Glass Hollow Rods | McMaster-Carr

Clear All

	System of Measurement System of Measurement

Inch

Metric

	ID ID

	OD OD

	Wall Thickness Wall Thickness

	Shape Shape	Show

Round Tube

	Shape Shape	Hide

	Length Length

	Color Color

	Clear

	Material Material

Glass

Plastic

	Clarity Clarity

	Clear

	Maximum Temperature Maximum Temperature

Less than 250° F

250° to 499° F

2,000° F or greater

	Minimum Temperature Minimum Temperature

-249° to -25° F

-24° to 0° F

Not Rated

	Maximum Pressure Maximum Pressure

	Fabrication Fabrication

Annealed

Cast

Extruded

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	Density Density

0.043 lbs./cu. in.

0.08 lbs./cu. in.

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Hardness Hardness

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Edge Fabrication Edge Fabrication

Ground

	Thermal Conductivity Thermal Conductivity

1.4 W/m-°C @ 20° C

1.2 Btu/hr. × in./sq. ft./°F @
212° F

8.3 Btu/hr. × in./sq. ft./°F @
212° F

	Refractive Index Refractive Index

1.46

1.47

	Modulus of Elasticity Modulus of Elasticity

63 KN/mm²

72 KN/mm²

	Specifications Met Specifications Met

ASTM

FDA Compliant

Mil. Spec.

View catalog pages (4)

Forward

How can we improve?

197 Products

About Plastic

Color: Clear
Max. Temperature: See table
Fabrication: Annealed

These short glass tubes can be used as glass bowls in oil dispensers. Borosilicate glass resists clouding and pitting and is highly chemical resistant. With a low rate of thermal expansion, it stays dimensionally stable during changes in temperature.

For technical drawings and 3-D models, click on a part number.

OD	ID	Wall Thick.	Lg.	Max. Pressure, psi	Max. Temperature, °F	Edge Fabrication		Each
1"	3/4"	1/8"	7/8"	190	212°	Ground	00000000	00000
1 1/4"	1"	1/8"	1 1/8"	150	212°	Ground	0000000	00000
1 1/2"	1 1/4"	1/8"	1 3/8"	130	212°	Ground	0000000	00000
1 3/4"	1 15/32"	1/8"	1 5/8"	130	212°	Ground	0000000	00000
2"	1 11/16"	9/64"	1 7/8"	110	185°	Ground	0000000	00000
2 1/4"	1 29/32"	3/16"	2 1/8"	105	185°	Ground	0000000	00000
2 1/2"	2 1/8"	3/16"	2 3/8"	100	185°	Ground	0000000	00000
3"	2 19/32"	3/16"	3"	85	150°	Ground	0000000	00000
3 1/2"	3 1/16"	7/32"	4"	60	150°	Ground	0000000	00000
4 1/4"	3 3/4"	1/4"	5"	50	125°	Ground	0000000	00000
5 1/2"	5"	1/4"	7"	35	100°	Ground	00000000	000000

Borosilicate Glass Tubes

Color: Clear
Max. Temperature: 445° F
Fabrication: Annealed

Also called Pyrex and Schott glass, this glass resists clouding and pitting and is highly chemical and heat resistant. With a low rate of thermal expansion, it stays dimensionally stable during changes in temperature.

For technical drawings and 3-D models, click on a part number.

