Forklift Booms
Slide these booms onto forklift forks to handle long, cumbersome loads. They secure to the forklift carriage with the included safety chains. These booms are labeled with capacity for each hook position. First hook position is measured from the fork pocket end.
Booms that are made in the U.S. have a label that confirms they are manufactured in the United States.
Horizontally telescoping booms extend and retract lengthwise to handle extra-long loads and reach into hard-to-access areas. Those that also adjust vertically move in and out and up and down for the most flexible load placement. To access tall loads, raise the hook position and lock the boom into place with the pin.
Styles C and G are designed for tall loads where more bottom clearance is needed. The fixed section has three hook positions spaced 6” apart.
Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. Check with the manufacturer of your forklift for load capabilities before using.
Warning: Never use to lift people or items over people.
Capacity, lbs. | For Max. Fork | Hook | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | @ 3 ft. | @ 4 ft. | @ 5 ft. | @ 6 ft. | @ 7 ft. | @ 8 ft. | @ 9 ft. | @ 10 ft. | @ 11 ft. | @ 12 ft. | Fork Pocket Spacing Ctr.-to-Ctr. | For Min. Fork Lg. | Wd. | Ht. | Material | Style | Movement | Opening Wd. | First Hook Position, ft. | Lg., ft. | Each | |
Fixed | ||||||||||||||||||||||
| A | 4,000 | 3,700 | 3,500 | 3,200 | __ | __ | __ | __ | __ | __ | 11" | 24" | 7 1/2" | 2 1/2" | Painted Steel | Latch Grab | Swivel Rigid | 1" 5/8" | 3 | 7 | 00000000 | 0000000 |
Horizontally Telescoping | ||||||||||||||||||||||
| B | 4,000 | 3,700 | 3,500 | 3,200 | 3,000 | 2,700 | 2,500 | 2,200 | 2,000 | 1,700 | 24" | 24" | 7 1/2" | 2 1/2" | Painted Steel | Latch Grab | Swivel Rigid | 1" 5/8" | 3 | 7 1/2-12 1/2 | 00000000 | 00000000 |
| B | 6,000 | 5,000 | 4,500 | 4,000 | 3,500 | 3,000 | 2,600 | 2,300 | 2,000 | 1,800 | 24" | 24" | 7 1/4" | 2 1/4" | Painted Steel | Latch | Swivel | 1" | 3 | 7 1/2-12 1/2 | 00000000 | 00000000 |
| B | 8,000 | 6,600 | 6,000 | 5,300 | 4,600 | 4,000 | 3,500 | 3,000 | 2,600 | 2,200 | 24" | 24" | 7 1/4" | 2 1/4" | Painted Steel | Latch Latch | Swivel Swivel | 1" 1 1/4" | 3 | 7-12 1/2 | 00000000 | 00000000 |
| C | 3,700 | 3,200 | 2,700 | 2,200 | 1,700 | __ | __ | __ | __ | __ | 24" | 24" | 7 1/2" | 2 1/2" | Painted Steel | Latch Grab | Swivel Rigid | 1" 5/8" | 2 1/2 | 4 1/2-8 | 00000000 | 00000000 |
Horizontally Telescoping, Vertically Adjustable (37° Max. Lifting Angle) | ||||||||||||||||||||||
| D | 4,000 | 3,700 | 3,500 | 3,200 | 3,000 | 2,700 | 2,500 | 2,200 | 2,000 | 1,700 | 24" | 24" | 7 1/2" | 2 1/2" | Painted Steel | Latch Grab | Swivel Rigid | 1" 5/8" | 3 | 7 1/2-12 1/2 | 00000000 | 00000000 |
| D | 6,000 | 5,000 | 4,500 | 4,000 | 3,500 | 3,000 | 2,600 | 2,300 | 2,000 | 1,800 | 24" | 24" | 7 1/4" | 2 1/4" | Painted Steel | Latch | Swivel | 1" | 3 | 7 1/2-12 1/2 | 00000000 | 00000000 |
| D | 8,000 | 6,600 | 6,000 | 5,300 | 4,600 | 4,000 | 3,500 | 3,000 | 2,600 | 2,200 | 24" | 24" | 7 1/4" | 2 1/4" | Painted Steel | Latch Latch | Swivel Swivel | 1" 1 1/4" | 3 | 7-12 1/2 | 00000000 | 00000000 |
Forklift Booms | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | For Max. Fork | Hook | Replacement Pin Housing Rebuild Kits | Replacement Pull Pins | ||||||||||||||||||||||
