Also known as spiral-wound gaskets, these have a carbon steel outer ring and a 304 stainless steel inner sealing element with a graphite-based filler.

A space between the outer ring and the sealing element prevents the element from being squeezed inward and contaminating the process line.

Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.

These blended carbon/Buna-N rubber gaskets are unaffected by oil and temperatures up to 650° F.

Also known as Gore GR.

Made of soft expanded PTFE, these gaskets are reinforced with a stainless steel insert for added strength. They can hold their shape better than gaskets without an insert.

These pure PTFE gaskets have a slippery surface that prevents sticking.

A stainless steel insert in these PTFE gaskets adds strength and makes them reusable.

Also resistant to salt water.

The all-SBR rubber construction of these gaskets provides better abrasion resistance than blended aramid/SBR gaskets.

These compressible Buna-N rubber gaskets ensure a tight seal. They also resist water and salts.

Made of Buna-N rubber, these gaskets compress to ensure a tight seal. They resist oil, water, and salts.

These blended aramid fiber/Buna-N rubber gaskets also resist water and aliphatic hydrocarbons such as ethylene.

Also known as Gore GR.

Use these gaskets, also known as Gore UPG, with cast iron flanges.

Made of pure PTFE, these gaskets have a slippery surface that prevents sticking.

Made of EPDM rubber, these gaskets also resist salt water.

Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.

Resistant to water and salts, these silicone rubber gaskets can handle temperatures up to 450° F.

These gaskets meet Fed. Std. Class 10,000 and ISO Class 7 clean room requirements.

These gaskets have a perforated plate to filter, separate, and strain liquids or dry materials in your line.

Made of PTFE, these gaskets are chemically inert (except to molten alkali metal and elemental fluorine).

If a piece wears off, fragments as small as 1 mm can be picked up by a metal-detection system to prevent contamination of your process line.

These gaskets meet Fed. Std. Class 10,000 and ISO Class 7 clean room requirements.

Offering excellent resistance to detergents, hydraulic fluid, and salts, these PTFE gaskets have a corrosion-resistant 316 stainless steel screen to provide inline straining.

These gaskets meet Fed. Spec. Class 10,000 and ISO Class 7 clean room requirements.

In addition to oil, these Buna-N gaskets resist water and salts.

Made from a blend of PTFE and 316 stainless steel, these gaskets stand up to the harsh chemicals and high pressures and temperatures used in sanitary processes.

These gaskets resist swelling when they come into contact with oil.

If a piece wears off, fragments as small as 1 mm can be picked up by a metal-detection system to prevent contamination of your process line.

Use these perforated gaskets to filter liquids and dry materials, as well as create a tight seal in quick-clamp stainless steel sanitary tube fittings. Made of silicone, they handle temperatures up to 450° F, so they’re good for heated ingredients and clean-in-place (CIP) processes.

Because this expanded PTFE tape is thicker than other gasket tape, it fills the irregularities on rough-surfaces flanges when compressed for a tight seal.

These gasket makers combine the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement.

Dispense a uniform bead when you press the nozzle.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These gasket makers combine oil resistance and the flexibility to accommodate movement.

Dispense a uniform bead when you press the nozzle.

These gasket makers come in a tube.

Push the plunger to precisely dispense small amounts.

All the benefits of a gasket maker in a no-drip form.

Dispense a uniform bead when you press the nozzle.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Form rigid seals on plumbing connections and duct.

These adhesives come in a tube.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Form bonds that will not degrade in the presence of oils and fuels.