Feeler Gauge Sets
Keep a variety of leaf thicknesses on hand to confirm gaps are within tolerance. These gauges are often used to check the clearance around bearings and other machine parts, making sure there’s enough space to avoid friction and prevent wear. The leaves are riveted together in a folding fan design, so they’re easy to carry. Each leaf is marked with thickness for quick reference.
Tapered leaves are often used for go/no-go checks. The end of each leaf is 0.002" thinner than its listed thickness. If the tip fits but the rest of the body doesn’t, your gap is within tolerance. Offset leaves are angled to access gaps that flat leaves can’t reach.
Steel and tool steel leaves are stronger, harder, and more wear resistant than stainless steel and brass leaves. Brass leaves have good corrosion resistance and are nonmarring to prevent scratches. They’re also nonmagnetic, so you can safely check spark plugs and other electronic ignitions without attracting debris. Stainless steel leaves are less likely to rust than steel and tool steel leaves.
Sets with both steel and brass leaves include 30 steel leaves and six brass leaves.
Sets with a leaf-securing lock hold individual leaves in place so they don’t move and disrupt measurements.
Leaf | Closed | |||||||
|---|---|---|---|---|---|---|---|---|
| No. of Leaves | Thick. | Lg. | Wd. | Lg. | Wd. | Features | Each | |
Flat Round Leaves | ||||||||
Steel | ||||||||
| 17 | 0.01", 0.012", 0.013", 0.015", 0.016", 0.017", 0.018", 0.019", 0.02", 0.022", 0.024", 0.025", 0.026", 0.028", 0.03", 0.032", 0.035" | 1 3/4" | 1/4" | 2 3/16" | 1/4" | __ | 00000000 | 00000 |
| 25 | 0.0015", 0.002" to 0.021" (0.001" increments), 0.025", 0.027", 0.03", 0.04" | 24" | 1/2" | 24 1/4" | 1/2" | Leaf-Securing Lock | 0000000 | 000000 |
| 25 | 0.04 mm, 0.05 mm, 0.06 mm, 0.07 mm, 0.08 mm, 0.09 mm, 0.10 to 1.0 mm (0.05 mm increments) | 12" | 1/2" | 12 1/4" | 1/2" | __ | 000000 | 000000 |
| 35 | 0.0015", 0.002" to 0.035" (0.001" increments) | 3" | 1/2" | 3 1/2" | 1/2" | Leaf-Securing Lock | 00000000 | 00000 |
Brass | ||||||||
| 6 | 0.006", 0.008", 0.01", 0.012", 0.014", 0.016" | 2 5/8" | 1/2" | 3" | 1/2" | __ | 00000000 | 0000 |
Steel and Brass | ||||||||
| 36 | Steel: 0.002", 0.0025", 0.003" to 0.026" (0.001" increments), 0.028", 0.03", 0.032", 0.035", Brass: 0.006", 0.008", 0.01", 0.012", 0.014", 0.016" | 3" | 1/2" | 3 7/16" | 1/2" | Leaf-Securing Lock | 00000000 | 00000 |
Tool Steel | ||||||||
| 8 | 0.002", 0.003", 0.004", 0.005", 0.006", 0.008", 0.01", 0.015" | 9" | 1/2" | 9 1/8" | 1/2" | Leaf-Securing Lock | 000000 | 00000 |
| 8 | 0.002", 0.003", 0.004", 0.005", 0.006", 0.008", 0.01", 0.015" | 12" | 1/2" | 12 3/8" | 1/2" | Leaf-Securing Lock | 000000 | 00000 |