					12" Lg.
OD	ID	Wall Thick.	Edge Fabrication	Specifications Met		Each
Inch
0.25"	0.160"	0.047"	Ground	MIL-G-47033	0000000	00000
0.375"	0.220"	0.079"	Ground	MIL-G-47033	0000000	0000
0.5"	0.310"	0.094"	Ground	MIL-G-47033	0000000	0000
0.5"	0.380"	0.063"	Ground	MIL-G-47033	0000000	0000
0.625"	0.440"	0.094"	Ground	MIL-G-47033	0000000	00000
0.625"	0.500"	0.063"	Ground	MIL-G-47033	0000000	0000
0.75"	0.500"	0.126"	Ground	MIL-G-47033	0000000	00000
0.75"	0.620"	0.063"	Ground	MIL-G-47033	0000000	00000
0.875"	0.620"	0.126"	Ground	MIL-G-47033	0000000	00000
1"	0.690"	0.157"	Ground	MIL-G-47033	0000000	00000
1"	0.810"	0.094"	Ground	MIL-G-47033	0000000	00000
Metric
5mm	0.600mm	2.2mm	Ground	MIL-G-47033	0000000	0000
6mm	1.200mm	2.4mm	Ground	MIL-G-47033	0000000	0000
6mm	2.700mm	1.65mm	Ground	MIL-G-47033	0000000	0000
7mm	3.000mm	2mm	Ground	MIL-G-47033	0000000	0000
8mm	3.000mm	2.5mm	Ground	MIL-G-47033	0000000	0000
9mm	3.000mm	3mm	Ground	MIL-G-47033	0000000	0000

Ultra-High-Temperature Quartz Glass Tubes

Color: Clear
Max. Temperature: 2000° F
Fabrication: Annealed

Blistering temperatures won’t melt these quartz tubes, and rapid temperature shifts won’t cause them to crack. Even tougher than borosilicate, they can be used in furnaces and ovens heated up to 2000° F. These highly pure tubes are often used in laboratories because they won’t leach impurities into samples or contaminate chemical reactions. Quartz tubes are optically clear and have excellent UV transmission, making them ideal for UV purification systems.

For technical drawings and 3-D models, click on a part number.

				12" Lg.		48" Lg.
OD	ID	Wall Thick.	Edge Fabrication		Each		Each
Inch
0.25"	0.157"	0.043"	Ground	0000000	00000	00000000	000000
0.375"	0.276"	0.05"	Ground	0000000	0000	00000000	00000
0.5"	0.413"	0.044"	Ground	0000000	0000	00000000	00000
0.625"	0.551"	0.039"	Ground	0000000	0000	00000000	00000
0.75"	0.630"	0.059"	Ground	0000000	00000	00000000	00000
0.875"	0.748"	0.059"	Ground	0000000	00000	00000000	00000
1"	0.866"	0.074"	Ground	0000000	00000	00000000	00000
Metric
3mm	1.000mm	1mm	Ground	00000000	0000	00000000	0000
4mm	2.000mm	1mm	Ground	00000000	0000	00000000	0000
5mm	3.000mm	1mm	Ground	00000000	0000	00000000	0000
6mm	4.000mm	1mm	Ground	00000000	0000	00000000	0000
7mm	5.000mm	1mm	Ground	00000000	0000	00000000	00000
8mm	6.000mm	1mm	Ground	00000000	0000	00000000	00000
9mm	7.000mm	1mm	Ground	0000000	0000	00000000	00000
10mm	8.000mm	1mm	Ground	0000000	0000	00000000	00000
11mm	9.000mm	1mm	Ground	0000000	0000	00000000	00000
12mm	10.000mm	1mm	Ground	0000000	0000	00000000	00000
13mm	11.000mm	1mm	Ground	0000000	0000	00000000	00000
14mm	12.000mm	1mm	Ground	0000000	0000	00000000	00000
15mm	13.000mm	1mm	Ground	0000000	0000	00000000	00000
16mm	14.000mm	1mm	Ground	0000000	0000	00000000	00000
17mm	15.000mm	1mm	Ground	0000000	0000	00000000	00000
18mm	16.000mm	1mm	Ground	0000000	0000	00000000	00000
19mm	16.000mm	1.5mm	Ground	0000000	00000	00000000	00000
20mm	17.000mm	1.5mm	Ground	0000000	00000	00000000	00000
21.6mm	18.000mm	1.8mm	Ground	0000000	00000	00000000	00000
22mm	19.000mm	1.5mm	Ground	0000000	00000	00000000	00000
23mm	20.000mm	1.5mm	Ground	0000000	00000	00000000	00000
24mm	20.000mm	2mm	Ground	0000000	00000	00000000	00000
25mm	22.000mm	1.5mm	Ground	0000000	00000	00000000	00000

Clear Scratch- and UV-Resistant Cast Acrylic Tubes

Color: Clear
Temperature Range: 0° to 150° F
Tensile Strength: 10,000-11,250 psi (Good)
Impact Strength: 0.3-0.4 ft.-lbs./in. (Poor)
Hardness: Rockwell M94-M100 (Hard)
For Use Outdoors: Yes
Specifications Met: See table

Fabricate containers, tanks, and lenses for light fixtures with these scratch- and UV-resistant cast acrylic tubes. Cast acrylic, which is comparable to Lucite and Plexiglas® Acrylic, is easier to machine than extruded acrylic. This material stands up to outdoor use better than polycarbonate and maintains clarity over time.

