Fiberglass L-Channels | McMaster-Carr

Clear All

	Material Material

Fiberglass

Garolite

	System of Measurement System of Measurement

Inch

	Outside Width Outside Width

	Wall Thickness Wall Thickness

	Grade Grade

	Length Length

	Outside Height Outside Height

	Flexibility Flexibility

	Rigid

	Performance Properties Performance Properties

	Color Color

	Gray		Green
	Red		Yellow

	For Use Outdoors For Use Outdoors

Yes

	Outside Corner Shape Outside Corner Shape

Square

Round

	Inside Corner Shape Inside Corner Shape

Round

Square

	Hardness Rating Hardness Rating

Hard

Extra Hard

	Inside Width Inside Width

	Texture Texture

	Smooth

	Impact Strength Rating Impact Strength Rating

Excellent

	Maximum Temperature Maximum Temperature

Less than 200° F

250° to 299° F

300° to 999° F

	Electrical Insulation Rating Electrical Insulation Rating

Excellent

Poor

Good

	Dielectric Strength Dielectric Strength

	Leg Edge Shape Leg Edge Shape

Round

Square

	Resin Material Resin Material

Polyester

Epoxy

Plastic

	Inside Height Inside Height

	Water Absorption Rating Water Absorption Rating

Poor

Good

View catalog pages (4)

Forward

How can we improve?

131 Products

About Composites

Color: Green
Temperature Range: -60° F to 140° F
Tensile Strength: 7,000-30,000 psi (Good)
Impact Strength: 4-25 ft.-lbs./in. (Excellent)
Hardness: Barcol 45 (Hard)
For Use Outdoors: Yes

A lightweight alternative to wood in structural applications, these FRP fiberglass 90° angles are strong. They're made of fiberglass reinforced polyester.

For technical drawings and 3-D models, click on a part number.