| Style | @ 3 ft. | @ 4 ft. | @ 5 ft. | @ 6 ft. | @ 7 ft. | @ 8 ft. | @ 9 ft. | @ 10 ft. | @ 11 ft. | @ 12 ft. | Fork Pocket Spacing Ctr.-to-Ctr. | For Min. Fork Lg. | Wd. | Ht. | Material | Style | Movement | Opening Wd. | First Hook Position, ft. | Lg., ft. | Each | Each | Each | |||
Fixed | ||||||||||||||||||||||||||
| E | __ | 4,000 | 3,500 | 3,000 | 2,500 | 2,000 | __ | __ | __ | __ | 11 1/2" | 24" | 5 1/2" | 2 1/2" | Painted Steel | Latch | Swivel | 1 1/16" | 4 | 8 | 0000000 | 000000000 | 000000 | 00 | 000000 | 00 |
Horizontally Telescoping | ||||||||||||||||||||||||||
| F | 4,000 | 4,000 | 4,000 | 4,000 | 3,200 | 2,600 | 2,200 | 1,900 | 1,600 | 1,500 | 15" | 30" | 7 1/2" | 2 1/2" | Painted Steel | Latch | Swivel | 1 1/16" | 3 | 7-12 | 0000000 | 00000000 | 0000000 | 0000000 | 000000 | 00 |
| F | 6,000 | 6,000 | 6,000 | 6,000 | 5,000 | 4,200 | 3,500 | 3,000 | 2,700 | 2,500 | 15" | 30" | 7 1/2" | 2 1/2" | Painted Steel | Latch | Swivel | 1 5/16" | 3 | 7-12 | 0000000 | 00000000 | 0000000 | 000000 | 000000 | 00 |
| F | 8,000 | 8,000 | 8,000 | 8,000 | 7,000 | 5,700 | 4,800 | 4,100 | 3,600 | 3,100 | 15" | 30" | 7 1/2" | 2 1/2" | Painted Steel | Latch | Swivel | 1 9/16" | 3 | 7-12 | 0000000 | 00000000 | 0000000 | 000000 | 000000 | 00 |
| G | 4,000 | 4,000 | 3,500 | 1,800 | __ | __ | __ | __ | __ | __ | 12 1/2" | 30" | 7 1/2" | 2 1/2" | Painted Steel | Latch | Swivel | 1 1/16" | 2 1/2 | 4-6 | 0000000 | 00000000 | 0000000 | 000000 | 000000 | 00 |
Horizontally Telescoping, Vertically Adjustable (40° Max. Lifting Angle) | ||||||||||||||||||||||||||
| H | 4,000 | 4,000 | 4,000 | 4,000 | 3,200 | 2,600 | 2,200 | 1,900 | 1,600 | 1,500 | 15" | 30" | 7 1/2" | 2 1/2" | Painted Steel | Latch | Swivel | 1 1/16" | 3 | 7-12 | 0000000 | 00000000 | 0000000 | 000000 | 0000000 | 0000000 |
| H | 6,000 | 6,000 | 6,000 | 6,000 | 5,000 | 4,200 | 3,500 | 3,000 | 2,700 | 2,500 | 15" | 30" | 7 1/2" | 2 1/2" | Painted Steel | Latch | Swivel | 1 5/16" | 3 | 7-12 | 0000000 | 00000000 | 0000000 | 000000 | 0000000 | 000000 |
| H | 8,000 | 8,000 | 8,000 | 8,000 | 7,000 | 5,700 | 4,800 | 4,100 | 3,600 | 3,100 | 15" | 30" | 7 1/2" | 2 1/2" | Painted Steel | Latch | Swivel | 1 9/16" | 3 | 7-12 | 0000000 | 00000000 | 0000000 | 000000 | 0000000 | 000000 |
A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.
Galvanized steel shackles have a thick coating for corrosion resistance.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.
| For Forklift Boom Part Number | Capacity, lbs. | Thick. | Pin Dia. | Opening Wd. | Inside Lg. | Inside Wd. | Specifications Met | Each | |
Galvanized Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3638T31, 3638T41, 3638T111, 3638T112, 3638T113, 3638T115, 3638T116, 3638T117 | 4,400 | 1/2" | 21/32" | 13/16" | 1 29/32" | 1 5/16" | ASME B30.26, Fed. Spec. RR-C-271F | 0000000 | 000000 |
| 3638T22, 3638T25, 3638T27, 3638T32, 3638T113, 3638T114, 3638T117, 3638T118 | 7,100 | 5/8" | 25/32" | 1 1/16" | 2 13/32" | 1 23/32" | ASME B30.26, Fed. Spec. RR-C-271F | 0000000 | 00000 |
| 3638T24, 3638T33, 3638T114, 3638T118 | 10,400 | 3/4" | 29/32" | 1 1/4" | 2 13/16" | 2" | ASME B30.26, Fed. Spec. RR-C-271F | 0000000 | 00000 |
Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.
