About Selecting Thermal Insulation
More
Wash Guns with Solution Bottle

Connect these guns to your garden hose and automatically dispense solution from the attached bottle instead of dragging around a siphon hose. Use the attachment to adjust the spray pattern from mist to solid stream.
Foam gun creates thick foam. Gun mixes up to 12 oz. of foaming chemicals per gallon of water.
Pressure, psi | Bottle | Inlet | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gun Type | Max. Flow Rate | Min. | Max. | Max. Temp., °F | Mixing Head Material | Cap., oz. | Material | Inlet Connection Adjustability | Hose Size | Thread Type | Gender | Features | Each | |
Foam | 1.5 | 40 | 60 | 100° | Brass | 32 | Plastic | Fixed | 3/4 | GHT | Female | Insulated Body | 0000000 | 000000 |
Void-Filling Spray Foam Insulation
Seal and insulate cracks, gaps, and other hollow spaces with this insulation.
Insulation that covers 1.2 cu. ft. is best for touch-up and repair jobs.
Insulation that covers 12.3 cu. ft. sprays farther and more thoroughly than other foam insulation. Use them to fill cavities, channels, framing, and hollow tubing.
Insulation that covers 12 cu. ft. comes out in a smooth line, so they're useful for filling and sealing gaps to prevent airflow.
Insulation that covers 5 or 9.6 cu. ft is good for applications that require firmness, such as roofing and where there’s foot traffic. It comes out smooth, so you won’t need to add extra layers or smooth it yourself. The included snap-tip nozzles spray in either a fan or cone pattern.
Cleaners for dispensing guns (sold separately) extend the life of dispensing guns.


- Temperature Range: -200° to 240° F
- Heat Flow Rate: See table
- Density: See table
- Color: Beige
Insulation | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container | Dispensing Guns | Cleaners for Dispensing Guns | ||||||||||||
Net Weight, lbs. | Type | Approximate Coverage, cu. ft. | Begins to Harden, min. | Reaches Full Strength, hrs. | Heat Flow Rate | Density, lbs./cu. ft. | Includes | Specifications Met | Each | Each | Each | |||
4 | Can | 1.2 | 5 | 1 | 0.16 Btu @ 75° F | 2.11 | Two Cans of Foam with Two Cone Spray Nozzles | __ | 0000000 | 000000 | 000000 | 00 | 000000 | 00 |
16 | Cylinder | 12.3 | 5 | 24 | 0.2 Btu @ 75° F | 1.3 | One Cylinder with Two Trigger-Style Wands | ASTM E84 5/20 for Flame and Smoke | 0000000 | 000000 | 000000 | 00 | 000000 | 00 |
30 | Cylinder | 12 | 2 | 24 | 0.16 Btu @ 75° F | 2.5 | Two Cylinders with a Trigger-Style Gun and Ten Cone Spray Nozzles | ASTM E84 0/45 for Flame and Smoke | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |

- Temperature Range: -200° to 200° F
- Heat Flow Rate: 0.16 Btu @ 75° F
- Density: 3.1 lbs./cu. ft.
- Color: Beige
Container | |||||||
---|---|---|---|---|---|---|---|
Net Weight, lbs. | Type | Approximate Coverage, cu. ft. | Begins to Harden, min. | Reaches Full Strength, hrs. | Includes | Each | |
15 | Cylinder | 5 | 5 | 1 | Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles | 0000000 | 0000000 |
30 | Cylinder | 9.6 | 5 | 1 | Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles | 0000000 | 000000 |
Snap-Tip Replacement Nozzles | 00000000 | Each | 00000 |
Flame-Retardant Void-Filling Spray Foam Insulation