Outside				Inside
Wd.	Wd. Tolerance	Ht.	Ht. Tolerance	Wd.	Ht.		Each
2 ft. Lg.
1/8" Wall Thick. (-0.0130" to 0.0130")
1"	-0.094" to 0.094"	1"	-0.094" to 0.094"	7/8"	7/8"	0000000	00000
1 1/4"	-0.094" to 0.094"	1 1/4"	-0.094" to 0.094"	1 1/8"	1 1/8"	0000000	0000
3/16" Wall Thick. (-0.0190" to 0.0190")
3/4"	-0.094" to 0.094"	1"	-0.094" to 0.094"	9/16"	13/16"	0000000	0000
1 1/2"	-0.094" to 0.094"	1 1/2"	-0.094" to 0.094"	1 5/16"	1 5/16"	0000000	00000
1/4" Wall Thick. (-0.0250" to 0.0250")
1 1/2"	-0.094" to 0.094"	1 1/2"	-0.094" to 0.094"	1 1/4"	1 1/4"	0000000	00000
2"	-0.094" to 0.094"	2"	-0.094" to 0.094"	1 3/4"	1 3/4"	0000000	00000
3"	-0.094" to 0.094"	3"	-0.094" to 0.094"	2 3/4"	2 3/4"	0000000	00000
4"	-0.094" to 0.094"	4"	-0.094" to 0.094"	3 3/4"	3 3/4"	0000000	00000
3/8" Wall Thick. (-0.0380" to 0.0380")
3"	-0.094" to 0.094"	3"	-0.094" to 0.094"	2 5/8"	2 5/8"	0000000	00000
4"	-0.094" to 0.094"	4"	-0.094" to 0.094"	3 5/8"	3 5/8"	0000000	00000
6"	-0.094" to 0.094"	6"	-0.094" to 0.094"	5 5/8"	5 5/8"	0000000	00000
1/2" Wall Thick. (-0.0500" to 0.0500")
4"	-0.094" to 0.094"	4"	-0.094" to 0.094"	3 1/2"	3 1/2"	0000000	00000
6"	-0.094" to 0.094"	6"	-0.094" to 0.094"	5 1/2"	5 1/2"	0000000	00000
5 ft. Lg.
1/8" Wall Thick. (-0.0130" to 0.0130")
1"	-0.094" to 0.094"	1"	-0.094" to 0.094"	7/8"	7/8"	0000000	00000
1 1/4"	-0.094" to 0.094"	1 1/4"	-0.094" to 0.094"	1 1/8"	1 1/8"	0000000	00000
3/16" Wall Thick. (-0.0190" to 0.0190")
3/4"	-0.094" to 0.094"	1"	-0.094" to 0.094"	9/16"	13/16"	0000000	00000
1 1/2"	-0.094" to 0.094"	1 1/2"	-0.094" to 0.094"	1 5/16"	1 5/16"	0000000	00000
1/4" Wall Thick. (-0.0250" to 0.0250")
1 1/2"	-0.094" to 0.094"	1 1/2"	-0.094" to 0.094"	1 1/4"	1 1/4"	0000000	00000
2"	-0.094" to 0.094"	2"	-0.094" to 0.094"	1 3/4"	1 3/4"	0000000	00000
3"	-0.094" to 0.094"	3"	-0.094" to 0.094"	2 3/4"	2 3/4"	0000000	00000
4"	-0.094" to 0.094"	4"	-0.094" to 0.094"	3 3/4"	3 3/4"	0000000	00000
3/8" Wall Thick. (-0.0380" to 0.0380")
3"	-0.094" to 0.094"	3"	-0.094" to 0.094"	2 5/8"	2 5/8"	0000000	00000
4"	-0.094" to 0.094"	4"	-0.094" to 0.094"	3 5/8"	3 5/8"	0000000	00000
6"	-0.094" to 0.094"	6"	-0.094" to 0.094"	5 5/8"	5 5/8"	0000000	000000
1/2" Wall Thick. (-0.0500" to 0.0500")
4"	-0.094" to 0.094"	4"	-0.094" to 0.094"	3 1/2"	3 1/2"	0000000	000000
6"	-0.094" to 0.094"	6"	-0.094" to 0.094"	5 1/2"	5 1/2"	0000000	000000
