3 Jaws, 5 ton to 10 ton Capacity.

    4 Two Jaws and 2 Combination 2/3 Jaws

    Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
    Combination 2/3 Jaw—Pullers with combination 2/3 jaws have mounting holes in both a 2-jaw and 3-jaw configuration, so you can attach the jaws either way to suit your application.
    Two Jaw—Two-jaw pullers have a slimmer profile than pullers with more jaws, so they fit in tighter spaces.
    Bar Control—Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
    Wt. Cap.,
    ton
    Puller
    Material
    Forcing Screw
    Material
    Includes
    Each
    Two Jaws—Bar Control
    5SteelSteelCrossbar
    Forcing Screw (7/8"-9" Thread Size, 8" Long)
    Four Sets of Jaws (5", 6", 6" Tapered Tip, and 8" Reach)
    Two Jaw-Mounting Screws    		000000000000000
     
    Two Jaws and Combination 2/3 Jaws
    Not RatedSteel—Slide Hammer Puller with Grip Handle
    Clamping Cone
    Puller Hook
    2-Jaw Jaw Bar
    4 Sets of 2/3 Reversible-Jaw External/Internal Jaws (For 1"-8" ID, For 1/4"-6 3/4" OD, 4 3/4"-6 1/2" Reach)    		0000000000000
    5 to 10Steel—2-Reversible-Jaw External/Internal Grip Puller —5-ton Capacity (For 5/8"-6" OD)
    2/3-Jaw External Grip Puller—10-ton Capacity (For Up To 16" OD, 11" Reach)
    2-Reversible-Jaw External/Internal Grip Puller —7-ton Capacity (For 1/2"-8 5/8" OD)
    Internal Extractor (for 1/2"-1-7/8" ID, 1-1/2" Reach)
    Six Cap Screws (3 of each: 3/8"-24 × 3" Lg., 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller
    2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/4"-6 3/4" ID, For 1/4"-6" OD, 4-3/4" Reach) with Slide Hammer
    Adjustable Face-Grip Puller (For 3 1/4"-9 5/8" OD) with 6 3/4” Long Forcing Screw
    Adjustable Face-Grip Puller (For 3/4"-4 1/4" OD) with 4 1/4” Long Forcing Screw
    Bearing Separator (1/4"-1 3/4 Spread)
    Bearing Separator (3/4"-4 1/4" Spread)    		000000000000000
     
    Accessories and Replacements for Gear and Bearing Pullers
    Straight-Tip Jaw for 6337K1 (25 tons; 6" Reach)0000000 Pair 0000000
    Straight-Tip Jaw for 6337K1 (25 tons; 10" Reach)0000000 Pair 000000
    Replacement Crossbars for 6337K1 (5 tons; Includes: Forcing Screw)0000000 Each 000000
    Replacement Straight-Tip Jaw for 6337K1 (5 tons; 5" Reach)0000000 Pair 000000
    Replacement Straight-Tip Jaw for 6337K1 (5 tons; 6" Reach)0000000 Pair 000000
    Replacement Straight-Tip Jaw for 6337K1 (5 tons; 8" Reach)0000000 Pair 000000
    Replacement Tapered-Tip Jaw for 6337K1 (5 tons; 6" Reach)0000000 Pair 000000

    External-Jaw Hub and Fan Blade Grip Pullers

    A must-have for HVAC jobs, this puller makes quick work of removing press-fit hubs and fan blades from motor shafts.
    For hub-mounted components such as blower wheels, secure the puller with the included set screws. For fan blades, attach the puller with the removable jaws, hooking a jaw around each fan blade to secure.
    4 Jaws with Tips on One End
    Image of Product. With Removable Jaws Attached. Front orientation. Hub and Fan Blade Grip Pullers. External-Jaw Hub and Fan Blade Grip Pullers.