| 9 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.012", 0.015" | 3" | 1/2" | 3 3/8" | 1/2" | Leaf-Securing Lock | 000000 | 0000 |
| 15 | 0.06 mm, 0.07 mm, 0.08 mm, 0.10 mm, 0.15 to 0.60 mm (0.05 mm increments), 0.70 mm | 3" | 1/2" | 3 1/4" | 1/2" | __ | 0000000 | 0000 |
| 16 | 0.002", 0.003", 0.004", 0.005", 0.006", 0.008", 0.011", 0.012", 0.013", 0.014", 0.016", 0.018", 0.02", 0.022", 0.025", 2.5" Long Ruler Blade Leaf | 3" | 1/2" | 3 3/8" | 1/2" | Leaf-Securing Lock | 0000000 | 0000 |
| 22 | 0.004" to 0.025" (0.001" increments) | 2 5/16" | 1/2" | 2 1/2" | 1/2" | Leaf-Securing Lock | 000000 | 00000 |
| 25 | 0.0015", 0.002" to 0.021" (0.001" increments), 0.025", 0.027", 0.03", 0.04" | 12" | 1/2" | 12 3/8" | 1/2" | Leaf-Securing Lock | 0000000 | 00000 |
| 25 | 0.04 mm, 0.05 mm, 0.06 mm, 0.07 mm, 0.08 mm, 0.09 mm, 0.10 to 1.0 mm (0.05 mm increments) | 3" | 1/2" | 3 3/8" | 1/2" | __ | 0000000 | 00000 |
| 26 | 0.0015", 0.002", 0.0025", 0.003" to 0.025" (0.001" increments) | 3" | 1/2" | 3 3/8" | 1/2" | Leaf-Securing Lock | 000000 | 00000 |
Stainless Steel | ||||||||
| 18 | 0.0015", 0.002", 0.0025", 0.003", 0.0035", 0.004" to 0.01" (0.001" increments), 0.012", 0.015", 0.016", 0.018", 0.02", 0.025" | 3" | 1/2" | 3 1/4" | 1/2" | Leaf-Securing Lock | 00000000 | 00000 |
| 25 | 0.0015", 0.002" to 0.025" (0.001" increments) | 12" | 1/2" | 12 3/8" | 1/2" | Leaf-Securing Lock | 0000000 | 000000 |
| 25 | 0.0015", 0.002" to 0.025" (0.001" increments) | 24" | 1/2" | 24 1/4" | 1/2" | Leaf-Securing Lock | 00000000 | 000000 |
Flat Tapered Leaves | ||||||||
Steel | ||||||||
| 22 | 0.004" to 0.027" (0.001" increments) | 3" | 1/2" | 3 7/16" | 1/2" | Leaf-Securing Lock | 00000000 | 00000 |
Offset Round Leaves | ||||||||
Steel | ||||||||
| 16 | 0.005" to 0.02" (0.001" increments) | 3 1/2" | 1/2" | 4" | 1/2" | __ | 00000000 | 0000 |
| 26 | 0.005" to 0.03" (0.001" increments) | 4" | 1/2" | 8 1/4" | 1/2" | Leaf-Securing Lock | 00000000 | 00000 |
Tool Steel | ||||||||
| 12 | 0.008", 0.01", 0.012", 0.013", 0.014", 0.015", 0.016", 0.018", 0.019", 0.02", 0.025", 0.026" | 4" | 1/2" | 4 1/4" | 1/2" | Leaf-Securing Lock | 0000000 | 00000 |
Starrett Feeler Gauge Sets
Check gaps, alignment, and narrow slots with these feeler gauge sets that include leaves in a variety of thicknesses riveted together in a fan design. Sets fold up for portability. Each leaf is marked with thickness. Leaf-securing locks hold individual gauge leaves in place.
Tool steel gauge sets are stronger, harder, and more wear resistant than stainless steel.
Stainless steel gauge sets are less likely to rust than tool steel.
