Threaded-Stud Knobs
Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Phenolic has good scratch resistance. Nylon has good wear resistance. Polypropylene has good impact resistance.
For technical drawings and 3-D models, click on a part number.
Head | Hub | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size  | Thread Pitch | Stud Lg. | Dia. | Ht. | Dia. | Ht. | Stud Material | Temperature Range, °F | 1-9 | 10-Up | |
Style 16—Five Arm Grip | |||||||||||
Black Nylon Plastic | |||||||||||
| 1/4"-20 | __ | 1" | 2 1/4" | 1/2" | 7/8" | 5/16" | Steel | -15° to 150° | 00000000 | 00000 | 00000 |
| M6 | 1mm | 30mm | 57mm | 20mm | 21mm | __ | Steel | -20° to 250° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 30mm | 57mm | 20mm | 21mm | __ | Steel | -20° to 250° | 00000000 | 0000 | 0000 |
Black Polypropylene Plastic | |||||||||||
| 1/4"-20 | __ | 1" | 1 1/4" | 7/16" | 3/4" | 5/16" | Steel | -15° to 200° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1 1/2" | 1 3/4" | 7/16" | 3/4" | 5/16" | Steel | -15° to 200° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 3/4" | 2 1/4" | 1/2" | 7/8" | 1/4" | Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1 1/2" | 1 1/4" | 7/16" | 3/4" | 5/16" | Steel | -15° to 200° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 2" | 1 3/4" | 7/16" | 3/4" | 3/4" | Steel | -15° to 200° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1" | 2 1/4" | 1/2" | 7/8" | 1/4" | Steel | -15° to 125° | 00000000 | 0000 | 0000 |
Style 17—Five Arm, Knurled Grip | |||||||||||
Black Phenolic Plastic | |||||||||||
| 1/4"-20 | __ | 1/2" | 1 3/16" | 7/16" | 13/16" | 3/8" | Stainless Steel | -30° to 400° | 0000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1/2" | 1 5/8" | 5/8" | 1 3/16" | 1/4" | Stainless Steel | -30° to 400° | 0000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 1 3/16" | 7/16" | 13/16" | 3/8" | Stainless Steel | -30° to 400° | 0000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 1 5/8" | 5/8" | 1 3/16" | 1/4" | Stainless Steel | -30° to 400° | 0000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 1 3/16" | 7/16" | 13/16" | 3/8" | Stainless Steel | -30° to 400° | 0000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 1 5/8" | 5/8" | 1 3/16" | 1/4" | Stainless Steel | -30° to 400° | 0000000 | 0000 | 0000 |
Comfort-Grip Threaded-Stud Knobs
A rubber coating provides a comfortable grip to position, tighten, and hold fixtures, equipment, and machinery. Mount these knobs into a threaded hole. Made of plastic, all resist oil, grease, and solvents.
For technical drawings and 3-D models, click on a part number.
Head | Hub | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch | Stud Lg. | Dia. | Ht. | Dia. | Ht. | Stud Material | Temperature Range, °F | 1-9 | 10-Up | |
Style 6—Five Arm Grip | |||||||||||
Black Rubber-Coated Polypropylene Plastic | |||||||||||
| 1/4"-20 | __ | 3/4" | 1 1/2" | 15/16" | 11/16" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 00000 | 00000 |
| 1/4"-20 | __ | 1" | 1 1/2" | 15/16" | 11/16" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1" | 1 7/8" | 15/16" | 15/16" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1" | 2 1/4" | 15/16" | 1 1/4" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1 1/4" | 1 1/2" | 15/16" | 11/16" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1 1/4" | 1 7/8" | 15/16" | 15/16" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1 1/4" | 2 1/4" | 15/16" | 1 1/4" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1" | 1 7/8" | 15/16" | 15/16" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1 1/2" | 1 1/2" | 15/16" | 11/16" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1 1/2" | 1 7/8" | 15/16" | 15/16" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1 1/2" | 2 1/4" | 15/16" | 1 1/4" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1" | 2 1/4" | 15/16" | 1 1/4" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1 1/2" | 1 1/2" | 15/16" | 11/16" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1 1/2" | 1 7/8" | 15/16" | 15/16" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1 1/2" | 2 1/4" | 15/16" | 1 1/4" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1 3/4" | 1 1/2" | 15/16" | 11/16" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1 3/4" | 1 7/8" | 15/16" | 15/16" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1 3/4" | 2 1/4" | 15/16" | 1 1/4" | 3/16" | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 25mm | 39mm | 23mm | 17mm | 5mm | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 25mm | 48mm | 23mm | 24mm | 4mm | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 25mm | 57mm | 24mm | 32mm | 4mm | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 25mm | 39mm | 23mm | 17mm | 5mm | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 25mm | 48mm | 23mm | 24mm | 4mm | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 25mm | 57mm | 24mm | 32mm | 4mm | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| M10 | 1.5mm | 30mm | 39mm | 23mm | 17mm | 5mm | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| M10 | 1.5mm | 30mm | 48mm | 23mm | 24mm | 4mm | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
| M10 | 1.5mm | 30mm | 57mm | 24mm | 32mm | 4mm | Zinc-Plated Steel | -15° to 210° | 00000000 | 0000 | 0000 |
Vibration-Resistant Threaded-Stud Knobs
Bonded to the stud is an acrylic adhesive that adds friction to resist loosening from vibration. Use these knobs to position, tighten, and hold fixtures, equipment, and machinery. They mount into a threaded hole. The studs have an outer layer of zinc that prevents the steel from rusting in wet areas.