- Temperature Range: -200° to 240° F
- Heat Flow Rate: 0.154 Btu @ 75° F
- Density: 1.75 lbs./cu. ft.
- Color: Beige
- Specifications Met: ASTM E84 10/350 for Flame and Smoke
This two-part expanding foam insulation meets ASTM standards for flame and smoke and covers large areas. It can be cut after 5 minutes and reaches full strength in an hour. To use outdoors, paint or cover for UV resistance. The included snap-tip nozzles spray in either a fan or cone pattern.
Spray Foam Insulation | Snap-Tip Replacement Nozzles | ||||||||
---|---|---|---|---|---|---|---|---|---|
Container Net Weight, lbs. | Approximate Coverage, cu. ft. | Begins to Harden, min. | Reaches Full Strength, hrs. | Useful Life | Includes | Each | Each | ||
15 | 7.7 cu. ft. | 5 | 1 | Reusable | Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles | 0000000 | 0000000 | 00000000 | 00000 |
30 | 14.9 cu. ft. | 5 | 1 | Reusable | Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles | 0000000 | 000000 | 00000000 | 0000 |
Spray Foam Insulation


- Temperature Range: -200° to 240° F
- Heat Flow Rate: 0.2 Btu @ 72° F
- Density: See table
- Color: See table
Fill cracks with this single-use can of expanding foam insulation. It hardens enough to be cut in one hour and reaches full strength in 24 hours.
Dispensing guns (sold separately) are required for the 24oz. cans of black foam insulation.
Cleaners for dispensing guns (sold separately) extend the life of dispensing guns.
Insulation | Dispensing Guns | Cleaners for Dispensing Guns | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Net Wt., oz. | Approximate Coverage | Begins to Harden, hrs. | Reaches Full Strength, hrs. | Useful Life | Density, lbs./cu. ft. | Color | Includes | Specifications Met | Each | ||||||
For Walls and Ceilings | |||||||||||||||
12 | 16 sq. ft. (1/2" bead) | 1 | 24 | One-Time Use | 1.1 | Black | One Dispensing Tube | ASTM E84 25/50 for Flame and Smoke | 0000000 | 00000 | 00 | 000000 | 00 | 000000 | 00 |
Each | |||||||||||||||
1-11 | 12-Up | ||||||||||||||
12 | 16 sq. ft. (1/2" bead) | 1 | 24 | One-Time Use | 1.2 | Beige | One Dispensing Tube | ASTM E84 25/50 for Flame and Smoke | 0000000 | 00000 | 000000 | 000000 | 00 | 000000 | 00 |
24 | 32 sq. ft. (1/2" bead) | 1 | 24 | One-Time Use | 1.2 | Beige | One Dispensing Tube | ASTM E84 25/50 for Flame and Smoke | 0000000 | 00000 | 00000 | 000000 | 00 | 000000 | 00 |
Each | Each | Each | |||||||||||||
24 | 36 sq. ft. (1/2" bead) | 1 | 24 | One-Time Use | 1 | Black | __ | ASTM E84 25/50 for Flame and Smoke | 0000000 | 00000 | 00 | 0000000 | 000000 | 0000000 | 000000 |
Each | |||||||||||||||
1-11 | 12-Up | ||||||||||||||
For Windows and Doors | |||||||||||||||
24 | 32 sq. ft. (1/2" bead) | 1 | 24 | One-Time Use | 1.2 | Beige | One Dispensing Tube | ASTM E84 25/50 for Flame and Smoke, AAMA 812-04 | 0000000 | 00000 | 00000 | 000000 | 00 | 000000 | 00 |
Fireblock Spray Foam Insulation


- Temperature Range: -200° to 240° F
- Heat Flow Rate: 0.2 Btu @ 72° F
- Density: See table
- Color: Orange
Often used around electrical outlets and plumbing openings, this foam insulation helps prevent flames and smoke from spreading between walls and floors. It’s orange so inspectors will easily recognize it as fireblock. Rated UL 2818, also known as GREENGUARD Certified, it’s been tested to meet strict limits on VOC (volatile organic compound) emissions.
Cleaners for dispensing guns (sold separately) extend the life of dispensing guns.
Dispensing guns (sold separately) are required for the 24 oz. can of insulation.
Insulation | Dispensing Guns | Cleaners for Dispensing Guns | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Net Wt., oz. | Approximate Coverage | Begins to Harden, min. | Reaches Full Strength, hrs. | Useful Life | Density, lbs./cu. ft. | Includes | Specifications Met | Each | Each | Each | |||
12 | 16 sq. ft. (1/2" bead) | 5 | 24 | One-Time Use | 1.1 | One Dispensing Tube | ASTM E84 25/50 for Flame and Smoke, UL 2818 | 0000000 | 000000 | 000000 | 00 | 000000 | 00 |
24 | 36 sq. ft. (1/2" bead) | 5 | 24 | One-Time Use | 1 | __ | ASTM E84 25/50 for Flame and Smoke, UL 2818 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
Quick-Cure Spray Foam Insulation