10 ft. Lg.
1/8" Wall Thick. (-0.0130" to 0.0130")
1"	-0.094" to 0.094"	1"	-0.094" to 0.094"	7/8"	7/8"	0000000	00000
1 1/4"	-0.094" to 0.094"	1 1/4"	-0.094" to 0.094"	1 1/8"	1 1/8"	0000000	00000
3/16" Wall Thick. (-0.0190" to 0.0190")
3/4"	-0.094" to 0.094"	1"	-0.094" to 0.094"	9/16"	13/16"	0000000	00000
1 1/2"	-0.094" to 0.094"	1 1/2"	-0.094" to 0.094"	1 5/16"	1 5/16"	0000000	00000
1/4" Wall Thick. (-0.0250" to 0.0250")
1 1/2"	-0.094" to 0.094"	1 1/2"	-0.094" to 0.094"	1 1/4"	1 1/4"	0000000	00000
2"	-0.094" to 0.094"	2"	-0.094" to 0.094"	1 3/4"	1 3/4"	0000000	00000
3"	-0.094" to 0.094"	3"	-0.094" to 0.094"	2 3/4"	2 3/4"	0000000	00000
4"	-0.094" to 0.094"	4"	-0.094" to 0.094"	3 3/4"	3 3/4"	0000000	000000
3/8" Wall Thick. (-0.0380" to 0.0380")
3"	-0.094" to 0.094"	3"	-0.094" to 0.094"	2 5/8"	2 5/8"	0000000	000000
4"	-0.094" to 0.094"	4"	-0.094" to 0.094"	3 5/8"	3 5/8"	0000000	000000
6"	-0.094" to 0.094"	6"	-0.094" to 0.094"	5 5/8"	5 5/8"	0000000	000000
1/2" Wall Thick. (-0.0500" to 0.0500")
4"	-0.094" to 0.094"	4"	-0.094" to 0.094"	3 1/2"	3 1/2"	0000000	000000
6"	-0.094" to 0.094"	6"	-0.094" to 0.094"	5 1/2"	5 1/2"	0000000	000000
20 ft. Lg.
1/8" Wall Thick. (-0.0130" to 0.0130")
1"	-0.094" to 0.094"	1"	-0.094" to 0.094"	7/8"	7/8"	0000000	00000
1 1/4"	-0.094" to 0.094"	1 1/4"	-0.094" to 0.094"	1 1/8"	1 1/8"	0000000	00000
3/16" Wall Thick. (-0.0190" to 0.0190")
3/4"	-0.094" to 0.094"	1"	-0.094" to 0.094"	9/16"	13/16"	0000000	00000
1 1/2"	-0.094" to 0.094"	1 1/2"	-0.094" to 0.094"	1 5/16"	1 5/16"	0000000	00000
1/4" Wall Thick. (-0.0250" to 0.0250")
1 1/2"	-0.094" to 0.094"	1 1/2"	-0.094" to 0.094"	1 1/4"	1 1/4"	0000000	000000
2"	-0.094" to 0.094"	2"	-0.094" to 0.094"	1 3/4"	1 3/4"	0000000	000000
3"	-0.094" to 0.094"	3"	-0.094" to 0.094"	2 3/4"	2 3/4"	0000000	000000
4"	-0.094" to 0.094"	4"	-0.094" to 0.094"	3 3/4"	3 3/4"	0000000	000000
3/8" Wall Thick. (-0.0380" to 0.0380")
3"	-0.094" to 0.094"	3"	-0.094" to 0.094"	2 5/8"	2 5/8"	0000000	000000
4"	-0.094" to 0.094"	4"	-0.094" to 0.094"	3 5/8"	3 5/8"	0000000	000000
6"	-0.094" to 0.094"	6"	-0.094" to 0.094"	5 5/8"	5 5/8"	0000000	000000
1/2" Wall Thick. (-0.0500" to 0.0500")
4"	-0.094" to 0.094"	4"	-0.094" to 0.094"	3 1/2"	3 1/2"	0000000	000000
6"	-0.094" to 0.094"	6"	-0.094" to 0.094"	5 1/2"	5 1/2"	0000000	000000

