McMaster-Carr logo
    Filter by
    Shape
    Gender
    System of Measurement
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Industrial Info Compare
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    882 Products

    Performance

    Performance

    Female Threaded Round Standoffs

    Image of Product. Front orientation. Standoffs. Female Threaded Round Standoffs.
    Image of Attribute. Fully Threaded. Front orientation. Contains Annotated. Fully Threaded. Female Threaded Round Standoffs.
    Image of Attribute. Threaded on Both Ends. Front orientation. Threaded on Both Ends. Female Threaded Round Standoffs.

    Fully

    Threaded

    Threaded on

    Both Ends

    Stack male-threaded components and create a clean, flush connection between them.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these standoffs resist rusting. They're strong enough for most jobs, but won't withstand stress as well as steel.
    Zinc-Plated Carbon Steel—Best for dry environments since moisture will cause these standoffs to rust.
    Lightweight Aluminum—One-third the weight of steel, these standoffs are commonly used in applications with weight limitations. They resist rust as well as stainless steel, but they're not as strong.
    Zinc-Plated Brass—Typically chosen for their warm, polished look, these standoffs are suitable for outdoor, low-stress applications. The zinc plating resists corrosion, but brass is softer than other metals, so these standoffs may deform under high stress.
    Nickel-Chrome-Plated Carbon Steel—Choose these standoffs when you want a mirror-like finish. They have minimal corrosion resistance, so they're best suited for dry environments.
    Lg.
    OD
    Threading
    Thread
    Lg.
    Min. Thread
    Lg.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Corrosion-Resistant 18-8 Stainless Steel
     
    0-80
    1/4"1/8"Fully Threaded1/4"—ASTM A581/A582100000000000000
    5/16"1/8"Fully Threaded5/16"—ASTM A581/A58210000000000000
    3/8"1/8"Threaded on Both Ends—1/8"ASTM A581/A58210000000000000
    1/2"1/8"Threaded on Both Ends—1/8"ASTM A581/A58210000000000000
     
    2-56
    1/4"1/8"Fully Threaded1/4"—ASTM A581/A58210000000000000
    5/16"1/8"Fully Threaded5/16"—ASTM A581/A58210000000000000
    3/8"1/8"Fully Threaded3/8"—ASTM A581/A58210000000000000
    1/2"1/8"Fully Threaded1/2"—ASTM A581/A58210000000000000
     
    4-40
    1/8"1/4"Fully Threaded1/8"—ASTM A581/A58210000000000000
    5/32"1/4"Fully Threaded5/32"—ASTM A581/A58210000000000000
    3/16"1/4"Fully Threaded3/16"—ASTM A581/A58210000000000000
    7/32"1/4"Fully Threaded7/32"—ASTM A581/A58210000000000000
    1/4"1/4"Fully Threaded1/4"—ASTM A581/A58210000000000000
    9/32"1/4"Fully Threaded9/32"—ASTM A581/A58210000000000000
    5/16"1/4"Fully Threaded5/16"—ASTM A581/A58210000000000000
    11/32"1/4"Fully Threaded11/32"—ASTM A581/A58210000000000000
    3/8"1/4"Fully Threaded3/8"—ASTM A581/A58210000000000000
    13/32"1/4"Fully Threaded13/32"—ASTM A581/A58210000000000000
    7/16"1/4"Fully Threaded7/16"—ASTM A581/A58210000000000000
    15/32"1/4"Fully Threaded15/32"—ASTM A581/A58210000000000000
    1/2"1/4"Fully Threaded1/2"—ASTM A581/A58210000000000000
    9/16"1/4"Fully Threaded9/16"—ASTM A58210000000000000
    5/8"1/4"Fully Threaded5/8"—ASTM A581/A58210000000000000
    3/4"1/4"Fully Threaded3/4"—ASTM A581/A58210000000000000
    7/8"1/4"Threaded on Both Ends—1/4"ASTM A581/A58210000000000000
    1"1/4"Threaded on Both Ends—1/4"ASTM A581/A58210000000000000
    1 1/4"1/4"Threaded on Both Ends—1/4"ASTM A581/A58210000000000000
    1 1/2"1/4"Threaded on Both Ends—1/4"ASTM A581/A58210000000000000
    2"1/4"Threaded on Both Ends—1/4"ASTM A581/A58210000000000000
    2 1/2"1/4"Threaded on Both Ends—1/4"ASTM A581/A58210000000000000
    3"1/4"Threaded on Both Ends—1/4"ASTM A581/A58210000000000000
    3 1/2"1/4"Threaded on Both Ends—1/4"ASTM A581/A58210000000000000
    4"1/4"Threaded on Both Ends—1/4"ASTM A581/A58210000000000000
     
    6-32
    1/8"1/4"Fully Threaded1/8"—ASTM A581/A58210000000000000
    5/32"1/4"Fully Threaded5/32"—ASTM A581/A58210000000000000
    3/16"1/4"Fully Threaded3/16"—ASTM A581/A58210000000000000
    7/32"1/4"Fully Threaded7/32"—ASTM A581/A58210000000000000
    1/4"1/4"Fully Threaded1/4"—ASTM A581/A58210000000000000
    9/32"1/4"Fully Threaded9/32"—ASTM A581/A58210000000000000
    5/16"1/4"Fully Threaded5/16"—ASTM A581/A58210000000000000
    11/32"1/4"Fully Threaded11/32"—ASTM A581/A58210000000000000
    3/8"1/4"Fully Threaded3/8"—ASTM A581/A58210000000000000
    3/8"3/8"Fully Threaded3/8"—ASTM A58210000000000000
    13/32"1/4"Fully Threaded13/32"—ASTM A581/A58210000000000000
    7/16"1/4"Fully Threaded7/16"—ASTM A581/A58210000000000000
    15/32"1/4"Fully Threaded15/32"—ASTM A581/A58210000000000000
    1/2"1/4"Fully Threaded1/2"—ASTM A581/A58210000000000000
    1/2"3/8"Fully Threaded1/2"—ASTM A58210000000000000
    9/16"1/4"Fully Threaded9/16"—ASTM A58210000000000000
    5/8"1/4"Fully Threaded5/8"—ASTM A581/A58210000000000000
    3/4"1/4"Fully Threaded3/4"—ASTM A581/A58210000000000000
    3/4"3/8"Fully Threaded3/4"—ASTM A58210000000000000
    7/8"1/4"Fully Threaded7/8"—ASTM A581/A58210000000000000
    1"1/4"Fully Threaded1"—ASTM A581/A58210000000000000
    1"3/8"Fully Threaded1"—ASTM A58210000000000000
    1 1/4"1/4"Threaded on Both Ends—3/8"ASTM A581/A58210000000000000
    1 1/2"1/4"Threaded on Both Ends—3/8"ASTM A581/A58210000000000000
    2"1/4"Threaded on Both Ends—3/8"ASTM A581/A58210000000000000
    2 1/2"1/4"Threaded on Both Ends—3/8"ASTM A581/A58210000000000000
    3"1/4"Threaded on Both Ends—3/8"ASTM A581/A58210000000000000
    3 1/2"1/4"Threaded on Both Ends—3/8"ASTM A581/A58210000000000000
    4"1/4"Threaded on Both Ends—3/8"ASTM A581/A58210000000000000
     
    8-32
    1/8"1/4"Fully Threaded1/8"—ASTM A581/A58210000000000000
    5/32"1/4"Fully Threaded5/32"—ASTM A581/A58210000000000000
    3/16"1/4"Fully Threaded3/16"—ASTM A581/A58210000000000000
    7/32"1/4"Fully Threaded7/32"—ASTM A581/A58210000000000000
    1/4"1/4"Fully Threaded1/4"—ASTM A581/A58210000000000000
    9/32"1/4"Fully Threaded9/32"—ASTM A581/A58210000000000000
    5/16"1/4"Fully Threaded5/16"—ASTM A581/A58210000000000000
    11/32"1/4"Fully Threaded11/32"—ASTM A581/A58210000000000000
    3/8"1/4"Fully Threaded3/8"—ASTM A581/A58210000000000000
    3/8"3/8"Fully Threaded3/8"—ASTM A58210000000000000
    13/32"1/4"Fully Threaded13/32"—ASTM A581/A58210000000000000
    7/16"1/4"Fully Threaded7/16"—ASTM A581/A58210000000000000
    15/32"1/4"Fully Threaded15/32"—ASTM A581/A58210000000000000
    1/2"1/4"Fully Threaded1/2"—ASTM A581/A58210000000000000
    1/2"3/8"Fully Threaded1/2"—ASTM A58210000000000000
    9/16"1/4"Fully Threaded9/16"—ASTM A58210000000000000
    5/8"1/4"Fully Threaded5/8"—ASTM A581/A58210000000000000
    3/4"1/4"Fully Threaded3/4"—ASTM A581/A58210000000000000
    3/4"3/8"Fully Threaded3/4"—ASTM A58210000000000000
    7/8"1/4"Fully Threaded7/8"—ASTM A581/A58210000000000000
    1"1/4"Fully Threaded1"—ASTM A581/A58210000000000000
    1"3/8"Fully Threaded1"—ASTM A58210000000000000
    1 1/4"1/4"Threaded on Both Ends—7/16"ASTM A581/A58210000000000000
    1 1/2"1/4"Threaded on Both Ends—7/16"ASTM A581/A58210000000000000
    2"1/4"Threaded on Both Ends—7/16"ASTM A581/A58210000000000000
    2 1/2"1/4"Threaded on Both Ends—7/16"ASTM A581/A58210000000000000
    3"1/4"Threaded on Both Ends—7/16"ASTM A581/A58210000000000000
    3 1/2"1/4"Threaded on Both Ends—7/16"ASTM A581/A58210000000000000
    4"1/4"Threaded on Both Ends—7/16"ASTM A581/A58210000000000000
     