Made of plastic, all of the knobs resist oil, grease, and solvents. For impact resistance, choose polypropylene knobs.
For technical drawings and 3-D models, click on a part number.
Head | Hub | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch | Stud Lg. | Dia. | Ht. | Dia. | Ht. | Stud Material | Temperature Range, °F | 1-9 | 10-Up | |
Five Arm Grip | |||||||||||
Black Polypropylene Plastic | |||||||||||
| M6 | 1 mm | 20mm | 44mm | 11mm | 19mm | 8mm | Zinc-Plated Steel | -20° to 125° | 00000000 | 00000 | 00000 |
| M6 | 1 mm | 20mm | 57mm | 12mm | 21mm | 7mm | Zinc-Plated Steel | -20° to 125° | 00000000 | 0000 | 0000 |
| M10 | 1.5 mm | 30mm | 57mm | 12mm | 21mm | 7mm | Zinc-Plated Steel | -20° to 125° | 00000000 | 0000 | 0000 |
Threaded-Hole Knobs
Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
Aluminum knobs have mild corrosion resistance, are lightweight, and are nonmagnetic.
Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Polypropylene has good impact resistance. Nylon has good wear resistance.
For technical drawings and 3-D models, click on a part number.
Thread | Head | Hub | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch | Dp. | Dia. | Ht. | Dia. | Ht. | Insert Material | Temperature Range, °F | 1-9 | 10-Up | |
Style 25—Five Arm Grip | |||||||||||
Black Polypropylene Plastic | |||||||||||
| 1/4"-20 | __ | 3/8" | 2 1/4" | 1/2" | 7/8" | 1/4" | Brass | -15 to 125° | 00000000 | 00000 | 00000 |
| 1/4"-20 | __ | 1/2" | 1 1/4" | 7/16" | 3/4" | 5/16" | Brass | -15 to 200° | 00000000 | 0000 | 0000 |
| 1/4"-20 | __ | 1/2" | 1 3/4" | 7/16" | 3/4" | 5/16" | Brass | -15 to 200° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 1 1/4" | 7/16" | 3/4" | 5/16" | Brass | -15 to 200° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 1 3/4" | 7/16" | 7/8" | 5/16" | Brass | -15 to 200° | 00000000 | 0000 | 0000 |
| 5/16"-18 | __ | 1/2" | 2 1/4" | 1/2" | 7/8" | 1/4" | Brass | -15 to 125° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1/2" | 2 1/4" | 1/2" | 7/8" | 1/4" | Brass | -15 to 125° | 00000000 | 0000 | 0000 |
Black Nylon Plastic | |||||||||||
| M6 | 1mm | 12mm | 57mm | 20mm | 21mm | __ | Brass | -20 to 250° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 12mm | 57mm | 20mm | 21mm | __ | Brass | -20 to 250° | 00000000 | 0000 | 0000 |
Style 26—Five Arm Grip | |||||||||||
Aluminum | |||||||||||
| M6 | 1mm | 15mm | 40mm | 13mm | 14mm | 13mm | __ | __ | 0000000 | 0000 | 0000 |
| M8 | 1.25mm | 15mm | 40mm | 13mm | 14mm | 13mm | __ | __ | 000000000 | 0000 | 0000 |
| M10 | 1.5mm | 18mm | 50mm | 16mm | 19mm | 16mm | __ | __ | 000000000 | 00000 | 00000 |
| M12 | 1.75mm | 22mm | 60mm | 20mm | 21mm | 20mm | __ | __ | 000000000 | 00000 | 00000 |
| M16 | 2mm | 28mm | 70mm | 23mm | 26mm | 23mm | __ | __ | 000000000 | 00000 | 00000 |
Comfort-Grip Threaded-Hole Knobs
A rubber coating provides a comfortable grip to position, tighten, and hold fixtures, equipment, and machinery. Install these knobs on a threaded stud. Made of plastic, all resist oil, grease, and solvents.
