OD OD |
|---|
ID ID |
|---|
Wall Thickness Wall Thickness |
|---|
|
|
|
Material Material |
|---|
|
Performance Properties Performance Properties |
|---|
|
Flexural Strength Flexural Strength |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
Compressive Strength Compressive Strength |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Impact Strength Impact Strength |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Density Density |
|---|
|
Fiber Tensile Stiffness Fiber Tensile Stiffness |
|---|
|
About Composites
More
Ultra-Strength Lightweight Carbon Fiber Round Tubes
Often used in place of aluminum for structural frames, machinery components, and robotics, these tubes are lighter in weight and almost as rigid. Carbon fiber is known for its use in the aerospace industry where a balance of weight and strength is vital. Thanks to these tubes being lightweight, they reduce wear and stress on motorized parts to extend the life of machinery.
Plain matte tubes have fibers that run in one direction, making them strong in the direction of the fibers. They resist bending across the fibers but will splinter and separate like string cheese when bent along the length of the fiber. Plain glossy tubes and checked tubes have layers with fibers that alternate in two directions, so they resist bending and crushing across the entire tube. They have more structural integrity compared to plain matte tubes.
Checked carbon fiber has the classic carbon-fiber look and is easy to machine—it won’t fray or splinter when cut. Glossy carbon fiber has a shiny finish that can be sanded to matte. Matte carbon fiber is ready to paint and won’t reflect light, making it ideal for photography applications.
For technical drawings and 3-D models, click on a part number.
- Color: Black
- Max. Temperature: 180° F
- Tensile Strength: 120,000-175,000 psi (Excellent)
- Fiber Tensile Stiffness: Standard (33-36 msi)
- Impact Strength: Not Rated
- Hardness: Not Rated
- For Use Outdoors: No
| OD | OD Tolerance | ID | ID Tolerance | Construction Layup | Each | |
12" Lg. | ||||||
|---|---|---|---|---|---|---|
Glossy Tubes (Unidirectional Weave) | ||||||
0.055" Wall Thickness -0.005"; 0.005" | ||||||
| 0.36" | -0.008" to 0.008" | 1/4" | -0.003" to 0.003" | 0°/90° | 00000000 | 000000 |
| 0.485" | -0.008" to 0.008" | 3/8" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 0.61" | -0.008" to 0.008" | 1/2" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 0.735" | -0.008" to 0.008" | 5/8" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 0.86" | -0.008" to 0.008" | 3/4" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 1.11" | -0.008" to 0.008" | 1" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 1.36" | -0.008" to 0.008" | 1 1/4" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 1.61" | -0.01" to 0.01" | 1 1/2" | -0.005" to 0.005" | 0°/90° | 00000000 | 00000 |
| 1.86" | -0.01" to 0.01" | 1 3/4" | -0.005" to 0.005" | 0°/90° | 00000000 | 00000 |
| 2.11" | -0.01" to 0.01" | 2" | -0.005" to 0.005" | 0°/90° | 00000000 | 00000 |
Matte Tubes (Unidirectional Weave) | ||||||
0.01" Wall Thickness | ||||||
| 0.039" | -0.006" to 0.006" | 0.02" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
0.02" Wall Thickness | ||||||
| 0.078" | -0.006" to 0.006" | 0.039" | -0.006" to 0.006" | 0° | 00000000 | 0000 |
| 0.118" | -0.006" to 0.006" | 0.079" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
| 0.236" | -0.006" to 0.006" | 0.196" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
0.04" Wall Thickness | ||||||
| 0.197" | -0.006" to 0.006" | 0.118" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
| 0.314" | -0.006" to 0.006" | 0.236" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