    10-32
    1/8"1/4"Fully Threaded1/8"—ASTM A581/A58210000000000000
    5/32"1/4"Fully Threaded5/32"—ASTM A581/A58210000000000000
    3/16"1/4"Fully Threaded3/16"—ASTM A581/A58210000000000000
    7/32"1/4"Fully Threaded7/32"—ASTM A581/A58210000000000000
    1/4"1/4"Fully Threaded1/4"—ASTM A581/A58210000000000000
    9/32"1/4"Fully Threaded9/32"—ASTM A581/A58210000000000000
    5/16"1/4"Fully Threaded5/16"—ASTM A581/A58210000000000000
    11/32"1/4"Fully Threaded11/32"—ASTM A581/A58210000000000000
    3/8"1/4"Fully Threaded3/8"—ASTM A581/A58210000000000000
    3/8"3/8"Fully Threaded3/8"—ASTM A58210000000000000
    13/32"1/4"Fully Threaded13/32"—ASTM A581/A58210000000000000
    7/16"1/4"Fully Threaded7/16"—ASTM A581/A58210000000000000
    15/32"1/4"Fully Threaded15/32"—ASTM A581/A58210000000000000
    1/2"1/4"Fully Threaded1/2"—ASTM A581/A58210000000000000
    1/2"3/8"Fully Threaded1/2"—ASTM A58210000000000000
    1/2"1/2"Fully Threaded1/2"—ASTM A58210000000000000
    9/16"1/4"Fully Threaded9/16"—ASTM A58210000000000000
    5/8"1/4"Fully Threaded5/8"—ASTM A581/A58210000000000000
    3/4"1/4"Fully Threaded3/4"—ASTM A581/A58210000000000000
    3/4"3/8"Fully Threaded3/4"—ASTM A58210000000000000
    3/4"1/2"Fully Threaded3/4"—ASTM A58210000000000000
    7/8"1/4"Fully Threaded7/8"—ASTM A581/A58210000000000000
    1"1/4"Fully Threaded1"—ASTM A581/A58210000000000000
    1"3/8"Fully Threaded1"—ASTM A58210000000000000
    1"1/2"Fully Threaded1"—ASTM A58210000000000000
    1 1/4"1/4"Threaded on Both Ends—1/2"ASTM A581/A58210000000000000
    1 1/2"1/4"Threaded on Both Ends—1/2"ASTM A581/A58210000000000000
    1 1/2"1/2"Threaded on Both Ends—1/2"ASTM A58210000000000000
    2"1/4"Threaded on Both Ends—1/2"ASTM A581/A58210000000000000
    2"1/2"Threaded on Both Ends—1/2"ASTM A58210000000000000
    2 1/2"1/4"Threaded on Both Ends—1/2"ASTM A581/A58210000000000000
    3"1/4"Threaded on Both Ends—1/2"ASTM A581/A58210000000000000
    3 1/2"1/4"Threaded on Both Ends—1/2"ASTM A581/A58210000000000000
    4"1/4"Threaded on Both Ends—1/2"ASTM A581/A58210000000000000
     
    1/4"-20
    1/2"1/2"Fully Threaded1/2"—ASTM A58210000000000000
    3/4"1/2"Fully Threaded3/4"—ASTM A58210000000000000
    1"1/2"Fully Threaded1"—ASTM A58210000000000000
    1 1/2"1/2"Threaded on Both Ends—5/8"ASTM A58210000000000000
    2"1/2"Threaded on Both Ends—5/8"ASTM A58210000000000000
     
    Zinc-Plated Carbon Steel
     
    0-80
    1/4"1/8"Fully Threaded1/4"——10000000000000
    5/16"1/8"Fully Threaded5/16"——10000000000000
    3/8"1/8"Fully Threaded3/8"——10000000000000
    1/2"1/8"Threaded on Both Ends—3/16"—10000000000000
     
    2-56
    1/4"1/8"Fully Threaded1/4"——10000000000000
    5/16"1/8"Fully Threaded5/16"——10000000000000
    3/8"1/8"Fully Threaded3/8"——10000000000000
    1/2"1/8"Fully Threaded1/2"——10000000000000
     
    4-40
    1/8"1/4"Fully Threaded1/8"——10000000000000
    5/32"1/4"Fully Threaded5/32"——10000000000000
    3/16"1/4"Fully Threaded3/16"——10000000000000
    7/32"1/4"Fully Threaded7/32"——10000000000000
    1/4"1/4"Fully Threaded1/4"——10000000000000
    9/32"1/4"Fully Threaded9/32"——10000000000000
    5/16"1/4"Fully Threaded5/16"——10000000000000
    11/32"1/4"Fully Threaded11/32"——10000000000000
    3/8"1/4"Fully Threaded3/8"——10000000000000
    13/32"1/4"Fully Threaded13/32"——10000000000000
    7/16"1/4"Fully Threaded7/16"——10000000000000
    15/32"1/4"Fully Threaded15/32"——10000000000000
    1/2"1/4"Fully Threaded1/2"——10000000000000
    5/8"1/4"Fully Threaded5/8"——10000000000000
    3/4"1/4"Fully Threaded3/4"——10000000000000
    7/8"1/4"Fully Threaded7/8"——10000000000000
    1"1/4"Fully Threaded1"——10000000000000
    1 1/4"1/4"Threaded on Both Ends—1/4"—10000000000000
    1 1/2"1/4"Threaded on Both Ends—1/4"—10000000000000
    2"1/4"Threaded on Both Ends—1/4"—10000000000000
    2 1/2"1/4"Threaded on Both Ends—1/4"—10000000000000
    3"1/4"Threaded on Both Ends—1/4"—10000000000000
    3 1/2"1/4"Threaded on Both Ends—1/4"—10000000000000
    4"1/4"Threaded on Both Ends—1/4"—10000000000000
     
    6-32
    1/8"1/4"Fully Threaded1/8"——10000000000000
    5/32"1/4"Fully Threaded5/32"——10000000000000
    3/16"1/4"Fully Threaded3/16"——10000000000000
    7/32"1/4"Fully Threaded7/32"——10000000000000
    1/4"1/4"Fully Threaded1/4"——10000000000000
    9/32"1/4"Fully Threaded9/32"——10000000000000
    5/16"1/4"Fully Threaded5/16"——10000000000000
    11/32"1/4"Fully Threaded11/32"——10000000000000
    3/8"1/4"Fully Threaded3/8"——10000000000000
    13/32"1/4"Fully Threaded13/32"——10000000000000
    7/16"1/4"Fully Threaded7/16"——10000000000000
    15/32"1/4"Fully Threaded15/32"——10000000000000
    1/2"1/4"Fully Threaded1/2"——10000000000000
    5/8"1/4"Fully Threaded5/8"——10000000000000
    3/4"1/4"Fully Threaded3/4"——10000000000000
    7/8"1/4"Fully Threaded7/8"——10000000000000
    1"1/4"Fully Threaded1"——10000000000000
    1 1/4"1/4"Threaded on Both Ends—3/8"—10000000000000
    1 1/2"1/4"Threaded on Both Ends—3/8"—10000000000000
    2"1/4"Threaded on Both Ends—3/8"—10000000000000
    2 1/2"1/4"Threaded on Both Ends—3/8"—10000000000000
    3"1/4"Threaded on Both Ends—3/8"—10000000000000
    3 1/2"1/4"Threaded on Both Ends—3/8"—10000000000000
    4"1/4"Threaded on Both Ends—3/8"—10000000000000
     
    8-32
    1/8"1/4"Fully Threaded1/8"——10000000000000
    5/32"1/4"Fully Threaded5/32"——10000000000000
    3/16"1/4"Fully Threaded3/16"——10000000000000
    7/32"1/4"Fully Threaded7/32"——10000000000000
    1/4"1/4"Fully Threaded1/4"——10000000000000
    9/32"1/4"Fully Threaded9/32"——10000000000000
    5/16"1/4"Fully Threaded5/16"——10000000000000
    11/32"1/4"Fully Threaded11/32"——10000000000000
    3/8"1/4"Fully Threaded3/8"——10000000000000
    13/32"1/4"Fully Threaded13/32"——10000000000000
    7/16"1/4"Fully Threaded7/16"——10000000000000
    15/32"1/4"Fully Threaded15/32"——10000000000000
    1/2"1/4"Fully Threaded1/2"——10000000000000
    5/8"1/4"Fully Threaded5/8"——10000000000000
    3/4"1/4"Fully Threaded3/4"——10000000000000
    7/8"1/4"Fully Threaded7/8"——10000000000000
    1"1/4"Fully Threaded1"——10000000000000
    1 1/4"1/4"Threaded on Both Ends—7/16"—10000000000000
    1 1/2"1/4"Threaded on Both Ends—7/16"—10000000000000
    2"1/4"Threaded on Both Ends—7/16"—10000000000000
    2 1/2"1/4"Threaded on Both Ends—7/16"—10000000000000
    3"1/4"Threaded on Both Ends—7/16"—10000000000000
    3 1/2"1/4"Threaded on Both Ends—7/16"—10000000000000
    4"1/4"Threaded on Both Ends—7/16"—10000000000000
     
    10-32
    1/8"1/4"Fully Threaded1/8"——10000000000000
    5/32"1/4"Fully Threaded5/32"——10000000000000
    3/16"1/4"Fully Threaded3/16"——10000000000000
    7/32"1/4"Fully Threaded7/32"——10000000000000
    1/4"1/4"Fully Threaded1/4"——10000000000000
    9/32"1/4"Fully Threaded9/32"——10000000000000
    5/16"1/4"Fully Threaded5/16"——10000000000000
    11/32"1/4"Fully Threaded11/32"——10000000000000
    3/8"1/4"Fully Threaded3/8"——10000000000000
    13/32"1/4"Fully Threaded13/32"——10000000000000
    7/16"1/4"Fully Threaded7/16"——10000000000000
    15/32"1/4"Fully Threaded15/32"——10000000000000
    1/2"1/4"Fully Threaded1/2"——10000000000000
    5/8"1/4"Fully Threaded5/8"——10000000000000
    3/4"1/4"Fully Threaded3/4"——10000000000000
    7/8"1/4"Fully Threaded7/8"——10000000000000
    1"1/4"Fully Threaded1"——10000000000000
    1 1/4"1/4"Threaded on Both Ends—1/2"—10000000000000
    1 1/2"1/4"Threaded on Both Ends—1/2"—10000000000000
    2"1/4"Threaded on Both Ends—1/2"—10000000000000
    2 1/2"1/4"Threaded on Both Ends—1/2"—10000000000000
    3"1/4"Threaded on Both Ends—1/2"—10000000000000
    3 1/2"1/4"Threaded on Both Ends—1/2"—10000000000000
    4"1/4"Threaded on Both Ends—1/2"—10000000000000
     
    3/8"-16
    6"1/2"Threaded on Both Ends5/8"—ASTM B633100000000000000
    1 ft.1/2"Threaded on Both Ends5/8"—ASTM B633100000000000000
    2 ft.1/2"Threaded on Both Ends5/8"—ASTM B633100000000000000
     
    Lightweight Aluminum
     
    0-80
    1/4"1/8"Fully Threaded1/4"——10000000000000
    5/16"1/8"Fully Threaded5/16"——10000000000000
    3/8"1/8"Fully Threaded3/8"——10000000000000
    1/2"1/8"Threaded on Both Ends—3/16"—10000000000000
     
    2-56
    1/4"1/8"Fully Threaded1/4"——10000000000000
    5/16"1/8"Fully Threaded5/16"——10000000000000
    3/8"1/8"Fully Threaded3/8"——10000000000000
    1/2"1/8"Fully Threaded1/2"——10000000000000
     
    4-40
    1/8"1/4"Fully Threaded1/8"——10000000000000
    5/32"1/4"Fully Threaded5/32"——10000000000000
    3/16"1/4"Fully Threaded3/16"——10000000000000
    7/32"1/4"Fully Threaded7/32"——10000000000000
    1/4"1/4"Fully Threaded1/4"——10000000000000
    9/32"1/4"Fully Threaded9/32"——10000000000000
    5/16"1/4"Fully Threaded5/16"——10000000000000
    11/32"1/4"Fully Threaded11/32"——10000000000000
    3/8"1/4"Fully Threaded3/8"——10000000000000
    13/32"1/4"Fully Threaded13/32"——10000000000000
    7/16"1/4"Fully Threaded7/16"——10000000000000
    15/32"1/4"Fully Threaded15/32"——10000000000000
    1/2"1/4"Fully Threaded1/2"——10000000000000
    9/16"1/4"Fully Threaded9/16"——10000000000000
    5/8"1/4"Fully Threaded5/8"——10000000000000
    3/4"1/4"Fully Threaded3/4"——10000000000000
    7/8"1/4"Fully Threaded7/8"——10000000000000
    1"1/4"Fully Threaded1"——10000000000000
    1 1/4"1/4"Threaded on Both Ends—1/4"—10000000000000
    1 1/2"1/4"Threaded on Both Ends—1/4"—10000000000000
    2"1/4"Threaded on Both Ends—1/4"—10000000000000
    2 1/2"1/4"Threaded on Both Ends—1/4"—10000000000000
    3"1/4"Threaded on Both Ends—1/4"—10000000000000
    3 1/2"1/4"Threaded on Both Ends—1/4"—10000000000000
    4"1/4"Threaded on Both Ends—1/4"—10000000000000
     