Arc-Resistant GPO3 Fiberglass 90° Angles

Color: Red
Tensile Strength: 10,000-15,000 psi (Good)
Impact Strength: 8.2-12 ft.-lbs./in. (Excellent)
Hardness: See table
For Use Outdoors: No
Specifications Met: UL 94 V-0

Because these GPO3 fiberglass 90° angles are arc and track resistant, they are often used for electrical applications in humid environments. They offer better electrical insulation properties than FRP fiberglass. Made of fiberglass-reinforced polyester, they're also called polyester-grade industrial laminate.

For technical drawings and 3-D models, click on a part number.

Outside				Inside
Wd.	Wd. Tolerance	Ht.	Ht. Tolerance	Wd.	Ht.	Hardness	Straightness Tolerance		Each
3 ft. Lg.
1/8" Wall Thick. (-0.0200" to 0.0200")
1"	-0.062" to 0.062"	1"	-0.062" to 0.062"	7/8"	7/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
1 1/4"	-0.062" to 0.062"	1 1/4"	-0.062" to 0.062"	1 1/8"	1 1/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	0000
1 1/2"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	1 3/8"	1 3/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
3/16" Wall Thick. (-0.0200" to 0.0200")
1 1/4"	-0.062" to 0.062"	1 1/4"	-0.062" to 0.062"	1 1/16"	1 1/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
1 1/2"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	1 5/16"	1 5/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2"	-0.062" to 0.062"	2"	-0.062" to 0.062"	1 13/16"	1 13/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2 1/4"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	2 1/16"	1 5/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2 1/2"	-0.062" to 0.062"	1 1/4"	-0.062" to 0.062"	2 5/16"	1 1/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2 9/16"	-0.094" to 0.094"	1 5/8"	-0.094" to 0.094"	2 3/8"	1 7/16"	Barcol 50 (Hard)	0.050" per ft.	0000000	00000
4"	-0.094" to 0.094"	1 5/8"	-0.094" to 0.094"	3 13/16"	1 7/16"	Barcol 50 (Hard)	0.050" per ft.	0000000	00000
1/4" Wall Thick. (-0.0200" to 0.0200")
1 1/2"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	1 1/4"	1 1/4"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2"	-0.094" to 0.094"	2"	-0.094" to 0.094"	1 3/4"	1 3/4"	Barcol 50 (Hard)	0.050" per ft.	0000000	00000
2 3/4"	-0.062" to 0.062"	2"	-0.062" to 0.062"	2 1/2"	1 3/4"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
3"	-0.094" to 0.094"	2 3/4"	-0.094" to 0.094"	2 3/4"	2 1/2"	Barcol 50 (Hard)	0.050" per ft.	0000000	00000
3"	-0.062" to 0.062"	3"	-0.062" to 0.062"	2 3/4"	2 3/4"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
3/8" Wall Thick. (-0.0250" to 0.0250")
1 3/4"	-0.062" to 0.062"	2"	-0.062" to 0.062"	1 3/8"	1 5/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
3"	-0.062" to 0.062"	3"	-0.062" to 0.062"	2 5/8"	2 5/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
1/2" Wall Thick. (-0.0250" to 0.0250")
2 1/4"	-0.062" to 0.062"	3"	-0.062" to 0.062"	1 3/4"	2 1/2"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
6"	-0.062" to 0.062"	3"	-0.062" to 0.062"	5 1/2"	2 1/2"	Rockwell M95 (Hard)	0.050" per ft.	0000000	000000
6 ft. Lg.
1/8" Wall Thick. (-0.0200" to 0.0200")
1"	-0.062" to 0.062"	1"	-0.062" to 0.062"	7/8"	7/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
1 1/4"	-0.062" to 0.062"	1 1/4"	-0.062" to 0.062"	1 1/8"	1 1/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
1 1/2"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	1 3/8"	1 3/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
3/16" Wall Thick. (-0.0200" to 0.0200")
1 1/4"	-0.062" to 0.062"	1 1/4"	-0.062" to 0.062"	1 1/16"	1 1/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
1 1/2"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	1 5/16"	1 5/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2"	-0.062" to 0.062"	2"	-0.062" to 0.062"	1 13/16"	1 13/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2 1/4"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	2 1/16"	1 5/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2 1/2"	-0.062" to 0.062"	1 1/4"	-0.062" to 0.062"	2 5/16"	1 1/16"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2 9/16"	-0.094" to 0.094"	1 5/8"	-0.094" to 0.094"	2 3/8"	1 7/16"	Barcol 50 (Hard)	0.050" per ft.	0000000	00000
4"	-0.094" to 0.094"	1 5/8"	-0.094" to 0.094"	3 13/16"	1 7/16"	Barcol 50 (Hard)	0.050" per ft.	0000000	00000
1/4" Wall Thick. (-0.0200" to 0.0200")
1 1/2"	-0.062" to 0.062"	1 1/2"	-0.062" to 0.062"	1 1/4"	1 1/4"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
2"	-0.094" to 0.094"	2"	-0.094" to 0.094"	1 3/4"	1 3/4"	Barcol 50 (Hard)	0.050" per ft.	0000000	00000
2 3/4"	-0.062" to 0.062"	2"	-0.062" to 0.062"	2 1/2"	1 3/4"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
3"	-0.094" to 0.094"	2 3/4"	-0.094" to 0.094"	2 3/4"	2 1/2"	Barcol 50 (Hard)	0.050" per ft.	0000000	00000
3"	-0.062" to 0.062"	3"	-0.062" to 0.062"	2 3/4"	2 3/4"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
3/8" Wall Thick. (-0.0250" to 0.0250")
1 3/4"	-0.062" to 0.062"	2"	-0.062" to 0.062"	1 3/8"	1 5/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
3"	-0.062" to 0.062"	3"	-0.062" to 0.062"	2 5/8"	2 5/8"	Rockwell M95 (Hard)	0.050" per ft.	0000000	00000
1/2" Wall Thick. (-0.0250" to 0.0250")
2 1/4"	-0.062" to 0.062"	3"	-0.062" to 0.062"	1 3/4"	2 1/2"	Rockwell M95 (Hard)	0.050" per ft.	0000000	000000
6"	-0.062" to 0.062"	3"	-0.062" to 0.062"	5 1/2"	2 1/2"	Rockwell M95 (Hard)	0.050" per ft.	0000000	000000

Flame-Retardant FRP Fiberglass 90° Angles

Color: Gray
Temperature Range: -60° F to 140° F
Tensile Strength: 7,000-30,000 psi (Good)
Impact Strength: 4-25 ft.-lbs./in. (Excellent)
Hardness: Barcol 45 (Hard)
For Use Outdoors: Yes
Specifications Met: ASTM E84 Class A

These lightweight FRP fiberglass 90° angles, which are made with a flame-retardant resin, meet ASTM E84 Class A. An alternative to wood in structural applications, they're strong and lightweight.

For technical drawings and 3-D models, click on a part number.