| 0.393" | -0.006" to 0.006" | 0.314" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
0.041" Wall Thickness | ||||||
| 0.472" | -0.006" to 0.006" | 0.39" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
36" Lg. | ||||||
Glossy Tubes (Unidirectional Weave) | ||||||
0.055" Wall Thickness -0.005"; 0.005" | ||||||
| 0.36" | -0.008" to 0.008" | 1/4" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 0.485" | -0.008" to 0.008" | 3/8" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 0.61" | -0.008" to 0.008" | 1/2" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 0.735" | -0.008" to 0.008" | 5/8" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 0.86" | -0.008" to 0.008" | 3/4" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 1.11" | -0.008" to 0.008" | 1" | -0.003" to 0.003" | 0°/90° | 00000000 | 000000 |
| 1.36" | -0.008" to 0.008" | 1 1/4" | -0.003" to 0.003" | 0°/90° | 00000000 | 000000 |
| 1.61" | -0.01" to 0.01" | 1 1/2" | -0.005" to 0.005" | 0°/90° | 00000000 | 000000 |
| 1.86" | -0.01" to 0.01" | 1 3/4" | -0.005" to 0.005" | 0°/90° | 00000000 | 000000 |
| 2.11" | -0.01" to 0.01" | 2" | -0.005" to 0.005" | 0°/90° | 00000000 | 000000 |
39" Lg. | ||||||
Matte Tubes (Unidirectional Weave) | ||||||
0.01" Wall Thickness | ||||||
| 0.039" | -0.006" to 0.006" | 0.02" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
0.02" Wall Thickness | ||||||
| 0.078" | -0.006" to 0.006" | 0.039" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
| 0.118" | -0.006" to 0.006" | 0.079" | -0.006" to 0.006" | 0° | 0000000 | 00000 |
| 0.236" | -0.006" to 0.006" | 0.196" | -0.006" to 0.006" | 0° | 0000000 | 00000 |
0.04" Wall Thickness | ||||||
| 0.197" | -0.006" to 0.006" | 0.118" | -0.006" to 0.006" | 0° | 0000000 | 00000 |
| 0.314" | -0.006" to 0.006" | 0.236" | -0.006" to 0.006" | 0° | 0000000 | 00000 |
| 0.393" | -0.006" to 0.006" | 0.314" | -0.006" to 0.006" | 0° | 0000000 | 00000 |
0.041" Wall Thickness | ||||||
| 0.472" | -0.006" to 0.006" | 0.39" | -0.006" to 0.006" | 0° | 0000000 | 00000 |
72" Lg. | ||||||
Glossy Tubes (Unidirectional Weave) | ||||||
0.055" Wall Thickness -0.005"; 0.005" | ||||||
| 0.36" | -0.008" to 0.008" | 1/4" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 0.485" | -0.008" to 0.008" | 3/8" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 0.61" | -0.008" to 0.008" | 1/2" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 0.735" | -0.008" to 0.008" | 5/8" | -0.003" to 0.003" | 0°/90° | 00000000 | 00000 |
| 0.86" | -0.008" to 0.008" | 3/4" | -0.003" to 0.003" | 0°/90° | 00000000 | 000000 |
| 1.11" | -0.008" to 0.008" | 1" | -0.003" to 0.003" | 0°/90° | 00000000 | 000000 |
| 1.36" | -0.008" to 0.008" | 1 1/4" | -0.003" to 0.003" | 0°/90° | 00000000 | 000000 |
| 1.61" | -0.01" to 0.01" | 1 1/2" | -0.005" to 0.005" | 0°/90° | 00000000 | 000000 |
| 1.86" | -0.01" to 0.01" | 1 3/4" | -0.005" to 0.005" | 0°/90° | 00000000 | 000000 |
| 2.11" | -0.01" to 0.01" | 2" | -0.005" to 0.005" | 0°/90° | 00000000 | 000000 |
Matte Tubes (Unidirectional Weave) | ||||||
0.01" Wall Thickness | ||||||
| 0.039" | -0.006" to 0.006" | 0.02" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
0.02" Wall Thickness | ||||||
| 0.078" | -0.006" to 0.006" | 0.039" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
| 0.118" | -0.006" to 0.006" | 0.079" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
| 0.236" | -0.006" to 0.006" | 0.196" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
0.04" Wall Thickness | ||||||
| 0.197" | -0.006" to 0.006" | 0.118" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
| 0.314" | -0.006" to 0.006" | 0.236" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