    6-32
    1/8"1/4"Fully Threaded1/8"——10000000000000
    5/32"1/4"Fully Threaded5/32"——10000000000000
    3/16"1/4"Fully Threaded3/16"——10000000000000
    7/32"1/4"Fully Threaded7/32"——10000000000000
    1/4"1/4"Fully Threaded1/4"——10000000000000
    9/32"1/4"Fully Threaded9/32"——10000000000000
    5/16"1/4"Fully Threaded5/16"——10000000000000
    11/32"1/4"Fully Threaded11/32"——10000000000000
    3/8"1/4"Fully Threaded3/8"——10000000000000
    3/8"3/8"Fully Threaded3/8"——10000000000000
    13/32"1/4"Fully Threaded13/32"——10000000000000
    7/16"1/4"Fully Threaded7/16"——10000000000000
    15/32"1/4"Fully Threaded15/32"——10000000000000
    1/2"1/4"Fully Threaded1/2"——10000000000000
    1/2"3/8"Fully Threaded1/2"——10000000000000
    9/16"1/4"Fully Threaded9/16"——10000000000000
    5/8"1/4"Fully Threaded5/8"——10000000000000
    3/4"1/4"Fully Threaded3/4"——10000000000000
    3/4"3/8"Fully Threaded3/4"——10000000000000
    7/8"1/4"Fully Threaded7/8"——10000000000000
    1"1/4"Fully Threaded1"——10000000000000
    1"3/8"Fully Threaded1"——10000000000000
    1 1/4"1/4"Threaded on Both Ends—3/8"—10000000000000
    1 1/2"1/4"Threaded on Both Ends—3/8"—10000000000000
    2"1/4"Threaded on Both Ends—3/8"—10000000000000
    2 1/2"1/4"Threaded on Both Ends—3/8"—10000000000000
    3"1/4"Threaded on Both Ends—3/8"—10000000000000
    3 1/2"1/4"Threaded on Both Ends—3/8"—10000000000000
    4"1/4"Threaded on Both Ends—3/8"—10000000000000
     
    8-32
    1/8"1/4"Fully Threaded1/8"——10000000000000
    5/32"1/4"Fully Threaded5/32"——10000000000000
    3/16"1/4"Fully Threaded3/16"——10000000000000
    7/32"1/4"Fully Threaded7/32"——10000000000000
    1/4"1/4"Fully Threaded1/4"——10000000000000
    9/32"1/4"Fully Threaded9/32"——10000000000000
    5/16"1/4"Fully Threaded5/16"——10000000000000
    11/32"1/4"Fully Threaded11/32"——10000000000000
    3/8"1/4"Fully Threaded3/8"——10000000000000
    3/8"3/8"Fully Threaded3/8"——10000000000000
    13/32"1/4"Fully Threaded13/32"——10000000000000
    7/16"1/4"Fully Threaded7/16"——10000000000000
    15/32"1/4"Fully Threaded15/32"——10000000000000
    1/2"1/4"Fully Threaded1/2"——10000000000000
    1/2"3/8"Fully Threaded1/2"——10000000000000
    9/16"1/4"Fully Threaded9/16"——10000000000000
    5/8"1/4"Fully Threaded5/8"——10000000000000
    3/4"1/4"Fully Threaded3/4"——10000000000000
    3/4"3/8"Fully Threaded3/4"——10000000000000
    7/8"1/4"Fully Threaded7/8"——10000000000000
    1"1/4"Fully Threaded1"——10000000000000
    1"3/8"Fully Threaded1"——10000000000000
    1 1/4"1/4"Threaded on Both Ends—7/16"—10000000000000
    1 1/2"1/4"Threaded on Both Ends—7/16"—10000000000000
    2"1/4"Threaded on Both Ends—7/16"—10000000000000
    2 1/2"1/4"Threaded on Both Ends—7/16"—10000000000000
    3"1/4"Threaded on Both Ends—7/16"—10000000000000
    3 1/2"1/4"Threaded on Both Ends—7/16"—10000000000000
    4"1/4"Threaded on Both Ends—7/16"—10000000000000
     
    10-32
    1/8"1/4"Fully Threaded1/8"——10000000000000
    5/32"1/4"Fully Threaded5/32"——10000000000000
    3/16"1/4"Fully Threaded3/16"——10000000000000
    7/32"1/4"Fully Threaded7/32"——10000000000000
    1/4"1/4"Fully Threaded1/4"——10000000000000
    9/32"1/4"Fully Threaded9/32"——10000000000000
    5/16"1/4"Fully Threaded5/16"——10000000000000
    11/32"1/4"Fully Threaded11/32"——10000000000000
    3/8"1/4"Fully Threaded3/8"——10000000000000
    3/8"3/8"Fully Threaded3/8"——10000000000000
    13/32"1/4"Fully Threaded13/32"——10000000000000
    7/16"1/4"Fully Threaded7/16"——10000000000000
    15/32"1/4"Fully Threaded15/32"——10000000000000
    1/2"1/4"Fully Threaded1/2"——10000000000000
    1/2"3/8"Fully Threaded1/2"——10000000000000
    1/2"1/2"Fully Threaded1/2"——10000000000000
    9/16"1/4"Fully Threaded9/16"——10000000000000
    5/8"1/4"Fully Threaded5/8"——10000000000000
    3/4"1/4"Fully Threaded3/4"——10000000000000
    3/4"3/8"Fully Threaded3/4"——10000000000000
    3/4"1/2"Fully Threaded3/4"——10000000000000
    7/8"1/4"Fully Threaded7/8"——10000000000000
    1"1/4"Fully Threaded1"——10000000000000
    1"3/8"Fully Threaded1"——10000000000000
    1"1/2"Fully Threaded1"——10000000000000
    1 1/4"1/4"Threaded on Both Ends—1/2"—10000000000000
    1 1/2"1/4"Threaded on Both Ends—1/2"—10000000000000
    1 1/2"1/2"Threaded on Both Ends—1/2"—10000000000000
    2"1/4"Threaded on Both Ends—1/2"—10000000000000
    2"1/2"Threaded on Both Ends—1/2"—10000000000000
    2 1/2"1/4"Threaded on Both Ends—1/2"—10000000000000
    3"1/4"Threaded on Both Ends—1/2"—10000000000000
    3 1/2"1/4"Threaded on Both Ends—1/2"—10000000000000
    4"1/4"Threaded on Both Ends—1/2"—10000000000000
     
    1/4"-20
    1/2"1/2"Fully Threaded1/2"——10000000000000
    3/4"1/2"Fully Threaded3/4"——10000000000000
    1"1/2"Fully Threaded1"——10000000000000
    1 1/2"1/2"Threaded on Both Ends—5/8"—10000000000000
    2"1/2"Threaded on Both Ends—5/8"—10000000000000
     
    Zinc-Plated Brass
     
    0-80
    1/4"1/8"Fully Threaded1/4"—ASTM B1610000000000000
    5/16"1/8"Fully Threaded5/16"—ASTM B1610000000000000
    3/8"1/8"Fully Threaded3/8"—ASTM B1610000000000000
    1/2"1/8"Threaded on Both Ends—3/16"ASTM B1610000000000000
     
    2-56
    1/4"1/8"Fully Threaded1/4"—ASTM B1610000000000000
    5/16"1/8"Fully Threaded5/16"—ASTM B1610000000000000
    3/8"1/8"Fully Threaded3/8"—ASTM B1610000000000000
    1/2"1/8"Fully Threaded1/2"—ASTM B1610000000000000
     
    4-40
    3/16"1/4"Fully Threaded3/16"—ASTM B1610000000000000
    1/4"1/4"Fully Threaded1/4"—ASTM B1610000000000000
    5/16"1/4"Fully Threaded5/16"—ASTM B1610000000000000
    3/8"1/4"Fully Threaded3/8"—ASTM B1610000000000000
    7/16"1/4"Fully Threaded7/16"—ASTM B1610000000000000
    1/2"1/4"Fully Threaded1/2"—ASTM B1610000000000000
    5/8"1/4"Fully Threaded5/8"—ASTM B1610000000000000
    3/4"1/4"Fully Threaded3/4"—ASTM B1610000000000000
    7/8"1/4"Fully Threaded7/8"—ASTM B1610000000000000
    1"1/4"Fully Threaded1"—ASTM B1610000000000000
    1 1/4"1/4"Threaded on Both Ends—1/4"ASTM B1610000000000000
    1 1/2"1/4"Threaded on Both Ends—1/4"ASTM B1610000000000000
    2"1/4"Threaded on Both Ends—1/4"ASTM B1610000000000000
    2 1/2"1/4"Threaded on Both Ends—1/4"ASTM B1610000000000000
    3"1/4"Threaded on Both Ends—1/4"ASTM B1610000000000000
    3 1/2"1/4"Threaded on Both Ends—1/4"ASTM B1610000000000000
    4"1/4"Threaded on Both Ends—1/4"ASTM B1610000000000000
     
    6-32
    3/16"1/4"Fully Threaded3/16"—ASTM B1610000000000000
    1/4"1/4"Fully Threaded1/4"—ASTM B1610000000000000
    5/16"1/4"Fully Threaded5/16"—ASTM B1610000000000000
    3/8"1/4"Fully Threaded3/8"—ASTM B1610000000000000
    7/16"1/4"Fully Threaded7/16"—ASTM B1610000000000000
    1/2"1/4"Fully Threaded1/2"—ASTM B1610000000000000
    5/8"1/4"Fully Threaded5/8"—ASTM B1610000000000000
    3/4"1/4"Fully Threaded3/4"—ASTM B1610000000000000
    7/8"1/4"Fully Threaded7/8"—ASTM B1610000000000000
    1"1/4"Fully Threaded1"—ASTM B1610000000000000
    1 1/4"1/4"Threaded on Both Ends—3/8"ASTM B1610000000000000
    1 1/2"1/4"Threaded on Both Ends—3/8"ASTM B1610000000000000
    2"1/4"Threaded on Both Ends—3/8"ASTM B1610000000000000
    2 1/2"1/4"Threaded on Both Ends—3/8"ASTM B1610000000000000
    3"1/4"Threaded on Both Ends—3/8"ASTM B1610000000000000
    3 1/2"1/4"Threaded on Both Ends—3/8"ASTM B1610000000000000
    4"1/4"Threaded on Both Ends—3/8"ASTM B1610000000000000
     