Outside				Inside			5 ft. Lg.		10 ft. Lg.
Wd.	Wd. Tolerance	Ht.	Ht. Tolerance	Wd.	Ht.	Straightness Tolerance		Each		Each
1/8" Wall Thick. (-0.013" to 0.013")
1"	-0.094" to 0.094"	1"	-0.094" to 0.094"	7/8"	7/8"	0.050" per ft.	0000000	000000	0000000	000000
1/4" Wall Thick. (-0.025" to 0.025")
1 1/2"	-0.094" to 0.094"	1 1/2"	-0.094" to 0.094"	1 1/4"	1 1/4"	0.050" per ft.	0000000	00000	0000000	00000
2"	-0.094" to 0.094"	2"	-0.094" to 0.094"	1 3/4"	1 3/4"	0.050" per ft.	0000000	00000	0000000	000000
3"	-0.094" to 0.094"	3"	-0.094" to 0.094"	2 3/4"	2 3/4"	0.050" per ft.	0000000	000000	0000000	000000

Multipurpose Flame-Retardant Garolite G-10/FR4 Angles

Color: Yellow
Max. Temperature: 265° F
Tensile Strength: 32,000-40,000 psi (Excellent)
Impact Strength: 5.5-9.5 ft.-lbs./in. (Excellent)
Hardness: Rockwell M100 (Extra Hard)
For Use Outdoors: No
Specifications Met: MIL-I-24768/27

A good all-around choice, these Garolite G-10/FR4 angles are strong, machinable, and electrically insulating. They're made of flame-retardant epoxy resin with fiberglass fabric reinforcement. Garolite G-10/FR4 is also called epoxy-grade industrial laminate and phenolic.

For technical drawings and 3-D models, click on a part number.

Outside				Inside		30" Lg.
Wd.	Wd. Tolerance	Ht.	Ht. Tolerance	Wd.	Ht.		Each
1/16" Wall Thick. (-0.028" to 0.028")
1"	-0.063" to 0.063"	1"	-0.063" to 0.063"	15/16"	15/16"	0000000	0000000
1 1/2"	-0.063" to 0.063"	1 1/2"	-0.063" to 0.063"	1 7/16"	1 7/16"	0000000	000000
2"	-0.063" to 0.063"	2"	-0.063" to 0.063"	1 15/16"	1 15/16"	0000000	000000
1/8" Wall Thick. (-0.028" to 0.028")
1"	-0.063" to 0.063"	1"	-0.063" to 0.063"	7/8"	7/8"	0000000	000000
1 1/2"	-0.063" to 0.063"	1 1/2"	-0.063" to 0.063"	1 3/8"	1 3/8"	0000000	000000
2"	-0.063" to 0.063"	2"	-0.063" to 0.063"	1 7/8"	1 7/8"	0000000	000000
3/16" Wall Thick. (-0.028" to 0.028")
1"	-0.063" to 0.063"	1"	-0.063" to 0.063"	13/16"	13/16"	0000000	000000
1 1/2"	-0.063" to 0.063"	1 1/2"	-0.063" to 0.063"	1 5/16"	1 5/16"	0000000	000000
2"	-0.063" to 0.063"	2"	-0.063" to 0.063"	1 13/16"	1 13/16"	0000000	000000
1/4" Wall Thick. (-0.028" to 0.028")
1"	-0.063" to 0.063"	1"	-0.063" to 0.063"	3/4"	3/4"	0000000	000000
1 1/2"	-0.063" to 0.063"	1 1/2"	-0.063" to 0.063"	1 1/4"	1 1/4"	0000000	000000
2"	-0.063" to 0.063"	2"	-0.063" to 0.063"	1 3/4"	1 3/4"	0000000	000000

Flame-Retardant High-Temperature Garolite G-11/FR5 Angles

Color: Yellow
Max. Temperature: 355° F
Tensile Strength: 35,000 psi (Excellent)
Impact Strength: 10 ft.-lbs./in. (Excellent)
Hardness: Rockwell M115 (Extra Hard)
For Use Outdoors: No
Specifications Met: MIL-I-24768/28

Good for use as structural mounting brackets, components, and electrical housings in high temperatures, these angles are a flame-retardant version of Garolite G-11. All are stronger and resist heat better than Garolite G-10/FR4. They keep at least 50% of their structural strength at temperatures above 300° F. These angles are made of a flame-retardant epoxy resin that is reinforced with fiberglass fabric.

Garolite G-11/FR5 is also called epoxy fiberglass, epoxy-grade industrial laminate, and phenolic.

For technical drawings and 3-D models, click on a part number.

