McMaster-Carr logo
    Filter by
    Frequency
    Power Source
    Overall Height
    Blade Material
    Overall Width
    Attribute Image
    Electrical Phase
    Frame Material
    Bearing Type
    Thermostat Included
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    64 Products

    DC Equipment-Cooling Fans

    Running on 48V DC power or lower, these compact fans fit inside electronics and other small, heat-sensitive equipment to keep things cool. They're also known as muffin fans. Some meet American and Canadian safety standards.
    Round
    Image of Product. Front orientation. Fans. DC Equipment-Cooling Fans, Round.
    Quick-Disconnect Terminal Connection—Fans with quick-disconnect (QD) terminals are compatible with quick-disconnect power cords.
    Ball Bearing—Fans with ball bearings generate less heat as they run, so they have a longer life than fans with plain bearings.
    Overall
    Mounting
    Airflow
    Temp. Range,
    ° F
    Volume
    Current
    Dia.
    Dp.
    Frame
    Material
    Blade
    Material
    Bearing
    Type
    Fasteners
    Included
    Hole Dia.
    Certification
    Each
    12V DC—Wire Leads
    181 ft³/min-10 to 16053 dBA1.00 amp5.91" (150 mm)1.5" (38 mm)AluminumAluminumBall
    		No0.17" (4.3 mm)CSA Certified, UL Recognized Component
    		00000000000000
    210 ft³/min-10 to 16053 dBA1.00 amp5.91" (150 mm)2.17" (55 mm)AluminumPlasticBall
    		No0.17" (4.3 mm)CSA Certified, UL Recognized Component
    		0000000000000
     
    12V DC—Quick-Disconnect Terminal with Male Plug
    205 ft³/min0 to 16049 dBA1.00 amp6.77" (172 mm)2" (50.8 mm)AluminumPlasticBall
    		No0.17" (4.3 mm)CSA Certified, UL Recognized Component
    		00000000000000
     
    24V DC—Wire Leads
    181 ft³/min-10 to 16053 dBA0.50 amp5.91" (150 mm)1.5" (38 mm)AluminumAluminumBall
    		No0.17" (4.3 mm)CSA Certified, UL Recognized Component
    		0000000000000
    210 ft³/min-10 to 16053 dBA0.50 amp5.91" (150 mm)2.17" (55 mm)AluminumPlasticBall
    		No0.17" (4.3 mm)CSA Certified, UL Recognized Component
    		0000000000000
    212 ft³/min-10 to 16058 dBA0.79 amp5.91" (150 mm)1.5" (38 mm)AluminumAluminumBall
    		No0.17" (4.3 mm)CSA Certified, UL Recognized Component
    		0000000000000
    230 ft³/min0 to 16551 dBA0.54 amp6.77" (172 mm)2" (50.8 mm)AluminumPlasticBall
    		No0.17" (4.3 mm)CSA Certified, UL Recognized Component
    		00000000000000
    275 ft³/min0 to 15556 dBA0.96 amp6.77" (172 mm)2" (50.8 mm)AluminumPlasticBall
    		No0.17" (4.3 mm)CSA Certified, UL Recognized Component
    		00000000000000
    585 ft³/min-10 to 14068 dBA3.88 amp7.87" (200 mm)2.76" (70 mm)AluminumPlasticBall
    		No0.17" (4.3 mm)CSA Certified, UL Recognized Component
    		0000000000000
     

    DC Enclosure-Cooling Fans

    Operate these fans with a DC power source. They protect equipment in enclosures and cabinets from heat. All of these fans are reversible to exhaust hot air out or draw cooler outside air in.
    Round
    Image of Product. Front orientation. Fans. DC Enclosure-Cooling Fans.
    Blade
    Mounting
    Airflow
    Volume
    Motor Speed,
    rpm
    Current
    Overall
    Diameter
    Material
    Rotation
    Guard
    Material
    Fasteners
    Included
    Hole
    Dia.
    Each
    12V DC—Wire Leads
    950 ft³/minNot Rated2,7007.9 amp12"PlasticReversiblePlasticNo1/4"00000000000000
    1,100 ft³/minNot Rated2,3007.7 amp14 3/8"PlasticReversiblePlasticNo1/4"0000000000000
    1,500 ft³/minNot Rated2,20010.1 amp15 9/16"PlasticReversiblePlasticNo1/4"0000000000000
    2,100 ft³/minNot Rated2,70018.0 amp17 7/16"PlasticReversiblePlasticNo1/4"0000000000000
     