    8-32
    3/16"1/4"Fully Threaded3/16"—ASTM B1610000000000000
    1/4"1/4"Fully Threaded1/4"—ASTM B1610000000000000
    5/16"1/4"Fully Threaded5/16"—ASTM B1610000000000000
    3/8"1/4"Fully Threaded3/8"—ASTM B1610000000000000
    7/16"1/4"Fully Threaded7/16"—ASTM B1610000000000000
    1/2"1/4"Fully Threaded1/2"—ASTM B1610000000000000
    5/8"1/4"Fully Threaded5/8"—ASTM B1610000000000000
    3/4"1/4"Fully Threaded3/4"—ASTM B1610000000000000
    7/8"1/4"Fully Threaded7/8"—ASTM B1610000000000000
    1"1/4"Fully Threaded1"—ASTM B1610000000000000
    1 1/4"1/4"Threaded on Both Ends—7/16"ASTM B1610000000000000
    1 1/2"1/4"Threaded on Both Ends—7/16"ASTM B1610000000000000
    2"1/4"Threaded on Both Ends—7/16"ASTM B1610000000000000
    2 1/2"1/4"Threaded on Both Ends—7/16"ASTM B1610000000000000
    3"1/4"Threaded on Both Ends—7/16"ASTM B1610000000000000
    3 1/2"1/4"Threaded on Both Ends—7/16"ASTM B1610000000000000
    4"1/4"Threaded on Both Ends—7/16"ASTM B1610000000000000
     
    10-32
    1/8"1/4"Fully Threaded1/8"—ASTM B1610000000000000
    3/16"1/4"Fully Threaded3/16"—ASTM B1610000000000000
    1/4"1/4"Fully Threaded1/4"—ASTM B1610000000000000
    5/16"1/4"Fully Threaded5/16"—ASTM B1610000000000000
    3/8"1/4"Fully Threaded3/8"—ASTM B1610000000000000
    7/16"1/4"Fully Threaded7/16"—ASTM B1610000000000000
    1/2"1/4"Fully Threaded1/2"—ASTM B1610000000000000
    5/8"1/4"Fully Threaded5/8"—ASTM B1610000000000000
    3/4"1/4"Fully Threaded3/4"—ASTM B1610000000000000
    7/8"1/4"Fully Threaded7/8"—ASTM B1610000000000000
    1"1/4"Fully Threaded1"—ASTM B1610000000000000
    1 1/4"1/4"Threaded on Both Ends—1/2"ASTM B1610000000000000
    1 1/2"1/4"Threaded on Both Ends—1/2"ASTM B1610000000000000
    2"1/4"Threaded on Both Ends—1/2"ASTM B1610000000000000
    2 1/2"1/4"Threaded on Both Ends—1/2"ASTM B1610000000000000
    3"1/4"Threaded on Both Ends—1/2"ASTM B1610000000000000
    3 1/2"1/4"Threaded on Both Ends—1/2"ASTM B1610000000000000
    4"1/4"Threaded on Both Ends—1/2"ASTM B1610000000000000
     
    Nickel-Chrome-Plated Carbon Steel
     
    1/4"-20
    1/4"5/8"Fully Threaded1/4"——500000000000000
    3/8"5/8"Fully Threaded3/8"——500000000000000
    1/2"5/8"Fully Threaded1/2"——10000000000000
    3/4"5/8"Fully Threaded3/4"——10000000000000
    1"5/8"Fully Threaded1"——10000000000000
     
    3/8"-16
    1/4"3/4"Fully Threaded1/4"——500000000000000
    3/8"3/4"Fully Threaded3/8"——500000000000000
    1/2"3/4"Fully Threaded1/2"——500000000000000
    3/4"3/4"Fully Threaded3/4"——10000000000000
    1"3/4"Fully Threaded1"——10000000000000
    1 1/2"3/4"Threaded on Both Ends—3/4"—100000000000000
    1 3/4"3/4"Threaded on Both Ends—3/4"—100000000000000
     
    1/2"-20
    1/4"1"Fully Threaded1/4"——300000000000000
    3/8"1"Fully Threaded3/8"——300000000000000
    1/2"1"Fully Threaded1/2"——200000000000000
    3/4"1"Fully Threaded3/4"——200000000000000
    1"1"Fully Threaded1"——200000000000000
    2"1"Threaded on Both Ends—1"—100000000000000
    2 1/2"1"Threaded on Both Ends—1"—100000000000000
    3"1"Threaded on Both Ends—1"—100000000000000
     

    Press-Fit Threaded Standoffs

    Image of Product. Front orientation. Contains Annotated. Standoffs. Press-Fit Threaded Standoffs.
    Image of Product. Open End. Front orientation. Open End. Press-Fit Threaded Standoffs.
    Image of Product. Closed End. Front orientation. Closed End. Press-Fit Threaded Standoffs.

    Open End

    Closed End

    Image of Attribute. Fully Threaded. Front orientation. Contains Annotated. Fully Threaded. Press-Fit Threaded Standoffs.
    Image of Attribute. Partially Threaded. Front orientation. Contains Annotated. Partially Threaded. Press-Fit Threaded Standoffs.

    Fully

    Threaded

    Partially

    Threaded

    Create permanent connections without welding, tapping, or installing extra hardware. Press the standoff into an unthreaded hole, then clinch the head using a lever press. The recessed head clinches into sheet metal for a flush, snag-free finish that resists pushing, pulling, and twisting. Also known as captive standoffs.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these standoffs resist rusting. They're strong enough for most jobs, but won't withstand stress as well as steel.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.
    Open End—Create a through hole for two-end mounting or to connect longer screws.
    Closed End—Get a clean, finished look and block oil and moisture from getting inside your assembly.
    Open End
    Closed End
    Lg.
    Hex
    Size
    OD
    For Hole
    Dia.
    For Min.
    Panel Thk.
    Thread
    Lg.
    Threading
    Specs.
    Met
    Min. Thread
    Lg.
    PEM® Part
    No.
    Pkg.
    Qty.
    Pkg.
    Min. Thread
    Lg.
    PEM® Part No.
    Pkg.
    Qty.
    Pkg.
    Corrosion-Resistant 18-8 Stainless Steel
     
    4-40
    1/8"3/16"0.165"0.166"0.04"1/8"Fully ThreadedASTM A380—SOS-440-41000000000000000——————0
    3/16"3/16"0.165"0.166"0.04"3/16"Fully ThreadedASTM A380—SOS-440-6100000000000000——————0
    1/4"3/16"0.165"0.166"0.04"1/4"Fully ThreadedASTM A380—SOS-440-82500000000000000——————0
    5/16"3/16"0.165"0.166"0.04"—Partially ThreadedASTM A380——————05/32"BSOS-440-1025000000000000000
    5/16"3/16"0.165"0.166"0.04"5/16"Fully ThreadedASTM A380—SOS-440-10100000000000000——————0
    3/8"3/16"0.165"0.166"0.04"—Partially ThreadedASTM A3803/16"SOS-440-1225000000000000005/32"BSOS-440-122500000000000000
    7/16"3/16"0.165"0.166"0.04"—Partially ThreadedASTM A3801/4"SOS-440-141000000000000003/16"BSOS-440-14100000000000000
    1/2"3/16"0.165"0.166"0.04"—Partially ThreadedASTM A3805/16"SOS-440-161000000000000001/4"BSOS-440-16100000000000000
    5/8"3/16"0.165"0.166"0.04"—Partially ThreadedASTM A3805/16"SOS-440-2010000000000000001/4"BSOS-440-20100000000000000
    3/4"3/16"0.165"0.166"0.04"—Partially ThreadedASTM A3807/16"SOS-440-2410000000000000003/8"BSOS-440-24100000000000000
    7/8"3/16"0.165"0.166"0.04"—Partially ThreadedASTM A380——————03/8"BSOS-440-281000000000000000
    1"3/16"0.165"0.166"0.04"—Partially ThreadedASTM A380——————03/8"BSOS-440-321000000000000000
     
    6-32
    1/8"1/4"0.212"0.213"0.04"1/8"Fully ThreadedASTM A380—SOS-632-4100000000000000——————0
    3/16"1/4"0.212"0.213"0.04"3/16"Fully ThreadedASTM A380—SOS-632-6100000000000000——————0
    1/4"1/4"0.212"0.213"0.04"1/4"Fully ThreadedASTM A380—SOS-632-82500000000000000——————0
    5/16"1/4"0.212"0.213"0.04"—Partially ThreadedASTM A380——————05/32"BSOS-632-102500000000000000
    5/16"1/4"0.212"0.213"0.04"5/16"Fully ThreadedASTM A380—SOS-632-10100000000000000——————0
    3/8"1/4"0.212"0.213"0.04"—Partially ThreadedASTM A3803/16"SOS-632-1225000000000000005/32"BSOS-632-122500000000000000
    7/16"1/4"0.212"0.213"0.04"—Partially ThreadedASTM A380——————03/16"BSOS-632-14100000000000000
    1/2"1/4"0.212"0.213"0.04"—Partially ThreadedASTM A3805/16"SOS-632-1625000000000000001/4"BSOS-632-162500000000000000
    5/8"1/4"0.212"0.213"0.04"—Partially ThreadedASTM A3805/16"SOS-632-201000000000000001/4"BSOS-632-20100000000000000
    3/4"1/4"0.212"0.213"0.04"—Partially ThreadedASTM A3807/16"SOS-632-2410000000000000003/8"BSOS-632-241000000000000000
    7/8"1/4"0.212"0.213"0.04"—Partially ThreadedASTM A380——————03/8"BSOS-632-281000000000000000
    1"1/4"0.212"0.213"0.04"—Partially ThreadedASTM A380——————03/8"BSOS-632-321000000000000000
     
    8-32
    3/16"5/16"0.28"0.281"0.05"3/16"Fully ThreadedASTM A380—SOS-832-650000000000000——————0
    1/4"5/16"0.28"0.281"0.05"1/4"Fully ThreadedASTM A380—SOS-832-8100000000000000——————0
    5/16"5/16"0.28"0.281"0.05"—Partially ThreadedASTM A380——————05/32"BSOS-832-10100000000000000
    5/16"5/16"0.28"0.281"0.05"5/16"Fully ThreadedASTM A380—SOS-832-1050000000000000——————0
    3/8"5/16"0.28"0.281"0.05"—Partially ThreadedASTM A3803/16"SOS-832-121000000000000005/32"BSOS-832-12100000000000000
    7/16"5/16"0.28"0.281"0.05"—Partially ThreadedASTM A3801/4"SOS-832-14500000000000003/16"BSOS-832-141000000000000000
    1/2"5/16"0.28"0.281"0.05"—Partially ThreadedASTM A3805/16"SOS-832-161000000000000001/4"BSOS-832-161000000000000000
    5/8"5/16"0.28"0.281"0.05"—Partially ThreadedASTM A3805/16"SOS-832-2010000000000000001/4"BSOS-832-201000000000000000
    3/4"5/16"0.28"0.281"0.05"—Partially ThreadedASTM A3807/16"SOS-832-2410000000000000003/8"BSOS-832-241000000000000000
    7/8"5/16"0.28"0.281"0.05"—Partially ThreadedASTM A380——————03/8"BSOS-832-281000000000000000
    1"5/16"0.28"0.281"0.05"—Partially ThreadedASTM A380——————03/8"BSOS-832-321000000000000000
     