Outside				Inside		30" Lg.
Width	Width Tolerance	Height	Height Tolerance	Width	Height		Each
1/16" Wall Thickness (-0.0075" to +0.0075")
1"	-0.25" to 0.25"	1"	-0.25" to 0.25"	15/16"	15/16"	0000000	0000000
1 1/2"	-0.25" to 0.25"	1 1/2"	-0.25" to 0.25"	1 7/16"	1 7/16"	0000000	000000
2"	-0.25" to 0.25"	2"	-0.25" to 0.25"	1 15/16"	1 15/16"	0000000	000000
1/8" Wall Thickness (-0.012" to +0.012")
1"	-0.25" to 0.25"	1"	-0.25" to 0.25"	7/8"	7/8"	0000000	000000
1 1/2"	-0.25" to 0.25"	1 1/2"	-0.25" to 0.25"	1 3/8"	1 3/8"	0000000	000000
2"	-0.25" to 0.25"	2"	-0.25" to 0.25"	1 7/8"	1 7/8"	0000000	000000
3/16" Wall Thickness (-0.019" to +0.019")
1"	-0.25" to 0.25"	1"	-0.25" to 0.25"	13/16"	13/16"	0000000	000000
1 1/2"	-0.25" to 0.25"	1 1/2"	-0.25" to 0.25"	1 5/16"	1 5/16"	0000000	000000
2"	-0.25" to 0.25"	2"	-0.25" to 0.25"	1 13/16"	1 13/16"	0000000	000000
1/4" Wall Thickness (-0.022" to +0.022")
1"	-0.25" to 0.25"	1"	-0.25" to 0.25"	3/4"	3/4"	0000000	000000
1 1/2"	-0.25" to 0.25"	1 1/2"	-0.25" to 0.25"	1 1/4"	1 1/4"	0000000	000000
2"	-0.25" to 0.25"	2"	-0.25" to 0.25"	1 3/4"	1 3/4"	0000000	000000

Arc-Resistant Garolite G-9 Angles

Color: Gray
Maximum Temperature: 280° F
Tensile Strength: 30,000-37,000 psi (Excellent)
Impact Strength: 5.5-7.0 ft.-lbs./in. (Excellent)
Hardness: Rockwell M120 (Extra Hard)
For Use Outdoors: Yes
Specifications Met: UL 94 V-0

Machine these angles into arc barriers, switch mounts, and components for circuit breakers and electrical equipment. They resist carrying electric currents in dry or humid areas, even when exposed to sudden electric discharge. Strong, they’re also good for making terminal boards and other structural parts. They won’t crack if hit, and they resist breaking while carrying heavy loads. Meets UL 94 V-0 for flame retardance.

Garolite G-9 is also known as electrical-grade Garolite, melamine-grade industrial laminate, phenolic, and Bakelite.

For technical drawings and 3-D models, click on a part number.

Outside				Inside		36" Length
Width	Width Tolerance	Height	Height Tolerance	Width	Height		Each
1/8" Wall Thick. (-0.03" to 0.03")
1"	-0.125" to 0.125"	1"	-0.125" to 0.125"	7/8"	7/8"	00000000	0000000
1 1/2"	-0.187" to 0.187"	1 1/2"	-0.187" to 0.187"	1 3/8"	1 3/8"	00000000	000000
2"	-0.25" to 0.25"	2"	-0.25" to 0.25"	1 7/8"	1 7/8"	00000000	000000
3/16" Wall Thick. (-0.04" to 0.04")
1"	-0.125" to 0.125"	1"	-0.125" to 0.125"	13/16"	13/16"	00000000	000000
1 1/2"	-0.187" to 0.187"	1 1/2"	-0.187" to 0.187"	1 5/16"	1 5/16"	00000000	000000
2"	-0.25" to 0.25"	2"	-0.25" to 0.25"	1 13/16"	1 13/16"	00000000	000000
1/4" Wall Thick. (-0.05" to 0.05")
1"	-0.125" to 0.125"	1"	-0.125" to 0.125"	3/4"	3/4"	00000000	000000
1 1/2"	-0.187" to 0.187"	1 1/2"	-0.187" to 0.187"	1 1/4"	1 1/4"	00000000	000000
2"	-0.25" to 0.25"	2"	-0.25" to 0.25"	1 3/4"	1 3/4"	00000000	000000

About Composites

Structural FRP Fiberglass 90° Angles

Arc-Resistant GPO3 Fiberglass 90° Angles

Flame-Retardant FRP Fiberglass 90° Angles

Multipurpose Flame-Retardant Garolite G-10/FR4 Angles

Flame-Retardant High-Temperature Garolite G-11/FR5 Angles

Arc-Resistant Garolite G-9 Angles