For Hole Diameter For Hole Diameter |
|---|
Shape Shape |
|---|
 |  |
| Round | Gasket/Washer |
 | |
| Oblong |
For Use On For Use On |
|---|
|
|
Individual/Set Individual/Set |
|---|
|
Length Length |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Container Type Container Type |
|---|
|
Hammer-Driven Hole Punches
Strengthened edges cut holes in soft metal. These punches are also known as arch punches.
For technical drawings and 3-D models, click on a part number.
| For Hole Dia. | Lg. | Material | Each | |
For Use On Brass, Copper, Fabric, Leather, Rubber | ||||
|---|---|---|---|---|
| 3/16" | 4 1/2" | Steel | 0000000 | 000000 |
| 1/4" | 4 1/2" | Steel | 0000000 | 00000 |
| 5/16" | 4 1/2" | Steel | 0000000 | 00000 |
| 3/8" | 4 5/8" | Steel | 0000000 | 00000 |
| 7/16" | 4 3/4" | Steel | 0000000 | 00000 |
| 1/2" | 4 7/8" | Steel | 0000000 | 00000 |
| 9/16" | 4 7/8" | Steel | 0000000 | 00000 |
| 5/8" | 5" | Steel | 0000000 | 00000 |
| 11/16" | 5" | Steel | 0000000 | 00000 |
| 3/4" | 5 1/8" | Steel | 0000000 | 00000 |
| 13/16" | 5 1/8" | Steel | 0000000 | 00000 |
| 7/8" | 5 1/4" | Steel | 0000000 | 00000 |
| 15/16" | 5 1/4" | Steel | 0000000 | 00000 |
| 1" | 5 3/8" | Steel | 0000000 | 00000 |
| 1 1/16" | 5 5/8" | Steel | 0000000 | 00000 |
| 1 1/8" | 5 5/8" | Steel | 0000000 | 00000 |
| 1 3/16" | 5 5/8" | Steel | 0000000 | 00000 |
| 1 1/4" | 5 3/4" | Steel | 0000000 | 00000 |
| 1 5/16" | 5 3/4" | Steel | 0000000 | 00000 |
| 1 3/8" | 5 7/8" | Steel | 0000000 | 00000 |
| 1 7/16" | 5 7/8" | Steel | 0000000 | 00000 |
| 1 1/2" | 6" | Steel | 0000000 | 00000 |
| 1 5/8" | 6 1/4" | Steel | 0000000 | 000000 |
| 1 3/4" | 6 3/8" | Steel | 0000000 | 000000 |
| 1 7/8" | 6 7/8" | Steel | 0000000 | 000000 |
| 2" | 7" | Steel | 0000000 | 000000 |
| 2 1/8" | 7 3/8" | Steel | 0000000 | 000000 |
| 2 1/4" | 7 3/8" | Steel | 0000000 | 000000 |
| 2 3/8" | 7 3/8" | Steel | 0000000 | 000000 |
| 2 1/2" | 6 3/4" | Steel | 0000000 | 000000 |
| 2 5/8" | 6 3/4" | Steel | 0000000 | 000000 |
| 2 3/4" | 6 3/4" | Steel | 0000000 | 000000 |
| 2 7/8" | 6 3/4" | Steel | 0000000 | 000000 |
| 3" | 6 3/4" | Steel | 0000000 | 000000 |
| 3 1/8" | 6 3/4" | Steel | 0000000 | 000000 |
| 3 1/4" | 6 3/4" | Steel | 0000000 | 000000 |
| 3 3/8" | 8 1/2" | Steel | 0000000 | 000000 |
| 3 1/2" | 8 1/2" | Steel | 0000000 | 000000 |
| 3 5/8" | 8 1/2" | Steel | 0000000 | 000000 |
| 3 3/4" | 8 1/2" | Steel | 0000000 | 000000 |