Leaf | Closed | |||||||
|---|---|---|---|---|---|---|---|---|
| No. of Leaves | Thick. | Lg. | Wd. | Lg. | Wd. | Manufacturer Model No. | Each | |
Tool Steel | ||||||||
| 8 | 0.002", 0.003", 0.004", 0.005", 0.006", 0.008", 0.01", 0.015" | 12" | 1/2" | 12 7/16" | 1/2" | 172E | 000000 | 0000000 |
| 9 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.012", 0.015" | 3" | 1/2" | 3 7/16" | 1/2" | 172A | 000000 | 00000 |
| 13 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.02", 0.03", 0.04", 0.075", 0.1", 0.2" | 4 1/2" | 1/2" | 4 15/16" | 1/2" | 467 | 0000000 | 000000 |
| 13 | 0.04 mm, 0.03 mm, 0.05 mm, 0.06 mm, 0.07 mm, 0.08 mm, 0.09 mm, 0.10 mm, 0.15 mm, 0.20 mm, 0.30 mm, 0.40 mm, 0.50 mm | 3" | 1/2" | 3 7/16" | 1/2" | 173MA | 0000000 | 00000 |
| 13 | 0.04 mm, 0.05 mm, 0.06 mm, 0.07 mm, 0.08 mm, 0.10 mm, 0.15 mm, 0.20 mm, 0.30 mm, 1.0 mm, 2.0 mm, 3.0 mm, 5.0 mm | 4 1/2" | 1/2" | 4 15/16" | 1/2" | 467M | 0000000 | 000000 |
| 20 | 0.05 mm, 0.10 mm, 0.15 mm, 0.20 mm, 0.25 mm, 0.30 mm, 0.35 mm, 0.40 mm, 0.45 mm, 0.50 mm, 0.55 mm, 0.60 mm, 0.65 mm, 0.70 mm, 0.75 mm, 0.80 mm, 0.85 mm, 0.90 mm, 0.95 mm, 1.0 mm | 3" | 1/2" | 3 7/16" | 1/2" | 66MA | 0000000 | 00000 |
| 22 | 0.0015", 0.002", 0.0025", 0.003", 0.004", 0.005", 0.006", 0.008", 0.007", 0.009", 0.01", 0.012", 0.013", 0.014", 0.015", 0.016", 0.018", 0.02", 0.022", 0.025", 0.03", 0.035" | 3" | 1/2" | 3 7/16" | 1/2" | 572B | 0000000 | 00000 |
| 26 | 0.0015", 0.002", 0.0025", 0.003" to 0.025" (0.001" increments) | 3" | 1/2" | 3 7/16" | 1/2" | 66 | 000000 | 00000 |
| 31 | 0.0015", 0.002", 0.0025", 0.003" to 0.026" (0.001" increments), 0.028", 0.03", 0.032", 0.035" | 3" | 1/2" | 3 7/16" | 1/2" | 66B | 0000000 | 00000 |
301 Stainless Steel  | ||||||||
| 8 | 0.002", 0.003", 0.004", 0.005", 0.006", 0.008", 0.01", 0.015" | 12" | 1/2" | 12 7/16" | 1/2" | 172ES | 0000000 | 000000 |
| 9 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.012", 0.015" | 3" | 1/2" | 3 7/16" | 1/2" | 172AS | 0000000 | 00000 |
| 13 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.02", 0.03", 0.04", 0.075", 0.1", 0.2" | 4 1/2" | 1/2" | 4 15/16" | 1/2" | 467S | 0000000 | 000000 |
| 31 | 0.0015", 0.002", 0.0025", 0.003" to 0.026" (0.001" increments), 0.028", 0.03", 0.032", 0.035" | 3" | 1/2" | 3 7/16" | 1/2" | 66BS | 0000000 | 000000 |
Starrett Feeler Gauge Sets with Calibration Certificate
To ensure accurate readings, these sets come with a certificate of calibration traceable to NIST that states they’ve passed a test for accuracy. They are used to check gaps, alignment, and narrow slots. Gauge leaves are riveted together in a fan design that folds up for portability. Each leaf is marked with thickness. Leaf-securing locks hold individual gauge leaves in place.
Tool steel gauge sets are stronger, harder, and more wear resistant than stainless steel gauge sets.
