A nozzle and hose allow you to dispense directly into your container. For on-site diesel fuel dispensing at construction sites, on boats, and in other environments without electrical hookups, attach these portable pumps to any 12-volt battery.

These pumps are C-UL listed for use in environments with flammable gases and combustible dust. Operating on a 12-volt battery, use them to transfer and drain fuel such as gasoline, diesel fuel, and kerosene.

The foot pedal allows hands-free operation.

Pump fuel such as gasoline, kerosene, and diesel fuel.

Control the flow while dispensing diesel fuel with these nozzles.

To avoid contaminating diesel exhaust fluid (DEF), these nozzles are made of anodized aluminum and have a stainless steel spout.

Dispense chemicals from a line that attaches and detaches from your drum or intermediate bulk container (IBC) in seconds. These nozzles and the included hose come with fittings that connect when you insert the plug into the socket and push the levers down.

Bend this hose in any direction and it won’t kink, even when routed through tight spaces.

Maintain the purity of diesel exhaust fluid (DEF) as you move it from tanker trucks to storage tanks. The fittings make it easy to connect and disconnect the line.

Use this conductive hose in a grounded system to eliminate static buildup. The material is blended with carbon black, which conducts static charges away from the hose walls.

Transfer fuel oil with a hose that stays flexible in subzero conditions.

This hose meets CGA (Compressed Gas Association) standards for use with oxygen and acetylene gas.

Yarn reinforcement gives this hose good strength under pressure.

This tubing can handle the highest temperatures of all of our fuel and lubricant tubing. Use it in applications up to 450° F.

With the best oil resistance of all our fuel and lubricant tubing, this tubing won’t deteriorate or become brittle when exposed to oil—even with long-term use.

A lightweight alternative to stainless steel, this tubing can handle extreme-pressure applications up to 1,000 psi.

Use this resilient tubing in high-temperature chemical applications up to 400° F.

Ultraviolet light won’t cause this tubing to degrade or deteriorate.

Keep your work site safe and clutter free—this coiled tubing extends when you need it and retracts out of the way when you don't.

Made of highly chemical-resistant materials, this tubing withstands harsh chemicals such as hydrochloric acid, sodium hydroxide, and sulfuric acid.

Run chemicals through this tubing at temperatures between -100° F and 500° F.

Aluminum tubing is lightweight with good corrosion resistance and weldability.

This tubing has special markings to identify it as a gas line.

These tanks are typically used for storing fuel and waste oil.

No need for separate spill-control pallets or trays—comply with EPA regulations for storing hazardous liquids with just one tank.

Tip cans down for controlled dispensing, then swing them back to their upright position.

Also known as Type II safety cans, these have two openings—one for filling, one for pouring.