For technical drawings and 3-D models, click on a part number.

1/8" Wall Thick.
OD	OD Tolerance	ID	Lengths, ft.	Specifications Met		Per Ft.
1 1/2"	-0.020" to 0.020"	1 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	000000
1 3/4"	-0.020" to 0.020"	1 1/2"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
2"	-0.020" to 0.020"	1 3/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
2 1/4"	-0.020" to 0.020"	2"	1, 3, 5	ASTM D5436, UL 746C, UL 94 HB	00000000	00000
2 1/2"	-0.020" to 0.020"	2 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
2 3/4"	-0.020" to 0.020"	2 1/2"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
3"	-0.020" to 0.020"	2 3/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
3 1/4"	-0.030" to 0.030"	3"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
3 1/2"	-0.030" to 0.030"	3 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
3 3/4"	-0.030" to 0.030"	3 1/2"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	0000000	00000
4"	-0.045" to 0.045"	3 3/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
4 1/4"	-0.045" to 0.045"	4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
4 1/2"	-0.045" to 0.045"	4 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
4 3/4"	-0.045" to 0.045"	4 1/2"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
5"	-0.045" to 0.045"	4 3/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
5 1/4"	-0.045" to 0.045"	5"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
5 1/2"	-0.045" to 0.045"	5 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
5 3/4"	-0.045" to 0.045"	5 1/2"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
6"	-0.045" to 0.045"	5 3/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
7"	-0.065" to 0.065"	6 3/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
8"	-0.065" to 0.065"	7 3/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
10"	-0.065" to 0.065"	9 3/4"	2, 4	UL 94 HB	000000000	000000
10 1/2"	-0.065" to 0.065"	10 1/4"	2, 4	UL 94 HB	000000000	000000
12"	-0.065" to 0.065"	11 3/4"	2, 4	UL 94 HB	000000000	000000
3/16" Wall Thick.
1 1/2"	-0.020" to 0.020"	1 1/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
1 3/4"	-0.020" to 0.020"	1 3/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
2"	-0.020" to 0.020"	1 5/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
2 1/4"	-0.020" to 0.020"	1 7/8"	1, 3, 5	ASTM D5436, UL 746C, UL 94 HB	00000000	00000
2 1/2"	-0.020" to 0.020"	2 1/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
2 3/4"	-0.020" to 0.020"	2 3/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
3"	-0.020" to 0.020"	2 5/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
3 1/4"	-0.030" to 0.030"	2 7/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
3 1/2"	-0.030" to 0.030"	3 1/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
3 3/4"	-0.030" to 0.030"	3 3/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
4"	-0.045" to 0.045"	3 5/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
4 1/4"	-0.045" to 0.045"	3 7/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
4 1/2"	-0.045" to 0.045"	4 1/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
4 3/4"	-0.045" to 0.045"	4 3/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
5"	-0.045" to 0.045"	4 5/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
5 1/4"	-0.045" to 0.045"	4 7/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
5 3/4"	-0.045" to 0.045"	5 3/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
6"	-0.045" to 0.045"	5 5/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
7"	-0.065" to 0.065"	6 5/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
8"	-0.065" to 0.065"	7 5/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
1/4" Wall Thick.
1 1/2"	-0.020" to 0.020"	1"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
1 3/4"	-0.020" to 0.020"	1 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
2"	-0.020" to 0.020"	1 1/2"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
2 1/4"	-0.020" to 0.020"	1 3/4"	1, 3, 5	ASTM D5436, UL 746C, UL 94 HB	00000000	00000
2 1/2"	-0.020" to 0.020"	2"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
2 3/4"	-0.020" to 0.020"	2 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
3"	-0.020" to 0.020"	2 1/2"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
3 1/4"	-0.030" to 0.030"	2 3/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
3 1/2"	-0.030" to 0.030"	3"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
3 3/4"	-0.030" to 0.030"	3 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
4"	-0.045" to 0.045"	3 1/2"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
4 1/4"	-0.045" to 0.045"	3 3/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
4 1/2"	-0.045" to 0.045"	4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
4 3/4"	-0.045" to 0.045"	4 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
5"	-0.045" to 0.045"	4 1/2"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
5 1/4"	-0.045" to 0.045"	4 3/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
5 1/2"	-0.045" to 0.045"	5"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
5 3/4"	-0.045" to 0.045"	5 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
6"	-0.045" to 0.045"	5 1/2"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	00000
7"	-0.065" to 0.065"	6 1/2"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	000000
8"	-0.065" to 0.065"	7 1/2"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	000000
10"	-0.065" to 0.065"	9 1/2"	2, 4	UL 94 HB	000000000	000000
12"	-0.065" to 0.065"	11 1/2"	2, 4	UL 94 HB	000000000	000000
3/8" Wall Thick.
4"	-0.045" to 0.045"	3 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	000000
4 1/2"	-0.045" to 0.045"	3 3/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	000000
4 3/4"	-0.045" to 0.045"	4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	000000
5"	-0.045" to 0.045"	4 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	000000
5 1/4"	-0.045" to 0.045"	4 1/2"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	000000
5 1/2"	-0.045" to 0.045"	4 3/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	000000
6"	-0.045" to 0.045"	5 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	000000
7"	-0.065" to 0.065"	6 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	000000
8"	-0.065" to 0.065"	7 1/4"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	000000
1/2" Wall Thick.
10"	-0.065" to 0.065"	9"	2, 4	UL 94 HB	000000000	000000
14"	-0.080" to 0.080"	13"	2, 4	__	000000000	000000

