Housing is plastic.

Apply your load directly to the top of these gauges to measure compression force.

Press the side of the gauge tip against an object to record the amount of tension required to move it.

Check the tension on wire, filaments, or strapping right where they’re used to keep spooling, EDM wire cutting, 3D printing, and strapping systems running smoothly.

Measure tension force as well as weight. Also known as dynamometers.

A chuck-style grip with a round opening gets a secure hold on pins.

Hold fine wire and filament.

Thinner than a credit card, these force sensors fit into narrow spaces to measure the applied load between two surfaces.

Mount these sensors between a robot arm and a tool for precise control during delicate tasks, such as sanding or assembling small parts.

Place your tool and the included square drive connector on the tester and turn.

These testers have a digital display and are accurate to ±1%.

Calibrate torque screwdrivers, both hand and non-impact electric styles, on your production line and put an end to fasteners loosening or failing from under or over tightening.

Use these gauges with changeable sensors and square-drive sockets to display, collect, and download torque readings.

Measure belt tension up to 2,200 lbs.

A green light and a beep alert you when you've reached 90% of your set torque, and a steady tone sounds once you've hit your target. Set your torque in cNm, cm-Kg, or in.-lbs. and quickly check the LCD for real-time measurements along the way. A red light warns if you begin to overtighten.

Make sure blades are straight between your guides.