Glass-Bonding Epoxies | McMaster-Carr

	For Use On For Use On

	For Joining For Joining

Plastic to Composites

	Color Color

	Clear		White
	Gray		Amber
	Aluminum		Blue
	Black		Green
	Off-White		Silver
	Tan

	Container Type Container Type


Syringe	Cartridge

Single-Use Packet	Tube

Can	Mixer Cup

Bottle	Jar

	Epoxy Type Epoxy Type

Easy Flowing

Fast Hardening

For Vertical Surfaces

General Purpose

High Strength

Machinable Surface Filler

Optically Clear

Water Resistant

	Type Type

	Begins to Harden Begins to Harden

	Maximum Temperature Maximum Temperature

	Reaches Full Strength Reaches Full Strength

	Formulation Formulation

Epoxy

Silver

	Mix Ratio Mix Ratio

	Manufacturer Manufacturer

	Manufacturer Model Number Manufacturer Model Number

	Adhesive Type Adhesive Type

Structural

Electronics

	Container Size Container Size

	Minimum Temperature Minimum Temperature

	Consistency Consistency

Thick Liquid

Paste

	Clarity Clarity

Clear

Semi-Clear

Opaque

	Shear Strength Shear Strength

Less than 2,000 lbs./sq. in.

2,000 to 2,249 lbs./sq. in.

2,250 to 2,499 lbs./sq. in.

2,500 to 2,999 lbs./sq. in.

3,000 lbs./sq. in. or greater

Not Rated

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	Manufacturer Model Name Manufacturer Model Name

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

64 Products

About Paint and Protective Coatings

About Structural Adhesives

Waterproof Epoxy Structural Adhesives

Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	Environment	For Joining		Each
MarineWeld	50172	0.85	Syringe	5 min.	1 hrs.	1,800	Not Rated	1:1	Paste (100,000 cP)	-20° to 300°	White	Salt Spray, Submersible	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	000000	00000

Optically Clear Epoxy Structural Adhesives

For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

DP100 Plus, DP105, and epoxy in 4.5-oz. tubes bond dissimilar materials.

0151 and E-30CL are suitable for fiber-optic applications.

Loctite® Adhesives

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	For Joining		Each
0151	41.6	Can	60 min.	24 hrs.	2,675	Not Rated	2.7:1	Thick Liquid (60,000 cP)	-65 to 160° F	Metal, Plastic, Rubber, Glass	00000000	0000000
E-30CL	1.69	Cartridge	30 min.	24 hrs.	3,100	Not Rated	2:1	Thick Liquid (10,000 cP)	-65 to 250° F	Metal, Plastic, Ceramic, Glass	0000000	00000
E-30CL	6.76	Cartridge	30 min.	24 hrs.	3,100	Not Rated	2:1	Thick Liquid (10,000 cP)	-65 to 250° F	Metal, Plastic, Ceramic, Glass	0000000	00000

Adhesives

Container				Strength
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	For Joining		Each
4.5	Tube	60 min.	36 hrs.	2,450	Not Rated	2:1	Paste (Not Rated)	-65 to 260° F	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Glass	0000000	000000

Adhesives with Ten Mixing Sticks

Container				Strength
Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	For Joining	Pkg. Qty.		Pkg.
Adhesives
0.1	One-Time-Use Packet	60 min.	7 days	2,400	Not Rated	1.61:1	Thick Liquid (14,000 cP)	0° to 180°	Metal, Glass	10	0000000	000000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69 fl. oz. Loctite® Cartridges	00000000	00000
Mixer Nozzle for 6.76 fl. oz. Loctite® Cartridges	0000000	0000
Dispensing Gun for 1.69 fl. oz Loctite® Cartridges	00000000	00000
Dispensing Gun for 6.76 fl. oz. Loctite® Cartridges	0000000	000000
Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	000000000	000000

Epoxy Structural Adhesives

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

DP110, 14310, 14260, and 305-1/2 bond dissimilar materials.

305-1/2 and 310A/B are solvent-free.