    10-32
    5/16"5/16"0.28"0.281"0.05"—Partially ThreadedASTM A380——————05/32"BSOS-032-1050000000000000
    5/16"5/16"0.281"0.281"0.05"5/16"Fully ThreadedASTM A380—SOS-032-1050000000000000——————0
    7/16"5/16"0.28"0.281"0.05"—Partially ThreadedASTM A380——————03/16"BSOS-032-1450000000000000
    1/2"5/16"0.28"0.281"0.05"—Partially ThreadedASTM A380——————01/4"BSOS-032-1650000000000000
    1/2"5/16"0.281"0.281"0.05"—Partially ThreadedASTM A3800.313"SOS-032-1650000000000000——————0
    5/8"5/16"0.28"0.281"0.05"—Partially ThreadedASTM A380——————01/4"BSOS-032-2050000000000000
    3/4"5/16"0.28"0.281"0.05"—Partially ThreadedASTM A380——————03/8"BSOS-032-2410000000000000
    3/4"5/16"0.281"0.281"0.05"—Partially ThreadedASTM A3800.438"SOS-032-2450000000000000——————0
    1"5/16"0.28"0.281"0.05"—Partially ThreadedASTM A380——————03/8"BSOS-032-3210000000000000
     
    M3 × 0.5 mm
    6 mm4.8 mm4.2 mm4.2 mm1 mm—Partially ThreadedASTM A380——————03 mmBSOS-M3-6100000000000000
    6 mm4.8 mm4.2 mm4.2 mm1 mm6 mmFully ThreadedASTM A380—SOS-M3-6100000000000000——————0
    6 mm6.4 mm5.4 mm5.4 mm1 mm—Partially ThreadedASTM A380——————03 mmBSOS-3.5M3-6100000000000000
    6 mm6.4 mm5.4 mm5.4 mm1 mm6 mmFully ThreadedASTM A380—SOS-3.5M3-6100000000000000——————0
    8 mm4.8 mm4.2 mm4.2 mm1 mm—Partially ThreadedASTM A380——————04 mmBSOS-M3-8100000000000000
    8 mm4.8 mm4.2 mm4.2 mm1 mm8 mmFully ThreadedASTM A380—SOS-M3-8100000000000000——————0
    8 mm6.4 mm5.4 mm5.4 mm1 mm—Partially ThreadedASTM A380——————04 mmBSOS-3.5M3-8100000000000000
    8 mm6.4 mm5.4 mm5.4 mm1 mm8 mmFully ThreadedASTM A380—SOS-3.5M3-8100000000000000——————0
    10 mm4.8 mm4.2 mm4.2 mm1 mm—Partially ThreadedASTM A3806 mmSOS-M3-101000000000000004 mmBSOS-M3-10100000000000000
    10 mm6.4 mm5.4 mm5.4 mm1 mm—Partially ThreadedASTM A3806 mmSOS-3.5M3-101000000000000004 mmBSOS-3.5M3-10100000000000000
    12 mm4.8 mm4.2 mm4.2 mm1 mm—Partially ThreadedASTM A3808 mmSOS-M3-121000000000000005 mmBSOS-M3-12100000000000000
    12 mm6.4 mm5.4 mm5.4 mm1 mm—Partially ThreadedASTM A3808 mmSOS-3.5M3-121000000000000005 mmBSOS-3.5M3-12100000000000000
    14 mm4.8 mm4.2 mm4.2 mm1 mm—Partially ThreadedASTM A38010 mmSOS-M3-141000000000000007 mmBSOS-M3-14100000000000000
    14 mm6.4 mm5.4 mm5.4 mm1 mm—Partially ThreadedASTM A38010 mmSOS-3.5M3-141000000000000007 mmBSOS-3.5M3-14100000000000000
    16 mm4.8 mm4.2 mm4.2 mm1 mm—Partially ThreadedASTM A380——————06 mmBSOS-M3-1650000000000000
    20 mm4.8 mm4.2 mm4.2 mm1 mm—Partially ThreadedASTM A380——————09 mmBSOS-M3-2050000000000000
    25 mm4.8 mm4.2 mm4.2 mm1 mm—Partially ThreadedASTM A380——————09 mmBSOS-M3-2550000000000000
     
    M4 × 0.7 mm
    6 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially ThreadedASTM A380——————03 mmBSOS-M4-6100000000000000
    6 mm7.9 mm7.1 mm7.1 mm1.3 mm6 mmFully ThreadedASTM A380—SOS-M4-6100000000000000——————0
    8 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially ThreadedASTM A380——————04 mmBSOS-M4-8100000000000000
    8 mm7.9 mm7.1 mm7.1 mm1.3 mm8 mmFully ThreadedASTM A380—SOS-M4-8100000000000000——————0
    10 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially ThreadedASTM A3806 mmSOS-M4-101000000000000004 mmBSOS-M4-10100000000000000
    12 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially ThreadedASTM A3808 mmSOS-M4-1210000000000000005 mmBSOS-M4-12100000000000000
    14 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially ThreadedASTM A38010 mmSOS-M4-1410000000000000007 mmBSOS-M4-141000000000000000
    16 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially ThreadedASTM A380——————06 mmBSOS-M4-1650000000000000
     
    M5 × 0.8 mm
    8 mm7.9 mm7.1 mm7.1 mm1.3 mm8 mmFully ThreadedASTM A380—SOS-M5-850000000000000——————0
     
    Zinc-Plated Steel
     
    4-40
    1/4"3/16"0.165"0.166"0.04"1/4"Fully Threaded——SO-440-8ZI100000000000000——————0
    5/16"3/16"0.165"0.166"0.04"—Partially Threaded———————05/32"BSO-440-10ZI100000000000000
    5/16"3/16"0.165"0.166"0.04"5/16"Fully Threaded——SO-440-10ZI250000000000000——————0
    3/8"3/16"0.165"0.166"0.04"—Partially Threaded—3/16"SO-440-12ZI1000000000000005/32"BSO-440-12ZI100000000000000
    7/16"3/16"0.165"0.166"0.04"—Partially Threaded———————03/16"BSO-440-14ZI100000000000000
    1/2"3/16"0.165"0.166"0.04"—Partially Threaded—5/16"SO-440-16ZI1000000000000001/4"BSO-440-16ZI100000000000000
    5/8"3/16"0.165"0.166"0.04"—Partially Threaded—5/16"SO-440-20ZI1000000000000001/4"BSO-440-20ZI100000000000000
    3/4"3/16"0.165"0.166"0.04"—Partially Threaded—7/16"SO-440-24ZI1000000000000003/8"BSO-440-24ZI1000000000000000
    7/8"3/16"0.165"0.166"0.04"—Partially Threaded———————03/8"BSO-440-28ZI50000000000000
    1"3/16"0.165"0.166"0.04"—Partially Threaded———————03/8"BSO-440-32ZI1000000000000000
     
    6-32
    1/4"1/4"0.212"0.213"0.04"1/4"Fully Threaded——SO-632-8ZI100000000000000——————0
    5/16"1/4"0.212"0.213"0.04"—Partially Threaded———————05/32"BSO-632-10ZI100000000000000
    5/16"1/4"0.212"0.213"0.04"5/16"Fully Threaded——SO-632-10ZI250000000000000——————0
    3/8"1/4"0.212"0.213"0.04"—Partially Threaded—3/16"SO-632-12ZI1000000000000005/32"BSO-632-12ZI100000000000000
    7/16"1/4"0.212"0.213"0.04"—Partially Threaded———————03/16"BSO-632-14ZI100000000000000
    1/2"1/4"0.212"0.213"0.04"—Partially Threaded—5/16"SO-632-16ZI1000000000000001/4"BSO-632-16ZI100000000000000
    5/8"1/4"0.212"0.213"0.04"—Partially Threaded—5/16"SO-632-20ZI1000000000000001/4"BSO-632-20ZI100000000000000
    3/4"1/4"0.212"0.213"0.04"—Partially Threaded—7/16"SO-632-24ZI1000000000000003/8"BSO-632-24ZI100000000000000
    7/8"1/4"0.212"0.213"0.04"—Partially Threaded———————03/8"BSO-632-28ZI50000000000000
    1"1/4"0.212"0.213"0.04"—Partially Threaded———————03/8"BSO-632-32ZI100000000000000
     
    8-32
    1/4"5/16"0.28"0.281"0.05"1/4"Fully Threaded——SO-832-8ZI100000000000000——————0
    5/16"5/16"0.28"0.281"0.05"—Partially Threaded———————05/32"BSO-832-10ZI100000000000000
    5/16"5/16"0.28"0.281"0.05"5/16"Fully Threaded——SO-832-10ZI100000000000000——————0
    3/8"5/16"0.28"0.281"0.05"—Partially Threaded—3/16"SO-832-12ZI1000000000000005/32"BSO-832-12ZI100000000000000
    7/16"5/16"0.28"0.281"0.05"—Partially Threaded———————00.187"BSO-832-14ZI100000000000000
    1/2"5/16"0.28"0.281"0.05"—Partially Threaded—5/16"SO-832-16ZI1000000000000001/4"BSO-832-16ZI100000000000000
    5/8"5/16"0.28"0.281"0.05"—Partially Threaded—5/16"SO-832-20ZI1000000000000001/4"BSO-832-20ZI100000000000000
    3/4"5/16"0.28"0.281"0.05"—Partially Threaded—7/16"SO-832-24ZI1000000000000003/8"BSO-832-24ZI100000000000000
    7/8"5/16"0.28"0.281"0.05"—Partially Threaded———————03/8"BSO-832-28ZI50000000000000
    1"5/16"0.28"0.281"0.05"—Partially Threaded———————03/8"BSO-832-32ZI1000000000000000
     
    10-32
    5/16"5/16"0.28"0.281"0.05"—Partially Threaded———————05/32"BSO-032-10ZI50000000000000
    5/16"5/16"0.281"0.281"0.05"5/16"Fully Threaded——SO-032-10ZI100000000000000——————0
    3/8"5/16"0.28"0.281"0.05"—Partially Threaded———————05/32"BSO-032-12ZI50000000000000
    3/8"5/16"0.281"0.281"0.05"—Partially Threaded—0.188"SO-032-12ZI100000000000000——————0
    7/16"5/16"0.28"0.281"0.05"—Partially Threaded———————03/16"BSO-032-14ZI50000000000000
    1/2"5/16"0.28"0.281"0.05"—Partially Threaded———————01/4"BSO-032-16ZI50000000000000
    1/2"5/16"0.281"0.281"0.05"—Partially Threaded—0.313"SO-032-16ZI100000000000000——————0
    5/8"5/16"0.28"0.281"0.05"—Partially Threaded———————01/4"BSO-032-20ZI50000000000000
    3/4"5/16"0.28"0.281"0.05"—Partially Threaded———————03/8"BSO-032-24ZI50000000000000
    7/8"5/16"0.28"0.281"0.05"—Partially Threaded———————03/8"BSO-032-28ZI50000000000000
    1"5/16"0.28"0.281"0.05"—Partially Threaded———————03/8"BSO-032-32ZI50000000000000
     