Stainless steel gauge sets are less likely to rust than tool steel gauge sets.
Leaf | Closed | |||||||
|---|---|---|---|---|---|---|---|---|
| No. of Leaves | Thick. | Lg. | Wd. | Lg. | Wd. | Manufacturer Model No. | Each | |
Tool Steel | ||||||||
| 8 | 0.002", 0.003", 0.004", 0.005", 0.006", 0.008", 0.01", 0.015" | 12" | 1/2" | 12 7/16" | 1/2" | 172E | 00000000 | 0000000 |
| 9 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.012", 0.015" | 3" | 1/2" | 3 7/16" | 1/2" | 172A | 00000000 | 000000 |
| 13 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.02", 0.03", 0.04", 0.075", 0.1", 0.2" | 4 1/2" | 1/2" | 4 15/16" | 1/2" | 467 | 0000000 | 000000 |
| 13 | 0.03 mm, 0.04 mm, 0.05 mm, 0.06 mm, 0.07 mm, 0.08 mm, 0.09 mm, 0.10 mm, 0.15 mm, 0.20 mm, 0.30 mm, 0.40 mm, 0.50 mm | 3" | 1/2" | 3 7/16" | 1/2" | 173MA | 00000000 | 000000 |
| 13 | 0.04 mm, 0.05 mm, 0.06 mm, 0.07 mm, 0.08 mm, 0.10 mm, 0.15 mm, 0.20 mm, 0.30 mm, 1.0 mm, 2.0 mm, 3.0 mm, 5.0 mm | 4 1/2" | 1/2" | 4 15/16" | 1/2" | 467M | 00000000 | 000000 |
| 20 | 0.05 mm to 1.0 mm (0.05 mm increments) | 3" | 1/2" | 3 7/16" | 1/2" | 66MA | 00000000 | 000000 |
| 22 | 0.0015", 0.002", 0.0025", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.009", 0.01", 0.012", 0.013", 0.014", 0.015", 0.016", 0.018", 0.02", 0.022", 0.025", 0.03", 0.035" | 3" | 1/2" | 3 7/16" | 1/2" | 572B | 00000000 | 000000 |
| 26 | 0.0015", 0.002", 0.0025", 0.003" to 0.025" (0.001" increments) | 3" | 1/2" | 3 7/16" | 1/2" | 66 | 0000000 | 000000 |
| 31 | 0.0015", 0.002", 0.0025", 0.003" to 0.026" (0.001" increments), 0.028", 0.03", 0.032", 0.035" | 3" | 1/2" | 3 7/16" | 1/2" | 66B | 00000000 | 000000 |
301 Stainless Steel | ||||||||
| 8 | 0.002", 0.003", 0.004", 0.005", 0.006", 0.008", 0.01", 0.015" | 12" | 1/2" | 12 7/16" | 1/2" | 172ES | 00000000 | 000000 |
| 9 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.012", 0.015" | 3" | 1/2" | 3 7/16" | 1/2" | 172AS | 00000000 | 000000 |
| 13 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.02", 0.03", 0.04", 0.075", 0.1", 0.2" | 4 1/2" | 1/2" | 4 15/16" | 1/2" | 467S | 00000000 | 000000 |
| 31 | 0.0015", 0.002", 0.0025", 0.003" to 0.026" (0.001" increments), 0.028", 0.03", 0.032", 0.035" | 3" | 1/2" | 3 7/16" | 1/2" | 66BS | 00000000 | 000000 |
Color-Coded Feeler Gauge Sets
With leaves that are color coded based on thickness, you can read your measurements at a glance. These gauge sets are used to check gaps, alignment, and narrow slots. Gauge leaves are riveted together in a fan design to keep the set complete; the set folds up for portability. Sets are nonmagnetic, nonmarring, noncorrosive, nonsparking, and resistant to oil.