| 0.393" | -0.006" to 0.006" | 0.314" | -0.006" to 0.006" | 0° | 00000000 | 00000 |
0.041" Wall Thickness | ||||||
| 0.472" | -0.006" to 0.006" | 0.39" | -0.006" to 0.006" | 0° | 00000000 | 000000 |
- Color: Black
- Max. Temperature: See table
- Tensile Strength: 120,000-175,000 psi (Excellent)
- Fiber Tensile Stiffness: Standard (33-36 msi)
- Impact Strength: Not Rated
- Hardness: Not Rated
- For Use Outdoors: No
| OD | OD Tolerance | ID | ID Tolerance | Max. Temp., °F | Construction Layup | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
Glossy Tubes (Twill Weave) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
0.035" Wall Thickness (-0.005" to 0.005") | |||||||||
| 0.32" | -0.008" to 0.008" | 1/4" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
| 0.383" | -0.008" to 0.008" | 5/16" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
| 0.445" | -0.008" to 0.008" | 3/8" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
| 0.57" | -0.008" to 0.008" | 1/2" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
| 0.695" | -0.008" to 0.008" | 5/8" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
| 0.82" | -0.008" to 0.008" | 3/4" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
| 1.07" | -0.008" to 0.008" | 1" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
0.064" Wall Thickness (-0.005" to 0.005") | |||||||||
| 0.378" | -0.008" to 0.008" | 1/4" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
| 0.503" | -0.008" to 0.008" | 3/8" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
| 0.628" | -0.008" to 0.008" | 1/2" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
| 0.878" | -0.008" to 0.008" | 3/4" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
| 1.128" | -0.008" to 0.008" | 1" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
| 1.378" | -0.008" to 0.008" | 1 1/4" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
| 1.628" | -0.01" to 0.01" | 1 1/2" | -0.005" to 0.005" | 180° | 0°/90° | 0000000 | |||
| 1.878" | -0.01" to 0.01" | 1 3/4" | -0.005" to 0.005" | 180° | 0°/90° | 0000000 | |||
| 2.128" | -0.01" to 0.01" | 2" | -0.005" to 0.005" | 180° | 0°/90° | 0000000 | |||
| 2.628" | -0.012" to 0.012" | 2 1/2" | -0.005" to 0.005" | 180° | 0°/90° | 0000000 | |||
0.122" Wall Thickness (-0.01" to 0.01") | |||||||||
| 1.244" | -0.012" to 0.012" | 1" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
| 1.494" | -0.012" to 0.012" | 1 1/4" | -0.003" to 0.003" | 180° | 0°/90° | 0000000 | |||
| 1.744" | -0.014" to 0.014" | 1 1/2" | -0.005" to 0.005" | 180° | 0°/90° | 0000000 | |||
| 1.994" | -0.014" to 0.014" | 1 3/4" | -0.005" to 0.005" | 180° | 0°/90° | 0000000 | |||
| 2.244" | -0.014" to 0.014" | 2" | -0.005" to 0.005" | 180° | 0°/90° | 0000000 | |||
| 2.744" | -0.014" to 0.014" | 2 1/2" | -0.008" to 0.008" | 180° | 0°/90° | 0000000 | |||
| 3.244" | -0.014" to 0.014" | 3" | -0.008" to 0.008" | 180° | 0°/90° | 0000000 | |||
Matte Tubes (Twill Weave) | |||||||||
1/32" Wall Thickness (-0.005" to 0.005") | |||||||||
| 1" | -0.012" to 0.012" | 15/16" | -0.006" to 0.006" | 180° | 0°/90° | 0000000 | |||
0.041" Wall Thickness (-0.005" to 0.005") | |||||||||
| 0.832" | -0.012" to 0.012" | 3/4" | -0.006" to 0.006" | 250° | 0°/90° | 0000000 | |||
0.042" Wall Thickness (-0.005" to 0.005") | |||||||||
| 0.584" | -0.012" to 0.012" | 1/2" | -0.006" to 0.006" | 250° | 0°/90° | 0000000 | |||
| 1.334" | -0.012" to 0.012" | 1 1/4" | -0.006" to 0.006" | 250° | 0°/90° | 0000000 | |||
0.05" Wall Thickness (-0.005" to 0.005") | |||||||||
| 1.6" | -0.012" to 0.012" | 1 1/2" | -0.006" to 0.006" | 250° | 0°/90° | 0000000 | |||
0.06" Wall Thickness (-0.005" to 0.005") | |||||||||
| 1.12" | -0.012" to 0.012" | 1" | -0.006" to 0.006" | 250° | 0°/90° | 0000000 | |||
