OD OD |
|---|
With or Without Bearing With or Without Bearing |
|---|
|
Capacity Capacity |
|---|
|
Width Width |
|---|
Attachment Type Attachment Type |
|---|
 |  |
| Eye | Latching Hook |
 |  |
| Shackle | Hook |
Application Application |
|---|
|
Insertion Style Insertion Style |
|---|
|
Pulley Diameter Pulley Diameter |
|---|
|
|
|
Overall Height Overall Height |
|---|
Overall Length Overall Length |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Pulleys
More
Pulleys for Rope—For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Acetal and aluminum are lightweight and corrosion resistant. Galvanized steel is more corrosion resistant than iron and steel. Stainless steel is the most corrosion resistant.
For technical drawings and 3-D models, click on a part number.
| For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | Each | |
Without Bearing | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/16" | Not Rated | 3/4" | 9/16" | 5/16" | 1/4" | Acetal Plastic | 0000000 | 00000 |
| 3/16" | Not Rated | 2 5/8" | 2" | 5/16" | 1/2" | Acetal Plastic | 0000000 | 0000 |
| 1/4" | 400 | 1 1/4" | 1" | 1/4" | 1/2" | Stainless Steel | 0000000 | 00000 |
| 5/16" | 600 | 1 3/4" | 1 7/16" | 1/4" | 5/8" | Stainless Steel | 0000000 | 00000 |
| 3/8" | 750 | 1 3/4" | 1 7/16" | 3/8" | 1/2" | Steel | 0000000 | 00000 |
| 3/8" | 1,000 | 2 1/4" | 1 7/8" | 3/8" | 13/16" | Stainless Steel | 0000000 | 00000 |
| 7/16" | 1,500 | 3 1/4" | 2 13/16" | 1/4" | 15/16" | Stainless Steel | 0000000 | 00000 |
| 1/2" | Not Rated | 2" | 1 5/8" | 3/8" | 5/8" | Aluminum | 00000000 | 00000 |
| 1/2" | 1,000 | 2 1/4" | 1 15/16" | 3/8" | 5/8" | Steel | 0000000 | 00000 |
| 1/2" | 1,500 | 3 1/4" | 2 3/4" | 1/2" | 15/16" | Stainless Steel | 0000000 | 00000 |
| 9/16" | 3,000 | 4 1/4" | 3 11/16" | 3/8" | 1 1/8" | Stainless Steel | 000000 | 00000 |
| 5/8" | Not Rated | 4" | 3 3/8" | 5/8" | 13/16" | Aluminum | 00000000 | 00000 |
| 5/8" | 1,250 | 3" | 2 11/16" | 3/8" | 3/4" | Galvanized Steel | 0000000 | 00000 |
| 5/8" | 3,000 | 4 1/4" | 3 5/8" | 1/2" | 1 1/8" | Stainless Steel | 0000000 | 00000 |
| 3/4" | 2,000 | 3 1/2" | 3" | 1/2" | 1" | Galvanized Steel | 0000000 | 00000 |
| 3/4" | 5,000 | 5 1/4" | 4 1/2" | 1/2" | 1 3/8" | Stainless Steel | 0000000 | 000000 |
| 1" | 3,000 | 4 3/4" | 4 3/16" | 5/8" | 1 1/8" | Iron | 0000000 | 000000 |
| 1" | 8,000 | 6 1/4" | 5 1/4" | 3/4" | 1 5/8" | Stainless Steel | 0000000 | 000000 |
With Bearing | ||||||||
| 1/4" | 300 | 1 1/4" | 1" | 1/4" | 1/2" | Stainless Steel | 0000000 | 00000 |
| 3/8" | 1,000 | 2 1/4" | 1 7/8" | 3/8" | 13/16" | Stainless Steel | 0000000 | 00000 |
| 1/2" | Not Rated | 2" | 1 5/8" | 3/8" | 5/8" | Aluminum | 00000000 | 00000 |
| 1/2" | 1,200 | 3 1/4" | 2 3/4" | 1/2" | 15/16" | Stainless Steel | 0000000 | 00000 |
| 5/8" | Not Rated | 4" | 3 3/8" | 5/8" | 13/16" | Aluminum | 00000000 | 00000 |
| 5/8" | 2,500 | 4 1/4" | 3 5/8" | 5/8" | 1 1/16" | Stainless Steel | 0000000 | 000000 |
Hanging Pulleys for Rope—For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Acetal, nylon, and aluminum are lightweight and corrosion resistant. Stainless steel is the most corrosion resistant.