    Equipment-Cooling Fans

    Also known as muffin fans, these keep heat-sensitive equipment such as electronic components cool. All have UL recognized components and are CSA certified.
    Round
    Image of Product. Front orientation. Fans. Equipment-Cooling Fans, Round.
    Quick-Disconnect Terminal Connection—Fans with quick-disconnect (QD) terminals are compatible with quick-disconnect (QD) power cords.
    Ball Bearing—Ball bearings reduce heat generated during operation, which extends the life of the fan.
    Overall
    Mounting
    Airflow
    Temp. Range,
    ° F
    Volume
    Current
    Dia.
    Dp.
    Frame
    Material
    Blade
    Material
    Bearing
    Type
    Fasteners
    Included
    Hole Dia.
    Certification
    Each
    120V AC, Single Phase, 50Hz/60Hz—Wire Leads
    225 ft³/min-10 to 12062 dBA0.40 amp5.906" (150 mm)2.170" (55.12 mm)AluminumSteelBall
    		No0.169" (4.3 mm)CSA Certified, UL Recognized Component
    		00000000000000
     
    120V AC, Single Phase, 50Hz/60Hz—Quick-Disconnect Terminal
    190 ft³/min-10 to 12053 dBA0.33 amp5.906" (150 mm)2.170" (55.12 mm)AluminumSteelBall
    		No0.169" (4.3 mm)CSA Certified, UL Recognized Component
    		0000000000000
    294.2 ft³/min-10 to 14058 dBA0.25 amp6.772" (172 mm)2.000" (50.8 mm)AluminumSteelBall
    		No0.181" (4.6 mm)CSA Certified, UL Recognized Component
    		0000000000000
    600 ft³/min0 to 15549 dBA0.22 amp10.000" (254 mm)3.5" (88.9 mm)AluminumPlasticBall
    		No0.177" (4.5 mm)CSA Certified, UL Recognized Component
    		000000000000
     
    230V AC, Single Phase, 50Hz/60Hz—Wire Leads
    230 ft³/min-10 to 12062 dBA0.20 amp5.906" (150 mm)2.170" (55.12 mm)AluminumSteelBall
    		No0.169" (4.3 mm)CSA Certified, UL Recognized Component
    		0000000000000
     
    230V AC, Single Phase, 50Hz/60Hz—Quick-Disconnect Terminal
    200 ft³/min-10 to 12053 dBA0.17 amp5.906" (150 mm)2.170" (55.12 mm)AluminumSteelBall
    		No0.169" (4.3 mm)CSA Certified, UL Recognized Component
    		0000000000000
    294.2 ft³/min-10 to 14058 dBA0.13 amp6.772" (172 mm)2.000" (50.8 mm)AluminumSteelBall
    		No0.181" (4.6 mm)CSA Certified, UL Recognized Component
    		0000000000000
    600 ft³/min0 to 15549 dBA0.14 amp10.000" (254 mm)3.5" (88.9 mm)AluminumPlasticBall
    		No0.177" (4.5 mm)CSA Certified, UL Recognized Component
    		0000000000000
     

    High-Output Equipment-Cooling Fans

    These fans produce greater airflow than standard equipment-cooling fans. Also known as muffin fans and electrically commutated (EC) fans, they keep heat-sensitive equipment such as electronic components cool. Ball bearings keep them running smoothly and quietly, reducing friction to increase their lifespan. All have UL recognized components and some are CSA certified.
    Round
    Image of Product. Front orientation. Fans. High-Output Equipment-Cooling Fans, Round.
    Overall
    Mounting
    Airflow
    Temp. Range,
    ° F
    Volume
    Current
    Dia.
    Dp.
    Frame
    Material
    Blade
    Material
    Fasteners
    Included
    Hole Dia.
    Enclosure
    Rating
    Certification
    Each
    85V AC to 265V AC, Single Phase, 50Hz/60Hz—Wire Leads
    205 ft³/min0 to 16050 dBA0.12 amp6.772" (172 mm)3.280" (83.3 mm)AluminumPlasticNo0.169" (4.3 mm)—CSA Certified, UL Recognized Component
    		00000000000000
     
    95V AC to 260V AC, Single Phase, 50Hz/60Hz—Wire Leads
    500 ft³/min0 to 15556 dB0.23 amp10.000" (254 mm)3.504" (89 mm)AluminumPlasticNo0.181" (4.6 mm)—C-UL Recognized Component, CE Marked, UL Recognized Component
    		0000000000000
     
    120V AC, Single Phase, 50Hz/60Hz—Wire Leads
    290 ft³/min
    460 ft³/min    		-10 to 14044 dBA
    55 dBA    		0.1 amp
    0.4 amp    		9.843" (250 mm)3.091" (78.5 mm)PlasticSteelNo0.169" (4.3 mm)IP55
    		C-UL Recognized Component, CE Marked, UL Recognized Component
    		0000000000000
    830 ft³/min0 to 15570 dB1.05 amp10.000" (254 mm)3.504" (89 mm)AluminumPlasticNo0.181" (4.6 mm)—C-UL Recognized Component, CE Marked, UL Recognized Component
    		0000000000000
     
    230V AC, Single Phase, 50Hz/60Hz—Wire Leads
    290 ft³/min
    470 ft³/min    		-10 to 14044 dBA
    55 dBA    		0.1 amp
    0.2 amp    		9.843" (250 mm)3.091" (78.5 mm)PlasticSteelNo0.169" (4.3 mm)IP55
    		C-UL Recognized Component, CE Marked, UL Recognized Component
    		000000000000
    830 ft³/min0 to 15570 dB0.64 amp10.000" (254 mm)3.504" (89 mm)AluminumPlasticNo0.181" (4.6 mm)—C-UL Recognized Component, CE Marked, UL Recognized Component
    		0000000000000
     

    Wet-Location Equipment-Cooling Fans

    Able to withstand dust and water splashes, these fans are IP rated. Also known as muffin fans, they keep heat-sensitive equipment such as electronic components cool. All have ball bearings to lower the heat that is generated from the fans for a longer service life. They also have UL recognized components.
    Round
    Image of Product. Front orientation. Fans. Wet-Location Equipment-Cooling Fans, Round.
    Quick-Disconnect Terminal Connection—Use fans with quick-disconnect terminals to quickly connect and disconnect wiring from the terminal. Quick-disconnect power cords allow you to add a NEMA plug to these fans, so you can connect them to a standard outlet.
    Wire Lead Connection—Install fans with wire leads directly to your power source—there’s no need for additional connectors.
    IP55 Enclosure Rating—IP55-rated fans can also stand up to washdowns from low-pressure jets of water.
    Overall
    Mounting
    Airflow
    Temp. Range,
    ° F
    Volume
    Current
    Dia.
    Dp.
    Frame
    Material
    Blade
    Material
    Bearing
    Type
    Fasteners
    Included
    Hole Dia.
    Enclosure
    Rating
    Certification
    Each
    85V AC to 265V AC, Single Phase, 50Hz/60Hz—Wire Leads
    205 ft³/min0 to 16050 dBA0.14 amp6.772" (172 mm)2.000" (50.8 mm)AluminumPlasticBall
    		No0.170" (4.32 mm)IP54
    		CCC Marked, CE Marked, CSA Certified, UL Recognized Component
    		00000000000000
     
    100V AC to 120V AC, Single Phase, 50Hz/60Hz—Wire Leads
    183 ft³/min
    210 ft³/min    		-20 to 17558.1 dBA0.40 amp
    0.36 amp    		6.772" (172 mm)2.165" (55 mm)AluminumSteelBall
    		No0.177" (4.5 mm)IP55
    		C-UL Recognized Component, TUV Rheinland Certified, UL Recognized Component, VDE Certified
    		000000000000
    190 ft³/min
    215 ft³/min    		-20 to 17559 dBA0.40 amp
    0.36 amp    		6.772" (172 mm)2.008" (51 mm)AluminumSteelBall
    		No0.177" (4.5 mm)IP55
    		C-UL Recognized Component, TUV Rheinland Certified, UL Recognized Component, VDE Certified
    		000000000000
     
    100V AC to 120V AC, Single Phase, 50Hz/60 Hz—Quick-Disconnect Terminal
    190 ft³/min
    215 ft³/min    		-20 to 17559 dBA0.40 amp
    0.36 amp    		6.772" (172 mm)2.008" (51 mm)AluminumSteelBall
    		No0.177" (4.5 mm)IP55
    		C-UL Recognized Component, TUV Rheinland Certified, UL Recognized Component, VDE Certified
    		000000000000
     