| 3 7/8" | 8 1/2" | Steel | 0000000 | 000000 |
| 4" | 8 1/2" | Steel | 0000000 | 000000 |
| 2mm | 4 1/4" | Steel | 0000000 | 00000 |
| 3mm | 4 3/8" | Steel | 0000000 | 00000 |
| 4mm | 4 3/8" | Steel | 0000000 | 00000 |
| 5mm | 4 3/8" | Steel | 0000000 | 00000 |
| 6mm | 4 1/2" | Steel | 000000 | 00000 |
| 7mm | 4 1/2" | Steel | 000000 | 00000 |
| 8mm | 4 1/2" | Steel | 000000 | 00000 |
| 9mm | 4 3/4" | Steel | 000000 | 00000 |
| 10mm | 4 7/8" | Steel | 000000 | 00000 |
| 11mm | 4 7/8" | Steel | 0000000 | 00000 |
| 12mm | 4 7/8" | Steel | 0000000 | 00000 |
| 13mm | 5 1/2" | Steel | 0000000 | 00000 |
| 14mm | 5 1/2" | Steel | 0000000 | 00000 |
| 15mm | 5 1/2" | Steel | 0000000 | 00000 |
| 16mm | 5 1/2" | Steel | 0000000 | 00000 |
| 17mm | 5 1/2" | Steel | 0000000 | 00000 |
| 18mm | 5 1/2" | Steel | 0000000 | 00000 |
| 19mm | 5 1/2" | Steel | 0000000 | 00000 |
| 20mm | 5 1/2" | Steel | 000000 | 00000 |
| 21mm | 5 3/8" | Steel | 0000000 | 00000 |
| 22mm | 5 1/2" | Steel | 0000000 | 00000 |
| 23mm | 5 1/2" | Steel | 0000000 | 00000 |
| 24mm | 5 1/2" | Steel | 0000000 | 00000 |
| 25mm | 5 7/8" | Steel | 0000000 | 00000 |
| 26mm | 5 7/8" | Steel | 0000000 | 00000 |
| 27mm | 5 3/8" | Steel | 0000000 | 00000 |
| 28mm | 6" | Steel | 0000000 | 00000 |
| 29mm | 5 7/8" | Steel | 0000000 | 00000 |
| 30mm | 5 7/8" | Steel | 000000 | 00000 |
| 31mm | 5 3/4" | Steel | 0000000 | 00000 |
| 32mm | 6 1/8" | Steel | 0000000 | 00000 |
| 33mm | 6" | Steel | 0000000 | 000000 |
| 34mm | 6" | Steel | 0000000 | 000000 |
| 35mm | 6 1/2" | Steel | 0000000 | 000000 |
| 36mm | 6 3/8" | Steel | 0000000 | 000000 |
| 37mm | 6 3/8" | Steel | 0000000 | 000000 |
| 38mm | 6 5/8" | Steel | 0000000 | 000000 |
| 39mm | 6 5/8" | Steel | 0000000 | 000000 |
| 40mm | 6 1/2" | Steel | 000000 | 000000 |
| 41mm | 6 3/8" | Steel | 0000000 | 000000 |
| 42mm | 6 3/8" | Steel | 0000000 | 000000 |
| 43mm | 6 3/8" | Steel | 0000000 | 000000 |
| 44mm | 7 1/4" | Steel | 0000000 | 000000 |
| 45mm | 7 1/8" | Steel | 0000000 | 000000 |
| 46mm | 7 1/8" | Steel | 0000000 | 000000 |
| 47mm | 6 3/4" | Steel | 0000000 | 000000 |
| 48mm | 7" | Steel | 0000000 | 000000 |
| 49mm | 6 7/8" | Steel | 0000000 | 000000 |
| 50mm | 7 1/2" | Steel | 000000 | 000000 |
| 51mm | 7 1/2" | Steel | 0000000 | 000000 |
| 52mm | 7 1/2" | Steel | 0000000 | 000000 |
Hammer-Driven Small Hole Punches
Use these punches to make round holes in soft, nonmetallic materials.