    M3 × 0.5 mm
    6 mm4.8 mm4.2 mm4.2 mm1 mm—Partially Threaded———————03 mmBSO-M3-6ZI100000000000000
    6 mm4.8 mm4.2 mm4.2 mm1 mm6 mmFully Threaded——SO-M3-6ZI100000000000000——————0
    6 mm6.4 mm5.4 mm5.4 mm1 mm—Partially Threaded———————03 mmBSO-3.5M3-6ZI100000000000000
    6 mm6.4 mm5.4 mm5.4 mm1 mm6 mmFully Threaded——SO-3.5M3-6ZI100000000000000——————0
    8 mm4.8 mm4.2 mm4.2 mm1 mm—Partially Threaded———————04 mmBSO-M3-8ZI100000000000000
    8 mm4.8 mm4.2 mm4.2 mm1 mm8 mmFully Threaded——SO-M3-8ZI100000000000000——————0
    8 mm6.4 mm5.4 mm5.4 mm1 mm—Partially Threaded———————04 mmBSO-3.5M3-8ZI100000000000000
    8 mm6.4 mm5.4 mm5.4 mm1 mm8 mmFully Threaded——SO-3.5M3-8ZI100000000000000——————0
    10 mm4.8 mm4.2 mm4.2 mm1 mm—Partially Threaded—6 mmSO-M3-10ZI1000000000000004 mmBSO-M3-10ZI100000000000000
    10 mm6.4 mm5.4 mm5.4 mm1 mm—Partially Threaded—6 mmSO-3.5M3-10ZI1000000000000004 mmBSO-3.5M3-10ZI100000000000000
    12 mm4.8 mm4.2 mm4.2 mm1 mm—Partially Threaded—8 mmSO-M3-12ZI1000000000000005 mmBSO-M3-12ZI100000000000000
    12 mm6.4 mm5.4 mm5.4 mm1 mm—Partially Threaded—8 mmSO-3.5M3-12ZI1000000000000005 mmBSO-3.5M3-12ZI100000000000000
    14 mm4.8 mm4.2 mm4.2 mm1 mm—Partially Threaded—10 mmSO-M3-14ZI1000000000000007 mmBSO-M3-14ZI100000000000000
    14 mm6.4 mm5.4 mm5.4 mm1 mm—Partially Threaded—10 mmSO-3.5M3-14ZI1000000000000007 mmBSO-3.5M3-14ZI100000000000000
    16 mm4.8 mm4.2 mm4.2 mm1 mm—Partially Threaded———————06 mmBSO-M3-16ZI50000000000000
    25 mm4.8 mm4.2 mm4.2 mm1 mm—Partially Threaded———————09 mmBSO-M3-25ZI50000000000000
     
    M4 × 0.7 mm
    6 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially Threaded———————03 mmBSO-M4-6ZI100000000000000
    6 mm7.9 mm7.1 mm7.1 mm1.3 mm6 mmFully Threaded——SO-M4-6ZI100000000000000——————0
    8 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially Threaded———————04 mmBSO-M4-8ZI100000000000000
    8 mm7.9 mm7.1 mm7.1 mm1.3 mm8 mmFully Threaded——SO-M4-8ZI100000000000000——————0
    10 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially Threaded—6 mmSO-M4-10ZI1000000000000004 mmBSO-M4-10ZI100000000000000
    12 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially Threaded—8 mmSO-M4-12ZI1000000000000005 mmBSO-M4-12ZI100000000000000
    14 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially Threaded—10 mmSO-M4-14ZI1000000000000007 mmBSO-M4-14ZI100000000000000
    16 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially Threaded———————06 mmBSO-M4-16ZI50000000000000
    20 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially Threaded—12 mmSO-M4-20ZI500000000000009 mmBSO-M4-20ZI50000000000000
    25 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially Threaded———————09 mmBSO-M4-25ZI50000000000000
     
    M5 × 0.8 mm
    6 mm7.9 mm7.1 mm7.1 mm1.3 mm6 mmFully Threaded——SO-M5-6ZI100000000000000——————0
    8 mm7.9 mm7.1 mm7.1 mm1.3 mm8 mmFully Threaded——SO-M5-8ZI100000000000000——————0
    10 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially Threaded—6 mmSO-M5-10ZI1000000000000004 mmBSO-M5-10ZI50000000000000
    12 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially Threaded———————05 mmBSO-M5-12ZI50000000000000
    14 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially Threaded—10 mmSO-M5-14ZI500000000000006 mmBSO-M5-14ZI50000000000000
    16 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially Threaded———————06 mmBSO-M5-16ZI50000000000000
    20 mm7.9 mm7.1 mm7.1 mm1.3 mm—Partially Threaded———————09 mmBSO-M5-20ZI50000000000000
     

    Electrical-Insulating Female Threaded Standoffs

    Our best electrically insulating standoffs. They prevent electrical currents from passing through enclosures and conductive surfaces. These standoffs are often installed in circuit-breaker housings and semiconductors.
    Round
    Image of Product. Front orientation. Standoffs. Electrical-Insulating Female Threaded Standoffs, Round.
    Image of Attribute. Fully Threaded. Front orientation. Contains Annotated. Fully Threaded. Electrical-Insulating Female Threaded Standoffs, Round.
    Image of Attribute. Threaded on Both Ends. Front orientation. Threaded on Both Ends. Electrical-Insulating Female Threaded Standoffs, Round.

    Fully

    Threaded

    Threaded on

    Both Ends

    High-Temperature Grade L5 Ceramic—Our most heat-resistant standoffs, even at blistering temperatures up to 1700° F. However, ceramic is brittle and can crack under mechanical stress.
    High-Strength Fiberglass-Reinforced Plastic—A lightweight alternative to stainless steel, these have the best strength-to-weight ratio of all our nonmetal standoffs.
    Lg.
    OD
    Threading
    Thread
    Lg.
    Min. Thread
    Lg.
    Dielectric Strength,
    V/mil
    Voltage Rating,
    V
    Temp. Range,
    ° F
    Each
    High-Temperature Grade L5 Ceramic
     
    6-32
    1/4"1/4"Fully Threaded1/4"—275Not Rated50 to 1,70000000000000000
    3/8"3/8"Threaded on Both Ends—1/8"275Not Rated50 to 1,7000000000000000
    1/2"1/4"Threaded on Both Ends—3/16"275Not Rated50 to 1,7000000000000000
    1/2"3/8"Threaded on Both Ends—1/8"275Not Rated50 to 1,7000000000000000
    1/2"1/2"Threaded on Both Ends—5/32"275Not Rated50 to 1,7000000000000000
    3/4"1/4"Threaded on Both Ends—1/4"275Not Rated50 to 1,7000000000000000
    3/4"3/8"Threaded on Both Ends—1/4"275Not Rated50 to 1,7000000000000000
    3/4"1/2"Threaded on Both Ends—1/4"275Not Rated50 to 1,7000000000000000
    1"1/4"Threaded on Both Ends—3/8"275Not Rated50 to 1,7000000000000000
    1"3/8"Threaded on Both Ends—3/8"275Not Rated50 to 1,7000000000000000
    1"1/2"Threaded on Both Ends—3/8"275Not Rated50 to 1,7000000000000000
    1 1/4"1/4"Threaded on Both Ends—3/8"275Not Rated50 to 1,7000000000000000
    1 1/2"1/4"Threaded on Both Ends—3/8"275Not Rated50 to 1,7000000000000000
    1 1/2"3/8"Threaded on Both Ends—3/8"275Not Rated50 to 1,7000000000000000
    1 1/2"1/2"Threaded on Both Ends—9/16"275Not Rated50 to 1,7000000000000000
    2"1/2"Threaded on Both Ends—1/2"275Not Rated50 to 1,7000000000000000
    2 1/2"1/2"Threaded on Both Ends—1/2"275Not Rated50 to 1,7000000000000000
    3"1/2"Threaded on Both Ends—3/8"275Not Rated50 to 1,70000000000000000
     
    8-32
    1/2"3/8"Threaded on Both Ends—5/32"275Not Rated50 to 1,7000000000000000
    3/4"3/8"Threaded on Both Ends—3/16"275Not Rated50 to 1,7000000000000000
    1"3/8"Threaded on Both Ends—3/8"275Not Rated50 to 1,7000000000000000
    1 1/2"3/8"Threaded on Both Ends—3/8"275Not Rated50 to 1,7000000000000000
     
    1/4"-20
    1"3/4"Threaded on Both Ends—3/8"275Not Rated50 to 1,7000000000000000
    1"1"Threaded on Both Ends—3/8"275Not Rated50 to 1,70000000000000000
    1 1/2"3/4"Threaded on Both Ends—3/8"275Not Rated50 to 1,7000000000000000
    1 1/2"1"Threaded on Both Ends—1/2"275Not Rated50 to 1,70000000000000000
    1 1/2"1 1/4"Threaded on Both Ends—5/8"275Not Rated50 to 1,70000000000000000
    2"3/4"Threaded on Both Ends—3/4"275Not Rated50 to 1,7000000000000000
    2"1"Threaded on Both Ends—5/8"275Not Rated50 to 1,70000000000000000
    2"1 1/4"Threaded on Both Ends—5/8"275Not Rated50 to 1,70000000000000000
    2 1/2"3/4"Threaded on Both Ends—3/4"275Not Rated50 to 1,70000000000000000
    3"3/4"Threaded on Both Ends—3/4"275Not Rated50 to 1,70000000000000000
    3"1"Threaded on Both Ends—5/8"275Not Rated50 to 1,70000000000000000
    3"1 1/4"Threaded on Both Ends—5/8"275Not Rated50 to 1,70000000000000000
    3 1/2"3/4"Threaded on Both Ends—3/4"275Not Rated50 to 1,70000000000000000
    4"3/4"Threaded on Both Ends—3/4"275Not Rated50 to 1,70000000000000000
    4"1"Threaded on Both Ends—5/8"275Not Rated50 to 1,70000000000000000
    4"1 1/4"Threaded on Both Ends—5/8"275Not Rated50 to 1,70000000000000000
    5"1 1/4"Threaded on Both Ends—5/8"275Not Rated50 to 1,70000000000000000
     
    High-Strength Fiberglass-Reinforced Plastic
     
    3/8"-16
    1 3/8"1 3/4"Threaded on Both Ends—3/8"3501,500—0000000000
    1 3/4"2"Threaded on Both Ends—3/8"3502,000-40 to 26600000000000
    2"2"Threaded on Both Ends—9/16"3502,300-40 to 2660000000000
    2 1/4"1 3/4"Threaded on Both Ends—9/16"3502,700—0000000000
     

    Miniature Splined Press-Fit Threaded Standoffs

    Image of Product. Front orientation. Standoffs. Miniature Splined Press-Fit Threaded Standoffs.
    Image of Attribute. Front orientation. Contains Annotated. Standoffs. Miniature Splined Press-Fit Threaded Standoffs.
    Image of Attribute. Fully Threaded. Front orientation. Contains Annotated. Standoffs. Miniature Splined Press-Fit Threaded Standoffs.