Note: Capacities are for vertical lifting only.
Hook | Eye | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Forklift Boom Part Number | Capacity, lbs. | Opening Wd. | Usable Lg. | ID | Thick. | Specifications Met | For Use With | Each | |
| 3638T22, 3638T25, 3638T31, 3638T41, 3638T111, 3638T112, 3638T113, 3638T115, 3638T116, 3638T117 | 4,400 | 1 1/16" | 6 1/8" | 1 3/4" | 5/8" | ASME B30.10 | Chain, Wire Rope | 00000000 | 0000000 |
| 3638T27, 3638T32, 3638T113, 3638T114, 3638T117, 3525T118 | 6,600 | 1 3/16" | 6 1/2" | 1 3/4" | 5/8" | ASME B30.10 | Chain, Wire Rope | 00000000 | 000000 |
| 3638T24, 3638T33, 3638T114, 3638T118 | 11,000 | 1 1/2" | 7 1/2" | 2" | 3/4" | ASME B30.10 | Chain, Wire Rope | 00000000 | 000000 |
| For Forklift Boom Part Number | Includes | Each | |
| 3638T22, 3638T25, 3638T31, 3638T41, 3638T111, 3638T112, 3638T113, 3638T115, 3638T116, 3638T117 | Latch, Spring, Nut and Bolt | 00000000 | 000000 |
| 3638T27, 3638T32, 3638T113, 3638T114, 3638T117, 3638T118 | Latch, Spring, Nut and Bolt | 00000000 | 00000 |
| 3638T24, 3638T33, 3638T114, 3638T118 | Latch, Spring, Nut and Bolt | 00000000 | 00000 |
Compact Forklift Booms
Designed for moving loads in cramped warehouses, these booms collapse to a smaller size than standard booms. You can also extend them to carry long loads or place items in hard-to-reach spots. Slide your forks into the pockets and secure to your carriage with the included chain.
These booms are labeled with capacity for each hook position. First hook position is measured from the fork pocket end.
Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. Check with the manufacturer of your forklift for load capabilities before using.
Warning: Never use to lift people or items over people.
Capacity, lbs. | For Max. Fork | Hook | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| @ 31 in. | @ 37 in. | @ 43 in. | @ 52 in. | @ 64 in. | @ 66 in. | @ 76 in. | @ 79 in. | @ 89 in. | @ 92 in. | Fork Pocket Spacing Ctr.-to-Ctr. | For Min. Fork Lg. | Wd. | Ht. | Material | Style | Movement | Opening Wd. | First Hook Position | Lg., ft. | Each | |
Horizontally Telescoping | |||||||||||||||||||||
| 4,000 | 3,800 | 3,700 | 3,500 | __ | 3,200 | __ | 3,000 | __ | 2,700 | 24" | 24" | 7 1/2" | 2 1/2" | Painted Steel | Latch Grab | Swivel Rigid | 1" 5/8" | 31" | 4 1/2-8 | 00000000 | 000000000 |
| 6,000 | 5,700 | 5,400 | 4,900 | __ | 4,300 | __ | 3,600 | __ | 3,000 | 24" | 24" | 7 1/4" | 2 1/4" | Painted Steel | Latch | Swivel | 1" | 31" | 4 1/2-8 | 00000000 | 00000000 |
| 8,000 | 7,600 | 7,200 | 6,600 | 5,800 | __ | 5,000 | __ | 4,200 | __ | 24" | 24" | 7 1/4" | 2 1/4" | Painted Steel | Latch Latch | Swivel Swivel | 1" 1 1/4" | 31" | 4 1/2-7 1/2 | 00000000 | 00000000 |
A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.
Galvanized steel shackles have a thick coating for corrosion resistance.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.
| For Forklift Boom Part Number | Capacity, lbs. | Thick. | Pin Dia. | Opening Wd. | Inside Lg. | Inside Wd. | Specifications Met | Each | |
Galvanized Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3638T119 | 4,400 | 1/2" | 21/32" | 13/16" | 1 29/32" | 1 5/16" | ASME B30.26, Fed. Spec. RR-C-271F | 0000000 | 000000 |
| 3638T121, 3638T122 | 7,100 | 5/8" | 25/32" | 1 1/16" | 2 13/32" | 1 23/32" | ASME B30.26, Fed. Spec. RR-C-271F | 0000000 | 00000 |
| 3638T122 | 10,400 | 3/4" | 29/32" | 1 1/4" | 2 13/16" | 2" | ASME B30.26, Fed. Spec. RR-C-271F | 0000000 | 00000 |
Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.
