We will reply to your message within an hour.
With a high maximum coefficient of friction, these sheets provide immediate engagement.
Also known as nonmetallic molded strips.
Also known as semimetallic woven strips, these strips have a brass wire woven into the material to increase strength and improve heat dissipation.
These sheets provide stable torque at high and low speeds.
Use these sheets for a smooth stop.
A rubbery textured surface provides traction while being easy on shoes.
Apply this general purpose tape to any surface that requires traction.
Great for muddy and greasy areas, this tape has an extra-coarse surface for excellent traction.
Metal abrasives embedded in a metal backing allow this tape to last far longer than other antislip tape. It is often used to cover larger areas than other antislip tape, such as walkways and ramps.
Stick this ultra-flexible tape to ladder rungs, diamond tread plates, and other uneven and irregular surfaces with sharp corners.
Make stairs, ramps, and walkways safer with this eye-catching, high-traction tape.
These mats have a smooth bottom for use on hard floor surfaces.
These mats provide good traction while protecting walkways, ramps, and other high-traffic areas.
With a coarse ceramic/garnet abrasive surface, these mats feel like walking on sandpaper, even in environments where moisture and grease are constantly present.
Suction cups on the bottom keep these mats in place when wet.
Use these greaseproof mats where grease and oil are constantly present.
These mats withstand occasional contact with grease.
Use these mats where drainage and slip resistance are a priority.
These general purpose mats provide a walking surface in wet environments that allows liquids to drain beneath your feet.
Rigid mats are more durable than flexible mats, withstanding heavy loads and rough use.
Hollow tubes form a flexible, cushioned surface to reduce the fatigue and strain of standing while working.
Use greaseproof mats where grease and oil are constantly present. They're treated to protect the mat against odors and degradation.
Rigid and lightweight, these polyethylene mats resist acids, salt, gasoline, solvents, and chemicals.
These mats meet NSF/ANSI standards for use in food-processing areas.
Keep feet warm in cold, drafty rooms.
These mats are made up of layers of adhesive-coated sheets. When the top sheet gets dirty, pull the tab to remove it and expose the next clean sheet.
These general purpose mats provide cushion to reduce the fatigue and strain of standing while working.
Thicker than our other greaseproof antifatigue mats, these mats have more cushion for greater comfort.
Made of polyurethane foam, these mats are the ultimate in durability and comfort.
Thicker than standard antifatigue mats, these mats have more cushion for greater comfort.
Thicker than our other wear-resistant antifatigue mats, these mats have more cushion for greater comfort.
Durable and cushioned, these mats combine the comfort of an antifatigue sponge mat with wear-resistant construction.
Cushion where you stand without contaminating your line in food and pharmaceutical plants.
Reduce the strain and fatigue of standing while working in food-processing and pharmaceutical plants, as well as in clean rooms.
Rated for use in Fed. Spec. Class 100 and ISO Class 5 clean rooms, these mats release a low number of particles into the air.
Designed to repel sparks and hot metal shards, these mats are for use in welding applications.
When these sticky mats get dirty, use the cleaner to restore the dirt-grabbing surface.
These mats have an abrasive scraping surface and absorb water.
Get three zones of cleaning power in one convenient mat. Zone one is for aggressive scraping, zone two alternates stripes of scraping and drying, and zone three is for drying.
Spray these mats with a hose to remove mud and other debris.
Made of galvanized steel, these rust-resistant mats scrape off stubborn mud and snow.
Topped with carpet, these mats provide excellent moisture absorption.
These mats have an abrasive fiber surface to scrape off dirt, mud, and snow.
Gripping teeth on the bottom hold these mats in place on carpet.
Use these mats to drain static that can harm sensitive equipment.
These mats have a smooth backing for use on hard floor surfaces.
Tested to withstand the stated dielectric test voltage, these mats protect workers from electrical shock when working around high-voltage equipment.
Decontaminate your shoes before entering clean environments. These mats have raised edges so they can be filled with disinfecting solution.
Protect sensitive clean room electronics from harmful static charges. Commonly used in pharmaceutical and laboratory Fed. Std. Class 100 and ISO Class 5 clean rooms, these mats release a low number of particles into the air.
Use these antistatic, static-dissipative, or conductive mats to prevent static discharge that can harm sensitive electronics and equipment.
Encourage social distancing in areas where adhesive floor decals can't be used or where waiting-line locations often change.
Integrated connectors allow you to link mats together to create the size and shape you need.
These mats are designed to absorb shock from falling objects and protect floors as well as equipment. They stand up to prolonged loads and are often used to store heavy industrial parts.
Add permanent slip resistance to floors, ramps, stairs, and docks with these solid plates.
Openings in the surface allow dust, dirt, and liquids to pass through.
With a raised disc surface that can be felt with feet and canes, these tiles alert individuals with visual impairments to an upcoming intersection or an edge of a walkway.
Often used in stairwells and hallways, these tiles have a raised-disc surface that provides traction and is easy to clean.
A blend of aramid and fiberglass, this fabric resists mildew and abrasion. It is self-extinguishing and won't melt, so it's often used for insulation applications.
The PTFE coating makes these fiberglass sheets nonstick and chemical resistant.
With larger openings than porous fiberglass fabric, these sheets allow for more air circulation in drying applications.
These sheets are 50% more tear resistant than other fiberglass fabric sheets.
These sheets can be grounded to reduce static electricity.
Pores allow for air circulation, so these sheets are often used in drying applications.
These absorbent grips are made of polyurethane-coated nylon fabric for a secure, dry-feel hold even when hands are sweaty.
The adhesive backing keeps these grips in place. Made of EPDM foam, they are three times thicker than standard wrap-on grips to insulate and cushion vibration.
Thicker than standard wrap-on grips, these cushioned grips are made of EPDM foam to insulate and cushion vibration.
Wrap around ladder handrails for a solid grip.
Just like a gecko clings to a wall, this tape has microscopic fingers to grip smooth surfaces. It removes cleanly and can be reused.
Also known as roller tape, this tape is coated with silicone to grip smooth surfaces and resist sticky substances, such as ink. It adheres to itself without adhesive.
This traditional black cotton electrician's tape provides an abrasion-resistant shield for wrapping low-voltage splices.