Styles C, H, and P have a bracket on the bottom for tying off one end of a rope.
Style J reduce the force needed to hold your load in place. Unlike standard pulleys, these have a V-groove for more grip on your rope, and they ratchet when under load so they won't slip in the other direction. Pulley for 3/8" dia. rope can be set to ratchet even when not under load.
For technical drawings and 3-D models, click on a part number.
| Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Hook Opening Wd. | Hook Thick. | Material | Housing Material | Each | |
Single-Groove Without Bearing | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rigid Eye | ||||||||||||||
| A | 3/16" | Not Rated | 3/4" | 1/2" | 3/4" | 2 1/16" | 1/4" | 1/4" | __ | __ | Aluminum | Aluminum | 0000000 | 000000 |
| A | 1/4" | Not Rated | 1" | 3/4" | 1" | 2 5/8" | 3/8" | 1/4" | __ | __ | Bronze | Bronze | 0000000 | 00000 |
| A | 5/16" | Not Rated | 1 3/8" | 7/8" | 1 3/8" | 3 1/8" | 1/2" | 1/4" | __ | __ | Aluminum | Aluminum | 0000000 | 00000 |
| A | 3/8" | Not Rated | 1 1/2" | 1" | 1 1/2" | 3 5/16" | 1/2" | 5/16" | __ | __ | Bronze | Bronze | 0000000 | 00000 |
| A | 3/8" | Not Rated | 1 1/2" | 1" | 1 1/2" | 3 1/2" | 9/16" | 5/16" | __ | __ | Iron | Iron | 0000000 | 00000 |
| A | 1/2" | Not Rated | 2" | 1 1/8" | 2" | 4 1/2" | 11/16" | 3/8" | __ | __ | Iron | Iron | 0000000 | 00000 |
| A | 5/8" | Not Rated | 2 1/2" | 1 3/8" | 2 1/2" | 5 5/16" | 7/8" | 3/8" | __ | __ | Iron | Iron | 0000000 | 00000 |
| A | 3/4" | Not Rated | 3" | 1 5/8" | 3" | 6 1/4" | 15/16" | 1/2" | __ | __ | Iron | Iron | 0000000 | 00000 |
| E | 3/16" | 325 | 3/4" | 3/8" | 3/4" | 1 3/8" | 3/16" | 1/8" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
| E | 5/16" | 650 | 1 1/8" | 1/2" | 1 1/8" | 2" | 3/16" | 1/2" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
Rigid Latching Hook | ||||||||||||||
| C | 5/8" | 1,200 | 3" | 1 1/4" | 3" | 11 7/8" | __ | __ | 3/4" | 11/16" | Steel | Steel | 0000000 | 000000 |
| C | 3/4" | 1,800 | 3 1/2" | 1 11/16" | 3 1/2" | 13 1/4" | __ | __ | 1 1/16" | 13/16" | Steel | Steel | 0000000 | 000000 |
Swivel Eye | ||||||||||||||
| B | 5/32" | 25 | 1/2" | 1/2" | 1/2" | 1 3/4" | 1/4" | 3/16" | __ | __ | Iron | Iron | 0000000 | 0000 |
| B | 3/16" | 30 | 3/4" | 1/2" | 3/4" | 2 1/4" | 3/8" | 3/16" | __ | __ | Iron | Iron | 0000000 | 0000 |
| B | 1/4" | 30 | 1" | 5/8" | 1" | 2 1/2" | 3/8" | 3/16" | __ | __ | Iron | Iron | 0000000 | 0000 |
| B | 5/16" | 50 | 1 1/2" | 3/4" | 1 1/2" | 3 1/2" | 5/8" | 1/4" | __ | __ | Iron | Iron | 0000000 | 0000 |
| B | 7/16" | 55 | 2" | 7/8" | 2" | 4 1/4" | 11/16" | 1/4" | __ | __ | Iron | Iron | 0000000 | 0000 |
| K | 1/4" | 400 | 1 1/4" | 7/8" | 1 1/4" | 3 1/4" | 5/8" | 1/4" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| K | 5/16" | 600 | 1 3/4" | 15/16" | 1 3/4" | 3 7/8" | 5/8" | 1/4" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| K | 3/8" | 1,000 | 2 1/4" | 1 1/16" | 2 1/4" | 5" | 13/16" | 5/16" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Swivel Shackle | ||||||||||||||