For technical drawings and 3-D models, click on a part number.
| For Hole Dia. | Lg. | Material | Each | |
For Use On Fabric, Leather, Rubber | ||||
|---|---|---|---|---|
| 1/16" | 3 3/4" | Steel | 0000000 | 000000 |
| 5/64" | 3 3/4" | Steel | 0000000 | 00000 |
| 3/32" | 3 3/4" | Steel | 0000000 | 00000 |
| 1/8" | 3 3/4" | Steel | 0000000 | 00000 |
| 9/64" | 3 3/4" | Steel | 0000000 | 00000 |
| 5/32" | 3 3/4" | Steel | 0000000 | 00000 |
| 11/64" | 3 3/4" | Steel | 0000000 | 00000 |
| 3/16" | 3 3/4" | Steel | 0000000 | 00000 |
| 13/64" | 3 3/4" | Steel | 0000000 | 00000 |
| 7/32" | 3 3/4" | Steel | 0000000 | 00000 |
| 1/4" | 3 3/4" | Steel | 0000000 | 00000 |
| 17/64" | 4 1/2" | Steel | 0000000 | 00000 |
| 9/32" | 4 1/2" | Steel | 0000000 | 00000 |
| 5/16" | 4 1/2" | Steel | 0000000 | 00000 |
| 11/32" | 4 1/2" | Steel | 0000000 | 00000 |
| 3/8" | 4 1/2" | Steel | 0000000 | 00000 |
| 13/32" | 4 1/2" | Steel | 0000000 | 00000 |
| 7/16" | 4 1/2" | Steel | 0000000 | 00000 |
| 1/2" | 4 3/4" | Steel | 0000000 | 00000 |
| 9/16" | 5" | Steel | 0000000 | 00000 |
| 5/8" | 5" | Steel | 0000000 | 00000 |
| 3/4" | 5" | Steel | 0000000 | 00000 |
| 13/16" | 5" | Steel | 0000000 | 00000 |
| 7/8" | 5" | Steel | 0000000 | 00000 |
| 1" | 5" | Steel | 0000000 | 00000 |
| 2mm | 3 3/4" | Steel | 0000000 | 00000 |
| 3mm | 3 3/4" | Steel | 0000000 | 00000 |
| 4mm | 3 3/4" | Steel | 0000000 | 00000 |
| 5mm | 3 3/4" | Steel | 0000000 | 00000 |
| 6mm | 3 3/4" | Steel | 0000000 | 00000 |
| 7mm | 4 1/4" | Steel | 0000000 | 00000 |
| 8mm | 4 1/4" | Steel | 0000000 | 00000 |
| 9mm | 4 1/4" | Steel | 0000000 | 00000 |
| 10mm | 4 1/4" | Steel | 0000000 | 00000 |
| 11mm | 4 1/4" | Steel | 0000000 | 00000 |
| 12mm | 4 1/4" | Steel | 0000000 | 00000 |
| 13mm | 4 1/4" | Steel | 0000000 | 00000 |
| 14mm | 5" | Steel | 0000000 | 00000 |
| 15mm | 5" | Steel | 0000000 | 00000 |
| 16mm | 5" | Steel | 0000000 | 00000 |
| 18mm | 5" | Steel | 0000000 | 00000 |
| 20mm | 5" | Steel | 0000000 | 00000 |
Hammer-Driven Oblong Hole Punches
Make oblong holes in soft, nonmetallic materials. These punches are also known as arch punches.
One-Step Hammer-Driven Gasket and Washer Punch Sets
Attach two punch heads to the handle at the same time to punch a gasket or washer in a single strike.