    With Removable Jaws

    Attached

    Jaw
    Tip
    Forcing
    Screw
    For OD
    For Shaft
    OD
    For Hub
    OD
    Reach
    Lg.
    Puller
    Material
    Jaw
    Material
    Forcing Screw
    Material
    Wd.
    Thk.
    Overall
    Lg.
    Thread
    Size
    Each
    3" to 6"0.625"1 3/4"1 1/2"Aluminum
    		SteelSteel1/4"1/4"9"1/2"-20
    		00000000000000
    Accessories for Hub and Fan Blade Grip Pullers
    Long Jaw Set (For 3"-8 ½" OD; 2 ⅝" Reach)—Long Jaw Set (sold separately) is for gripping larger components.
    Hub Adapter (For 2 ¾" Hub OD)—Hub Adapter (sold separately) is for gripping larger components.
    Each
    Long Jaw Set (For 3"-8 ½" OD; 2 ⅝" Reach)0000000000000
    Hub Adapter (For 2 ¾" Hub OD)0000000000000

    Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers

    Grip objects on the outside or inside to tackle both types of pulling jobs. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out. Use the slide hammer to extract hard-to-remove objects.
    Combination 2/3 Jaws with Tips on One End
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Combination 2/3 Jaws with Tips on One End.
    Puller has combination 2/3 jaws—it comes with a jaw bar so you can change between 2-jaw and 3-jaw configurations to suit your application.
    For ID
    For OD
    Reach Lg.
    Wt. Cap.
    Puller
    Material
    T-Handle
    Material
    Includes
    Each
    1 1/4" to 4 1/4"1" to 4 1/2"1 1/4", 3"Not RatedSteelSteelT-Handle0000000000000
     
    Accessories and Replacements for Gear and Bearing Pullers
    Crossbar (For 1 ⅞"-5 ⅝" ID; For 1 ⅞"-5 ⅝" OD; For 0.375" Dia. Cap Screw)—Crossbar allows you to pull objects that have tapped holes. Thread the center hole onto the slide hammer; requires two 3/8" dia. cap screws (not included).
    Replacement Jaw Bar (⅝"-18 Thread Size)—Replacement jaw bar converts the 3-jaw puller to a 2-jaw puller.
    Each
    Crossbar (For 1 ⅞"-5 ⅝" ID; For 1 ⅞"-5 ⅝" OD; For 0.375" Dia. Cap Screw)000000000000
    Internal Jaw (For ¾"-2 ½" ID; 2 ⅜" Reach)000000000000
    External/Internal Jaw (For 1 ¼"-3 ½" ID; For 1"-4 ½" OD; 3 ¾" Reach)000000000000
    External/Internal Jaw (For 1 ½"-4 ½" ID; For ¾"-5" OD; 4 ⅛" Reach)000000000000
    External/Internal Jaw (For 2 ¾"-5 ½" ID; For ¾"-7 ½" OD; 6 ½" Reach)000000000000
    Puller Hook (For ⅝" Minimum ID)00000000000
    2.5-lb. Slide Hammer (⅝"-18 Thread Size)00000000000
    5-lb. Slide Hammer (⅝"-18 Thread Size)00000000000
    Replacement Jaw Bar (⅝"-18 Thread Size)00000000000
    Replacement Adjusting Cone0000000000000

    External-Jaw Hub and Fan Blade Grip Puller Sets

    Image of Product. Front orientation. Hub and Fan Blade Grip Pullers. External-Jaw Hub and Fan Blade Grip Puller Sets.
    Remove press-fit hubs and fan blades in a variety of sizes. Set includes a hub adapter and long jaws so you can grip larger components.
    For hub-mounted components such as blower wheels, secure the puller with the included set screws. For fan blades, attach the puller with the removable jaws, hooking a jaw around each fan blade to secure.
    Puller
    Material
    Jaw
    Material
    Forcing Screw
    Material
    Includes
    Each
    Aluminum
    		SteelSteel4-Jaw Puller (For 3"-6" OD, 1 1/2" Reach, 1/4" Width × 1" Long Tip)
    Forcing Screw (1/2"-20 Thread Size, 9" Long)
    Four Long Jaws (For 3"-8 1/2" OD, 2 5/8" Reach)
    Hub Adapter (For 2 3/4" OD)
    Three Set Screws
    Plastic case    		00000000000000
    back to top