| F | 1/4" | 325 | 1" | 1/2" | 1" | 2 1/8" | 1/4" | 3/16" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
| G | 7/16" | 875 | 1 9/16" | 3/4" | 1 9/16" | 3 1/2" | 1/2" | 3/16" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
| G | 1/2" | 1,650 | 2" | 1" | 2" | 4" | 1/2" | 1/4" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
| H | 1/2" | 1,650 | 2" | 1" | 2" | 5" | 1/2" | 1/4" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
| J | 5/16" | 375 | 1 9/16" | 13/16" | 1 9/16" | 3 1/8" | 3/8" | 3/16" | __ | __ | Aluminum | Nylon Plastic | 0000000 | 00000 |
| J | 3/8" | 550 | 2 3/16" | 15/16" | 2 3/16" | 3 7/8" | 3/8" | 3/16" | __ | __ | Aluminum | Nylon Plastic | 0000000 | 00000 |
Swivel Hook | ||||||||||||||
| L | 3/8" | 750 | 2" | 1 1/8" | 2" | 5 1/2" | __ | __ | 9/16" | 7/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Single-Groove With Bearing | ||||||||||||||
Swivel Eye | ||||||||||||||
| D | 1 1/4" | 2,000 | 4 1/2" | 2 1/4" | 4 1/2" | 8 5/8" | 1 1/4" | 1/2" | __ | __ | Steel | Steel | 00000000 | 000000 |
Double-Groove Without Bearing | ||||||||||||||
Rigid Eye | ||||||||||||||
| N | 3/8" | Not Rated | 1 1/2" | 1 5/8" | 1 1/2" | 3 1/2" | 1/2" | 5/16" | __ | __ | Steel | Steel | 0000000 | 00000 |
| N | 1/2" | Not Rated | 2" | 1 7/8" | 2" | 4 9/16" | 13/16" | 7/16" | __ | __ | Steel | Steel | 0000000 | 00000 |
Rigid Latching Hook | ||||||||||||||
| Q | 1/2" | 1,400 | 2 1/4" | 2" | 2 1/4" | 11 1/2" | __ | __ | 1 1/16" | 3/4" | Steel | Steel | 0000000 | 000000 |
| Q | 5/8" | 1,800 | 3" | 3" | 3" | 12 7/8" | __ | __ | 1 1/16" | 3/4" | Steel | Steel | 0000000 | 000000 |
| Q | 3/4" | 2,500 | 3 1/2" | 3" | 3 1/2" | 14" | __ | __ | 1 1/16" | 15/16" | Steel | Steel | 0000000 | 000000 |
Swivel Eye | ||||||||||||||
| M | 3/16" | Not Rated | 7/8" | 1 1/4" | 7/8" | 2 1/2" | 9/16" | 3/16" | __ | __ | Iron | Iron | 0000000 | 0000 |
| M | 5/16" | Not Rated | 1 5/16" | 1 5/8" | 1 5/16" | 3 5/8" | 3/4" | 1/4" | __ | __ | Iron | Iron | 0000000 | 00000 |
| M | 3/8" | Not Rated | 1 13/16" | 1 13/16" | 1 13/16" | 4 1/4" | 3/4" | 1/4" | __ | __ | Iron | Iron | 0000000 | 00000 |
| R | 1/4" | 400 | 1 1/4" | 1 1/2" | 1 1/4" | 3 1/4" | 9/16" | 1/4" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| R | 5/16" | 600 | 1 3/4" | 1 3/4" | 1 3/4" | 3 7/8" | 5/8" | 5/16" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| R | 3/8" | 1,000 | 2 1/4" | 2" | 2 1/4" | 5" | 13/16" | 5/16" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Swivel Latching Hook | ||||||||||||||
| P | 1/2" | 1,000 | 2" | 2 3/8" | 2" | 11 1/4" | __ | __ | 7/8" | 9/16" | Nylon Plastic | Nylon Plastic | 000000 | 000000 |
Mounted Pulleys for Rope—For Horizontal Pulling
Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Aluminum and nylon are lightweight and corrosion resistant. Stainless steel has the most corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | Housing Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Each | ||
Without Bearing | ||||||||||||||
| 1 | 1/4" | Not Rated | 11/16" | 7/8" | 1 7/8" | 1 1/8" | Bronze | Bronze | 2 | 5/32" | 1 3/8" | __ | 0000000 | 000000 |
| 1 | 1/4" | Not Rated | 11/16" | 7/8" | 1 7/8" | 1 1/8" | Steel | Steel | 2 | 5/32" | 1 3/8" | __ | 000000 | 00000 |
| 2 | 3/8" | Not Rated | 1 1/2" | 2 1/2" | 2 1/8" | 2 1/8" | Bronze | Bronze | 4 | 17/64" | 1 3/8" | 1 3/4" | 0000000 | 00000 |
| 2 | 3/8" | Not Rated | 1 1/2" | 2 1/2" | 2 1/8" | 2 1/8" | Steel | Steel | 4 | 17/64" | 1 3/8" | 1 3/4" | 000000 | 00000 |
| 3 | 1/4" | Not Rated | 1 1/8" | 3/4" | 3 1/8" | 13/16" | Steel | Steel | 2 | 3/16" | 2 1/2" | __ | 0000000 | 00000 |
| 3 | 1/4" | Not Rated | 1 1/8" | 3/4" | 3 3/16" | 13/16" | Aluminum | Aluminum | 2 | 3/16" | 2 1/2" | __ | 0000000 | 00000 |
| 3 | 5/16" | Not Rated | 1 3/8" | 3/4" | 3 5/8" | 13/16" | Aluminum | Aluminum | 2 | 3/16" | 2 7/8" | __ | 0000000 | 00000 |
| 3 | 5/16" | Not Rated | 1 3/8" | 13/16" | 3 9/16" | 13/16" | Steel | Steel | 2 | 3/16" | 2 7/8" | __ | 0000000 | 00000 |
| 3 | 3/8" | Not Rated | 1 1/2" | 1" | 3 11/16" | 1" | Steel | Steel | 2 | 3/16" | 3" | __ | 0000000 | 00000 |
| 4 | 1/4" | Not Rated | 1" | 1 5/8" | 1 5/8" | 3 1/2" | Iron | Iron | 4 | 11/64" | 1" | 1" | 000000 | 00000 |
| 4 | 5/16" | Not Rated | 1 1/4" | 1 5/8" | 1 5/8" | 4 5/16" | Iron | Iron | 4 | 11/64" | 1" | 1" | 000000 | 00000 |
| 4 | 3/8" | Not Rated | 1 1/2" | 2 3/16" | 2 3/16" | 4 5/8" | Iron | Iron | 4 | 1/4" | 1 3/16" | 1 3/16" | 000000 | 00000 |
| 5 | 3/8" | Not Rated | 1 1/2" | 7/8" | 2 15/16" | 2 1/16" | Steel | Steel | 2 | 15/64" | 2 1/8" | __ | 000000 | 00000 |
| 5 | 5/8" | Not Rated | 2 1/2" | 1 1/4" | 4 5/8" | 3 5/16" | Steel | Steel | 2 | 9/32" | 3 1/2" | __ | 000000 | 00000 |
| 6 | 5/16" | Not Rated | 1 3/8" | 7/8" | 2 9/16" | 1 13/16" | Steel | Steel | 2 | 13/64" | 1 13/16" | __ | 000000 | 0000 |
| 6 | 1/2" | Not Rated | 2" | 1 1/16" | 3 1/2" | 2 5/8" | Steel | Steel | 2 | 15/64" | 2 5/8" | __ | 000000 | 00000 |
| 8 | 1/2" | 1,750 | 2" | 7/8" | 2 3/4" | 2 1/2" | Nylon Plastic | Stainless Steel | 2 | 1/4" | 2 3/16" | __ | 0000000 | 00000 |
With Bearing | ||||||||||||||
| 7 | 3/8" | 1,100 | 2 3/16" | 15/16" | 3 1/8" | 2 13/16" | Nylon Plastic | Nylon Plastic | 2 | 1/4" | 2 3/16" | __ | 0000000 | 00000 |
Easy-Open Hanging Pulleys for Rope—For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it's easier to feed the rope through the housing—a free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Aluminum is more lightweight than stainless steel. Stainless steel is more corrosion resistant than aluminum.
For technical drawings and 3-D models, click on a part number.
| For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Material | Bearing Material | Each | |
Without Bearing | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Rigid Eye | |||||||||||
| 1/2" | Not Rated | 2" | 7/8" | 2" | 5" | 3/4" | 1/4" | Aluminum | __ | 0000000 | 000000 |
Swivel Eye | |||||||||||
| 1/2" | 1,500 | 3 1/4" | 1 13/16" | 3 1/4" | 8 3/4" | 15/16" | 1/2" | Stainless Steel | __ | 00000000 | 000000 |
| 5/8" | 2,500 | 4 1/4" | 2 5/16" | 4 1/4" | 10 1/4" | 15/16" | 1/2" | Stainless Steel | __ | 00000000 | 000000 |
With Bearing | |||||||||||
Rigid Eye | |||||||||||
| 5/8" | Not Rated | 2 3/8" | 1 1/16" | 2 3/8" | 4 1/2" | 15/16" | 1/4" | Aluminum | Steel | 0000000 | 000000 |
Hanging Pulleys for Rope—For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are used in applications where multiple pulleys move a single load, such as block and tackle systems. They can reduce the force needed to move the load by up to two times compared to single-groove pulleys.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Style A pulleys have a bracket on the bottom for tying off one end of a rope.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Hook Opening Wd. | Hook Thick. | Material | Specifications Met | Each | |
Single-Groove Without Bearing | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Swivel Latching Hook | ||||||||||||
| A | 1/2" | 2,000 | 2 1/4" | 1 1/8" | 2 1/4" | 11 7/16" | 15/16" | 1/16" | Steel | ASME B30.26 | 000000 | 0000000 |
Single-Groove With Bearing | ||||||||||||
Swivel Latching Hook | ||||||||||||
| B | 7/8" | 1,000 | 8" | 1 7/8" | 12 1/8" | 13" | 7/8" | 5/8" | Steel | __ | 000000 | 000000 |
| B | 1" | 1,000 | 10" | 2" | 14 3/8" | 15 1/4" | 7/8" | 5/8" | Steel | __ | 000000 | 000000 |
| B | 1" | 1,000 | 12" | 2" | 16 3/8" | 17 3/8" | 7/8" | 5/8" | Steel | __ | 000000 | 000000 |
Double-Groove Without Bearing | ||||||||||||
Swivel Latching Hook | ||||||||||||
| C | 1/2" | 3,000 | 2 1/4" | 2" | 2 1/4" | 12 5/16" | 1" | 3/4" | Steel | ASME B30.26 | 000000 | 000000 |
Easy-Open Hanging Pulleys for Rope—For Lifting
Also known as snatch blocks, these pulleys open so it's easier to feed the rope through the housing—a free rope end is not needed.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Machinable Pulleys
Customize the groove and bore to fit your application. The center of the pulley has a pilot hole so you can drill a bore to match a specific shaft size. Nylon is easy to machine yet resists impact and corrosion.