    Fully

    Threaded

    The smallest standoffs we offer. These press into unthreaded holes to create permanent connections without welding, tapping, or installing extra hardware. The raised splines prevent rotation, and a recessed head clinches material for a strong hold. A through hole allows installation from one side, making them ideal for compact electronics like laptops and handheld devices.
    Wear-Resistant 400 Series Stainless Steel—These standoffs can grind against metal surfaces without denting or scratching. More corrosion resistant than steel.
    Lg.
    OD
    Threading
    Thread
    Lg.
    For Hole
    Dia.
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Wear-Resistant 400 Series Stainless Steel
     
    0-80
    3/32"0.094"Fully Threaded3/32"0.095"ASTM A3802500000000000000
    1/8"0.094"Fully Threaded1/8"0.095"ASTM A380250000000000000
     
    2-56
    3/32"0.124"Fully Threaded3/32"0.125"ASTM A380250000000000000
    1/8"0.124"Fully Threaded1/8"0.125"ASTM A380250000000000000
     
    M1 × 0.25 mm
    2 mm2.4 mmFully Threaded2 mm2.4 mmASTM A3802500000000000000
    3 mm2.4 mmFully Threaded3 mm2.4 mmASTM A3802500000000000000
     
    M1.2 × 0.25 mm
    2 mm2.4 mmFully Threaded2 mm2.4 mmASTM A380100000000000000
    3 mm2.4 mmFully Threaded3 mm2.4 mmASTM A380100000000000000
     
    M1.4 × 0.3 mm
    2 mm2.4 mmFully Threaded2 mm2.4 mmASTM A380100000000000000
    3 mm2.4 mmFully Threaded3 mm2.4 mmASTM A380100000000000000
     
    M1.6 × 0.35 mm
    2 mm2.4 mmFully Threaded2 mm2.4 mmASTM A380250000000000000
    3 mm2.4 mmFully Threaded3 mm2.4 mmASTM A380250000000000000
     
    M2 × 0.4 mm
    2 mm3.2 mmFully Threaded2 mm3.2 mmASTM A380250000000000000
    3 mm3.2 mmFully Threaded3 mm3.2 mmASTM A380250000000000000
     

    Female Threaded Round Plastic Standoffs

    Image of Product. Front orientation. Standoffs. Female Threaded Round Plastic Standoffs.
    Image of Attribute. Fully Threaded. Front orientation. Contains Annotated. Fully Threaded. Female Threaded Round Plastic Standoffs.
    Image of Attribute. Threaded on Both Ends. Front orientation. Threaded on Both Ends. Female Threaded Round Plastic Standoffs.

    Fully

    Threaded

    Threaded on

    Both Ends

    Lightweight, nonconductive, and naturally rust-resistant. Screw these standoffs onto male-threaded panels and equipment covers to separate, position and connect other male components.
    Nylon 6/6—Lightweight and stand up to daily wear and tear. Nylon swells and weakens when exposed to moisture, so these standoffs are best for dry environments.
    Each
    Lg.
    OD
    Threading
    Thread
    Lg.
    Min. Thread
    Lg.
    Temp. Range,
    ° F
    Flammability
    Rating
    Specs.
    Met
    1-99
    100-499
    500-Up
    Nylon 6/6
     
    0-80
    1/4"1/8"Fully Threaded1/4"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000000
    5/16"1/8"Fully Threaded5/16"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3/8"1/8"Fully Threaded3/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1/2"1/8"Threaded on Both Ends—3/16"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
     
    2-56
    1/4"1/8"Fully Threaded1/4"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    5/16"1/8"Fully Threaded5/16"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3/8"1/8"Fully Threaded3/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1/2"1/8"Fully Threaded1/2"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
     
    4-40
    1/8"1/4"Fully Threaded1/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    5/32"1/4"Fully Threaded5/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3/16"1/4"Fully Threaded3/16"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    7/32"1/4"Fully Threaded7/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1/4"1/4"Fully Threaded1/4"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    9/32"1/4"Fully Threaded9/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    5/16"1/4"Fully Threaded5/16"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    11/32"1/4"Fully Threaded11/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3/8"1/4"Fully Threaded3/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    13/32"1/4"Fully Threaded13/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    7/16"1/4"Fully Threaded7/16"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    15/32"1/4"Fully Threaded15/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1/2"1/4"Fully Threaded1/2"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    5/8"1/4"Fully Threaded5/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3/4"1/4"Fully Threaded3/4"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    7/8"1/4"Fully Threaded7/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1"1/4"Fully Threaded1"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1 1/4"1/4"Threaded on Both Ends—1/4"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1 1/2"1/4"Threaded on Both Ends—1/4"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    2"1/4"Threaded on Both Ends—1/4"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    2 1/2"1/4"Threaded on Both Ends—1/4"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3"1/4"Threaded on Both Ends—1/4"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3 1/2"1/4"Threaded on Both Ends—1/4"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    4"1/4"Threaded on Both Ends—1/4"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
     
    6-32
    1/8"1/4"Fully Threaded1/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    5/32"1/4"Fully Threaded5/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3/16"1/4"Fully Threaded3/16"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    7/32"1/4"Fully Threaded7/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1/4"1/4"Fully Threaded1/4"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    9/32"1/4"Fully Threaded9/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    5/16"1/4"Fully Threaded5/16"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    11/32"1/4"Fully Threaded11/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3/8"1/4"Fully Threaded3/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    13/32"1/4"Fully Threaded13/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    7/16"1/4"Fully Threaded7/16"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    15/32"1/4"Fully Threaded15/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1/2"1/4"Fully Threaded1/2"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    5/8"1/4"Fully Threaded5/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3/4"1/4"Fully Threaded3/4"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    7/8"1/4"Fully Threaded7/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1"1/4"Fully Threaded1"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1 1/4"1/4"Threaded on Both Ends—3/8"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1 1/2"1/4"Threaded on Both Ends—3/8"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    2"1/4"Threaded on Both Ends—3/8"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    2 1/2"1/4"Threaded on Both Ends—3/8"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3"1/4"Threaded on Both Ends—3/8"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3 1/2"1/4"Threaded on Both Ends—3/8"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    4"1/4"Threaded on Both Ends—3/8"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
     
    8-32
    1/8"1/4"Fully Threaded1/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    5/32"1/4"Fully Threaded5/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3/16"1/4"Fully Threaded3/16"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    7/32"1/4"Fully Threaded7/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1/4"1/4"Fully Threaded1/4"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    9/32"1/4"Fully Threaded9/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    5/16"1/4"Fully Threaded5/16"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    11/32"1/4"Fully Threaded11/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3/8"1/4"Fully Threaded3/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    13/32"1/4"Fully Threaded13/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    7/16"1/4"Fully Threaded7/16"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    15/32"1/4"Fully Threaded15/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1/2"1/4"Fully Threaded1/2"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    5/8"1/4"Fully Threaded5/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3/4"1/4"Fully Threaded3/4"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    7/8"1/4"Fully Threaded7/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1"1/4"Fully Threaded1"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1 1/4"1/4"Threaded on Both Ends—7/16"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1 1/2"1/4"Threaded on Both Ends—7/16"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    2"1/4"Threaded on Both Ends—7/16"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    2 1/2"1/4"Threaded on Both Ends—7/16"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3"1/4"Threaded on Both Ends—7/16"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3 1/2"1/4"Threaded on Both Ends—7/16"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    4"1/4"Threaded on Both Ends—7/16"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
     
    10-32
    1/8"1/4"Fully Threaded1/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    5/32"1/4"Fully Threaded5/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3/16"1/4"Fully Threaded3/16"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    7/32"1/4"Fully Threaded7/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1/4"1/4"Fully Threaded1/4"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    9/32"1/4"Fully Threaded9/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    5/16"1/4"Fully Threaded5/16"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    11/32"1/4"Fully Threaded11/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3/8"1/4"Fully Threaded3/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    13/32"1/4"Fully Threaded13/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    7/16"1/4"Fully Threaded7/16"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    15/32"1/4"Fully Threaded15/32"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1/2"1/4"Fully Threaded1/2"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    5/8"1/4"Fully Threaded5/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3/4"1/4"Fully Threaded3/4"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    7/8"1/4"Fully Threaded7/8"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1"1/4"Fully Threaded1"—-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1 1/4"1/4"Threaded on Both Ends—1/2"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    1 1/2"1/4"Threaded on Both Ends—1/2"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    2"1/4"Threaded on Both Ends—1/2"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    2 1/2"1/4"Threaded on Both Ends—1/2"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3"1/4"Threaded on Both Ends—1/2"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    3 1/2"1/4"Threaded on Both Ends—1/2"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
    4"1/4"Threaded on Both Ends—1/2"-20 to 155UL 94 V-2
    		ASTM D4066000000000000000000000
     

    Sanitary Female Threaded Standoffs

    Image of Product. Front orientation. Standoffs. Sanitary Female Threaded Standoffs.
    Image of Product. Back orientation. Standoffs. Sanitary Female Threaded Standoffs.
    Image of Attribute. Fully Threaded. Front orientation. Contains Annotated. Standoffs. Sanitary Female Threaded Standoffs.

    Fully

    Threaded

    Mount male-threaded components onto food processing lines, walls, and sanitary equipment, while leaving space to clean in between. The smooth finish and rounded edges eliminate pits or crevices where bacteria could grow. These standoffs stand up to hard cleaners and detergents and won't corrode from frequent washdowns. A rubber seal stops water and contaminants from entering the body of these standoffs. They are FDA compliant for safe contact with food.
    304 Stainless Steel—Resist corrosion in environments exposed to moisture, chemicals, or frequent cleaning.
    Buna-N Seal—The best oil resistance of any rubber seal we offer. These won't swell or soften when they touch oil, grease, or fuel. However, they break down if exposed to synthetic lubricants.
    Silicone Rubber Seal—Withstand the widest temperature range of any rubber seal we offer. These standoffs resist detergents but break down when exposed to oil, grease, and fuel.
    Lg.
    OD
    Threading
    Thread
    Lg.
    Temp. Range,
    ° F
    Seal Material
    Food Industry Std.
    Each
    304 Stainless Steel
     
    1/4"-20
    1"1"Fully Threaded1"-20 to 220Buna-N
    		FDA Compliant 21 CFR 177.2600
    		000000000000000
    1"1 3/16"Fully Threaded1"-75 to 390Silicone Rubber
    		FDA Compliant 21 CFR 177.2600
    		00000000000000
    2"1 3/16"Fully Threaded2"-75 to 390Silicone Rubber
    		FDA Compliant 21 CFR 177.2600
    		00000000000000
     
    5/16"-18
    1"1"Fully Threaded1"-20 to 220Buna-N
    		FDA Compliant 21 CFR 177.2600
    		00000000000000
     
    3/8"-16
    1"1"Fully Threaded1"-20 to 220Buna-N
    		FDA Compliant 21 CFR 177.2600
    		00000000000000
    1"1 3/16"Fully Threaded1"-75 to 390Silicone Rubber
    		FDA Compliant 21 CFR 177.2600
    		00000000000000
    2"1 3/16"Fully Threaded2"-75 to 390Silicone Rubber
    		FDA Compliant 21 CFR 177.2600
    		00000000000000
     
    1/2"-13
    1"1"Fully Threaded1"-20 to 220Buna-N
    		FDA Compliant 21 CFR 177.2600
    		00000000000000
     
    M6 × 1 mm
    25 mm25.4 mmFully Threaded25 mm-20 to 220Buna-N
    		FDA Compliant 21 CFR 177.2600
    		00000000000000
     
    M8 × 1.25 mm
    25 mm25.4 mmFully Threaded25 mm-20 to 220Buna-N
    		FDA Compliant 21 CFR 177.2600
    		00000000000000
     
    M10 × 1.5 mm
    25 mm25.4 mmFully Threaded25 mm-20 to 220Buna-N
    		FDA Compliant 21 CFR 177.2600
    		00000000000000
     
    M12 × 1.75 mm
    25 mm25.4 mmFully Threaded25 mm-20 to 220Buna-N
    		FDA Compliant 21 CFR 177.2600
    		00000000000000
     

    High-Precision Female Round Standoffs

    Image of Product. Front orientation. Standoffs. High-Precision Female Round Standoffs.
    Image of Attribute. Fully Threaded. Front orientation. Contains Annotated. Fully Threaded. High-Precision Female Round Standoffs.

