Illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to direct light where needed.

Style A have built-in LEDs that last longer, are more efficient, and generate less heat than other technologies. These fixtures produce a cool light appearance, which highlights white/blue tones creating good visibility at night. They can be hardwired to operate on any of the voltages listed.

Style B work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with an aluminum housing resist corrosion better than those with a zinc housing. Lights with a zinc housing are more impact resistant than those with an aluminum housing.

No need for wiring—these lights plug-in with a three-prong plug. Use these fixtures to illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to any angle to direct light where needed. Lights work with LED, CFL, halogen, and incandescent bulbs (sold separately). They cannot be sold to California due to local energy efficiency requirements.

Heads adjust to any angle to direct light where needed. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. These lights work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Mount these lights on a pole to illuminate pedestrian areas such as streets and walkways. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other technologies. They produce a neutral white light. All include hardware for mounting to poles with 1 5/8" and 2 3/8" OD.

Adjust the head to any angle to direct light where needed. Mount these lights to a wall (hardware included) or a pole (pole mounting bracket sold separately). These security lights have a halogen bulb, which emits a warm yellow light. They also have a lens visor that reduces glare and a prismatic lens that disperses light evenly.

Heads adjust to any angle to direct light where needed. These lights automatically turn on when the sensor detects motion. Lights turn off when an area is unoccupied.

Lights with built-in LEDs last longer, are more efficient, and generate less heat than other technologies.

Style A produce a neutral white light. They detect motion up to 70 feet away.

Style B detect motion up to 70 feet away. They are compatible with LED, CFL, halogen, and incandescent bulbs (sold separately).

Style C are battery-operated—use where you don't have access to electricity. These lights emit a cool light appearance, which highlights white/blue tones creating good visibility at night. They detect motion up to 30 feet away.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces. They turn on when they detect motion. These lights use a built-in LED bulb that lasts longer, is more efficient, and generates less heat than alternatives.

The solar panel is separate from style A, B, and C lights, so you can place the panel in direct sunlight while mounting the light in a shaded area. Even though they’re detached from the panel, these lights have an integrated sensor that prevents them from turning on during the day.

These floodlights have heads that swivel and rotate for perfect positioning in hard-to-light areas. Their built-in LEDs last longer, are more efficient, and generate less heat than other light technologies. They cast a cool light that highlights white/blue tones, which is good for inspecting. You can control them remotely with your Bluetooth-enabled smartphone.

Style A has a built-in handle and a removable carrying strap.

Style B has a retractable handle and wheels for easy transport. In addition to cordless operation, this floodlight can be plugged in. Batteries must be charged with the case lid open.

Rated IP65, these lights are sealed to protect against light washdowns from a garden hose. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed. The light heads are detachable, so you can bring light into areas where the stand won't fit. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. All have tempered glass lenses to protect the LEDs.

This IP67 rated light withstands temporary submersion in a maximum of one meter of water for up to 30 minutes. It's compact for easy transport to job sites with no electrical power. With a head that adjusts up and down, it floods your job site with light. It has a hook and a magnet for mounting, so you can keep your hands free for other work. This light has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. It has a durable tempered-glass lens to protect the LEDs.

Note: Battery life is significantly reduced when lights are used at the high-beam setting.

The handle on this floodlight also acts as a stand—pivot it 360° to aim light where it's needed. This floodlight is small and easy to carry to job sites that don't have electrical power service. It has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a cool light that highlights white/blue tones, which is good for inspecting. This light has an impact-resistant plastic lens to protect the LEDs.

Compact and easy to carry, these IP65-rated lights stand up to dust and low-pressure jets of water. The head adjusts up and down as well as side to side to direct light where it's needed. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a cool light that highlights white/blue tones, which is good for inspecting. They also have a durable tempered-glass lens to protect the LEDs.

For technical drawings and 3-D models, click on a part number.

Use sun energy to bring light to remote areas and storage spaces without electrical wiring. These lights come with a solar panel to recharge their battery. Simply connect the lights to the panel and place the panel in full sunlight to charge. To power the battery faster, you can also plug these lights into a charger using the included USB cable. A USB output port allows you to power other smart devices and accessories with these lights, as well.

All lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a neutral light appearance that’s often found in workspaces. An impact-resistant plastic lens protects the LEDs. You can dim these lights to conserve battery life. To use them as a security light in unsupervised areas at night, set them to auto mode—they’ll turn on automatically in the dark or when they detect motion.

Use the included mounting holes and brackets to secure these lights permanently to the wall, or hang them temporarily with the included fold-out D-rings. The solar panel also has a mounting bracket to secure the panel to horizontal and vertical surfaces. It’s adjustable, so you can rotate and tilt the panel to achieve the best angle for maximum sunlight exposure.

These lights cannot be sold to Canada due to energy efficiency regulations.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use. All of the lights have a hook for hanging when you need both hands for other work.

Style C lights are furnished with an incandescent bulb and an impact-resistant plastic lens.

Hang these lights where you need them on the job site.

Style J come with a replaceable incandescent bulb. They have an impact-resistant plastic lens to protect the bulb.

Style N are compatible with medium-base screw-in CFL (compact fluorescent), incandescent, and LED bulbs (sold separately). They accommodate a spot or flood bulb.

This light is sealed to withstand shallow water, such as ponds and fountains. It has a durable tempered-glass lens to protect the bulb. It's furnished with a halogen bulb that casts a warm, yellow-toned light that's similar in apprearance to incandescent lights.

Mount these lights onto your vehicle.

Lights that meet IP69K are protected against dust, pressure, and steam.

Lights that meet IP67 are protected against dust and temporary immersion in water. Those that also meet SAE J593—an international standard for backup lights—are designed for use with your backup cameras.

A handle control lets you aim this light from inside your vehicle to illuminate any spot. It rotates 360° horizontally and 180° vertically. It has a fingertip on/off switch and includes a roof bracket and mounting template.