Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance.

Precision Flanged Ball Bearings

When speed and accuracy matter most, opt for these bearings. They’re made to tighter tolerances than standard flanged ball bearings.

Self-Aligning Flanged Ball Bearings

No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment.

Set Screw Collar Ball Bearings

Slip these bearings onto a shaft and secure with the included set screws, no special tools required.

Flanged Ultra-Thin Ball Bearings

Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.

Mounted Ball Bearings with Two-Bolt Flange

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

Low-Profile Mounted Ball
Bearings with Two-Bolt Flange

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Light Duty Mounted Ball Bearings with Two-Bolt Flange

Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants.

High-Temperature Mounted Ball
Bearings with Two-Bolt Flange

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.

Ultra-Corrosion-Resistant Mounted
Ball Bearings with Two-Bolt Flange

Use these bearings in corrosive environments and under water.

High-Speed Mounted Ball
Bearings with Two-Bolt Flange

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

Food Industry Mounted Ball
Bearings with Two-Bolt Flange

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Washdown Mounted Ball Bearings with Two-Bolt Flange

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.

Permanently Lubricated Washdown
Mounted Ball Bearings with Two-Bolt Flange

Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.

Mounted Bearings with Four-Bolt Flange

Mounted Ball Bearings with Four-Bolt Flange

A bolt in each corner makes for a secure, even hold.

High-Temperature Mounted Ball
Bearings with Four-Bolt Flange

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.

High-Speed Mounted Ball
Bearings with Four-Bolt Flange

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

Food Industry Mounted Ball
Bearings with Four-Bolt Flange

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Permanently Lubricated Washdown Mounted
Ball Bearings with Four-Bolt Flange

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.

Ultra-Corrosion-Resistant Mounted
Ball Bearings with Four-Bolt Flange

Use these bearings in corrosive environments and under water.

Washdown Mounted Ball
Bearings with Four-Bolt Flange

With a four-bolt flange for mounting and an IP69K certification approving them for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.

Insert Bearings

Swap out worn inserts instead of replacing the entire mounted unit.

Mounted Bearings with Three-Bolt Flange

With all three mounting holes on one side, you can position the bearing above or below the mounting surface.

Mounted Linear Bearings

Flange-Mounted Linear Ball Bearings

The flanged housing makes these bearings a good solution for vertical linear motion applications.

Corrosion-Resistant Flange-Mounted
Linear Ball Bearings

The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.

Mounted Linear Bearings for Spline Shafts

A flanged housing with mounting holes connects these bearings directly to your system. They have a grooved inner diameter that's designed to work with spline shafts. Together, they transmit rotary power while allowing the bearing to move freely along the length of the shaft.

Roller Conveyors

Ball Bearings for Conveyor Rollers

Replace worn and damaged bearings or press-fit bearings into tubing or pipe to create a roller.

Ball Bearings with Axle for Conveyor Rollers

Use these bearings to replace worn and damaged bearings or press-fit them into tubing or pipe create a roller. All have a hex-shaped axle.

Speed Reducers for Roller Conveyors

Also known as pallet brakes, these mount underneath rollers on a gravity conveyor and create friction on the rollers to control the conveyor's speed.

Ball Screws and Nuts

Also known as single-start ball screws and nuts, these have a single thread that runs the length of the screw. They operate with more torque than fast-travel ball screws and nuts.

Corrosion-Resistant Ball Screws and Nuts

Also known as single-start ball screws and nuts, these have a single thread that runs the length of the screw. They operate with more torque than fast-travel ball screws and nuts.

Self-Stopping Ball Screws and Nuts

Keep your ball screw spinning without the ball nut damaging your system. When the ball nut reaches the stop pin at either end of the ball screw, it disengages and begins to idle.

Fast-Travel Corrosion-Resistant Ball Screws and Nuts

Multiple thread channels (also known as thread starts) create faster linear travel than ball screws with a single thread start.

Fast-Travel Ball Screws and Nuts

Multiple thread channels (also known as thread starts) create faster linear travel than ball screws with a single thread start.

Metric Precision Ball Screws and Nuts

Precision cut threads make these metric ball screws approximately four times more accurate than standard ball screws. Use them when exact positioning is essential.

Metric Ball Screws and Nuts

Internal ball bearings provide smooth low-friction travel in applications that require high speeds, accurate positioning, and repeatable movement. Also known as single-start metric ball screws and nuts, these have a single thread that runs the length of the screw.

Metric Fast-Travel Ball Screws and Nuts

With multiple thread starts, these metric ball screws create linear travel that’s approximately three times faster than ball screws with a single thread start. They’re ideal for applications with an actuator.