1/16" Wall Thickness (-0.005" to 0.005") | |||||||||
| 1 5/16" | -0.012" to 0.012" | 1 3/16" | -0.006" to 0.006" | 180° | 0°/90° | 0000000 | |||
| 1 5/8" | -0.012" to 0.012" | 1 1/2" | -0.006" to 0.006" | 180° | 0°/90° | 0000000 | |||
| 1 7/8" | -0.012" to 0.012" | 1 3/4" | -0.006" to 0.006" | 180° | 0°/90° | 0000000 | |||
Ultra-Strength Lightweight Carbon Fiber Rods
- Color: Black
- Temperature Range: See table
- Tensile Strength: 120,000-175,000 psi (Excellent)
- Fiber Tensile Stiffness: Standard (33-36 msi)
- Impact Strength: Not Rated
- Hardness: Not Rated
- For Use Outdoors: No
Reinforce structures with these rods—they weigh less than aluminum while remaining strong and almost as rigid. Their fibers are aligned in a single direction, so they hold up to bending across the fibers but will splinter and separate like string cheese when bent along the length of the fiber. Carbon fiber is known for its use in the aerospace industry where a balance of weight and strength is vital.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Temperature Range | Each | |
12" Lg. | ||||
|---|---|---|---|---|
| 1/16" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 3/32" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 0000 |
| 1/8" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 0000 |
| 1/4" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 5/16" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 3/8" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 1/2" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 000000 |
| 5/8" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 3/4" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 000000 |
24" Lg. | ||||
| 1/16" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 0000 |
| 3/32" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 1/8" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 1/4" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 5/16" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 3/8" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 1/2" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 000000 |
| 5/8" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 000000 |
| 3/4" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 000000 |
36" Lg. | ||||
| 0.011" | -0.007" to 0.007" | 0° F to 250° F | 0000000 | 00000 |
| 0.039" | -0.007" to 0.007" | 0° F to 250° F | 0000000 | 00000 |
48" Lg. | ||||
| 1/16" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 3/32" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 1/8" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 1/4" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 5/16" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 00000 |
| 3/8" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 000000 |
| 1/2" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 000000 |
| 5/8" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 000000 |
| 3/4" | -0.006" to 0.006" | -100° F to 180° F | 0000000 | 000000 |
Ultra-Strength Lightweight Carbon Fiber Square Tubes
- Color: Black
- Temperature Range: 0° F to 250° F
- Tensile Strength: 120,000-175,000 psi (Excellent)
- Fiber Tensile Stiffness: Standard (33-36 msi)
- Impact Strength: Not Rated
- Hardness: Not Rated
- For Use Outdoors: No
Mount these lightweight tubes to flat surfaces in place of aluminum to create structural frames, machinery components, and robotics. This carbon fiber weighs less yet is almost as rigid as aluminum. Adopted by the aerospace industry, carbon fiber is known for its balance of weight and strength. And since it's lightweight, it reduces the wear and stress on motorized parts, extending the life of machines.