Leaf | |||||
|---|---|---|---|---|---|
| No. of Leaves | Thick. | Lg. | Wd. | Each | |
Plastic | |||||
| 5 | 0.025" (White), 0.030" (Orange), 0.040" (Clear), 0.050" (Clear), 0.060" (Clear) | 5" | 1/2" | 00000000 | 000000 |
| 5 | 0.025" (White), 0.030" (Orange), 0.040" (Clear), 0.050" (Clear), 0.060" (Clear) | 12" | 1/2" | 00000000 | 00000 |
| 7 | 0.0005 (Silver), 0.001" (Amber), 0.0015" (Purple), 0.002" (Red), 0.003" (Green), 0.004" (Tan), 0.005" (Blue) | 5" | 1/2" | 00000000 | 0000 |
| 7 | 0.0005 (Silver), 0.001" (Amber), 0.0015" (Purple), 0.002" (Red), 0.003" (Green), 0.004" (Tan), 0.005" (Blue) | 12" | 1/2" | 00000000 | 0000 |
| 8 | 0.001" (Amber), 0.002" (Red), 0.003" (Green), 0.004" (Tan), 0.005" (Blue), 0.010" (Brown), 0.020" (Yellow), 0.040" (Clear) | 5" | 1/2" | 00000000 | 00000 |
| 8 | 0.001" (Amber), 0.002" (Red), 0.003" (Green), 0.004" (Tan), 0.005" (Blue), 0.010" (Brown), 0.020" (Yellow), 0.040" (Clear) | 12" | 1/2" | 00000000 | 00000 |
| 13 | 0.001" (Amber), 0.0015" (Purple), 0.002" (Red), 0.003" (Green), 0.004" (Tan), 0.005" (Blue), 0.0075" (Cream), 0.010" (Brown), 0.0125" (Black), 0.015" (Pink), 0.020" (Yellow), 0.025" (White), 0.030" (Orange) | 5" | 1/2" | 00000000 | 00000 |
| 13 | 0.001" (Amber), 0.0015" (Purple), 0.002" (Red), 0.003" (Green), 0.004" (Tan), 0.005" (Blue), 0.0075" (Cream), 0.010" (Brown), 0.0125" (Black), 0.015" (Pink), 0.020" (Yellow), 0.025" (White), 0.030" (Orange) | 12" | 1/2" | 00000000 | 00000 |
| 14 | 0.0005 (Silver), 0.001" (Amber), 0.0015" (Purple), 0.002" (Red), 0.003" (Green), 0.004" (Tan), 0.005" (Blue), 0.0075" (Cream), 0.010" (Brown), 0.0125" (Black), 0.015" (Pink), 0.020" (Yellow), 0.025" (White), 0.030" (Orange) | 5" | 1/2" | 00000000 | 00000 |
| 14 | 0.0005 (Silver), 0.001" (Amber), 0.0015" (Purple), 0.002" (Red), 0.003" (Green), 0.004" (Tan), 0.005" (Blue), 0.0075" (Cream), 0.010" (Brown), 0.0125" (Black), 0.015" (Pink), 0.020" (Yellow), 0.025" (White), 0.030" (Orange) | 12" | 1/2" | 00000000 | 00000 |
| 16 | 0.001" (Amber), 0.0015" (Purple), 0.002" (Red), 0.003" (Green), 0.004" (Tan), 0.005" (Blue), 0.0075" (Cream), 0.010" (Brown), 0.0125" (Black), 0.015" (Pink), 0.020" (Yellow), 0.025" (White), 0.030" (Orange), 0.040" (Clear), 0.050" (Clear), 0.060" (Clear) | 5" | 1/2" | 00000000 | 00000 |
| 16 | 0.001" (Amber), 0.0015" (Purple), 0.002" (Red), 0.003" (Green), 0.004" (Tan), 0.005" (Blue), 0.0075" (Cream), 0.010" (Brown), 0.0125" (Black), 0.015" (Pink), 0.020" (Yellow), 0.025" (White), 0.030" (Orange), 0.040" (Clear), 0.050" (Clear), 0.060" (Clear) | 12" | 1/2" | 00000000 | 00000 |
Starrett Feeler Gauge Sets for Tight Spots
To measure thickness in areas where standard feeler gauges don’t fit, these sets have leaves with narrow ends. They're used to check gaps, alignment, and narrow slots. Sets include leaves in a variety of thicknesses that are riveted together in a fan design that folds up for portability. Each leaf is marked with thickness. Leaf-securing locks hold individual gauge leaves in place.
