Material Material |
|---|
|
Environment Environment |
|---|
|
Specifications Met Specifications Met |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
For Maximum Cord OD For Maximum Cord OD |
|---|
Cord Holding Type Cord Holding Type |
|---|
 |  |
| Bushing | Break-Through Seal |
Sanitary Sealing Grommets
Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas. Made of silicone, these grommets have a wide temperature range, resist washdown chemicals and cleaners, and are FDA compliant for direct contact with food. They’re also flexible, so hydraulic pressure surges, pipe expansion, and cord flexing won’t break their seal or damage them. No caulk or sealant is needed to install these grommets because their ridges form a strong seal that keeps out dust, debris, and moisture. The ridges also act as guidelines for trimming the center of these grommets to size; they’re sized to standard tube diameters.
To mount the flanges of these grommets, use their drilled holes. Flanges are 316 stainless steel to resist corrosion from washdowns with harsh cleaners and sanitizers.
Style 1 grommets work on tubing that isn’t installed yet.
Style 2 grommets have a split design to wrap over tubing that’s already in place. For a secure seal, crimp the included metal staples over the seal using pliers.
For technical drawings and 3-D models, click on a part number.
| Style | ID | Flange Diameter (D) | Overall Height (E) | Temperature Range, °F | For Use Outdoors | Number of Mounting Holes | Mounting Hole Diameter | Mounting Fasteners Included | Color | Specifications Met | Each | |
Silicone Rubber with 316 Stainless Steel Flange | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 0"-1" | 2 3/4" | 2" | -40° to 500° | No | 4 | 0.177" | No | White | FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
| 1 | 0"-2 1/2" | 4 1/8" | 2 3/8" | -40° to 500° | No | 4 | 0.177" | No | White | FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1 | 0"-3 3/4" | 5 3/4" | 3" | -40° to 500° | No | 6 | 0.177" | No | White | FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 2 | 0"-2 1/2" | 4 1/8" | 2 3/8" | -40° to 500° | No | 5 | 0.177" | No | White | FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 2 | 0"-3 3/4" | 5 3/4" | 3" | -40° to 500° | No | 7 | 0.177" | No | White | FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
Food Industry Wraparound Multi-Cord Grips
FDA compliant for direct food contact, these cord grips have a multi-piece design to wrap around cables in sanitary environments without removing connectors or rewiring. They’re rated IP69K as protective against dust and high-pressure, high-temperature jets of water, such as the washdowns in food and pharmaceutical plants.
Choose a housing and then select inserts (sold separately). Made of stainless steel, housings resist chemicals and corrosion. Inserts are made of TPE rubber, which combines the flexibility and resilience of rubber and plastic, so they’ll maintain their shape when wrapped around your cords.
Inserts for 1 cord have a slit that eliminates the need to thread cable through them.
Use inserts for 0 cords to block off unused openings in the housing.
For technical drawings and 3-D models, click on a part number.