    105V AC to 125V AC, Single Phase, 60 Hz—Quick-Disconnect Terminal
    550 ft³/min-40 to 15555 dBA0.29 amp10.000" (254 mm)3.504" (89 mm)AluminumPlasticBall
    		No0.181" (4.6 mm)IP55
    		CE Marked, TUV Rheinland Certified, UL Recognized Component
    		0000000000000
     
    200V AC to 240V AC, Single Phase, 50Hz/60Hz—Wire Leads
    183 ft³/min
    210 ft³/min    		-20 to 17558.1 dBA0.20 amp
    0.18 amp    		6.772" (172 mm)2.165" (55 mm)AluminumSteelBall
    		No0.177" (4.5 mm)IP55
    		C-UL Recognized Component, TUV Rheinland Certified, UL Recognized Component, VDE Certified
    		000000000000
    190 ft³/min
    215 ft³/min    		-20 to 17559 dBA0.20 amp
    0.18 amp    		6.772" (172 mm)2.008" (51 mm)AluminumSteelBall
    		No0.177" (4.5 mm)IP55
    		C-UL Recognized Component, TUV Rheinland Certified, UL Recognized Component, VDE Certified
    		000000000000
     
    210V AC to 250V AC, Single Phase, 60 Hz—Quick-Disconnect Terminal
    550 ft³/min-40 to 15555 dBA0.14 amp10.000" (254 mm)3.504" (89 mm)AluminumPlasticBall
    		No0.181" (4.6 mm)IP55
    		CE Marked, TUV Rheinland Certified, UL Recognized Component
    		000000000000
     

    Edge-Flow Equipment-Cooling Blowers

    For use in tight spaces where other equipment-cooling blowers won't fit, air enters through the center of these blowers and then expels along the edges. They create a more concentrated stream of air than equipment-cooling fans to blow away the heat generated by electronic equipment, induction heaters, and high-wattage bulbs. Use them to keep heat-sensitive equipment such as electronic components cool.
    Round
    Image of Product. Front orientation. Blowers. Edge-Flow Equipment-Cooling Blowers, Round.
    Round blowers are also known as motorized impellers.
    Overall,
    mm
    Dia.
    Dp.
    Temp. Range,
    ° F
    Airflow,
    ft³/min
    Volume (Sound),
    dBA
    Motor Speed,
    rpm
    Current,
    amp
    Each
    115V AC, Single, 50 Hz, 60 Hz—Wire Leads
    22073-13 to 140530742,1500.88000000000000000
     
    120V AC, Single Phase, 50 Hz/60 Hz—Wire Leads
    19068.5-10 to 145305602,4500.700000000000000
     
    120V AC, Single Phase, 60 Hz—Wire Leads
    13391.44-10 to 100200663,2500.300000000000000
     
    230V AC, Single, 50 Hz, 60 Hz—Wire Leads
    22073-13 to 140525692,1000.4900000000000000
     

    Equipment-Cooling Fan Kits

    Kits include a fan, guard, and power cord. They keep heat-sensitive equipment such as electronic components cool.
    Round
    Image of Product. Steel or Stainless Steel Guard. Front orientation. Fans. Equipment-Cooling Fan Kits, Round.

    Steel or Stainless Steel

    Guard

    Overall
    Mounting
    Dia.
    Dp.
    Airflow,
    ft³/min
    Temp. Range,
    ° F
    Volume (Sound),
    dBA
    Current,
    amp
    Frame
    Material
    Fasteners
    Included
    Hole Dia.
    Each
    With Steel Guard, Fan, and Power Cord
     
    120V AC, Single Phase, 50 Hz, 60 Hz—Two Blade Plug
    10.000"3.504" (89 mm)6000 to 155490.24AluminumNo0.157" (4 mm)0000000000000
     
    230V AC, Single Phase, 50 Hz, 60 Hz—Three Blade Plug
    10.000"3.504" (89 mm)6000 to 155490.14AluminumNo0.157" (4 mm)0000000000000
     
    With Steel Guard, Fan, On/Off Switch, and Power Cord
     
    120V AC, Single Phase, 50 Hz, 60 Hz—Two Blade Plug
    10.000"3.504" (89 mm)6000 to 155490.24AluminumNo0.157" (4 mm)0000000000000
     
    With 304 Stainless Steel Guard, Fan, Power Cord
     
    120V AC, Single Phase, 50 Hz, 60 Hz—Two Blade Plug
    10.000"3.504" (89 mm)6000 to 155490.24AluminumNo0.157" (4 mm)0000000000000
     
    230V AC, Single Phase, 50 Hz, 60 Hz—Three Blade Plug
    10.000"3.504" (89 mm)6000 to 155490.14AluminumNo0.157" (4 mm)0000000000000
     

    Equipment-Cooling Fan Kits with Thermostat

    Thermostat allows the fans in these kits to switch on only when needed. All kits include a fan, guard, and power cord. They keep heat-sensitive equipment such as electronic components cool.
    Round
    Image of Product. Steel Guard. Front orientation. Fans. Equipment-Cooling Fan Kits with Thermostat, Round, Steel Guard, Fan.

