This adapter adds to your forklift a hook for vertical lifting and a hitch receiver for towing. For inserts and couplers, see Hitch Inserts, Mounting Plate Inserts for Drawbar Couplers, and Drawbar Couplers.

Warning: Never use to lift people or items over people.

This adapter has a drawbar hitch receiver on top to convert a forklift for towing. For inserts and couplers, see Hitch Inserts, Mounting Plate Inserts for Drawbar Couplers, and Drawbar Couplers.

Warning: Never use to lift people or items over people.

Attach these booms to a forklift to handle long, cumbersome loads. They are labeled with capacity for each hook position. First hook position is measured from the fork pocket end.

Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. Check with the manufacturer of your forklift for load capabilities before using.

Style D is designed for tall loads where more bottom clearance is needed. It has three hook positions on the adjustable length section spaced 12" apart. The fixed section has three hook positions spaced 6" apart.

Warning: Never use to lift people or items over people.

Add length to the forks on a forklift for extra support of long and large loads. Steel loops secure these extensions to the forks.

Note: Extensions reduce the capacity of a forklift. Please refer to your forklift manufacturer for load capacity reductions. OSHA standards require that length of extensions is 150% or less of the supporting fork length.

Warning: Never use to lift people or items over people.

Protect loads from dents without reducing load capacity. These bumpers include brackets and inserts. Brackets are adhesive-back for permanent mounting to fork uprights. Inserts slide into the brackets for protection, wear resistance, and vibration damping. Replace inserts when worn.

For technical drawings and 3-D models, click on a part number.

Convert a forklift to lift and transport drums. The arms on these drum movers automatically close and lock around the side of a drum when lifted with a forklift and release when the drum is set down. Locking screws clamp down on the forks to secure the movers to your forklift.

Style A are for use with plastic drums.

Style C have a single locking screw for faster tightening.

Style D have rubber-lined gripping arms that provide a nonslip contact surface to better grip drums.

Style E hold two drums.

Warning: Never use to lift people or items over people.

The jaws automatically grip the top of the drum when lifted with a forklift—great for areas with limited side clearance. The jaws release when the drum is set down. Movers have locking screws that clamp down on the forks to secure the movers to your forklift. Use with closed- and open-head drums.

Drum protectors (sold separately) bolt to the base of the mover to cushion and protect the drum from wear (mounting hardware included). Drum movers for two containers require two protectors.

Warning: Never use to lift people or items over people.

Slide these dispensers onto the forks of a forklift to raise a drum, then use the hand chain to tilt and drain it from up to 10 feet away. Drums can rotate 360° in either direction. Chains or straps with ratchet-style tighteners secure the drums. Note: In half-full drums contents shift, which reduces capacity.

Style B dispensers have an additional bracket assembly that grips the drum from the top and bottom.

Optional drum adapters fit inside the saddle to hold 30-gallon drums.

Optional tilt brakes prevent the drum from tilting when not in use.

Warning: Never use to lift people or items over people.

Hook the loops of a bulk bag onto the legs of these lifters to maintain support while a forklift raises the bag.