- Temperature Range: -40° to 175° F
- Heat Flow Rate: Not Rated
- Density: 1.9 lbs./cu. ft.
- Color: Blue
- Specifications Met: ASTM E84 25/210 for Flame and Smoke
Expanding quickly to fill large voids, this foam insulation begins to harden in 3 minutes so you can cut, sand, and finish your surface.
Container Net Weight, oz. | Approximate Coverage, cu. ft. | Begins to Harden, min. | Useful Life | Includes | Each | |
13 | 0.3 | 3 | One-Time Use | Two Dispensing Tubes | 00000000 | 000000 |
Air-Powered Tube Cleaners

Launch foam cylinders through hose and tubing to power away dirt and deposits. Unlike cleaners with brushes, these work on flexible, curved, and coiled tubing as well as those with fittings, valves, and 90° bends. Connect the gun to your compressed air with the included quick-disconnect fitting. Attach a nozzle and load a cylinder that matches your tube ID, and then insert the nozzle into your tube and pull the trigger. To thoroughly clean the tubing, you may have to use a second cylinder. Cylinders are single use.
The gun and nozzle kit includes a gun and nine nozzles for the following tube IDs: 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", and 2". The cylinders are not included.

Air Inlet | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Tube ID | Coupling Size | Gender | Connection Style | Min. Pressure, psi | Max. Pressure, psi | No. of Nozzles | Includes | Each | |
For Connections without Fittings | |||||||||
1/4", 3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", 2" | 1/2 | Male | Quick Disconnect | 90 | 120 | 9 | 1/2" Barbed Air Inlet Adapter, Hose Clamp | 0000000 | 000000000 |

Air Inlet | |||||||
---|---|---|---|---|---|---|---|
Coupling Size | Gender | Connection Style | Min. Pressure, psi | Max. Pressure, psi | Material | Each | |
1/2 | Male | Quick Disconnect | 90 | 120 | Aluminum | 000000 | 0000000 |

Each | Package | |||||
---|---|---|---|---|---|---|
For Tube ID | Material | Each | Pkg. Qty. | Pkg. | ||
1/4" | Polyurethane Foam | 0000000 | 00000 | 100 | 0000000 | 000000 |
3/8" | Polyurethane Foam | 0000000 | 000 | 100 | 0000000 | 00000 |
1/2" | Polyurethane Foam | 0000000 | 000 | 100 | 000000 | 00000 |
5/8" | Polyurethane Foam | 0000000 | 000 | 100 | 0000000 | 00000 |
3/4" | Polyurethane Foam | 0000000 | 000 | 50 | 0000000 | 00000 |
1" | Polyurethane Foam | 0000000 | 0000 | 50 | 0000000 | 00000 |
1 1/4" | Polyurethane Foam | 0000000 | 0000 | 50 | 0000000 | 00000 |
1 1/2" | Polyurethane Foam | 0000000 | 0000 | 25 | 000000 | 00000 |
2" | Polyurethane Foam | 0000000 | 0000 | 25 | 0000000 | 00000 |
Aerosol Can Trigger Adapters

For accurate paint control without finger fatigue, snap these reusable adapters onto your aerosol cans.
Material | Each | |
Plastic | 0000000 | 00000 |
Hand-Pump Foamers

