High-Accuracy Digital Contact Tachometers with Certificate of Calibration
Accurate to within ±0.006% of reading, these tachometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Contact tachometers come in direct contact with the object measured and are an excellent choice for dirty and dusty environments.
Note: Units are calibrated to work with either a 6" or 12" circumference speed wheel but not both.
Choose tachometer with LCD for use in bright light.
Choose tachometers with LED for use in dimly lit areas.
| Display Type | Includes | Scale | Batteries Included | Each | |
0.1-25,000 rpm Measuring Range (±0.006% Accuracy) | |||||
|---|---|---|---|---|---|
| LCD | 6" Speed Wheel, Measuring Tip for Flat-End Surfaces, 3 1/2" Extension Shaft, Two Measuring Tips for Shafts with Center Hole | cm, ft., ft./hr, ft./min, in., in./min, m, m/hr, m/min, mph, rph, rpm, Total Revolutions, yd., yd./hr, yd./min | Yes | 00000000 | 0000000 |
| LCD | 12" Speed Wheel, Measuring Tip for Flat-End Surfaces, 3 1/2" Extension Shaft, Two Measuring Tips for Shafts with Center Hole | cm, ft., ft./hr, ft./min, in., in./min, m, m/hr, m/min, mph, rph, rpm, Total Revolutions, yd., yd./hr, yd./min | Yes | 00000000 | 000000 |
| LED | 6" Speed Wheel, Measuring Tip for Flat-End Surfaces, 3 1/2" Extension Shaft, Two Measuring Tips for Shafts with Center Hole | cm, ft., ft./hr, ft./min, in., in./min, m, m/hr, m/min, mph, rph, rpm, Total Revolutions, yd., yd./hr, yd./min | Yes | 00000000 | 000000 |
| LED | 12" Speed Wheel, Measuring Tip for Flat-End Surfaces, 3 1/2" Extension Shaft, Two Measuring Tips for Shafts with Center Hole | cm, ft., ft./hr, ft./min, in., in./min, m, m/hr, m/min, mph, rph, rpm, Total Revolutions, yd., yd./hr, yd./min | Yes | 00000000 | 000000 |
| Replacement AA Batteries (Pkg. of 4) | 00000000 | Pkg. | 00000 |
| Optional Carrying Case | 00000000 | Each | 00000 |
| 12" Circumference Grooved Speed Wheel | 00000000 | Each | 000000 |
| 3 1/2" Extension Shaft | 00000000 | Each | 00000 |
| 1/2" Dia. Measuring Tip for Shafts with Center Hole | 00000000 | Each | 0000 |
| 12" Circumference Smooth Speed Wheel | 00000000 | Each | 00000 |
| 3/4" Dia. Measuring Tip for Flat-End Surfaces | 00000000 | Each | 00000 |
| 1 1/4" Dia. Measuring Tip for Shafts with Center Hole | 00000000 | Each | 00000 |
| 3/4" Dia. Measuring Tip for Shafts with Center Hole | 00000000 | Each | 00000 |
| 1/2" Dia. Measuring Tip for Flat-End Surfaces | 00000000 | Each | 00000 |
| 6" Circumference Grooved Speed Wheel | 00000000 | Each | 00000 |
| 6" Circumference Smooth Speed Wheel | 00000000 | Each | 00000 |
High-Accuracy Panel-Mount Tachometers with Certificate of Calibration
Accurate to within ±0.001% of reading, these tachometers come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. Install in a convenient location and measure speed remotely using a sensor (sold separately). Use the buttons on the front panel to program the unit.
Proximity sensor detects moving metal objects, such as gear teeth and fan blades and can be used in dirty and wet environments. Maximum measuring distance is 0.2" from a 1/2" minimum size metal target.
Magnetic sensor has a maximum measuring distance of 0.005" from a 0.1" minimum size ferrous metal target.
Optical sensor performs best in clean environments and works at up to a 45° angle from reflective tape.
For Panel Cutout | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Totalizing Range | Display Type | Scale | Ht. | Wd. | Dp. | Voltage | Frequency | Wire Connection Type | Connection Type | Features | DIN Trade Size | Mounting Hardware Included | Each | |
5-999,990 rpm Measuring Range (±0.001% Accuracy) | ||||||||||||||
Tachometer | ||||||||||||||
| 1-99,999 | LED | Flashes per Minute, rph, rpm, rps, Total Revolutions | 1.8" | 3.6" | 4.5" | 12V DC | __ | Screw Terminals | __ | Maximum Reading Recall, Minimum Reading Recall, Programmable, Totalizing Mode | 1/8 | Yes | 00000000 | 0000000 |
| 1-99,999 | LED | Flashes per Minute, rph, rpm, rps, Total Revolutions | 1.8" | 3.6" | 4.5" | 100-240V AC | 50 Hz/60 Hz | Screw Terminals | __ | Maximum Reading Recall, Minimum Reading Recall, Programmable, Totalizing Mode | 1/8 | Yes | 0000000 | 000000 |
Tachometer with 4 mA-20 mA Current Output | ||||||||||||||
| 1-99,999 | LED | Flashes per Minute, rph, rpm, rps, Total Revolutions | 1.8" | 3.6" | 4.5" | 100-240V AC | 50 Hz/60 Hz | Screw Terminals | 4-pin USB Type A (Male) | Maximum Reading Recall, Minimum Reading Recall, Programmable, Totalizing Mode, Two Internal Alarms | 1/8 | Yes | 00000000 | 000000 |
Tachometer with 0V DC-5V DC Voltage Output | ||||||||||||||
| 1-99,999 | LED | Flashes per Minute, rph, rpm, rps, Total Revolutions | 1.8" | 3.6" | 4.5" | 100-240V AC | 50 Hz/60 Hz | Screw Terminals | 4-pin USB Type A (Male) | Maximum Reading Recall, Minimum Reading Recall, Programmable, Totalizing Mode, Two Internal Alarms | 1/8 | Yes | 00000000 | 000000 |