For technical drawings and 3-D models, click on a part number.
Thread | Head | Hub | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch | Dp. | Dia. | Ht. | Dia. | Ht. | Insert Material | Temperature Range, °F | 1-9 | 10-Up | |
Style 6—Five Arm Grip | |||||||||||
Black Rubber-Coated Polypropylene Plastic | |||||||||||
| 1/4"-20 | __ | 1/2" | 1 1/2" | 15/16" | 11/16" | 3/16" | Zinc-Plated Brass | -15° to 210° | 00000000 | 00000 | 00000 |
| 5/16"-18 | __ | 1/2" | 1 7/8" | 15/16" | 15/16" | 3/16" | Zinc-Plated Brass | -15° to 210° | 00000000 | 0000 | 0000 |
| 3/8"-16 | __ | 1/2" | 2 1/4" | 15/16" | 1 1/4" | 3/16" | Zinc-Plated Brass | -15° to 210° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 13mm | 39mm | 23mm | 17mm | 5mm | Zinc-Plated Brass | -15° to 210° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 13mm | 48mm | 23mm | 24mm | 4mm | Zinc-Plated Brass | -15° to 210° | 00000000 | 0000 | 0000 |
| M6 | 1mm | 13mm | 57mm | 24mm | 32mm | 4mm | Zinc-Plated Brass | -15° to 210° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 13mm | 39mm | 23mm | 17mm | 5mm | Zinc-Plated Brass | -15° to 210° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 13mm | 48mm | 23mm | 24mm | 4mm | Zinc-Plated Brass | -15° to 210° | 00000000 | 0000 | 0000 |
| M8 | 1.25mm | 13mm | 57mm | 24mm | 32mm | 4mm | Zinc-Plated Brass | -15° to 210° | 00000000 | 0000 | 0000 |
| M10 | 1.5mm | 13mm | 39mm | 23mm | 17mm | 5mm | Zinc-Plated Brass | -15° to 210° | 00000000 | 0000 | 0000 |
| M10 | 1.5mm | 13mm | 48mm | 23mm | 24mm | 4mm | Zinc-Plated Brass | -15° to 210° | 00000000 | 0000 | 0000 |
| M10 | 1.5mm | 13mm | 57mm | 24mm | 32mm | 4mm | Zinc-Plated Brass | -15° to 210° | 00000000 | 0000 | 0000 |
Threaded Through-Hole Knobs
Long shafts can thread through these knobs for mounting versatility. The knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
For technical drawings and 3-D models, click on a part number.
Thread | Head | Hub | Each | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Dp. | Dia. | Ht. | Dia. | Ht. | Set Screw Thread Size | 1-9 | 10-Up | |
Style 9—Five Arm Grip | |||||||||
Iron | |||||||||
| 5/8"-11 | 1 3/4" | 3" | 1/2" | 1 1/4" | 1 1/4" | __ | 0000000 | 000000 | 000000 |
| 3/4"-10 | 1 3/4" | 3 1/4" | 1/2" | 1 1/2" | 1 1/4" | __ | 0000000 | 00000 | 00000 |
Style 10—Five Arm Grip | |||||||||
Iron | |||||||||
| 5/8"-11 | 1 3/4" | 3" | 1/2" | 1 1/4" | 1 1/4" | 1/4"-20 | 0000000 | 00000 | 00000 |
| 3/4"-10 | 1 3/4" | 3 1/4" | 1/2" | 1 1/2" | 1 1/4" | 1/4"-20 | 0000000 | 00000 | 00000 |
Vibration-Resistant Threaded Through-Hole Knobs
Like locknuts, these knobs have a nylon insert that grips threads to resist loosening. Long shafts can thread through these knobs for mounting versatility. Use the knobs as a grip to position, tighten, and hold fixtures, equipment, and machinery. Made of plastic, all resist oil, grease, and solvents.
For technical drawings and 3-D models, click on a part number.