3M Scotch-Weld Adhesives

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
1838	57.6	Can	60 min.	7 days	2,000	4	4:5	Paste (492,500 cP)	-65° to 350°	Green	Metal, Plastic, Rubber, Composites, Glass, Wood	00000000	0000000
1838L	64	Can	60 min.	7 days	2,000	4	1:1	Thick Liquid (11,000 cP)	-65° to 350°	Clear	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	000000

Devcon Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
2 Ton Epoxy	14310	0.84	Syringe	8 min.	16 hrs.	2,250	2	1:1	Thick Liquid (8,000 cP)	-40° to 200°	Clear	Metal, Metal to Plastic, Metal to Composites, Plastic, Plastic to Composites, Composites	0000000	000000

Lord Adhesives with Mixer Nozzles

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
305-1/2	1.69	Cartridge	60 min.	48 hrs.	2,240	84	1:1	Thick Liquid (23,250 cP)	-30° to 250°	Blue	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Composites, Glass, Wood, Wood to Glass	00000000	000000
310A/B	1.69	Cartridge	30 min.	24 hrs.	2,520	57	1:1	Paste (535,000 cP)	-40° to 400°	Gray	Metal, Plastic, Rubber, Composites, Glass, Wood	00000000	00000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	00000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	00000

Epoxy Structural Adhesives for Hard-to-Bond Materials

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives. They bond dissimilar materials. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

Container				Strength
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
1.69	Cartridge	90 min.	72 hrs.	Not Rated	Not Rated	1:1	Thick Liquid (6,000 cP)	-85° to 270°	Amber	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass	000000	000000

Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	Each	00000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	Each	00000

Quick-Set Epoxy Structural Adhesives

For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.

The size listed is the combined total of the two parts.

Gorilla Adhesives

Container				Strength
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
0.84	Syringe	5 min.	24 hrs.	3,300	Not Rated	1:1	Thick Liquid (10,000 cP)	-10° to 200°	Clear	Metal, Plastic, Rubber, Glass, Wood	0000000	00000

Adhesives

Container				Strength
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
8	Bottle	3 min.	24 hrs.	3,000	1	1:1	Thick Liquid (40,000 cP)	15° to 180°	Amber	Metal, Plastic, Rubber, Glass, Masonry	0000000	000000
32	Bottle	3 min.	24 hrs.	3,000	1	1:1	Thick Liquid (40,000 cP)	15° to 180°	Amber	Metal, Plastic, Rubber, Glass, Masonry	0000000	000000

Epoxy Structural Adhesive Assortments

Easily handle a variety of small jobs. Assortments include eight different epoxies in 0.1-oz. packets. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

Epoxy Type (For Joining)		Each
Easy Flowing (Composites, Metal) Fast Hardening (Masonry, Metal, Rubber) For Vertical Surfaces (Masonry, Metal, Wood) General Purpose (Masonry, Metal, Plastic, Rubber) High Strength (Metal, Rubber) Machinable Surface Filler (Composites, Metal) Optically Clear (Glass, Metal) Water Resistant (Composites, Masonry, Metal)	0000000	000000

Slow-Set Epoxy Structural Adhesives

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

The size listed is the combined total of the two parts.

2158 bonds to damp concrete.

3M Scotch-Weld Adhesives

	Container				Strength
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Specifications Met	For Joining		Each
2158	64 fl. oz.	Can	2 hrs.	7 days	2,000	3	1:1	Paste (425,000 cP)	-65° to 350°	__	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	0000000
2216	1.66 gal.	Can	90 min.	7 days	1,700	25	2:3	Thick Liquid (81,000 cP)	-65° to 350°	DOD-A-82720	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	00000000
2216	3.3 fl. oz.	Tube	90 min.	7 days	1,700	25	2:3	Thick Liquid (81,000 cP)	-65° to 350°	DOD-A-82720	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	00000
2216	4 fl. oz.	Tube	2 hrs.	30 days	3,000	25	1:1	Thick Liquid (10,000 cP)	-65° to 350°	__	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	00000
2216	26.6 fl. oz.	Can	90 min.	7 days	1,700	25	2:3	Thick Liquid (81,000 cP)	-65° to 350°	DOD-A-82720	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	000000
2216	53.3 fl. oz.	Can	90 min.	7 days	1,700	25	2:3	Thick Liquid (81,000 cP)	-65° to 350°	DOD-A-82720	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	000000
2216	64 fl. oz.	Can	2 hrs.	30 days	3,000	25	1:1	Thick Liquid (10,000 cP)	-65° to 350°	__	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	0000000	000000

Adhesives

Container				Strength
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	For Joining		Each
8	Bottle	2 hrs.	24 hrs.	3,280	Not Rated	1:1	Thick Liquid (30,000 cP)	-25° to 200°	Metal, Plastic, Rubber, Glass, Masonry	0000000	000000
8	Bottle	3 hrs.	24 hrs.	2,800	24	1:1	Thick Liquid (50,000 cP)	-65° to 250°	Metal, Plastic, Rubber, Glass, Masonry	0000000	00000
32	Bottle	2 hrs.	24 hrs.	3,280	Not Rated	1:1	Thick Liquid (30,000 cP)	-25° to 200°	Metal, Plastic, Rubber, Glass, Masonry	0000000	00000
32	Bottle	3 hrs.	24 hrs.	2,800	24	1:1	Thick Liquid (50,000 cP)	-65° to 250°	Metal, Plastic, Rubber, Glass, Masonry	0000000	00000

Low-Odor Epoxy Structural Adhesives

Bond most materials without the strong odor of other epoxy adhesives. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

363A/B is nonflammable and solvent-free.

