Shape Shape |
|---|
 |  |
| Rod and Disc | Sheet and Bar |
 | |
| Hex Bar |
Width Width |
|---|
Diameter Diameter |
|---|
Thickness Thickness |
|---|
Certificate Certificate |
|---|
 | |
Yield Strength Yield Strength |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
About Copper, Brass, and Bronze
More
Ultra-Machinable 360 Brass Rods and Discs
- Yield Strength:
Inch sizes: 15,000 psi
Metric sizes: 23,000 psi - Hardness: See table
- Temper:
Inch sizes: H02 (1/2 Hard)
Metric sizes: 1/2 Hard - Heat Treatable: No
- Specifications Met:
Inch sizes: ASTM B16
Metric sizes: European Standard EN 12164
With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Dia. | Dia. Tolerance Range | Hardness | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 3/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 1/8" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 5/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 3/16" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 7/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 1/4" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 9/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 5/16" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 11/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 3/8" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 13/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 7/16" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 15/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 1/2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 00000000 | |||||
| 17/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 9/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 19/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 5/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 21/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 11/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 000000 | |||||
| 23/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 3/4" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 25/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 13/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 000000 | |||||
| 7/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 15/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 1/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 1/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 3/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 1/4" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 5/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 3/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 7/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 1/2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 9/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 5/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 3/4" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 7/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 000000 | |||||
| 2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 1/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 000000 | |||||
| 2 1/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 1/4" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 3/8" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 1/2" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 5/8" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 3/4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | |||||
| 3" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 1/8" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 1/4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 3/8" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 1/2" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 3/4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 4 1/4" | -0.12" to 0.12" | Rockwell B25 (Soft) | 00000000 | |||||
| 4 1/2" | -0.12" to 0.12" | Rockwell B25 (Soft) | 00000000 | |||||
| 5" | -0.12" to 0.12" | Rockwell B25 (Soft) | 00000000 | |||||
| 6" | -0.12" to 0.12" | Rockwell B25 (Soft) | 00000000 |
| Dia. | Dia. Tolerance Range | Hardness | 1/2" Lg. | 1" Lg. | 2" Lg. | 3" Lg. | |
| 1" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | ||||
| 1 1/2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | ||||
| 2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | ||||
| 2 1/2" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | ||||
| 3" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | ||||
| 4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | ||||
| 5" | -0.12" to 0.12" | Rockwell B25 (Soft) | 0000000 | ||||
| 6" | -0.12" to 0.12" | Rockwell B25 (Soft) | 0000000 |
1 m Lg. | ||||
|---|---|---|---|---|
| Dia., mm | Dia. Tolerance Range, mm | Hardness | Each | |
| 2 | -0.05 to 0.05 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 3 | -0.05 to 0.05 | Rockwell B75 (Medium) | 0000000 | 0000 |
| 4 | -0.05 to 0.05 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 5 | -0.05 to 0.05 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 6 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 7 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 8 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 9 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 10 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 12 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 14 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 15 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 16 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 18 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 000000 |
| 20 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 000000 |
| 25 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 000000 |
Tight-Tolerance Ultra-Machinable 360 Brass Rods
- Yield Strength: 25,000 psi
- Hardness: Rockwell B60 (Soft)
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B16
