For Use On For Use On |
|---|
Type Type |
|---|
|
Container Size Container Size |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Approximate Coverage Approximate Coverage |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Approximate Coverage @ Thickness Approximate Coverage@ Thickness |
|---|
|
About Paint and Protective Coatings
More
Flame-Retardant Coatings for Wood
These coatings meet UL 723 and are rated Class A by ASTM E84—the highest rating available—for their ability to limit the spread of flames and generation of smoke. Use them on structural lumber, decking, and wood shingles. Apply with a brush, pad, roller, or sprayer. Reapply every five years on exterior wood; coatings protect interior wood indefinitely. Once fully cured, they can be painted over with water-based paint.
Dry Time | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, gal. | Composition | Approx. Coverage, sq. ft. | Touch, hrs. | Overall., hrs. | Application Temp. Range, °F | Max. Temp., °F | Specifications Met | For Use On | Color | Each | |
| 1 | Water Based | 125 | 2 | 48 | 40° to 130° | 130° | ASTM E84, UL 723 | Wood | Clear | 000000 | 000000 |
| 5 | Water Based | 625 | 2 | 48 | 40° to 130° | 130° | ASTM E84, UL 723 | Wood | Clear | 000000 | 000000 |
Flame-Retardant Coatings
These coatings meet UL 723 and are rated Class A by ASTM E84—the highest rating available—for their ability to limit the spread of flames and generation of smoke. Use them in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.
Clear coatings are frequently used on wood—use one coat on sealed wood and two on unsealed. They can be used outside without breaking down, but prolonged exposure to UV light may cause them to yellow.
White coatings are frequently used on walls, ceilings, doors, and stairwells.
Dry Time | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, gal. | Composition | Touch, hrs. | O'all, hrs. | Approximate Coverage @ Thickness | Mix Ratio | Application Time After Mixing, hrs. | Max. Temp., °F | Application Temp. Range, °F | Specifications Met | For Use On | Color (Appearance) | Each | |
Epoxy | |||||||||||||
| 1 | Water Based | 8 | 48 | 150 sq. ft. @ 10 mil | 100:26 | 2.5 | 250° | 40° to 100° | ASTM E84, UL 723 | Aluminum, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | Clear (Gloss) | 000000 | 0000000 |
| 1 | Water Based | 8 | 48 | 150 sq. ft. @ 10 mil | 100:20 | 2.5 | 300° | 40° to 100° | ASTM E84, UL 723 | Aluminum, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | White (Gloss) | 000000 | 000000 |
Flame-Retardant Coatings for Metal
These coatings meet UL 723 and are rated Class A by ASTM E84—the highest rating available—for their ability to limit the spread of flames and generation of smoke. Use them on structural steel beams and pipes. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.
Dry Time | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, gal. | Composition | Touch, hrs. | Overall, hrs. | Approx. Coverage @ Thick. | Application Time After Mixing, hrs. | Max. Temp., °F | Application Temp. Range, °F | Specifications Met | For Use On | Color (Appearance) | Each | |
| 1 | Water Based | 8 | 48 | 110 sq. ft. @ 15 mil | 2.5 | 300° | 40° to 100° | ASTM E84; UL 723 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Iron, Galvanized Iron, Galvanized Steel, Silver | White (Flat) | 000000 | 0000000 |
Flame-Retardant Paint Additives
Mix these additives with any water-based paint to create a flame-retardant surface. They meet UL 723 and are rated Class A by ASTM E84—the highest rating available—for their ability to limit the spread of flames and generation of smoke when they’re used on drywall. Use them on wood for a Class B rating. For interior use only.
One 16-fluid ounce bottle treats one gallon of latex, acrylic, or any other water-based paint.
| For Topcoat Composition | Container Size, fl. oz. | For Container Size, gal. | Specifications Met | Each | |
| Water Based | 16 | 1 | ASTM E84, UL 723 | 000000 | 000000 |