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Lord Adhesives with Mixer Nozzle
363A/B	1.69	Cartridge	3 min.	6 hrs.	1,400	5	1:1	Thick Liquid (12,750 cP)	-30° to 300°	Amber	Metal, Plastic, Rubber, Composites, Glass, Wood	00000000	000000

Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	Each	000000
Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	Each	0000

Toughened Epoxy Structural Adhesives

Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

DP420NS, DP460NS, E-40HT, and 9462 are nonsagging, so they won't drip from vertical or overhead surfaces.

3M Scotch-Weld Adhesives

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
DP420	6.76	Cartridge	20 min.	24 hrs.	2,690	50	2:1	Thick Liquid (30,000 cP)	-65° to 350°	Black	Metal, Plastic, Composites	00000000	0000000
DP420	13.5	Cartridge	20 min.	24 hrs.	2,500	50	2:1	Thick Liquid (30,000 cP)	-65° to 350°	Off-White	Metal, Plastic, Composites	00000000	000000
DP420	13.5	Cartridge	20 min.	24 hrs.	2,690	50	2:1	Thick Liquid (30,000 cP)	-65° to 350°	Black	Metal, Plastic, Composites	00000000	000000
DP420NS	6.76	Cartridge	20 min.	24 hrs.	2,100	50	2:1	Paste (180,000 cP)	-65° to 350°	Black	Metal, Plastic, Composites	00000000	000000
DP420NS	13.5	Cartridge	20 min.	24 hrs.	2,100	50	2:1	Paste (180,000 cP)	-65° to 350°	Black	Metal, Plastic, Composites	00000000	000000
DP460	13.5	Cartridge	60 min.	24 hrs.	2,500	60	2:1	Thick Liquid (30,000 cP)	-65° to 350°	Off-White	Metal, Plastic, Composites	00000000	000000
DP460NS	6.76	Cartridge	60 min.	24 hrs.	2,680	60	2:1	Paste (125,000 cP)	-65° to 350°	Off-White	Metal, Plastic, Composites	00000000	000000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 6.76 fl. oz. and 13.5 fl. oz. 3M Cartridges	0000000	00000
Dispensing Gun for 6.76 fl. oz. 3M Cartridges	0000000	000000
Dispensing Gun for 13.5 fl. oz. 3M Cartridges	00000000	000000

Conductive Adhesives for Electronics

An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits.

Epoxy adhesives are two-part adhesives that need to be mixed together. The size listed is the combined total of the two parts.

Epoxy Adhesives

One-Time-Use Packet

Container
Net Weight, oz.	Begins to Harden	Reaches Full Strength	Thermal Conductivity, W/m-K	Surface Resistivity, ohms-cm	Mix Ratio	Consistency	Temp. Range, °F	For Joining		Each
One-Time-Use Packet
0.09	3 hrs.	24 hrs.	1.55	0.05	1:1.15	Paste	-75° to 230°	Ceramic, Glass, Metal	0000000	000000

Mixer Nozzles for Two-Part Adhesive Cartridges

Step Tip

Bell-Mount Connection

To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge. Mixing elements help combine the two parts of an adhesive as it flows through the nozzle. A short nozzle with many mixing elements combines adhesive while minimizing the adhesive left in the nozzle after dispensing. Choose a nozzle that matches the connection type, size, and mix ratio of your adhesive cartridge.

A step tip allows you to trim the opening to the diameter you need.

Bell-Mount Connection

							Each
For Cartridge Size, oz.	Mix Ratio	Opening ID	Lg.	Mixing Elements	Mfr.	Material		Each
5-Step Tip
6.76, 13.52	1:1, 2:1	0.66"	5"	20	3M	Polypropylene Plastic	00000000	00000

Surface Fillers

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Size	Net Weight	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On	Pkg. Qty.		Pkg.
Loctite® Fixmaster Epoxy
EA 445	__	0.12 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 445	__	1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 9131	__	0.12 oz.	Mixer Cup	90	24 hrs.	Thick Liquid	1.5:1	1 sq. in. @ 1/4"	-65° to 180°	White	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	00000
															Each
Loctite® Fixmaster Poxy Pak™
EA 9017	0.8 fl. oz.	__	Syringe	5	60 min.	Thick Liquid	1:1	Not Rated	-65° to 300°	Clear	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Concrete, Glass, Wood	__	0000000	00000

Conductive Surface Fillers for Electronics

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

Surface fillers in one-time-use packets and jars come as two parts. The size listed is the combined total of the two parts.