For Insert | For Panel Cutout | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For No. of Inserts | Dia. | Size | Lg. | Wd. | Dp. | Lg. | Wd. | Mounting Fasteners Included | No. of | Dia. | Temperature Range, °F | Environmental Rating | Specifications Met | Each | |
Stainless Steel and Blue TPE Rubber | |||||||||||||||
| 3 | 1.07" | Large | 4.77" | 2.29" | 0.56" | 3.4" | 1.4" | No | 4 | 0.22" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000000 |
| 4 | 1.07" | Large | 5.83" | 2.29" | 0.56" | 4.4" | 1.4" | No | 4 | 0.22" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 000000 |
| 6 | 0.67" | Small | 5.83" | 1.5" | 0.56" | 4.4" | 0.7" | No | 4 | 0.22" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 000000 |
| 8 | 0.67" | Small | 4.77" | 2.29" | 0.56" | 3.4" | 1.4" | No | 4 | 0.22" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 000000 |
| 12 | 0.67" | Small | 5.83" | 2.29" | 0.56" | 4.4" | 1.4" | No | 4 | 0.22" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 000000 |
| For Total No. of Cords | For Cord OD | Dia. | Dp. | Temperature Range, °F | Environmental Rating | Specifications Met | Each | |
Blue TPE Rubber | ||||||||
|---|---|---|---|---|---|---|---|---|
Small | ||||||||
| 0 | __ | 0.67" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 00000 |
| 1 | 0.08"-0.11" | 0.67" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.12"-0.15" | 0.67" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.16"-0.19" | 0.67" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.2"-0.23" | 0.67" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.24"-0.27" | 0.67" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.28"-0.31" | 0.67" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.32"-0.35" | 0.67" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.36"-0.39" | 0.67" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.4"-0.43" | 0.67" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.44"-0.47" | 0.67" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
Large | ||||||||
| 0 | __ | 1.07" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.48"-0.51" | 1.07" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.52"-0.55" | 1.07" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.56"-0.59" | 1.07" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.6"-0.62" | 1.07" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.63"-0.66" | 1.07" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.67"-0.7" | 1.07" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.71"-0.74" | 1.07" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.75"-0.78" | 1.07" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.79"-0.82" | 1.07" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.83"-0.86" | 1.07" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
| 1 | 0.87"-0.9" | 1.07" | 1.11" | -40° to 175° | NEMA 4X, IP69K | FDA Compliant 21 CFR 177.2600 | 00000000 | 0000 |
Sanitary Break-Through Multi-Cord Grips
Install additional cables without swapping cord grips by pushing them through the thin, flexible seals on these grips, which have a sanitary design suitable for food-processing and pharmaceutical plants. Made of stainless steel, they stand up to frequent washdowns with harsh cleaners and sanitizers without corroding. To eliminate crevices where bacteria could grow and make them easier to clean, they have polished surfaces, rounded edges, and their screws aren’t exposed. The seals are rubber to resist water, steam, and UV light. These grips are FDA compliant for direct contact with food. They’re also rated IP65, meaning they’re dust tight and protected against light rinses with water.
These grips have a low-profile and seamless look because their face is flush with the seals.
For technical drawings and 3-D models, click on a part number.
For Panel | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Cord OD (For Number of Cords) | Mounting Location | Length | Width | Depth | Cutout Diameter | Cutout Length | Cutout Width | Maximum Thickness | Material | Temperature Range, °F | Environmental Rating | Each | |
For 13 Cords | |||||||||||||
