Feeler Gauge Sets
Keep a variety of leaf thicknesses on hand to confirm gaps are within tolerance. These gauges are often used to check the clearance around bearings and other machine parts, making sure there’s enough space to avoid friction and prevent wear. The leaves are riveted together in a folding fan design, so they’re easy to carry. Each leaf is marked with thickness for quick reference.
Steel and tool steel leaves are stronger, harder, and more wear resistant than stainless steel and brass leaves. Stainless steel leaves are less likely to rust than steel and tool steel leaves.
Sets with a leaf-securing lock hold individual leaves in place so they don’t move and disrupt measurements.
Leaf | Closed | |||||||
|---|---|---|---|---|---|---|---|---|
| No. of Leaves | Thick. | Lg. | Wd. | Lg. | Wd. | Features | Each | |
Flat Round Leaves | ||||||||
Steel | ||||||||
| 25 | 0.0015", 0.002" to 0.021" (0.001" increments), 0.025", 0.027", 0.03", 0.04" | 24" | 1/2" | 24 1/4" | 1/2" | Leaf-Securing Lock | 0000000 | 0000000 |
| 25 | 0.04 mm, 0.05 mm, 0.06 mm, 0.07 mm, 0.08 mm, 0.09 mm, 0.10 to 1.0 mm (0.05 mm increments) | 12" | 1/2" | 12 1/4" | 1/2" | __ | 000000 | 000000 |
Stainless Steel | ||||||||
| 18 | 0.0015", 0.002", 0.0025", 0.003", 0.0035", 0.004" to 0.01" (0.001" increments), 0.012", 0.015", 0.016", 0.018", 0.02", 0.025" | 3" | 1/2" | 3 1/4" | 1/2" | Leaf-Securing Lock | 00000000 | 00000 |
| 25 | 0.0015", 0.002" to 0.025" (0.001" increments) | 12" | 1/2" | 12 3/8" | 1/2" | Leaf-Securing Lock | 0000000 | 000000 |
| 25 | 0.0015", 0.002" to 0.025" (0.001" increments) | 24" | 1/2" | 24 1/4" | 1/2" | Leaf-Securing Lock | 00000000 | 000000 |
Starrett Feeler Gauge Sets
Check gaps, alignment, and narrow slots with these feeler gauge sets that include leaves in a variety of thicknesses riveted together in a fan design. Sets fold up for portability. Each leaf is marked with thickness. Leaf-securing locks hold individual gauge leaves in place.
Stainless steel gauge sets are less likely to rust than tool steel.
Leaf | Closed | |||||||
|---|---|---|---|---|---|---|---|---|
| No. of Leaves | Thick. | Lg. | Wd. | Lg. | Wd. | Manufacturer Model No. | Each | |
301 Stainless Steel  | ||||||||
| 8 | 0.002", 0.003", 0.004", 0.005", 0.006", 0.008", 0.01", 0.015" | 12" | 1/2" | 12 7/16" | 1/2" | 172ES | 0000000 | 0000000 |
| 9 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.012", 0.015" | 3" | 1/2" | 3 7/16" | 1/2" | 172AS | 0000000 | 00000 |
| 13 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.02", 0.03", 0.04", 0.075", 0.1", 0.2" | 4 1/2" | 1/2" | 4 15/16" | 1/2" | 467S | 0000000 | 000000 |
| 31 | 0.0015", 0.002", 0.0025", 0.003" to 0.026" (0.001" increments), 0.028", 0.03", 0.032", 0.035" | 3" | 1/2" | 3 7/16" | 1/2" | 66BS | 0000000 | 000000 |
Starrett Feeler Gauge Sets with Calibration Certificate
To ensure accurate readings, these sets come with a certificate of calibration traceable to NIST that states they’ve passed a test for accuracy. They are used to check gaps, alignment, and narrow slots. Gauge leaves are riveted together in a fan design that folds up for portability. Each leaf is marked with thickness. Leaf-securing locks hold individual gauge leaves in place.
Stainless steel gauge sets are less likely to rust than tool steel gauge sets.
Leaf | Closed | |||||||
|---|---|---|---|---|---|---|---|---|
| No. of Leaves | Thick. | Lg. | Wd. | Lg. | Wd. | Manufacturer Model No. | Each | |
301 Stainless Steel | ||||||||
| 8 | 0.002", 0.003", 0.004", 0.005", 0.006", 0.008", 0.01", 0.015" | 12" | 1/2" | 12 7/16" | 1/2" | 172ES | 00000000 | 0000000 |
| 9 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.012", 0.015" | 3" | 1/2" | 3 7/16" | 1/2" | 172AS | 00000000 | 000000 |
| 13 | 0.0015", 0.002", 0.003", 0.004", 0.006", 0.008", 0.01", 0.02", 0.03", 0.04", 0.075", 0.1", 0.2" | 4 1/2" | 1/2" | 4 15/16" | 1/2" | 467S | 00000000 | 000000 |
| 31 | 0.0015", 0.002", 0.0025", 0.003" to 0.026" (0.001" increments), 0.028", 0.03", 0.032", 0.035" | 3" | 1/2" | 3 7/16" | 1/2" | 66BS | 00000000 | 000000 |
Starrett Feeler Gauge Sets for Tight Spots
To measure thickness in areas where standard feeler gauges don’t fit, these sets have leaves with narrow ends. They're used to check gaps, alignment, and narrow slots. Sets include leaves in a variety of thicknesses that are riveted together in a fan design that folds up for portability. Each leaf is marked with thickness. Leaf-securing locks hold individual gauge leaves in place.
Stainless steel gauges are less likely to rust than tool steel gauges.
Starrett Feeler Gauge Sets for Tight Spots with Calibration Certificate
A certificate of calibration traceable to NIST states that these sets have passed a test for accuracy. They’re used to check small gaps, narrow slots, and alignment. The leaves have a narrow end to measure thickness in areas where standard feeler gauges don’t fit. For example, they can measure gaps when setting engine components such as spark plugs to make sure there’s enough space so friction doesn’t lead to inefficiency.
Sets include leaves in a variety of thicknesses that are riveted together in a fan design that folds up for portability. Each leaf is marked with thickness. Leaf-securing locks hold individual gauge leaves in place.
Stainless steel gauge sets are less likely to rust than tool steel gauge sets.
Tapered-Width Feeler Gauge Sets
Check slot widths and hole diameters with the markings on these gauges. Leaves in a variety of sizes are riveted together in a fan design—spread them out for use or fold them in for portability. Each leaf narrows toward the tip to measure a range of sizes. Slide them into a hole until the gauge sits snug and then read the width measurement.
Stainless steel gauges are less likely to rust than steel gauges.
Closed | ||||||
|---|---|---|---|---|---|---|
| No. of Leaves | Wd. | Leaf Lg. | Lg. | Wd. | Each | |
Stainless Steel | ||||||
| 4 | 1 mm to 29 mm (.05 mm increments) | 5 1/4" | 5 1/4" | 1 1/8" | 0000000 | 000000 |
Ready-to-Use Feeler Gauges
Check gaps, alignment, and narrow slots. These feeler gauges have finished ends marked with thickness.
302/304 stainless steel gauges are more corrosion resistant than brass and steel.
316 stainless steel gauges have the best corrosion resistance.
