Create a complete Harris torch or replace parts with our selection of handles, mixers, welding tips, cutting attachments, and cutting tips.

These rods make stronger welds than standard gas welding rods for steel.

Weld and cut with one system. Kits include single-stage regulators, a torch with check valves to prevent the reverse flow of gas, a torch handle, a cutting attachment, a welding nozzle, a cutting tip, a torch lighter, glasses, and hose.

Grind these electrodes to your exact specifications.

These electrodes come with a 20° angle on both ends.

Grind these electrodes to your exact specifications.

These electrodes come with a 20° angle on both ends.

The gas valve allows you to control the gas flow at your torch instead of at the machine.

Attach TIG torch nozzles to TIG torches with these collet bodies.

Hold your tungsten electrode in place during TIG welding with these collets.

Direct the flow of shielding gas to your weld with these nozzles.

Heat your electrode and dip it into the jar to create a point.

Attach this light to the neck of your welding torch to illuminate the weld area.

Use this wire on steel sheets.

This wire is an alternative to EniFe-Ci covered electrodes.

This ER4043 wire is for aluminum 43, 356, 3003, 3004, 5052, 6061, and 6063.

Increase the wear resistance of your base metal, or restore a worn-down surface with this wire.

This wire creates stronger welds than standard MIG welding wire for steel.

Keep torch tips clear for a pinpoint flame.

To apply this antispatter, also known as tip-dip, dunk your MIG gun nozzle into the container.

Antispatter resists heat and keeps weld spatter from sticking to contact tips, nozzles, and welding accessories.

Measure internal misalignment of pipe ID, pipe wall thickness after tack welding, and go/no-go fit-up gap.

For less waste, these holders grasp the electrode close to the end.

Protect your stick electrodes during transport.

Transfer electrodes from a holding oven to the job site.

Speed up weld removal, edge preparation, gouging, and repairs when you use a holder with your carbon-gouging electrodes.

Protect your arms and chest from heat and sparks when welding.

These aprons extend to the ankles and wrap around each leg, providing better coverage and allowing for better mobility than other aprons.

Shorter than coats, jackets cover your hips.

Protect the front of your legs against radiant heat, flames, and welding sparks. Made of flexible leather, these chaps resist cuts and abrasion.

Made of cotton, these coveralls are treated to protect against low radiant heat and minor sparks when welding.

These face masks are double-layered to protect your head from radiant heat, flames, and welding sparks.

Protect your torso and thighs from heat and sparks when welding.

These glasses protect your eyes from harmful infrared light while welding. Magnifying lenses enhance details up to 163% larger to make them easier to see.

These lenses automatically switch from light to dark the instant you start welding.

Replace the filter lens on your welding helmet or goggles; available in shade numbers 4 through 12.

These glasses protect your eyes from harmful infrared light while welding. The curved design sits close to the face.

Designed for continuous-use welding, these goggles protect your eyes from harmful infrared light.

These glasses protect your eyes from harmful infrared light while welding. The lens extends around the temple for additional eye coverage.

Providing greater safety while welding than face shields, these helmets have an outer filter lens cover for protection from scratches and weld spatter.

These flame-resistant cots protect your finger from welding sparks and spatter, molten metal, and high heat up to 1800° F.

Use these gloves to shield your hands from welding sparks and spatter.

Designed for TIG welding, these gloves are thinner than MIG gloves for more flexibility and sensitivity.

Designed to fit easily under welding helmets. Replace the filter when breathing through these respirators becomes difficult.

Tighten the screw with a ¼" hex key wrench for a more secure connection than Hammer-On Welding Lugs.

Solder these lugs in place, or use a crimping block and punch for the most secure connection of any of the welding lugs we offer.

Deliver power to welding cable. These connectors withstand the high temperatures and high current found in welding applications.

Turn the handle to tighten these multipurpose tools for strong clamping in nearly any application.

Plastic clamping surfaces prevent damage to material.

All components of these clamps are made of aluminum-bronze that is Factory Mutual approved. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made entirely of fiberglass, these clamps won’t transmit electricity and are chemical resistant. They're often used around electrical equipment as well as in plating and anodizing applications.

Three screws apply pressure to three sides of a workpiece.

The clamp body is extra-slim to fit into narrow openings.

Plastic clamping surfaces prevent damage to material.

Apply pressure to the side of a workpiece as well as the top and bottom.