Tool steel gauges are stronger, harder, and more resistant to scratches and wear than stainless steel gauges.
Stainless steel gauges are less likely to rust than tool steel gauges.
Leaf | Closed | |||||||
|---|---|---|---|---|---|---|---|---|
| No. of Leaves | Thick. | Lg. | Wd. | Lg. | Wd. | Manufacturer Model No. | Each | |
Tool Steel | ||||||||
| 8 | 0.002", 0.003", 0.004", 0.006", 0.008", 0.012", 0.015", 0.01" | 6" | 1/2" | 6 7/16" | 1/2" | 172CT | 000000 | 000000 |
| 9 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.012", 0.015", 0.01" | 3" | 1/2" | 2 3/4" | 1/2" | 172AT | 000000 | 00000 |
| 13 | 0.03 mm, 0.04 mm, 0.05 mm, 0.06 mm, 0.07 mm, 0.08 mm, 0.09 mm, 0.10 mm, 0.15 mm, 0.20 mm, 0.30 mm, 0.40 mm, 0.50 mm | 3" | 1/2" | 3 7/16" | 1/2" | 173MAT | 0000000 | 00000 |
| 13 | 0.03 mm, 0.04 mm, 0.05 mm, 0.06 mm, 0.07 mm, 0.08 mm, 0.09 mm, 0.10 mm, 0.15 mm, 0.20 mm, 0.30 mm, 0.40 mm, 0.50 mm | 6" | 1/2" | 6 7/16" | 1/2" | 173MCT | 00000000 | 000000 |
| 26 | 0.0015", 0.002", 0.0025", 0.003" to 0.025" (0.001" increments) | 3" | 1/2" | 3 7/16" | 1/2" | 66T | 000000 | 00000 |
Stainless Steel | ||||||||
| 9 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.012", 0.015", 0.01" | 3" | 1/2" | 3 7/16" | 1/2" | 172ATS | 00000000 | 00000 |
| 26 | 0.0015", 0.002", 0.0025", 0.003" to 0.025" (0.001" increments) | 3" | 1/2" | 3 7/16" | 1/2" | 66TS | 00000000 | 000000 |
Feeler Gauge Sets for Tight Spots
Leaves have narrow ends to measure thickness where standard feeler gauges can’t fit. These sets are for checking gaps, alignment, and narrow slots. They include leaves in a variety of thicknesses riveted together in a fan design that folds up for portability. Each leaf is marked with thickness. Leaf-securing locks hold individual gauge leaves in place.
Starrett Feeler Gauge Sets for Tight Spots with Calibration Certificate
A certificate of calibration traceable to NIST states that these sets have passed a test for accuracy. They’re used to check small gaps, narrow slots, and alignment. The leaves have a narrow end to measure thickness in areas where standard feeler gauges don’t fit. For example, they can measure gaps when setting engine components such as spark plugs to make sure there’s enough space so friction doesn’t lead to inefficiency.
Sets include leaves in a variety of thicknesses that are riveted together in a fan design that folds up for portability. Each leaf is marked with thickness. Leaf-securing locks hold individual gauge leaves in place.
Tool steel gauge sets are stronger, harder, and more wear resistant than stainless steel gauge sets.
Stainless steel gauge sets are less likely to rust than tool steel gauge sets.