Punch Sets
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Aluminum, Cork, Fabric, Leather, Plastic, Rubber | |||||
|---|---|---|---|---|---|
| 10 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" | Steel | Plastic Case | 00000000 | 0000000 |
| 10 Punches, Handle | 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm | Steel | Plastic Case | 00000000 | 000000 |
| 15 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/16", 1 1/8", 1 3/16" | Steel | Plastic Case | 00000000 | 000000 |
| 15 Punches, Handle | 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm | Steel | Plastic Case | 00000000 | 000000 |
| 25 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8", 1 11/16", 1 3/4", 1 7/8", 2" | Steel | Plastic Case | 00000000 | 000000 |
| 29 Punches, Handle | 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 42mm, 44mm, 46mm, 48mm, 50mm | Steel | Plastic Case | 00000000 | 000000 |
Replacement Punches
| For Hole Dia. | Material | Each | |
| 1/8" | Steel | 00000000 | 000000 |
| 3/16" | Steel | 00000000 | 00000 |
| 1/4" | Steel | 00000000 | 00000 |
| 5/16" | Steel | 00000000 | 00000 |
| 3/8" | Steel | 00000000 | 00000 |
| 7/16" | Steel | 00000000 | 00000 |
| 1/2" | Steel | 00000000 | 00000 |
| 9/16" | Steel | 00000000 | 00000 |
| 5/8" | Steel | 00000000 | 00000 |
| 3/4" | Steel | 00000000 | 00000 |
| 7/8" | Steel | 00000000 | 00000 |
| 1" | Steel | 00000000 | 00000 |
| 1 1/16" | Steel | 00000000 | 00000 |
| 1 1/8" | Steel | 00000000 | 00000 |
| 1 3/16" | Steel | 00000000 | 00000 |
| 1 1/4" | Steel | 00000000 | 00000 |
| 1 5/16" | Steel | 00000000 | 00000 |
| 1 3/8" | Steel | 00000000 | 00000 |
| 1 7/16" | Steel | 00000000 | 00000 |
| 1 1/2" | Steel | 00000000 | 00000 |
| 1 5/8" | Steel | 00000000 | 00000 |
| 1 11/16" | Steel | 00000000 | 00000 |
| 1 3/4" | Steel | 00000000 | 00000 |
| 1 7/8" | Steel | 00000000 | 00000 |
| 2" | Steel | 00000000 | 00000 |
| 2mm | Steel | 000000000 | 00000 |
| 3mm | Steel | 000000000 | 00000 |
| 4mm | Steel | 000000000 | 00000 |
| 5mm | Steel | 000000000 | 00000 |
| 6mm | Steel | 00000000 | 00000 |
| 8mm | Steel | 00000000 | 00000 |
| 10mm | Steel | 00000000 | 00000 |
| 12mm | Steel | 00000000 | 00000 |
| 14mm | Steel | 00000000 | 00000 |
| 16mm | Steel | 00000000 | 00000 |
| 18mm | Steel | 00000000 | 00000 |
| 20mm | Steel | 00000000 | 00000 |
| 22mm | Steel | 000000000 | 00000 |
| 24mm | Steel | 000000000 | 00000 |
| 26mm | Steel | 000000000 | 00000 |
| 28mm | Steel | 000000000 | 00000 |
| 30mm | Steel | 000000000 | 00000 |
| 32mm | Steel | 000000000 | 00000 |
| 34mm | Steel | 000000000 | 00000 |
| 36mm | Steel | 000000000 | 00000 |
| 38mm | Steel | 000000000 | 00000 |
| 40mm | Steel | 00000000 | 00000 |
| 42mm | Steel | 000000000 | 00000 |
| 44mm | Steel | 000000000 | 00000 |
| 46mm | Steel | 00000000 | 00000 |
| 48mm | Steel | 000000000 | 00000 |
| 50mm | Steel | 000000000 | 00000 |
Economy Hammer-Driven Gasket and Washer Punch Sets
This set includes common ID and OD sizes to create gaskets and washers in two strikes.
For technical drawings and 3-D models, click on a part number.