    Steel Guard

    Overall
    Mounting
    Dia.
    Dp.
    Airflow,
    ft³/min
    Temp. Range,
    ° F
    Volume (Sound),
    dBA
    Current,
    amp
    Frame
    Material
    Thermostat Temp.
    Measurement Range, ° F
    Fasteners
    Included
    Hole Dia.
    Each
    With Steel Guard, Fan, and Power Cord
     
    120V AC, Single Phase, 50 Hz, 60 Hz—Two Blade Plug
    10.000" (254 mm)3.504" (89 mm)6000 to 155490.24Aluminum75 to 86No0.157" (4 mm)00000000000000
     

    High-Temperature Equipment-Cooling Fans

    While standard equipment-cooling fan motors degrade when used in high-temperature areas, these fans run continuously without issue in temperatures up to 190° F. They are made entirely of metal and are lubricated with high-temperature bearing grease. This means they are often used to cool electronics near higher temperature areas, such as near commercial ovens. These fans have ball bearings that reduce friction as they run, extending their life. Their bearings also decrease noise for quiet operation.
    Round
    Image of Product. Front orientation. Fans. High-Temperature Equipment-Cooling Fans, Round.
    Overall
    Mounting
    Airflow
    Temp. Range,
    ° F
    Volume
    Current
    Dia.
    Dp.
    Frame
    Material
    Blade
    Material
    Bearing
    Type
    Fasteners
    Included
    Hole
    Dia.
    Certification
    Each
    115V AC, Single Phase, 60 Hz—Wire Leads
    230 ft³/min-40 to 19053 dBA0.47 amp150 mm55 mmAluminumSteelBall
    		No4.3 mmC-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component
    		0000000000000
     
    115V AC, Single Phase, 60 Hz—Quick-Disconnect Terminal
    230 ft³/min-40 to 19053 dBA0.47 amp150 mm55 mmAluminumSteelBall
    		No4.2 mmC-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component
    		000000000000
     
    230V AC, Single Phase, 60 Hz—Wire Leads
    230 ft³/min-40 to 19053 dBA0.23 amp150 mm55 mmAluminumSteelBall
    		No4.3 mmC-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component
    		000000000000
     
    230V AC, Single Phase, 60 Hz—Quick-Disconnect Terminal
    230 ft³/min-40 to 19053 dBA0.23 amp150 mm55 mmAluminumSteelBall
    		No4.2 mmC-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component
    		000000000000
     

    High-Pressure Washdown Equipment-Cooling Fans

    Cool down electronics in areas that require frequent and intense sanitizing. Rated IP69K, these AC-powered fans withstand harsh jets of water and block dust from reaching their motor. All have ball bearings that reduce friction and heat from operation, extending their life. Also known as muffin fans.
    Round
    Image of Product. Front orientation. Fans. High-Pressure Washdown Equipment-Cooling Fans, Round.
    Overall,
    mm
    Mounting
    Dia.
    Dp.
    Airflow,
    ft³/min
    Volume (Sound),
    dBA
    Current,
    amp
    Fasteners
    Included
    Hole Dia.,
    mm
    Enclosure
    Rating
    Certification
    Each
    Aluminum Frame with Steel Blades
     
    115V AC, Single Phase, 60 Hz—Wire Leads
    254891,000700.87No4.3IP69K
    		CE Marked, UL Recognized Component
    		00000000000000
     
    230V AC, Single Phase, 60 Hz—Wire Leads
    254891,000700.46No4.3IP69K
    		CE Marked, UL Recognized Component
    		0000000000000
     

    Enclosure-Cooling Blowers

    Image of Product. Front orientation. Blowers. Enclosure-Cooling Blowers, Round, 60 ft³/min Airflow.
    Image of Product. Front orientation. Blowers. Enclosure-Cooling Blowers, Round, 155 ft³/min Airflow.