    Fully

    Threaded

    Image of Attribute. Threaded on Both Ends. Front orientation. Threaded on Both Ends. High-Precision Female Round Standoffs.

    Threaded on

    Both Ends

    Create exact spacing between male-threaded components in tight-tolerance assemblies, such as laser systems and optical equipment. If you need extra leverage during tightening, you can insert a rod into the through hole. Also known as pillar posts.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these standoffs resist rusting. They're strong enough for most jobs, but won't withstand stress as well as steel.
    Lg.
    OD
    Threading
    Thread
    Lg.
    Min. Thread
    Lg.
    Through-Hole
    Dia.
    Each
    Corrosion-Resistant 18-8 Stainless Steel
     
    1/4"-20
    1/2"1"Fully Threaded1/2"—3/16"000000000000000
    3/4"1"Fully Threaded3/4"—3/16"00000000000000
    1"1"Threaded on Both Ends—3/8"3/16"00000000000000
    1 1/2"1"Threaded on Both Ends—3/8"3/16"00000000000000
    3"1"Threaded on Both Ends—3/8"3/16"00000000000000
    4"1"Threaded on Both Ends—3/8"3/16"00000000000000
    6"1"Threaded on Both Ends—3/8"3/16"00000000000000
    12"1"Threaded on Both Ends—3/8"3/16"00000000000000
     

    Magnetic Female Round Standoffs

    Image of Product. Front orientation. Standoffs. Magnetic Female Round Standoffs.
    Image of Product. Front orientation. Standoffs. Magnetic Female Round Standoffs.
    Image of Attribute. Partially Threaded. Front orientation. Contains Annotated. Standoffs. Magnetic Female Round Standoffs.

    Partially

    Threaded

    Mount or reposition male-threaded parts instantly—these magnetic-backed standoffs snap onto metal surfaces. Install on displays, test rigs, and tight spaces where permanent mounting isn't practical.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.
    Brass—Resist corrosion in wet environments. Brass is softer and less likely to dent surfaces than steel. Don't mount brass standoffs directly to steel, or they'll create a short circuit that reduces magnetism up to 15%.
    Alnico Magnet—Retain their magnetic strength, even when exposed to high temperatures.
    Neodymium Magnet—Our strongest magnets. These support heavy connections, but have lower heat resistance than Alnico magnets.
    Lg.,
    mm
    OD,
    mm
    Threading
    Min. Thread
    Lg., mm
    Max. Pull,
    lbf
    Magnet
    Material
    Min. Mounting Distance
    from Steel, mm
    Max. Temp.,
    ° F
    Each
    Zinc-Plated Steel
     
    M3 × 0.5 mm
    206Partially Threaded50.4Alnico—840000000000000000
    206Partially Threaded51.3Neodymium—1750000000000000
    208Partially Threaded50.8Alnico—84000000000000000
    208Partially Threaded52.6Neodymium—1750000000000000
     
    M4 × 0.7 mm
    2010Partially Threaded71.9Alnico—84000000000000000
    2010Partially Threaded75.3Neodymium—1750000000000000
    2013Partially Threaded72.6Alnico—84000000000000000
    2013Partially Threaded713Neodymium—1750000000000000
    2016Partially Threaded54.4Alnico—84000000000000000
    2016Partially Threaded520Neodymium—1750000000000000
     
    M6 × 1 mm
    2520Partially Threaded78.9Alnico—84000000000000000
    2520Partially Threaded730Neodymium—17500000000000000
     
    Brass
     
    M3 × 0.5 mm
    206Partially Threaded52.2Neodymium1.51750000000000000
    208Partially Threaded55.6Neodymium1.51750000000000000
     
    M4 × 0.7 mm
    2010Partially Threaded710Neodymium217500000000000000
    2013Partially Threaded715Neodymium2.517500000000000000
    2516Partially Threaded833Neodymium317500000000000000
     
    M6 × 1 mm
    2520Partially Threaded662Neodymium417500000000000000
     

    Splined Press-Fit Threaded Standoffs

    Image of Product. Front orientation. Contains Annotated. Standoffs. Splined Press-Fit Threaded Standoffs.
    Image of Attribute. Front orientation. ZoomedIn view. Contains Border. Standoffs. Splined Press-Fit Threaded Standoffs.
    Image of Attribute. Fully Threaded. Front orientation. Contains Annotated. Fully Threaded. Splined Press-Fit Threaded Standoffs.
    Image of Attribute. Partially Threaded. Front orientation. Contains Annotated. Partially Threaded. Splined Press-Fit Threaded Standoffs.

    Fully

    Threaded

    Partially

    Threaded

    Create a secure, permanent hold on sheet metal panels. They're often used to mount access covers and shields onto enclosures. Splines bite into the panels so standoffs don't rotate. Also known as captive standoffs.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these standoffs resist rusting. They're strong enough for most jobs, but won't withstand stress as well as steel.
    Lg.
    OD
    For Hole
    Dia.
    For Min.
    Panel Thk.
    Threading
    Thread
    Lg.
    Min. Thread
    Lg.
    PEM® Part
    No.
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Corrosion-Resistant 18-8 Stainless Steel
     
    4-40
    1/4"0.219"0.166"0.06"Fully Threaded1/4"—KFSE-440-8ASTM A58225000000000000000
     
    6-32
    1/4"0.281"0.213"0.06"Fully Threaded1/4"—KFSE-632-8ASTM A5822500000000000000
    3/8"0.281"0.213"0.06"Fully Threaded3/8"—KFSE-632-12ASTM A5821000000000000000
    1/2"0.281"0.213"0.06"Partially Threaded—3/8"KFSE-632-16ASTM A5821000000000000000
     

    Hinged Female Threaded Round Standoffs

    Image of Product. Front orientation. Standoffs. Hinged Female Threaded Round Standoffs.
    Image of Attribute. Front orientation. Contains Annotated. Standoffs. Hinged Female Threaded Round Standoffs.
    Pivot up to 180° so you can swing male-threaded panels open to access components without taking anything apart.
    Zinc-Plated Brass—Typically chosen for their warm, polished look, these standoffs are suitable for outdoor, low-stress applications. The zinc plating resists corrosion, but brass is softer than other metals, so these standoffs may deform under high stress.
    Lg.
    Min.
    Thread Lg.
    OD
    (A)
    (B)
    Threading
    (C)
    (D)
    Specs.
    Met
    Each
    Zinc-Plated Brass
     
    4-40
    3/16"3/8"3/8"Threaded on Both Ends5/32"5/32"ASTM B1600000000000000
    3/16"7/16"5/8"Threaded on Both Ends7/32"1/4"ASTM B160000000000000
     
    6-32
    1/4"3/8"3/8"Threaded on Both Ends3/32"3/32"ASTM B160000000000000
    1/4"5/8"5/8"Threaded on Both Ends11/32"11/32"ASTM B160000000000000
     
    8-32
    1/4"3/8"5/8"Threaded on Both Ends3/32"11/32"ASTM B160000000000000
    1/4"5/8"5/8"Threaded on Both Ends11/32"11/32"ASTM B160000000000000
     

    Crimp-On Threaded Round Standoffs

    Image of System. Front orientation. Contains Annotated. Standoffs. Crimp-On Threaded Round Standoffs.
    Image of Product. Front orientation. Contains Annotated. Standoffs. Crimp-On Threaded Round Standoffs.
    Image of Attribute. Fully Threaded. Front orientation. Contains Annotated. Standoffs. Crimp-On Threaded Round Standoffs.

    Fully

    Threaded

    Permanently mount components to thin sheets. Crimp these standoffs into panels with a punch and anvil for a flush, mechanical bond. Unlike press-fit standoffs, installing these deforms the panel, which ensures a secure hold that won't loosen over time. Also known as swage standoffs.
    Zinc-Plated Brass—Typically chosen for their warm, polished look, these standoffs are suitable for outdoor, low-stress applications. The zinc plating resists corrosion, but brass is softer than other metals, so these standoffs may deform under high stress.
    Crimp
    End
    Lg.
    OD
    Threading
    Thread
    Lg.
    Lg.
    OD
    For Hole
    Dia.
    For Panel
    Thk.
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Brass
     
    4-40
    1/8"1/4"Fully Threaded1/8"0.105"0.188"0.188"1/16"ASTM B1625000000000000000
    3/16"1/4"Fully Threaded3/16"0.105"0.188"0.188"1/16"ASTM B162500000000000000
    1/4"1/4"Fully Threaded1/4"0.105"0.188"0.188"1/16"ASTM B16100000000000000
    1/4"1/4"Fully Threaded1/4"0.135"0.188"0.188"3/32"ASTM B16100000000000000
    3/8"1/4"Fully Threaded3/8"0.105"0.188"0.188"1/16"ASTM B16100000000000000
    1/2"1/4"Fully Threaded1/2"0.105"0.188"0.188"1/16"ASTM B161000000000000000
     
    6-32
    1/8"1/4"Fully Threaded1/8"0.105"0.188"0.188"1/16"ASTM B162500000000000000
    3/16"1/4"Fully Threaded3/16"0.105"0.188"0.188"1/16"ASTM B162500000000000000
    1/4"1/4"Fully Threaded1/4"0.105"0.188"0.188"1/16"ASTM B16100000000000000
    1/4"1/4"Fully Threaded1/4"0.135"0.188"0.188"3/32"ASTM B16100000000000000
    3/8"1/4"Fully Threaded3/8"0.105"0.188"0.188"1/16"ASTM B16100000000000000
    1/2"1/4"Fully Threaded1/2"0.105"0.188"0.188"1/16"ASTM B161000000000000000
     
    Accessories for Standoffs
    Standoff Anvils
    Image of Product. Front orientation. Standoff Anvils.
    For Standoff
    Lg.
    Each
    Brass
     
    1/2"-24 Threads
    1/8", 3/16"000000000000000
    1/4", 3/8"00000000000000
    1/2"00000000000000
     
    Standoff Punches
    Image of Product. Front orientation. Standoff Punches.
    For Standoff
    Lg.
    OD
    Each
    Brass
    1/8", 3/16"1/4"000000000000000
    1/4", 3/8"1/4"00000000000000
    1/2"1/4"00000000000000
     
    back to top