Punch Sets
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Brass, Cork, Fabric, Leather, Plastic, Rubber | |||||
|---|---|---|---|---|---|
| 10 Punches, Handle | 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1" | Steel | Plastic Case | 0000000 | 000000 |
Quick-Release Hammer-Driven Gasket and Washer Punch Sets
Quickly switch between inner and outer punches to create washers faster than with standard sets.
For technical drawings and 3-D models, click on a part number.
Punch Sets
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Cork, Fabric, Fiberglass, Leather, Plastic, Rubber | |||||
|---|---|---|---|---|---|
| 7 Punches, Centering Pin, Handle, Punch Cutting Pad | 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" | Steel | Plastic Case | 0000000 | 0000000 |
| 13 Punches, Centering Pin, Handle, Punch Cutting Pad | 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" | Steel | Plastic Case | 0000000 | 000000 |
Self-Aligning Hammer-Driven Gasket and Washer Punch Sets for Thin Materials
For accurate punching of inner and outer holes, these sets come with pilots that attach to the outer hole punch.
| Includes | For Hole Dia. | Pilot Dia. | For Max. Steel Thick. | Material | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Cork, Fiberglass, Iron, Leather, Plastic, Rubber, Stainless Steel, Steel | |||||||
|---|---|---|---|---|---|---|---|
| 4 Punches, 4 Pilots | 7/8", 1", 1 1/8", 1 1/4" | 3/4", 7/8", 1", 1 1/8" | 1/64" | Steel | Plastic Case | 0000000 | 0000000 |
| 9 Punches, 8 Pilots | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" | 1/64" | Steel | Plastic Case | 0000000 | 000000 |
| 10 Punches, 9 Pilots | 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 16mm, 20mm | 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 16mm | 0.6mm | Steel | Plastic Case | 0000000 | 000000 |
Hammer-Driven Gasket and Washer Punch Sets for Thin Materials
Slide thin sheets of material into the included die block then punch an inner and outer hole to create a shim or washer.
| Includes | For Hole Dia. | For Max. Steel Thick. | Material | Container Type | Each | |
For Use On Aluminum, Brass, Copper, Cork, Fabric, Fiberglass, Iron, Leather, Plastic, Rubber, Stainless Steel, Steel | ||||||
|---|---|---|---|---|---|---|
| 9 Punches | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" | 1/64" | Steel | Plastic Case | 0000000 | 0000000 |
| 9 Punches | 3.5mm, 5mm, 7mm, 8.5mm, 10mm, 11.5mm, 13.5mm, 16.5mm, 19.5mm | 0.6mm | Steel | Plastic Case | 0000000 | 000000 |
Hammer-Driven Hole Punch Sets
The handle and punch are one complete tool.
For technical drawings and 3-D models, click on a part number.
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Cork, Fabric, Leather, Rubber | |||||
|---|---|---|---|---|---|
| 6 Punches | 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" | Steel | Plastic Pouch | 0000000 | 000000 |
| 6 Punches | 1/2", 9/16", 5/8", 3/4", 7/8", 1" | Steel | Plastic Pouch | 0000000 | 000000 |
For Use On Brass, Copper, Fabric, Leather, Rubber | |||||
| 5 Punches, 5"-Lg. Awl, 7"-Lg. Snips with a 1 3/4" Cut Length | 1/4", 3/8", 1/2", 5/8", 3/4" | Steel | Nylon Pouch | 0000000 | 000000 |
| 5 Punches | 1 1/16", 1 1/4", 1 3/8", 1 5/8", 1 3/4" | Steel | Nylon Pouch | 0000000 | 000000 |
| 7 Punches | 3/16", 5/16", 7/16", 9/16", 11/16", 13/16", 15/16" | Steel | Nylon Pouch | 0000000 | 000000 |
| 7 Punches | 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" | Steel | Nylon Pouch | 0000000 | 000000 |
For Use On Brass, Copper, Cork, Fabric, Leather, Rubber | |||||
| 6 Punches | 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" | Steel | Plastic Pouch | 0000000 | 00000 |