The diameter of these rods is held to a ±0.0002" tolerance. With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Dia. | Dia. Tolerance Range | Mechanical Finish | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/8" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 3/16" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 1/4" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 5/16" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 3/8" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 1/2" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 5/8" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 3/4" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 7/8" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 1" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 0000000 |
Ultra-Machinable 360 Brass Bars
- Yield Strength: 15,000 psi
- Hardness: Rockwell B35 (Soft)
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B16
With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Wd. | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Thick. (-0.009" to 0.009" Tolerance) | ||||||
|---|---|---|---|---|---|---|
| 1/8" | 0000000 | |||||
| 1/4" | 0000000 | |||||
| 3/8" | 0000000 | |||||
| 1/2" | 0000000 | |||||
| 5/8" | 000000 | |||||
| 3/4" | 000000 | |||||
| 1" | 0000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
5/32" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 5/32" | 0000000 | |||||
3/16" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 3/16" | 0000000 | |||||
| 1/4" | 000000 | |||||
| 3/8" | 000000 | |||||
| 1/2" | 000000 | |||||
| 5/8" | 000000 | |||||
| 3/4" | 00000000 | |||||
| 7/8" | 0000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
1/4" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 1/4" | 0000000 | |||||
| 5/16" | 000000 | |||||
| 3/8" | 00000000 | |||||
| 1/2" | 00000000 | |||||
| 5/8" | 00000000 | |||||
| 3/4" | 00000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/4" | 0000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
5/16" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 5/16" | 0000000 | |||||
| 3/8" | 0000000 | |||||
| 1/2" | 00000000 | |||||
| 5/8" | 00000000 | |||||
| 3/4" | 00000000 | |||||
| 1" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 2" | 00000000 | |||||
3/8" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 3/8" | 0000000 | |||||
| 1/2" | 00000000 | |||||
| 5/8" | 00000000 | |||||
| 3/4" | 00000000 | |||||
| 7/8" | 0000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
| 6" | 0000000 | |||||
7/16" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 7/16" | 0000000 | |||||
1/2" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 1/2" | 0000000 | |||||
| 5/8" | 00000000 | |||||
| 3/4" | 00000000 | |||||
| 7/8" | 000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 3 1/2" | 0000000 | |||||
| 4" | 00000000 | |||||
| 5" | 0000000 | |||||
| 6" | 0000000 | |||||
9/16" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 9/16" | 0000000 | |||||
5/8" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 5/8" | 0000000 | |||||
| 3/4" | 00000000 | |||||
| 7/8" | 00000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
3/4" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 3/4" | 0000000 | |||||
| 7/8" | 00000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 0000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
7/8" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 1 1/2" | 00000000 | |||||
| 2" | 00000000 | |||||
1" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1" | 0000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 3 1/2" | 00000000 | |||||
| 4" | 00000000 | |||||
| 5" | 00000000 | |||||
| 6" | 00000000 | |||||
1 1/4" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1 1/4" | 0000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
1 3/8" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1 3/4" | 00000000 | |||||
1 1/2" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1 1/2" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 0000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
1 3/4" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
2" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 2" | 0000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
2 1/4" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 2 1/4" | 0000000 | |||||
2 1/2" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 2 1/2" | 0000000 | |||||
| 3 1/2" | 00000000 | |||||
3" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 3" | 0000000 | |||||
Ultra-Machinable 360 Brass Hex Bars
- Yield Strength:
Inch sizes: 25,000 psi
Metric size: 23,000 psi - Hardness:
Inch sizes: Rockwell B55-B80 (Medium)
Metric sizes: Rockwell B75 (Medium) - Temper:
Inch sizes: H02 (1/2 Hard)
Metric sizes: 1/2 Hard - Heat Treatable: No
- Specifications Met:
Inch sizes: ASTM B16
Metric sizes: European Standard EN 12164
With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Wd. | Wd. Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/8" | -0.006" to 0.006" | 0000000 | |||||
| 3/16" | -0.006" to 0.006" | 0000000 | |||||
| 1/4" | -0.006" to 0.006" | 0000000 | |||||
| 5/16" | -0.006" to 0.006" | 0000000 | |||||
| 3/8" | -0.006" to 0.006" | 0000000 | |||||
| 7/16" | -0.006" to 0.006" | 0000000 | |||||
| 1/2" | -0.006" to 0.006" | 0000000 | |||||
| 9/16" | -0.006" to 0.006" | 0000000 | |||||
| 5/8" | -0.006" to 0.006" | 0000000 | |||||
| 11/16" | -0.006" to 0.006" | 0000000 | |||||
| 3/4" | -0.006" to 0.006" | 0000000 | |||||
| 13/16" | -0.006" to 0.006" | 0000000 | |||||
| 7/8" | -0.006" to 0.006" | 0000000 | |||||
| 15/16" | -0.006" to 0.006" | 0000000 | |||||
| 1" | -0.006" to 0.006" | 0000000 | |||||
| 1 1/8" | -0.006" to 0.006" | 0000000 | |||||
| 1 1/4" | -0.006" to 0.006" | 0000000 | |||||
| 1 3/8" | -0.009" to 0.009" | 0000000 | |||||
| 1 1/2" | -0.009" to 0.009" | 0000000 | |||||
| 1 5/8" | -0.009" to 0.009" | 0000000 | |||||
| 1 3/4" | -0.009" to 0.009" | 0000000 | |||||
| 2" | -0.009" to 0.009" | 0000000 | |||||
| 2 1/4" | -0.009" to 0.009" | 0000000 | |||||
| 2 1/2" | -0.009" to 0.009" | 0000000 |
1 m Lg. | |||
|---|---|---|---|
| Wd., mm | Wd. Tolerance, mm | Each | |
| 4 | -0.09 to 0.09 | 0000000 | 000000 |
| 5 | -0.09 to 0.09 | 0000000 | 00000 |
| 6 | -0.09 to 0.09 | 0000000 | 00000 |
| 7 | -0.09 to 0.09 | 0000000 | 00000 |
| 8 | -0.09 to 0.09 | 0000000 | 00000 |
| 10 | -0.11 to 0.11 | 0000000 | 00000 |
| 12 | -0.11 to 0.11 | 0000000 | 00000 |
| 14 | -0.11 to 0.11 | 0000000 | 000000 |
| 17 | -0.11 to 0.11 | 0000000 | 000000 |
| 19 | -0.13 to 0.13 | 0000000 | 000000 |
| 22 | -0.13 to 0.13 | 0000000 | 000000 |
| 24 | -0.13 to 0.13 | 0000000 | 000000 |