    Round

    60 ft³/min Airflow

    Round

    155 ft³/min Airflow

    Create a more concentrated stream of air than enclosure-cooling fans to cool equipment faster. To save space inside enclosures, these blowers can mount outside. They draw cooler outside air into your enclosure or exhaust hot air through a louvered outlet vent. Incoming air is filtered to keep out dust and contaminants.
    60 ft³/min Airflow—60 cfm blowers have an open dripproof motor enclosure for relatively clean, dry, indoor locations.
    155 ft³/min Airflow—155 cfm blowers have a totally enclosed motor enclosure for use in dirty, dusty, and wet environments.
    Replacement Filters—Replacement filters are sold separately.
    Blowers
    Replacement
    Prefilters
    Replacement
    Filters
    Overall
    Outlet
    Ht.
    Wd.
    Dp.
    Dia.
    Ht.
    Wd.
    Airflow,
    ft³/min
    Volume (Sound),
    dBA
    Motor Speed,
    rpm
    Current,
    amp
    Each
    Each
    Each
    Round
     
    120V AC, Single Phase, 60 Hz—Wire Leads
    10 1/2"6 1/2"6 1/2"4"——60—3,2000.50000000000000000000000000000000000000000
    11 1/4"7 3/4"7"—4 3/8"3 7/8"155702,3500.700000000000000000000000000000000000000
     

    Wet-Location Equipment-Cooling Fan Kits

    Cool heat-sensitive electronics without having to hardwire your fan—these kits include the fan, guard, and power cord. They’re IP-rated to withstand dust, light rinses, and other wet environments. The guard prevents accidental contact with fan blades, which helps avoid injury. All have ball bearings to reduce the heat that’s generated from the fans for a longer service life.
    Round
    Image of Product. 304 Stainless Steel Guard. Front orientation. Fans. Wet-Location Equipment-Cooling Fan Kits, Round.

    304 Stainless Steel Guard

    Overall
    Mounting
    Dia.
    Dp.
    Airflow,
    ft³/min
    Temp. Range,
    ° F
    Volume (Sound),
    dBA
    Current,
    amp
    Frame
    Material
    Blade
    Material
    Fasteners
    Included
    Hole Dia.
    Enclosure
    Rating
    Certification
    Each
    With 304 Stainless Steel Guard, Fan, Power Cord
     
    115V AC, Single Phase, 50 Hz, 60 Hz—Two Blade Plug
    10.000" (254 mm)3.504" (89 mm)5500 to 155500.66AluminumPlasticNo0.157" (4 mm)IP55
    		UL Listed
    		00000000000000
     

    Submersible Equipment-Cooling Fans

    Able to withstand submersion in up to 3 meters of water, these fans cool electronics in food processing areas and outdoors. Ball bearings keep them running smoothly and quietly, reducing friction to increase their lifespan. Also known as muffin fans.
    Round
    Image of Product. Front orientation. Fans. Submersible Equipment-Cooling Fans, Round.
    Overall,
    mm
    Dia.
    Dp.
    Airflow,
    ft³/min
    Temp. Range,
    ° F
    Volume (Sound),
    dBA
    Current,
    amp
    Mounting Fasteners
    Included
    Mounting Hole Dia. (No.
    of Mounting Holes)
    Enclosure
    Rating
    Certification
    Each
    120V AC, Single Phase, 50Hz/60Hz—Wire Leads
    22070485-20 to 17568.20.91No4.3 mm (16)IP68
    		C-UL Recognized Component, CE Marked, UL Recognized Component
    		00000000000000
    25489930-20 to 175670.91No4.3 mm (16)IP68
    		C-UL Recognized Component, CE Marked, UL Recognized Component
    		0000000000000
    254891,000-20 to 175700.91No4.3 mm (16)IP68
    		C-UL Recognized Component, CE Marked, UL Recognized Component
    		0000000000000
     
    230V AC, Single Phase, 50Hz/60Hz—Wire Leads
    22070485-20 to 17568.20.46No4.3 mm (16)IP68
    		C-UL Recognized Component, CE Marked, UL Recognized Component
    		0000000000000
    25489930-20 to 175670.46No4.3 mm (16)IP68
    		C-UL Recognized Component, CE Marked, UL Recognized Component
    		0000000000000
    254891,000-20 to 175700.46No4.3 mm (16)IP68
    		C-UL Recognized Component, CE Marked, UL Recognized Component
    		0000000000000
     
    back to top