Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.

These dual-material foam sheets have ultra-soft polyurethane foam on one side and chemical-resistant polyethylene foam on the other. They are widely used in packaging applications to absorb shock and damp vibration.

Also known as Ethafoam.

These sheets are made of cross-linked polyethylene, so they are stronger and more chemical resistant than other types of polyethylene foam.

Exceptionally strong, this lightweight ionomer foam offers excellent resistance to impact, UV light, and water. It stands up to wear caused by rubbing and scraping and is often used on bumpers and buoys.

The open top allows these foam U-channels to slide over and cushion an edge.

There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required.

EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.

Just like the material found in wetsuits, these neoprene foam sheets are encased in nylon fabric for additional protection from wear caused by rubbing and abrasion.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

These vinyl foam sheets and strips are so conformable that once they're compressed they won't fully spring back. Use them to fill gaps and seal uneven surfaces.

An economical alternative to neoprene foam, these Santoprene foam cords stand up to water, sunlight, and oxidation but lack oil resistance.

Neoprene is blended with EPDM and polyethylene for foam tubes that offer good resistance to water, sunlight, and oxidation.

Silicone maintains its flexibility across a wide range of temperatures.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

One layer of fiberglass fabric is sandwiched between layers of silicone foam giving these strips strength to handle high-stress applications, such as gasketing.

Even after extended compression, these sheets and strips will bounce back to shape.

Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.

Protect sensitive equipment from heat buildup with this silicone foam. These sheets are commonly used to fill gaps and damp vibration in computers, battery installations, and pipe assemblies.

These silicone foam cords meet NSF/ANSI 51 for food equipment materials. Use them to seal and cushion narrow spaces in food service equipment.

Seal and damp vibration in high-temperature equipment with these rings.

Protect electronic components from electrostatic shocks and chemicals while safeguarding them from bumps and drops during shipping and storing.

These polyurethane foam egg-crate sheets divert static electricity to protect sensitive equipment from damage.

An economical alternative to Viton® fluoroelastomer foam, these semi-rigid nylon foam sheets offer good resistance to a wide range of chemicals.

This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.

Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.

Similar to a sponge, this open-cell foam absorbs and holds up to 30 times its weight in liquid.

Also known as egg crate, these sheets have peaks and valleys that absorb more sound at higher frequencies than flat-surface sheets. Use them to quiet noisy areas and line machine enclosures. Sheets are made of humidity-resistant polyurethane foam.

The foil facing reflects heat. Use these sheets to quiet noisy areas and line machine enclosures. They’re made of humidity-resistant polyurethane foam.

These polypropylene foam sheets will not degrade if exposed to moisture and occasional salt water spray. Use them to quiet noisy areas and line machine enclosures.

The best sound absorbers of all our rigid sheets, use to quiet noisy areas in your facility. They're peaked on one side for more sound-absorbing area than flat sheets. Made of melamine, they have an acrylic resin finish that resists dust and dirt and wipes clean.

These seals are made of solid EPDM foam rubber.

It’s the hollow construction that makes these seals more compressible than solid seals. Made of silicone foam rubber, they also resist water and salts.

These seals have solid construction.

The foam core makes these vinyl rubber seals firmer and more durable than hollow seals. They also resist salts and detergents.

Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines.

These rigid, lightweight melamine foam tubes are wrapped in an ISO Class 5 (Class 100) clean room jacket that is suitable for sanitary and washdown applications. They’re typically used on cold and hot water piping and with refrigeration systems.

This very rigid insulation offers the lowest heat-flow rate of our pipe insulation and restricts absorption of water, air, and gas. It is typically used in process piping and chiller plants and performs best in applications below 50° F.

Made of rugged PVC foam, these rigid sheets absorb impact and restrict the absorption of water, air, and gas. Use in applications with operating temperatures below 32° F.

The lowest-density insulation we offer, these sheets are made of lightweight melamine foam.

The fiberglass facing on these flexible silicone foam sheets protects against highly abrasive conditions and resists tearing.

This two-part expanding foam insulation meets ASTM E84 20/400 for flame and smoke and covers large areas.

Expanding quickly to fill large voids, this foam insulation begins to harden in 4 minutes and can be cut within 10 minutes.

Mix these two-part foam casting compounds and pour into your mold—they expand to fill every hole and cavity you pour them into. Because they're foam, they're lighter weight than other casting compounds.

Black and yellow stripes create a visual alert to draw attention to equipment and obstructions. Designed to cushion during impact, this foam trim protects edges on posts, shelving, and other surfaces from damage.

This trim withstands temperatures up to 450° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Cut these grips to your desired length. All have two open ends to position them anywhere along a handle.

Made of vinyl foam, these grips insulate and cushion vibration. They are grooved to conform to your fingers for a comfortable, secure grasp. Slide them onto a round tool handle and use the eye to hang them.

Use the hook-and-loop closure to secure these grips anywhere on a handle—even those where the ends are not accessible such as on carts, drawers, and machine doors.

Six times thicker than standard wrap-on grips, these cushioned grips are made of EPDM foam to insulate and cushion vibration.

Stick these gaskets around door and vent cutouts or replace worn seals to maintain your enclosure's NEMA rating.

This material is made of expanded PTFE. It is more compressible than pure PTFE to ensure a tight seal.

Also known as Gore GR.

Reinforced with a stainless steel insert, these gaskets are stronger and can hold their shape better than gaskets without an insert.

Also known as Gore GR.

Made of soft expanded PTFE, these gaskets are reinforced with a stainless steel insert for added strength. They can hold their shape better than gaskets without an insert.

Fit these gaskets over connectors that plug in to your enclosure to absorb interference and prevent signal problems.

Tape is cut into convenient discs and rectangles.

Mount lightweight signs and trim with this economical tape.

The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.

Repair ceiling tiles and pass-through windows in clean rooms with this foam tape with adhesive on both sides.

Create strong, permanent bonds that can replace mechanical fasteners.

The acrylic adhesive on this tape sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.

This tape can withstand temperatures up to 300° F.

Use these clear sheets for strong, invisible bonds.

Use these clear shapes for strong, invisible bonds.

Foam damps vibration while securing lightweight objects, such as nameplates, dispensers, and smoke alarms. This tape has a tacky adhesive on one side and a permanent adhesive on the other.

Stop water penetration with this tacky, flexible tape. It conforms to irregular shapes and expands to fill gaps. Use it on freezers, windows, and in marine applications.

Add a slippery surface to difficult-to-bond surfaces, such as plastic, foam, and powder-coated metal.

Backed with 3M VHB 4941 foam adhesive for strength, padding, and vibration resistance.

Protect impact-prone surfaces from scratches, chips, and abrasion with this thick, conformable tape.

You only need one free hand to tear a sheet of wrap from the box.

Create custom-fitted packaging for products of almost any size or shape. When activated, foam packs expand to fill the space around items.

Guide peanuts into a shipping container. A valve controls the flow.

Good for food preparation areas, these earplugs have an enclosed ball bearing that can be sensed by metal detectors.