Note: Capacities are for vertical lifting only.
Hook | Eye | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Forklift Boom Part Number | Capacity, lbs. | Opening Wd. | Usable Lg. | ID | Thick. | Specifications Met | For Use With | Each | |
| 3638T119 | 4,400 | 1 1/16" | 6 1/8" | 1 3/4" | 5/8" | ASME B30.10 | Chain, Wire Rope | 00000000 | 0000000 |
| 3638T121, 3638T122 | 6,600 | 1 3/16" | 6 1/2" | 1 3/4" | 5/8" | ASME B30.10 | Chain, Wire Rope | 00000000 | 000000 |
| 3638T122 | 11,000 | 1 1/2" | 7 1/2" | 2" | 3/4" | ASME B30.10 | Chain, Wire Rope | 00000000 | 000000 |
Battery-Powered Forklift Booms
Push a button and the battery-powered hydraulic pump precisely extends and retracts these booms for you. You can move these booms while keeping your load suspended—up to 2,000 lbs. For heavier loads, you’ll need to position them first and then attach your load, but it’s still faster and more precise than tugging and shoving manual booms. Operate these booms from a safe distance using the pendant switch.
Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. A forklift with an 8,000 lb. rating is required. Check with the manufacturer of your forklift for load capabilities before using.
Warning: Never use to lift people or items over people.
Capacity, lbs. | For Max. Fork | Hook | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| @ 3 ft. | @ 4 ft. | @ 5 ft. | @ 6 ft. | @ 7 ft. | @ 8 ft. | @ 9 ft. | @ 10 ft. | @ 11 ft. | @ 12 ft. | Capacity While Adjusting Lg., lbs. | Fork Pocket Spacing Ctr.-to-Ctr. | For Min. Fork Lg. | Wd. | Ht. | Material | Style | Movement | Opening Wd. | First Hook Position, ft. | Lg., ft. | Batteries Included | Battery Charger Included | Includes | Each | |
Horizontally Telescoping | |||||||||||||||||||||||||
| 8,000 | 6,600 | 6,000 | 5,300 | 4,600 | 4,000 | 3,500 | 3,000 | 2,600 | 2,200 | 2,000 | 24" | 24" | 7 1/4" | 2 1/4" | Painted Steel | Latch | Swivel | 1", 1 1/4" | 3 | 7-12 | Yes | Yes | Pendant Switch on 8-ft. Cord | 0000000 | 000000000 |
Fork-Mount Pallet Dumpers
Shift loads off pallets and into containers from the safety of your forklift. A long cable extends from the top of these dumpers to your seat—pull it to release a latch and tip the front of the dumper. A hook at the end of each arm keeps the pallet from sliding off. Once you’ve dumped the load, lower your forks to the ground to straighten the pallet and latch the dumper back together.
Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. Check with the manufacturer of your forklift for load capabilities before using.
Warning: Never use to lift people or items over people.
Fork Pockets | For Max. Fork | Fork | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Usable Fork Lg. | Capacity, lbs. | No. of | Spacing Ctr.-to-Ctr. | For Min. Fork Lg. | Wd. | Ht. | Material | Color | Lg. | Wd. | Ht. | Forklift Attachment Type | Material | Color | Features | Each | |
| 52" | 2,000 | 2 | 20 1/2" | 32" | 7 1/2" | 2" | Powder-Coated Steel | Yellow | 91" | 32" | 32 1/2" | Hook and Chain | Powder-Coated Steel | Blue | Pull Cable | 0000000 | 0000000 |
Fork-Mount Roll-Lifting Poles
Safely transport rolled and coiled items with a forklift. Also known as carpet rams, these poles have pockets that slide over forks and a hook and chain that secures to your forklift’s carriage. The tip is yellow for visibility. For easy storage, remove the pole from the base when not in use.
Make sure the items you move don’t exceed your forklift's capacity.
Warning: Never use to lift people or items over people.
Pole | Fork Pockets | For Max. Fork | Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Capacity, lbs. | No. of | Spacing Ctr.-to-Ctr. | For Min. Fork Lg. | Wd. | Ht. | Lg. | Wd. | Ht. | Forklift Attachment Type | Material | Color | Each | |
| 48" | 2 3/4" | 2,500 | 2 | 24" | 30" | 7 5/8" | 2 5/8" | 77 3/8" | 34" | 7 1/4" | Hook and Chain | Painted Steel | Blue | 00000000 | 0000000 |
| 108" | 2 3/4" | 2,500 | 2 | 24" | 30" | 7 5/8" | 2 5/8" | 137 3/8" | 34" | 7 1/4" | Hook and Chain | Painted Steel | Blue | 00000000 | 00000000 |