Thread | Head | Hub | Each | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Dp. | Dia. | Ht. | Dia. | Ht. | Insert Material | Temperature Range, °F | 1-9 | 10-Up | |
Style 2—Five Arm Grip | ||||||||||
Black Polypropylene Plastic | ||||||||||
| 1/4"-20 | 5/16" | 1 1/4" | 7/16" | 3/4" | 3/4" | Zinc-Plated Steel | -15° to 125° | 00000000 | 00000 | 00000 |
| 1/4"-20 | 5/16" | 1 3/4" | 7/16" | 3/4" | 3/4" | Zinc-Plated Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 1/4"-20 | 5/16" | 2 1/4" | 1/2" | 7/8" | 1/4" | Zinc-Plated Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 5/16"-18 | 3/8" | 1 1/4" | 7/16" | 3/4" | 5/16" | Zinc-Plated Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 5/16"-18 | 3/8" | 1 3/4" | 7/16" | 3/4" | 3/4" | Zinc-Plated Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 5/16"-18 | 3/8" | 2 1/4" | 1/2" | 7/8" | 1/4" | Zinc-Plated Steel | -15° to 125° | 00000000 | 0000 | 0000 |
| 3/8"-16 | 7/16" | 2 1/4" | 1/2" | 7/8" | 1/4" | Zinc-Plated Steel | -15° to 125° | 00000000 | 0000 | 0000 |
Quick-Lock Threaded Through-Hole Knobs
Quick to install, position, and remove, these knobs have an angled hole that allows you to tilt the knob to slide it over threads, then straighten it to grip the threads and secure the knob. They provide a firm grip to position, tighten, and hold fixtures, equipment, and machinery.
Phenolic knobs are a lightweight alternative to steel knobs. They resist oil, grease, solvents, and scratches.
For technical drawings and 3-D models, click on a part number.
Thread | Head | Hub | Each | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Dp. | Dia. | Ht. | Dia. | Ht. | Threading | Temperature Range, °F | 1-9 | 10-Up | |
Five Arm Grip | ||||||||||
Black Phenolic Plastic | ||||||||||
| 1/2"-13 | 7/8" | 1 11/16" | 5/8" | 1 3/16" | 1/4" | Fully Threaded | -30° to 400° | 0000000 | 00000 | 00000 |
Unthreaded-Hole Knobs
Tap custom threads or secure with a set screw to provide a firm grip to position, tighten, and hold fixtures, equipment, and machinery.
Aluminum knobs have mild corrosion resistance, are lightweight, and are nonmagnetic.
Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Phenolic has good scratch resistance.
For technical drawings and 3-D models, click on a part number.
Hole | Head | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Dp. | Dia. | Ht. | Dia. | Ht. | Insert Material | Temperature Range, °F | Set Screw Included | 1-9 | 10-Up | |
Style 9—Five Arm Grip | |||||||||||
Aluminum | |||||||||||
| 8mm | 15mm | 40mm | 13mm | 14mm | 13mm | __ | __ | __ | 000000000 | 00000 | 00000 |
| 10mm | 18mm | 50mm | 16mm | 19mm | 16mm | __ | __ | __ | 000000000 | 00000 | 00000 |
| 12mm | 22mm | 60mm | 20mm | 21mm | 20mm | __ | __ | __ | 000000000 | 00000 | 00000 |
| 16mm | 28mm | 70mm | 23mm | 26mm | 23mm | __ | __ | __ | 000000000 | 00000 | 00000 |
Style 10—Five Arm Grip | |||||||||||
Black Phenolic Plastic | |||||||||||
| 1/4" | 7/16" | 1 5/8" | 5/8" | 1 3/16" | 1/4" | Brass | -30° to 400° | Yes | 0000000 | 0000 | 0000 |
Screw-Head Mount Knobs
To build a custom knob or thumb screw, pair one of these knobs with a hex or socket head screw and press the knob and screw together. All of these knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Made of plastic, they resist oil, grease, and solvents. Use color to identify equipment controls and components at a glance.
For technical drawings and 3-D models, click on a part number.
Head | |||||||
|---|---|---|---|---|---|---|---|
| For Screw Size | Dia. | Ht. | Temperature Range, °F | Color | Pkg. Qty. | Pkg. | |
Style 6—Five Arm Grip | |||||||
Polypropylene Plastic—For Hex Head Screws | |||||||
| No. 10 | 1 1/4" | 3/4" | -40° to 125° | Black | 10 | 000000000 | 000000 |
Machinable-Hub Knobs
Mill specific holes or keyways in the hub to meet your specifications, or weld in place. These knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.
For technical drawings and 3-D models, click on a part number.
Unthreaded Through-Hole Knobs
Create custom threads or secure with a set screw to provide a firm grip to position, tighten, and hold fixtures, equipment, and machinery. Long shafts can pass through these knobs for mounting versatility.
Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Nylon has good wear resistance.
For technical drawings and 3-D models, click on a part number.