These tubes have layers that alternate fibers in three directions, so they spread out their strength and resist crushing along the entire tube. They are checked, so they won’t fray or splinter when cut, making them easy to machine. They have the classic carbon-fiber look.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 12" Lg. | 32" Lg. | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Wd. Tolerance | Ht. | Ht. Tolerance | Wd. | Ht. | Each | Each | ||
0.04" Wall Thick. (-0.02" to 0.02") | |||||||||
| 0.83" | -0.02" to 0.02" | 0.83" | -0.02" to 0.02" | 3/4" | 3/4" | 0000000 | 000000 | 0000000 | 0000000 |
| 1.08" | -0.02" to 0.02" | 1.08" | -0.02" to 0.02" | 1" | 1" | 0000000 | 00000 | 0000000 | 000000 |
0.06" Wall Thick. (-0.02" to 0.02") | |||||||||
| 1.37" | -0.02" to 0.02" | 1.37" | -0.02" to 0.02" | 1 1/4" | 1 1/4" | 0000000 | 00000 | 0000000 | 000000 |
Ultra-Strength Lightweight Carbon Fiber Half Rounds
- Color: Black
- Temperature Range: 0° F to 250° F
- Tensile Strength: 120,000-175,000 psi (Excellent)
- Fiber Tensile Stiffness: Standard (33-36 msi)
- Impact Strength: Not Rated
- Hardness: Not Rated
- For Use Outdoors: No
Mount these lightweight half rounds on flat surfaces to reinforce frames and structures. Carbon fiber is often used in place of aluminum because it weighs less but is almost as rigid. These half rounds have fibers that run in one direction, making them strongest in the direction of the fibers. They resist bending across the fibers but will splinter and separate like string cheese when bent along the length of the fiber. Carbon fiber is known for its use in the aerospace industry where a balance of weight and strength is critical.
For technical drawings and 3-D models, click on a part number.
Rigid Ultra-Strength Lightweight Carbon Fiber Round Tubes
- Color: Black
- Temperature Range: -65° F to 180° F
- Tensile Strength: 125,000-175,000 psi (Excellent)
- Fiber Tensile Stiffness: High Modulus (57-63 msi)
- Impact Strength: Not Rated
- Hardness: Not Rated
- For Use Outdoors: No
Often used for structural framing, machinery components, and robotics, these carbon fiber tubes are as stiff as steel yet a fraction of the weight. Carbon fiber is known for its use in the aerospace industry where a balance of weight and strength is vital. Because they are lightweight, they reduce wear and stress on motorized parts, which increases the life of machinery. These tubes are constructed with layers that alternate fibers in two directions, making them difficult to bend.
The checked pattern on these tubes keeps fibers from splintering when the tubes are cut, making them easy to machine. It also has a classic carbon-fiber look. These tubes are glossy and can be sanded for a matte finish.
For technical drawings and 3-D models, click on a part number.
6 ft. Lg. | ||||||
|---|---|---|---|---|---|---|
| OD | OD Tolerance | ID | ID Tolerance | Construction Layup | Each | |
Checked Glossy Tubes | ||||||
1/16" Wall Thickness (-0.005" to 0.005") | ||||||
| 3/8" | -0.008" to 0.008" | 1/4" | -0.003" to 0.003" | 0°/90° | 0000000 | 0000000 |
| 1/2" | -0.008" to 0.008" | 3/8" | -0.003" to 0.003" | 0°/90° | 0000000 | 000000 |
| 5/8" | -0.008" to 0.008" | 1/2" | -0.003" to 0.003" | 0°/90° | 0000000 | 000000 |
| 3/4" | -0.008" to 0.008" | 5/8" | -0.003" to 0.003" | 0°/90° | 0000000 | 000000 |
| 7/8" | -0.008" to 0.008" | 3/4" | -0.003" to 0.003" | 0°/90° | 0000000 | 000000 |
| 1" | -0.008" to 0.008" | 7/8" | -0.003" to 0.003" | 0°/90° | 0000000 | 000000 |
| 1 1/4" | -0.008" to 0.008" | 1 1/8" | -0.003" to 0.003" | 0°/90° | 0000000 | 000000 |
| 1 1/2" | -0.008" to 0.008" | 1 3/8" | -0.003" to 0.003" | 0°/90° | 0000000 | 000000 |
1/8" Wall Thickness (-0.01" to 0.01") | ||||||
| 1/2" | -0.012" to 0.012" | 1/4" | -0.003" to 0.003" | 0°/90° | 0000000 | 000000 |
| 3/4" | -0.012" to 0.012" | 1/2" | -0.003" to 0.003" | 0°/90° | 0000000 | 000000 |
| 1" | -0.012" to 0.012" | 3/4" | -0.003" to 0.003" | 0°/90° | 0000000 | 000000 |
| 1 1/4" | -0.012" to 0.012" | 1" | -0.003" to 0.003" | 0°/90° | 0000000 | 000000 |
| 1 1/2" | -0.012" to 0.012" | 1 1/4" | -0.003" to 0.003" | 0°/90° | 0000000 | 000000 |
| 1 3/4" | -0.014" to 0.014" | 1 1/2" | -0.005" to 0.005" | 0°/90° | 0000000 | 000000 |
Easy-to-Machine Hard Fiber Tubes
- Color: Gray
- Max. Temperature: 235° F
- Tensile Strength: 9,000-21,000 psi (Good)
- Impact Strength: 1.8-2.5 ft.-lbs./in. (Good)
- Hardness: Rockwell R80 (Hard)
- For Use Outdoors: No
- Specifications Met: MIL-F-10336, MIL-F-1148, UL 94 HB
Readily machined and punched into custom parts, these hard fiber tubes are often made into bushings and washers. Also known as vulcanized fiber, they're constructed from lightweight cotton fabric that's been chemically treated to make it hard and dense.