Leaf | Closed | |||||||
|---|---|---|---|---|---|---|---|---|
| No. of Leaves | Thick. | Lg. | Wd. | Lg. | Wd. | Manufacturer Model No. | Each | |
Tool Steel | ||||||||
| 8 | 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.012", 0.015" | 6" | 1/2" | 6 7/16" | 1/2" | 172CT | 00000000 | 0000000 |
| 9 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.012", 0.015" | 3" | 1/2" | 3 7/16" | 1/2" | 172AT | 00000000 | 000000 |
| 13 | 0.03 mm, 0.04 mm, 0.05 mm, 0.06 mm, 0.07 mm, 0.08 mm, 0.09 mm, 0.10 mm, 0.15 mm, 0.20 mm, 0.30 mm, 0.40 mm, 0.50 mm | 3" | 1/2" | 3 7/16" | 1/2" | 173MAT | 00000000 | 000000 |
| 13 | 0.03 mm, 0.04 mm, 0.05 mm, 0.06 mm, 0.07 mm, 0.08 mm, 0.09 mm, 0.10 mm, 0.15 mm, 0.20 mm, 0.30 mm, 0.40 mm, 0.50 mm | 6" | 1/2" | 6 7/16" | 1/2" | 173MCT | 00000000 | 000000 |
| 26 | 0.0015", 0.002", 0.0025", 0.003" to 0.025" (0.001" increments) | 3" | 1/2" | 3 7/16" | 1/2" | 66T | 0000000 | 000000 |
Stainless Steel | ||||||||
| 9 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.012", 0.015" | 3" | 1/2" | 3 7/16" | 1/2" | 172ATS | 00000000 | 000000 |
| 26 | 0.0015", 0.002", 0.0025", 0.003" to 0.025" (0.001" increments) | 3" | 1/2" | 3 7/16" | 1/2" | 66TS | 00000000 | 000000 |
Combination Wire, Width, and Thickness Feeler Gauge Sets
These sets combine a wire gauge, a tapered-width feeler gauge, and a set of feeler gauges for tight spots in one tool. The tapered-width gauge is designed for measuring hole and slot widths and diameters. The feeler gauge leaves check the thickness of slots, gaps, and alignment; each leaf is marked with thickness. Leaves are riveted together in a fan design that folds up for portability.
Tapered Gauge Thick. Measuring | Closed | |||||||
|---|---|---|---|---|---|---|---|---|
| Thick. | Range | Increments | Wire Gauge Size | Leaf Lg. | Lg. | Wd. | Each | |
Steel | ||||||||
| 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.012", 0.015", 0.0625" | 1/64" to 3/16" | 1/64" | 1/16", 1/8", 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36 | 4 1/2" | 4 15/16" | 1/2" | 00000000 | 0000000 |
| 0.04mm, 0.05mm, 0.06mm, 0.07mm, 0.08mm, 0.1mm, 0.15mm, 0.2mm, 0.3mm, 1mm, 2mm | 0.5mm to 5mm | 0.5mm | 1/16", 1/8", 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36 | 4 15/16" | 4 15/16" | 1/2" | 0000000 | 000000 |
Tapered-Width Feeler Gauge Sets
Check slot widths and hole diameters with the markings on these gauges. Leaves in a variety of sizes are riveted together in a fan design—spread them out for use or fold them in for portability. Each leaf narrows toward the tip to measure a range of sizes. Slide them into a hole until the gauge sits snug and then read the width measurement.
Steel gauges are stronger, harder, and more wear resistant than stainless steel gauges.
Stainless steel gauges are less likely to rust than steel gauges.
Closed | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. of Leaves | Wd. | Leaf Lg. | Lg. | Wd. | Manufacturer | Manufacturer Model No. | Each | |
Steel | ||||||||
| 4 | 1/16" to 1 1/16" (1/64" increments) | 5 7/32" | 5 1/4" | 1" | Starrett | 267 | 0000000 | 0000000 |
| 8 | 0.100" to 0.500" (0.001" increments) | 2 17/32" | 2 17/32" | 1/2" | Starrett | 269A | 0000000 | 000000 |
| 10 | 0.500" to 1.000" (0.001" increments) | 2 25/32" | 2 25/32" | 1" | Starrett | 269B | 0000000 | 000000 |
Stainless Steel | ||||||||
| 4 | 1 mm to 29 mm (.05 mm increments) | 5 1/4" | 5 1/4" | 1 1/8" | __ | __ | 0000000 | 00000 |
Feeler Gauge Assortments
Use these feeler gauge assortments to check gaps, alignment, and narrow slots. They have finished ends marked with thickness.