| 0.118"-0.244" (2), 0.177"-0.335" (4), 0.236"-0.394" (4), 0.354"-0.551" (2), 0.551"-0.709" (1) | Panel | 3.54" | 3.54" | 0.2" | 2.95" | __ | __ | 0.12" | Stainless Steel | -20° to 190° | IP65 | 000000 | 0000000 |
For 18 Cords | |||||||||||||
| 0.315"-0.472" | Panel | 5.71" | 3.94" | 0.2" | __ | 5.2" | 3.23" | 0.12" | Stainless Steel | -20° to 190° | IP65 | 000000 | 000000 |
| 0.236"-0.394" (9), 0.472"-0.709" (8), 0.709"-0.984" (1) | Panel | 8.7" | 3.54" | 0.2" | __ | 7.56" | 2.44" | 0.12" | Stainless Steel | -20° to 190° | IP65 | 000000 | 000000 |
For 24 Cords | |||||||||||||
| 0.236"-0.413" | Panel | 5.71" | 3.94" | 0.2" | __ | 5.2" | 3.23" | 0.12" | Stainless Steel | -20° to 190° | IP65 | 000000 | 000000 |
For 30 Cords | |||||||||||||
| 0.138"-0.244" (12), 0.236"-0.394" (12), 0.354"-0.551" (4), 0.472"-0.709" (2) | Panel | 5.71" | 3.94" | 0.2" | __ | 5.2" | 3.23" | 0.12" | Stainless Steel | -20° to 190° | IP65 | 0000000 | 000000 |
| 0.138"-0.244" (12), 0.236"-0.394" (12), 0.354"-0.551" (6) | Panel | 5.71" | 3.94" | 0.2" | __ | 5.2" | 3.23" | 0.12" | Stainless Steel | -20° to 190° | IP65 | 000000 | 000000 |
For 40 Cords | |||||||||||||
| 0.177"-0.335" | Panel | 5.71" | 3.94" | 0.2" | __ | 5.2" | 3.23" | 0.12" | Stainless Steel | -20° to 190° | IP65 | 000000 | 000000 |
For 47 Cords | |||||||||||||
| 0.138"-0.256" (14), 0.177"-0.335" (28), 0.276"-0.433" (4), 0.433"-0.63" (1) | Panel | 8.7" | 3.54" | 0.2" | __ | 7.56" | 2.44" | 0.12" | Stainless Steel | -20° to 190° | IP65 | 0000000 | 000000 |
For 56 Cords | |||||||||||||
| 0.138"-0.244" (48), 0.236"-0.394" (8) | Panel | 5.71" | 3.94" | 0.2" | __ | 5.2" | 3.23" | 0.12" | Stainless Steel | -20° to 190° | IP65 | 000000 | 000000 |
| 0.236"-0.394" (36), 0.354"-0.551" (8), 0.551"-0.709" (8), 0.709"-0.984" (4) | Panel | 13.35" | 5.87" | 0.2" | __ | 11.93" | 4.53" | 0.12" | Stainless Steel | -20° to 190° | IP65 | 000000 | 000000 |
For 158 Cords | |||||||||||||
| 0.138"-0.244" (126), 0.236"-0.394" (24), 0.315"-0.472" (6), 0.472"-0.709" (2) | Panel | 13.35" | 5.87" | 0.2" | __ | 11.93" | 4.53" | 0.12" | Stainless Steel | -20° to 190° | IP65 | 000000 | 000000 |
Sanitary Washdown Cord Grips
Securely connect cable in sanitary environments such as food plants with these watertight cord grips. IP68 and IP69 ratings mean they can be submerged in water for up to 30 minutes, and stand up to high-temperature, high-pressure washdowns, so they will shield cable from both clean-out-of-place (COP) soaking and clean-in-place (CIP) washdowns.
With no exposed threads and a smooth finish, these grips are easy to wash and are free of space where bacteria could grow, reducing the chance of foodborne illnesses. A rubber bushing seals the connection to the cord, and a rubber seal blocks water and contaminants from entering your enclosure. In case they fall into your line, both the bushing and seal are FDA compliant for direct contact with food. They are also blue, so you can easily spot them. The rest of these cord grips are made of stainless steel, which won’t corrode when washed with harsh cleaners.
Use them indoors or out, they're also NEMA rated to protect against dirt, oil, water, and coolant. All meet U.S. and Canadian safety standards.
For technical drawings and 3-D models, click on a part number.
| For Cord OD | For Knockout Trade Size | Thread Type | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
| 0.2"-0.25" | 1/4 | NPT | Stainless Steel | 0° to 210° | Rubber Seal, Stainless Steel Locknut | NEMA 4X, NEMA 13, IP68, IP69 | UL Listed, C-UL Listed, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
| 0.24"-0.39" | 3/8 | NPT | Stainless Steel | 0° to 210° | Rubber Seal, Stainless Steel Locknut | NEMA 4X, NEMA 13, IP68, IP69 | UL Listed, C-UL Listed, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 0.36"-0.53" | 1/2 | NPT | Stainless Steel | 0° to 210° | Rubber Seal, Stainless Steel Locknut | NEMA 4X, NEMA 13, IP68, IP69 | UL Listed, C-UL Listed, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 0.56"-0.7" | 3/4 | NPT | Stainless Steel | 0° to 210° | Rubber Seal, Stainless Steel Locknut | NEMA 4X, NEMA 13, IP68, IP69 | UL Listed, C-UL Listed, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |