Mounting Location Mounting Location |
|---|
|
|
Airflow @ Static Pressure Airflow @ Static Pressure |
|---|
Volume Volume |
|---|
Current Current |
|---|
Overall Depth Overall Depth |
|---|
|
|
|
Overall Width Overall Width |
|---|
|
|
|
Overall Height Overall Height |
|---|
|
|
|
Motor Enclosure Type Motor Enclosure Type |
|---|
|
About Calculating the Airflow Required for Air Cleaning
More
Portable Fume Exhausters
In addition to using the handle to carry these exhausters, you can mount them to a wall, bench, or floor. They remove fumes, vapors, and fine dust particles from your space. They are commonly used in welding, soldering, and other operations that create fumes. All have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments. They have a flexible hose with nozzle to capture fumes at the source and rubber pads on the base to reduce vibration.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Single-duct kits (sold separately) include a hose, a nozzle, and two clamps to replace existing components.
Double-duct kits (sold separately) create two points for fume collection, although each will have lower airflow than the one collection point of a single-duct kit. These kits include two hoses, two nozzles, four clamps, and a wye connector.
Overall | Nozzle | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Airflow @ Static Pressure | Volume | Power, hp | Inlet Dia. | Outlet Dia. | Ht. | Wd. | Dp. | Ht. | Wd. | Housing Material | Mount. Fasteners Included | Mount. Hole Dia. | Each | |
120V AC, Single Phase—Plug | ||||||||||||||
| 280 cfm @ 1 1/2 in. of H₂O 330 cfm @ 1/4 in. of H₂O 345 cfm @ 0 in. of H₂O | 62 dB @ 15 ft. | 1/2 | 4" | 4" | 18 3/4" | 17 1/2" | 16" | 4" | 8" | Steel | No | 7/16" | 0000000 | 0000000 |
| 310 cfm @ 1/4 in. of H₂O 335 cfm @ 0 in. of H₂O | 59 dB @ 15 ft. | 1/4 | 6" | 6" | 17 7/8" | 13 3/4" | 18 1/4" | 8" | 8" | Aluminum | No | 7/16" | 0000000 | 000000 |
| 575 cfm @ 1 1/2 in. of H₂O 655 cfm @ 1/4 in. of H₂O 670 cfm @ 0 in. of H₂O | 59 dB @ 15 ft. | 1 | 6" | 6" | 17 7/8" | 13 3/4" | 18 1/4" | 8" | 8" | Aluminum | No | 7/16" | 0000000 | 000000 |
120/230V AC, Single Phase—Hardwire | ||||||||||||||
| 730 cfm @ 1 1/2 in. of H₂O 795 cfm @ 1/4 in. of H₂O 810 cfm @ 0 in. of H₂O | 73 dB @ 15 ft. | 1 1/2 | 6" | 6" | 21 3/8" | 21 1/2" | 16 1/2" | 8" | 8" | Steel | No | 7/16" | 0000000 | 000000 |
230/460V AC, Three Phase—Hardwire | ||||||||||||||
| 280 cfm @ 1 1/2 in. of H₂O 330 cfm @ 1/4 in. of H₂O 345 cfm @ 0 in. of H₂O | 62 dB @ 15 ft. | 1/2 | 4" | 4" | 18 3/4" | 17 1/2" | 16" | 4" | 8" | Steel | No | 7/16" | 0000000 | 000000 |
| 310 cfm @ 1/4 in. of H₂O 335 cfm @ 0 in. of H₂O | 59 dB @ 15 ft. | 1/4 | 6" | 6" | 17 7/8" | 13 3/4" | 18 1/4" | 8" | 8" | Aluminum | No | 7/16" | 0000000 | 000000 |
| 575 cfm @ 1 1/2 in. of H₂O 655 cfm @ 1/4 in. of H₂O 670 cfm @ 0 in. of H₂O | 59 dB @ 15 ft. | 1 | 6" | 6" | 17 7/8" | 13 3/4" | 18 1/4" | 8" | 8" | Aluminum | No | 7/16" | 0000000 | 000000 |
| 730 cfm @ 1 1/2 in. of H₂O 795 cfm @ 1/4 in. of H₂O 810 cfm @ 0 in. of H₂O | 73 dB @ 15 ft. | 1 1/2 | 6" | 6" | 21 3/8" | 21 1/2" | 16 1/2" | 8" | 8" | Steel | No | 7/16" | 0000000 | 000000 |
Floor-Mount Fume Exhausters
Remove fumes, vapors, and fine dust particles from your space. These exhausters are commonly used in welding, soldering, and other operations that create fumes.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Use open dripproof exhausters in relatively clean, dry, well-ventilated indoor locations.
Totally enclosed exhausters have an external fan for cooling. These exhausters offer more protection than open dripproof exhausters. They can be used in dirty, dusty, and damp environments, but are not airtight.
Single-duct kits (sold separately) maximize airflow at one fume collection point. They include a hose, a nozzle, and two clamps.
Double-duct kits (sold separately) create two points for fume collection, although each will have lower airflow than the one collection point of a single-duct kit. These kits include two hoses, two nozzles, four clamps, and a wye connector.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Airflow @ Static Pressure | Volume | Power, hp | Inlet Dia. | Outlet Dia. | Ht. | Wd. | Dp. | Housing Material | Base Material | Mount. Fasteners Included | Mount. Hole Dia. | Each | |
Open Dripproof | |||||||||||||
120V AC,Single Phase—Hardwire | |||||||||||||
| 800 cfm @ 1/2 in. of H₂O | 65 dB @ 15 ft. | 1/3 | 6" | 6" | 15 1/8" | 16" | 20 3/8" | Galvanized Steel | Steel | No | 9/32" | 000000 | 0000000 |
Totally Enclosed | |||||||||||||
120V AC,Single Phase—Plug | |||||||||||||
| 350 cfm @ 1/2 in. of H₂O | 68 dB @ 15 ft. | 1/2 | 4" | 4" | 18 7/8" | 15 3/8" | 15 1/4" | Black Powder-Coated Steel | Steel | No | 7/16" | 00000000 | 000000 |
| 450 cfm @ 1/2 in. of H₂O | 64 dB @ 15 ft. | 1/4 | 6" | 6" | 16 3/8" | 12 1/4" | 16" | Aluminum | Steel | No | 7/16" | 00000000 | 000000 |
| 605 cfm @ 1/2 in of H₂O | 74 dB @ 15 ft. | 3/4 | 6" | 6" | 16 3/8" | 12 1/4" | 15 7/8" | Aluminum | Steel | No | 7/16" | 00000000 | 000000 |
| 755 cfm @ 1/2 in. of H₂O | 72 dB @ 15 ft. | 3/4 | 6" | 6" | 20 1/4" | 17" | 15 3/4" | Black Powder-Coated Steel | Steel | No | 7/16" | 00000000 | 000000 |
230V AC,Single Phase—Hardwire | |||||||||||||
| 1,135 cfm @ 1/2 in. of H₂O | 78 dB @ 15 ft. | 3 | 6" | 6" | 22 7/8" | 19 1/8" | 18 1/4" | Black Powder-Coated Steel | Steel | No | 7/16" | 00000000 | 00000000 |
120/230V AC,Single Phase—Hardwire | |||||||||||||
| 855 cfm @ 1/2 in. of H₂O | 74 dB @ 15 ft. | 1 1/2 | 6" | 6" | 22 7/8" | 19 1/8" | 17 1/8" | Black Powder-Coated Steel | Steel | No | 7/16" | 00000000 | 00000000 |
| 955 cfm @ 1/2 in. of H₂O | 76 dB @ 15 ft. | 2 | 6" | 6" | 22 7/8" | 19 1/8" | 18" | Black Powder-Coated Steel | Steel | No | 7/16" | 00000000 | 00000000 |
| 1,045 cfm @ 1/2 in. of H₂O | 75 dB @ 15 ft. | 1 1/2 | 6" | 6" | 16 3/8" | 12 1/4" | 18" | Aluminum | Steel | No | 7/16" | 00000000 | 00000000 |
| 1,615 cfm @ 1/2 in. of H₂O | 72 dB @ 15 ft. | 2 | 8" | 8" | 21 1/2" | 14 7/8" | 18 5/8" | Aluminum | Steel | No | 7/16" | 00000000 | 00000000 |
230/460V AC,Three Phase—Hardwire | |||||||||||||
| 350 cfm @ 1/2 in. of H₂O | 68 dB @ 15 ft. | 1/2 | 4" | 4" | 18 7/8" | 15 3/8" | 14 3/4" | Black Powder-Coated Steel | Steel | No | 7/16" | 00000000 | 000000 |
| 450 cfm @ 1/2 in. of H₂O | 64 dB @ 15 ft. | 1/4 | 6" | 6" | 16 3/8" | 12 1/4" | 15 1/4" | Aluminum | Steel | No | 7/16" | 00000000 | 000000 |
| 605 cfm @ 1/2 in of H₂O | 74 dB @ 15 ft. | 3/4 | 6" | 6" | 16 3/8" | 12 1/4" | 15 5/8" | Aluminum | Steel | No | 7/16" | 00000000 | 000000 |
| 755 cfm @ 1/2 in. of H₂O | 72 dB @ 15 ft. | 3/4 | 6" | 6" | 20 1/4" | 17" | 15 1/8" | Black Powder-Coated Steel | Steel | No | 7/16" | 00000000 | 000000 |
| 855 cfm @ 1/2 in. of H₂O | 74 dB @ 15 ft. | 1 1/2 | 6" | 6" | 22 7/8" | 19 1/8" | 17 1/8" | Black Powder-Coated Steel | Steel | No | 7/16" | 00000000 | 00000000 |
| 955 cfm @ 1/2 in. of H₂O | 76 dB @ 15 ft. | 2 | 6" | 6" | 22 7/8" | 19 1/8" | 17 1/8" | Black Powder-Coated Steel | Steel | No | 7/16" | 00000000 | 00000000 |
| 1,045 cfm @ 1/2 in. of H₂O | 75 dB @ 15 ft. | 1 1/2 | 6" | 6" | 16 3/8" | 12 1/4" | 17 1/4" | Aluminum | Steel | No | 7/16" | 00000000 | 00000000 |
| 1,135 cfm @ 1/2 in. of H₂O | 78 dB @ 15 ft. | 3 | 6" | 6" | 22 7/8" | 19 1/8" | 19 7/8" | Black Powder-Coated Steel | Steel | No | 7/16" | 00000000 | 00000000 |
| 1,615 cfm @ 1/2 in. of H₂O | 72 dB @ 15 ft. | 2 | 8" | 8" | 21 1/2" | 14 7/8" | 18 1/4" | Aluminum | Steel | No | 7/16" | 00000000 | 00000000 |
| Dual-Duct Kit for Exhausters with 6" Inlet Dia. | 0000000 | Each | 0000000 |
| Single-Duct Kit for Exhausters with 6" Inlet Dia. | 0000000 | Each | 000000 |
| Single-Duct Kit for Exhausters with 4" Inlet Dia. | 0000000 | Each | 000000 |
| Dual-Duct Kit for Exhausters with 8" Inlet Dia. | 0000000 | Each | 000000 |
| Single-Duct Kit for Exhausters with 8" Inlet Dia. | 0000000 | Each | 000000 |
Suspended-Hood Fume Exhausters
Position these exhausters above drums, tanks, and distillers to remove fumes, vapors, and fine dust particles from your space. All include a pulley system to adjust the hood height. Add an optional swivel wall bracket (sold separately) for side-to-side movement.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Exhausters | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Hose | Optional Swivel Wall Bracket | ||||||||||
| Hood Dia. | Airflow @ Static Pressure | Volume | Power, hp | ID | Lg., ft. | Mounting Location | Includes | Each | Each | ||
120V AC—Plug | |||||||||||
| 27" | 400 cfm @ 0 in. of H₂O | 50 dB @ 15 ft. | 1/8 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 0000000 | 00000000 | 0000000 |
| 32" | 400 cfm @ 0 in. of H₂O | 50 dB @ 15 ft. | 1/8 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 000000 | 00000000 | 000000 |
| 37" | 400 cfm @ 0 in. of H₂O | 50 dB @ 15 ft. | 1/8 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 000000 | 00000000 | 000000 |
| 44" | 400 cfm @ 0 in. of H₂O | 50 dB @ 15 ft. | 1/8 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 000000 | 00000000 | 000000 |
Wall-Mount Fume Exhausters
Remove fumes, vapors, and fine dust particles from your space. This exhauster is commonly used in welding, soldering, and other operations that create fumes. It has an open dripproof motor enclosure for relatively clean, dry, indoor locations.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Airflow @ Static Pressure | Volume | Power, hp | Inlet Dia. | Outlet Dia. | Ht. | Wd. | Dp. | Housing Material | Base Material | Wheel Material | Mount. Fasteners Included | Mount. Hole Dia. | Each | |
120V AC—Hardwire | ||||||||||||||
| 300 cfm @ 1/2 in. of H₂O | 61 dB @ 15 ft. | 1/4 | 4" | 4" | 16" | 16" | 8 7/8" | Galvanized Steel | Steel | Steel | No | 9/32" | 000000 | 0000000 |
Positionable-Arm Fume Exhaust Hoses
Move the hose into position and the support arm will hold it in place. These hoses remove fumes, vapors, and fine dust particles from your space. They are commonly used in welding, soldering, and other operations that create fumes.
Hose | Nozzle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| ID | Lg., ft. | Material | Dia. | Material | Mount. Fasteners Included | Mount. Hole Dia. | Includes | Each | |
Ceiling and Wall Mount | |||||||||
| 4" | 4 | Rubber | 9" | Aluminum | No | 1/2" | Hose, Mounting Bracket, Nozzle | 0000000 | 000000000 |
| 4" | 6 | Rubber | 9" | Aluminum | No | 1/2" | Hose, Mounting Bracket, Nozzle | 0000000 | 00000000 |
| 4" | 8 | Rubber | 9" | Aluminum | No | 1/2" | Hose, Mounting Bracket, Nozzle | 0000000 | 00000000 |
| 6" | 7 | Neoprene-Coated Cotton/Polyester Blend Fabric | 10 3/4" | Steel | No | 7/16" | Hose, Mounting Bracket, Nozzle | 0000000 | 00000000 |
| 6" | 9 | Neoprene-Coated Cotton/Polyester Blend Fabric | 10 3/4" | Steel | No | 7/16" | Hose, Mounting Bracket, Nozzle | 0000000 | 00000000 |
| 8" | 9 | Neoprene-Coated Cotton/Polyester Blend Fabric | 12 1/2" | Steel | No | 7/16" | Hose, Mounting Bracket, Nozzle | 0000000 | 00000000 |
Swivel-Arm Fume Exhaust Hoses
For exact positioning, this hose swivels 360° to remove fumes, vapors, and fine dust particles from your space. It's commonly used in welding, soldering, and other operations that create fumes.
Hose | Nozzle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| ID | Lg., ft. | Material | Dia. | Material | Mount. Fasteners Included | Mount. Hole Dia. | Includes | Each | |
Bench and Wall Mount | |||||||||
| 3" | 5 | PVC Plastic | 5" | Powder-Coated Aluminum | No | 3/8" | Hose, Mounting Bracket, Nozzle | 0000000 | 0000000 |
Adjustable-Length Fume Exhaust Hoses
The arm length adjusts from 3 to 6 feet making these exhaust hoses good for locations with low ceilings. Use these hoses to remove fumes, vapors, and fine dust particles from your space. They are commonly used in welding, soldering, and other operations that create fumes.
Hose | Nozzle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| ID | Lg., ft. | Material | Dia. | Material | Mount. Fasteners Included | Mount. Hole Dia. | Includes | Each | |
Ceiling Mount | |||||||||
| 6 1/4" | 3-6 | PVC-Coated Nylon Plastic | 11 3/4" | Powder-Coated Steel | No | 1/2" | Hose, Mounting Bracket, Nozzle | 0000000 | 000000000 |
Suspended-Hood Hazardous Location Fume Exhausters
Position these exhausters above drums, tanks, and distillers to remove fumes, vapors, and fine dust particles from your space. All have a motor that is UL listed for Class I, Groups C and D and Class II, Groups F and G locations. Exhausters include a pulley system to adjust the hood height. Add an optional swivel wall bracket (sold separately) for side-to-side movement.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Exhausters | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Hose | Optional Swivel Wall Bracket | ||||||||||
| Hood Dia. | Airflow @ Static Pressure | Volume | Power, hp | ID | Lg., ft. | Mounting Location | Includes | Each | Each | ||
120/230V AC—Hardwire | |||||||||||
| 27" | 400 cfm @ 0 in. of H₂O | 59 dB @ 15 ft. | 1/2 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 000000000 | 00000000 | 0000000 |
| 32" | 400 cfm @ 0 in. of H₂O | 59 dB @ 15 ft. | 1/2 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 00000000 | 00000000 | 000000 |
| 37" | 400 cfm @ 0 in. of H₂O | 59 dB @ 15 ft. | 1/2 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 00000000 | 00000000 | 000000 |
| 44" | 400 cfm @ 0 in. of H₂O | 59 dB @ 15 ft. | 1/2 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 00000000 | 00000000 | 000000 |
Wall-Mount Hazardous Location Fume Exhausters
This fume exhauster has a motor that is UL listed for Class I, Groups C and D; Class II, Groups E, F, and G locations. Use it to remove fumes, vapors, and fine dust particles from your space. It is commonly used in welding, soldering, and other operations that create fumes.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Airflow @ Static Pressure | Volume | Power, hp | Inlet Dia. | Outlet Dia. | Ht. | Wd. | Dp. | Housing Material | Base Material | Wheel Material | Mount. Fasteners Included | Mount. Hole Dia. | Each | |
120V AC—Hardwire | ||||||||||||||
| 300 cfm @ 1/2 in. of H₂O | 61 dB @ 15 ft. | 1/4 | 4" | 4" | 16" | 17 5/8" | 8 7/8" | Galvanized Steel | Steel | Aluminum | No | 9/32" | 000000 | 0000000 |
Floor-Mount Hazardous Location Fume Exhausters
This fume exhauster has a motor that is UL listed for Class I, Groups C and D; Class II, Groups E, F, and G locations. Use it to remove fumes, vapors, and fine dust particles from your space. It is commonly used in welding, soldering, and other operations that create fumes.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Airflow @ Static Pressure | Volume | Power, hp | Inlet Dia. | Outlet. Dia. | Ht. | Wd. | Dp. | Housing Material | Base Material | Wheel Material | Mount. Fasteners Included | Mount. Hole Dia. | Each | |
120V AC—Hardwire | ||||||||||||||
| 800 cfm @ 1/2 in. of H₂O | 65 dB @ 15 ft. | 1/3 | 6" | 6" | 15 1/8" | 18 1/4" | 20 3/8" | Galvanized Steel | Steel | Aluminum | No | 9/32" | 000000 | 0000000 |
3D Printer Portable Air Cleaners
Draw particles and filament fumes away from open-frame 3D printers without cooling off printed parts. Unlike standard air cleaners, which create airflow strong enough to cool the print area and warp your parts, these low-airflow cleaners won’t disrupt your print. A three-part filtering process keeps you from breathing harmful emissions: a prefilter traps large particles, then a combination HEPA and activated carbon filter captures both fine particles and fumes. These CE marked cleaners meet health, safety, and environmental protection standards for products.