Each | |||||
|---|---|---|---|---|---|
| Thick. | Lg. | Wd. | 1-11 | 12-Up | |
302/304 Stainless Steel | |||||
| 0.0005" | 12" | 1/2" | 0000000 | 000000 | 00000 |
| 0.001" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.0015" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.002" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.0025" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.003" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.004" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.005" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.006" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.007" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.008" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.009" | 12" | 1/2" | 0000000 | 0000 | 0000 |
| 0.01" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.012" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.015" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.016" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.018" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.02" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.025" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.031" | 12" | 1/2" | 00000000 | 0000 | 0000 |
| 0.04mm | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.05mm | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.06mm | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.07mm | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.08mm | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.09mm | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.1mm | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.15mm | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.2mm | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.25mm | 12" | 1/2" | 0000000 | 0000 | 0000 |
| 0.3mm | 12" | 1/2" | 0000000 | 0000 | 0000 |
| 0.4mm | 12" | 1/2" | 0000000 | 0000 | 0000 |
| 0.45mm | 12" | 1/2" | 0000000 | 0000 | 0000 |
| 0.5mm | 12" | 1/2" | 0000000 | 0000 | 0000 |
| 0.6mm | 12" | 1/2" | 0000000 | 0000 | 0000 |
| 0.8mm | 12" | 1/2" | 0000000 | 0000 | 0000 |
316 Stainless Steel | |||||
| 0.001" | 12" | 1/2" | 000000 | 00000 | 00000 |
| 0.002" | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.003" | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.004" | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.005" | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.01" | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.012" | 12" | 1/2" | 000000 | 0000 | 0000 |
| 0.015" | 12" | 1/2" | 000000 | 00000 | 0000 |
| 0.02" | 12" | 1/2" | 0000000 | 00000 | 0000 |
| 0.03" | 12" | 1/2" | 0000000 | 00000 | 00000 |
Feeler Gauge Rolls
Cut to your desired length. These gauge rolls let you check gaps, alignment, and narrow slots. Thickness is marked every 6 inches.
302/304 stainless steel gauge rolls are more corrosion resistant than brass and steel.
316 stainless steel gauge rolls have the best corrosion resistance.
| Thick. | Lg., ft. | Wd. | Container Type | Each | |
302/304 Stainless Steel | |||||
|---|---|---|---|---|---|
| 0.0005" | 10 | 1/2" | Dispenser Box | 000000 | 000000 |
| 0.001" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.0015" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.002" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.0025" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.003" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.004" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.005" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.006" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.007" | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.008" | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.009" | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.01" | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.012" | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.015" | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.016" | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.018" | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.02" | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.025" | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.031" | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.04mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.05mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.06mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.07mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.08mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.09mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.1mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.15mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.2mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.25mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.3mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.4mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.45mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.5mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.6mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.8mm | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
316 Stainless Steel | |||||
| 0.001" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.002" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.003" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.004" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.005" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.01" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.012" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.015" | 10 | 1/2" | Dispenser Box | 000000 | 00000 |
| 0.02" | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
| 0.03" | 10 | 1/2" | Dispenser Box | 0000000 | 00000 |
Feeler Gauge Assortments
Use these feeler gauge assortments to check gaps, alignment, and narrow slots. They have finished ends marked with thickness.
302/304 stainless steel gauge assortments are more corrosion resistant than brass and steel.
| No. of Pieces | Thick. | Lg. | Wd. | Container Type | Each | |
302/304 Stainless Steel | ||||||
|---|---|---|---|---|---|---|
| 20 | 0.0005", 0.001", 0.0015", 0.002", 0.0025", 0.003" to 0.01" (0.001" increments), 0.012", 0.015", 0.016", 0.018", 0.02", 0.025", 0.031" | 6" | 1/2" | Pouch | 0000000 | 000000 |
| 20 | 0.0005", 0.001", 0.0015", 0.002", 0.0025", 0.003" to 0.01" (0.001" increments), 0.012", 0.015", 0.016", 0.018", 0.02", 0.025", 0.031" | 12" | 1/2" | __ | 0000000 | 00000 |
Tapered-Width Feeler Gauges
Confirm slots, holes, and mating surfaces on parts are properly sized. Narrow at one end, these feeler gauges measure a range of sizes. Slide them into a hole until the gauge sits snug and then read the width measurement. All have a range of width markings for quick reference. Made of either stainless steel or plastic, they resist corrosion.