For technical drawings and 3-D models, click on a part number.
| Wall Thick. | Wall Thick. Tolerance | OD | OD Tolerance | ID | ID Tolerance | Lg. | Each | |
| 1/16" | -0.01" to 0.01" | 9/16" | -0.005" to 0.005" | 7/16" | -0.008" to 0.008" | 40" | 0000000 | 000000 |
| 1/16" | -0.01" to 0.01" | 5/8" | -0.005" to 0.005" | 1/2" | -0.008" to 0.008" | 40" | 0000000 | 00000 |
| 1/16" | -0.01" to 0.01" | 7/8" | -0.005" to 0.005" | 3/4" | -0.008" to 0.008" | 40" | 0000000 | 00000 |
| 1/16" | -0.01" to 0.01" | 1" | -0.005" to 0.005" | 7/8" | -0.008" to 0.008" | 40" | 0000000 | 00000 |
| 1/8" | -0.015" to 0.015" | 11/16" | -0.005" to 0.005" | 7/16" | -0.008" to 0.008" | 40" | 0000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 3/4" | -0.005" to 0.005" | 1/2" | -0.008" to 0.008" | 40" | 0000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 1 1/4" | -0.008" to 0.008" | 1" | -0.008" to 0.008" | 40" | 0000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 1 1/2" | -0.008" to 0.008" | 1 1/4" | -0.01" to 0.01" | 40" | 0000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 1 3/4" | -0.008" to 0.008" | 1 1/2" | -0.01" to 0.01" | 40" | 0000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 2 1/4" | -0.01" to 0.01" | 2" | -0.01" to 0.01" | 40" | 0000000 | 00000 |
| 1/4" | -0.015" to 0.015" | 2" | -0.008" to 0.008" | 1 1/2" | -0.01" to 0.01" | 40" | 0000000 | 000000 |
Easy-to-Machine Hard Fiber Rods
- Color: Gray
- Max. Temperature: 235° F
- Tensile Strength: 9,000-21,000 psi (Good)
- Impact Strength: 1.8-2.5 ft.-lbs./in. (Good)
- Hardness: Rockwell R80 (Hard)
- For Use Outdoors: No
- Specifications Met: MIL-F-10336, MIL-F-1148, UL 94 HB
Frequently used to make gears and bushings, these hard fiber rods can be readily machined and punched into custom parts. They are constructed from lightweight cotton fabric that's been chemically treated to make them hard and dense. Hard fiber is also known as vulcanized fiber.
For technical drawings and 3-D models, click on a part number.
45" Lg. | |||
|---|---|---|---|
| Dia. | Dia. Tolerance | Each | |
| 3/16" | -0.005" to 0.005" | 0000000 | 000000 |
| 1/4" | -0.005" to 0.005" | 0000000 | 00000 |
| 5/16" | -0.006" to 0.006" | 0000000 | 00000 |
| 3/8" | -0.006" to 0.006" | 0000000 | 00000 |
| 1/2" | -0.006" to 0.006" | 0000000 | 00000 |
| 9/16" | -0.006" to 0.006" | 0000000 | 000000 |
| 5/8" | -0.006" to 0.006" | 0000000 | 000000 |
| 3/4" | -0.006" to 0.006" | 0000000 | 000000 |