Attach the included hose and funnel to the cleaner to pull fumes directly from your printer. These compact, lightweight cleaners fit into most work areas, and are quiet enough for office use. The powder-coated steel housing holds up over a long service life.
Overall | Hose | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Airflow, cfm | Volume | Current, A | Voltage | For Inlet Duct Dia. | Ht. | Wd. | Dp. | Housing Material | Lg., ft. | Material | Cord Lg., ft. | Includes | Each | |
| 26 | 44 dB @ 3 ft. | 0.2 | 120V AC | 2" | 13 1/4" | 11 1/4" | 11" | Powder-Coated Steel | 6 | Plastic | 6 | Combination HEPA/Chemical Filter (Captures 99.99% of particles down to 0.03 microns), Disposable Prefilter | 0000000 | 0000000 |
3D Printer Air Filtering and Conditioning Enclosures
Protect the health of nearby workers and maintain ideal operating conditions for your 3D printer. To keep your workspace's air clean, these enclosures filter harmful fumes, VOCs, and ultrafine particles that are common when working with filaments such as ABS and nylon. The enclosure's door is sealed with silicone rubber to keep fumes inside the enclosure.
Control Your Printing Environment
Because printing conditions that are too cold make weak parts, these enclosures retain the heat created by the printer. The warmth gives the printed layers time to strengthen and bond before cooling. Set the thermal overload protection, and you won't have to worry about the enclosure overheating. If the enclosure gets too warm, a sensor cuts power to the printer to avoid failed prints and dangerous conditions. It's also known as a thermal runaway cutoff.
Manage the enclosure's various settings—filter status, temperature shutoff, fan speed, lights, and WiFi—from the enclosure's touchscreen. The screen also displays the moisture level inside the enclosure. Add a dehumidifier cartridge (sold separately) or other desiccant to keep your filament dry, strong, and flexible. Dehumidifier cartridges have rechargeable desiccant beads. When the desiccant beads change from orange to green, heat them in the microwave to recharge.
Connect To Your Computer
Connect the printer to a computer using the through-wall USB port, and the enclosure stays sealed. The printer connects to the port on one side of the wall, and the computer connects on the other. A similar port connects your printer's power cord. Safely check on the progress of your prints from your computer using the video camera.
Protect Your Printer and Prints
Lightweight and strong, these enclosures have an aluminum frame, honeycomb floor, and clear, impact-resistant windows. A lock on the door prevents unwanted users from accessing your printer and work.
Specifications Met
Made to high domestic and international safety standards, these enclosures are UL certified and CE marked. The filter system meets UL 94V0 for flame resistance.
Overall | Inside | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Airflow, cfm | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Filter Efficiency | Removes Particle Size Down To, microns | Environment Temp. Range | Includes | Specifications Met | For Removing | Assembled or Unassembled | Each | |
120V AC/240V AC—Three-Prong Plug | |||||||||||||||
Powder-Coated Aluminum—Silicone Rubber Seal | |||||||||||||||
| 150 | 37 3/8" | 31 1/2" | 31 7/8" | 31 7/8" | 23 5/8" | 23 5/8" | 99.95% | 0.015 | 16° C to 27° C 60° F to 80° F | Disposable After-Filter, Disposable HEPA Filter, Tool Kit | CE Marked, UL 94V0, UL Certified | Dust and Particles, Odors and Fumes | Assembled | 0000000 | 000000000 |
| 150 | 37 3/8" | 40 1/8" | 40 1/8" | 31 7/8" | 31 7/8" | 31 7/8" | 99.95% | 0.015 | 16° C to 27° C 60° F to 80° F | Disposable After-Filter, Disposable HEPA Filter, Tool Kit | CE Marked, UL 94V0, UL Certified | Dust and Particles, Odors and Fumes | Assembled | 0000000 | 00000000 |