Steel gauge assortments are polished.
Brass gauge assortments have good corrosion resistance.
302/304 stainless steel gauge assortments are more corrosion resistant than brass and steel.
| No. of Pieces | Thick. | Lg. | Wd. | Container Type | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 20 | 0.001", 0.0015", 0.002" to 0.01" (0.001" increments), 0.012", 0.014", 0.015", 0.016", 0.018", 0.02", 0.022", 0.024", 0.025" | 6" | 1/2" | Pouch | 0000000 | 000000 |
| 32 | 0.001", 0.0015", 0.002", 0.0025", 0.003" to 0.03" (0.001" increments) | 12" | 1/2" | __ | 000000 | 00000 |
| 48 | 0.001", 0.0015", 0.002", 0.0025", 0.003" to 0.01" (0.001" increments), 0.015", 0.02", 0.025", 0.03" | 12" | 1/2" | __ | 000000 | 00000 |
Brass | ||||||
| 20 | 0.001", 0.0015", 0.002" to 0.01" (0.001" increments), 0.012", 0.014", 0.015", 0.016", 0.018", 0.02", 0.023", 0.025", 0.03" | 6" | 1/2" | Pouch | 0000000 | 00000 |
| 20 | 0.001", 0.0015", 0.002" to 0.01" (0.001" increments), 0.012", 0.014", 0.015", 0.016", 0.018", 0.02", 0.023", 0.025", 0.03" | 12" | 1/2" | __ | 0000000 | 00000 |
302/304 Stainless Steel | ||||||
| 20 | 0.0005", 0.001", 0.0015", 0.002", 0.0025", 0.003" to 0.01" (0.001" increments), 0.012", 0.015", 0.016", 0.018", 0.02", 0.025", 0.031" | 6" | 1/2" | Pouch | 0000000 | 00000 |
| 20 | 0.0005", 0.001", 0.0015", 0.002", 0.0025", 0.003" to 0.01" (0.001" increments), 0.012", 0.015", 0.016", 0.018", 0.02", 0.025", 0.031" | 12" | 1/2" | __ | 0000000 | 00000 |
Starrett Tapered-Thickness Feeler Gauges
Check a range of thicknesses with a single gauge that tapers in thickness. It’s used to check gaps, alignment, and narrow slots.
Thick. Measuring Range | Thick. Measuring Increments | |||||||
|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Lg. | Wd. | Manufacturer Model No. | Each | |
Steel | ||||||||
| 0.010" to 0.150" | 0.300mm to 4.000mm | 0.001" | 0.05mm | 6 1/4" | 7/16" | 270 | 0000000 | 0000000 |
Starrett Tapered-Thickness Feeler Gauges with Calibration Certificate
A certificate of calibration traceable to NIST states that this gauge has passed a test for accuracy. Often used to check gaps, alignment, and narrow slots, it tapers in thickness for checking a range of thicknesses.
Thick. Measuring Range | Thick. Measuring Increments | |||||||
|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Lg. | Wd. | Manufacturer Model No. | Each | |
Steel | ||||||||
| 0.010" to 0.150" | 0.300 mm to 4.000mm | 0.001" | 0.05mm | 6 1/4" | 7/16" | 270 | 0000000 | 0000000 |
Tapered-Thickness Feeler Gauges
Replace an entire feeler gauge set with one of these tapered gauges that let you check a range of thicknesses. They’re used to check gaps, alignment, and narrow slots.