Volume resistivity and surface resistivity measure how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.

Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.

Container							Temp. Range, °F
Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Thermal Conductivity, W/m-K	Volume Resistivity, ohms-cm	Mix Ratio	Min.	Max.	For Use On		Each
Surface Fillers
0.09	One-Time-Use Packet	90 min.	24 hrs.	6.05	0.009	100:6	-75°	250°	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass	0000000	000000
0.35	One-Time-Use Packet	90 min.	24 hrs.	6.05	0.009	100:6	-75°	250°	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass	0000000	000000

Chemical-Resistant Surface Fillers for Metal

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

Container
Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approximate Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Surface Fillers
11	Tube	25	7 days	Paste	1:1	50 sq. in. @ 1/4"	1/4"	Yes	-55° to 180°	Silver	Machine, Drill, Sand, Tap	Aluminum, Brass, Bronze, Steel, Cast Iron, Titanium	0000000	000000

Epoxy Potting Compounds

Encase electronic assemblies in a layer of epoxy for protection from dust, chemicals, moisture, mechanical shock, and vibration. The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.

			Dry Time
Mfr. Model No.	Container Size, fl. oz.	Consistency	Touch	Overall	Dielectric Strength, V/mil	Thermal Conductivity, W/m-K	Temp. Range, °F	Specifications Met	For Use On	Choose a Color		Each
3M Compounds—Extra Hard
DP270	1.64	Thick Liquid	3 hrs.	48 hrs.	850	0.18	-65° to 210°	UL 94 HB	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass	Black, Clear	00000000	000000
DP270	6.8	Thick Liquid	3 hrs.	48 hrs.	850	0.18	-65° to 210°	UL 94 HB	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass	Black, Clear	00000000	00000
DP270	13.5	Thick Liquid	3 hrs.	48 hrs.	850	0.18	-65° to 210°	UL 94 HB	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass	Black	00000000	000000
Loctite® Compounds—Extra Hard
3336	1.4	Thick Liquid	15 min.	24 hrs.	Not Rated	Not Rated	-65° to 350°	__	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass	Amber	0000000	00000

Dispensing Gun for 6.8 fl. oz. 3M Cartridges	0000000	Each	0000000
Mixer Nozzle for 6.8 fl. oz. 3M Cartridges	0000000	Each	0000
Mixer Nozzle for 1.64 fl. oz. and 1.69 fl. oz. 3M Cartridges (Mixing Elements: 16)	0000000	Each	0000
Dispensing Gun for 1.64 fl. oz. and 1.69 fl. oz. 3M Cartridges	0000000	Each	000000
Mixer Nozzle for 13.5 fl. oz. 3M Cartridges	00000000	Each	0000
Dispensing Gun for 13.5 fl. oz. 3M Cartridges	00000000	Each	000000
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges	0000000	Each	0000
Plunger for 1.4 fl. oz. Loctite Cartridges	00000000	Each	0000
Dispensing Gun for 1.4 fl. oz. Loctite Cartridges	0000000	Each	00000

Adjustable-Flexibility Heat-Transfer Potting Compounds

Mixing required—resin and hardener come in two separate jars or in a jar and syringe and must be combined before applying. Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application. They're formulated to draw heat away from sensitive electronic components, so they have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

The size listed is the combined total of the two parts.

		Dry Time
Container Size, fl. oz.	Consistency	Touch, min.	Overall, hrs.	Hardness Rating	Dielectric Strength, V/mil	Thermal Conductivity, W/m-K	Temp. Range, °F	Heating Requirements to Reach Full Strength	For Use On	Color		Each
Jar Compounds
12	Thick Liquid	30	24	Extra Hard, Medium Hard, Medium Soft, Soft	450	1	-100° to 450°	__	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass	Tan	000000	000000
24	Thick Liquid	30	24	Extra Hard, Medium Hard, Medium Soft, Soft	450	1	-100° to 450°	__	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass	Tan	000000	000000
Jar and Syringe Compounds
1.6	Thick Liquid	30	26	Extra Hard, Medium Hard, Medium Soft, Soft	450	1.01	-100° to 450°	2 hrs. @ 250° F	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass	Tan	000000	00000