The nozzle on this foamer injects air to make cleaners and disinfectants foam. It can also be used as a sprayer. The trigger locks for continuous spraying.
Replacement trigger and wand kits do not include nozzles.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure that the tank, seal, wand, and nozzle are suitable for your application.
Foamers | Repair Kits | Replacement Trigger and Wand Kits | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Dia. | Ht. | Tank Material | Seal Material | Color | Hose Lg. | Wand Lg. | Fill Opening Dia. | Graduation Marks | Each | Each | Each | |||
Cone/Flat/Foam/Stream Dispensing | |||||||||||||||
2 | 9" | 20 1/2" | Polyethylene Plastic | Viton® Fluoroelastomer Rubber | Semi-Clear White | 50" | 21" | 2" | 1/2 gal. 2 L | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
Small-Capacity Hand-Pump Foamers

Small enough to spray with one hand, these foamers aerate cleaners to create a foam that breaks down dirt and grime. The foam is easier to see than liquid cleaners and clings where liquid cleaners might drip. They can also be used as sprayers. Swap out the included nozzles as needed—go from a fine mist for delicate surfaces to a powerful stream to remove stuck-on material. The polyethylene tank is lightweight and resists impact and chemicals. The Viton® fluoroelastomer seal resists chemicals too, so you can use these foamers with a variety of solvents and acids.
Cap., fl. oz. | Dia. | Ht. | Tank Material | Seal Material | Color | Fill Opening Dia. | Graduation Marks | Features | Includes | Each | |
Cone/Foam/Mist/Stream Dispensing | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
48 | 5" | 12" | Polyethylene Plastic | Viton® Fluoroelastomer Rubber | Semi-Clear White | 2" | 8 oz. 250 ml | Pressure-Relief Valve | Brass Adjustable Nozzle, Ceramic Fine Misting Nozzle, Polypropylene Foaming Nozzle | 0000000 | 000000 |
Backpack Battery-Powered Foamers

For large cleaning jobs, these backpack foamers stay pressurized with a rechargeable battery, so you don't have to stop to pump or plug them in. They aerate cleaners and create a foam that breaks down dirt and grime. The foam is easier to see than liquid cleaners and clings where liquid might drip. They can also be used as sprayers. Swap out the included nozzles to switch between patterns ranging from a fine mist for delicate surfaces to a powerful stream to remove stuck-on material. These foamers also have a trigger that can be locked for continuous spray.
All the components—from the stainless steel wand to the Viton® fluoroelastomer seal—stand up to a variety of solvents and acids. The polyethylene tank is lightweight and resists impact. A built-in filter helps prevent grass and debris from creating clogs.
Foamers with 2-90 psi operating pressure let you change their pressure based on the job. Use less pressure on delicate surfaces and more pressure for aggressive cleaning.
Foamers | Replacement Spray Wands | Replacement Batteries | Replacement Chargers | |||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Operating Pressure, psi | Flow Rate, gpm | Cap., gal. | Wd. | Dp. | Ht. | Tank Material | Seal Material | Color | Hose Lg. | Wand Lg. | Fill Opening Dia. | Graduation Marks | Batteries Included | Battery Charger Included | Features | Includes | Each | Each | Each | Each | ||||
Cone/Flat/Foam/Mist/Stream Dispensing | ||||||||||||||||||||||||
40 | 0.3 | 4 | 14 1/4" | 8 1/2" | 22 1/4" | Polyethylene Plastic | Viton® Fluoroelastomer Rubber | Semi-Clear White | 50" | 21" | 4 1/4" | 1 gal. | Yes | Yes | Adjustable Nozzle, Continuous Spray, Filter, Wand Holder | One Brass Nozzle, Five Polypropylene Nozzles | 0000000 | 0000000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
2-90 | 0.1-0.6 | 4 | 15 1/4" | 9 3/4" | 22" | Polyethylene Plastic | Viton® Fluoroelastomer Rubber | Semi-Clear Yellow | 50" | 21" | 4 3/4" | 1 gal. 1 L | Yes | Yes | Adjustable Nozzle, Continuous Spray, Filter, Wand Holder | One Brass Nozzle, Five Polypropylene Nozzles | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 | 000000000 | 00000 |