Clear Scratch- and UV-Resistant Acrylic Tubes

Color: Clear
Temperature Range: -40° to 180° F
Tensile Strength; 9,195-11,030 (Good)
Impact Strength: 0.040 ft.-lbs./in.
Hardness: Rockwell M89-M96 (Hard)
For Use Outdoors: Yes
Specifications Met: UL 94 HB

When compared to cast acrylic tubes, these extruded acrylic tubes offer nearly the same performance at a fraction of the cost. Use them for sight gauges and protective covers. This scratch- and UV-resistant material stands up to outdoor use better than polycarbonate and maintains clarity over time.

For technical drawings and 3-D models, click on a part number.

Round Tubes

1/16" Wall Thick.
OD	OD Tolerance	ID	ID Tolerance	Lg., ft.		Each
1/4"	-0.010" to 0.010"	1/8"	-0.010" to 0.010"	6	0000000	00000
5/16"	-0.010" to 0.010"	3/16"	-0.010" to 0.010"	6	0000000	0000
3/8"	-0.010" to 0.010"	1/4"	-0.010" to 0.010"	6	0000000	0000
1/2"	-0.010" to 0.010"	3/8"	-0.010" to 0.010"	6	0000000	0000
5/8"	-0.010" to 0.010"	1/2"	-0.010" to 0.010"	6	0000000	0000
3/4"	-0.010" to 0.010"	5/8"	-0.010" to 0.010"	6	0000000	0000
7/8"	-0.010" to 0.010"	3/4"	-0.010" to 0.010"	6	0000000	00000
1"	-0.010" to 0.010"	7/8"	-0.010" to 0.010"	6	0000000	0000
1 1/4"	-0.015" to 0.015"	1 1/8"	-0.015" to 0.015"	6	0000000	00000
1/8" Wall Thick.
1/2"	-0.010" to 0.010"	1/4"	-0.010" to 0.010"	6	0000000	0000
5/8"	-0.010" to 0.010"	3/8"	-0.010" to 0.010"	6	0000000	0000
3/4"	-0.010" to 0.010"	1/2"	-0.010" to 0.010"	6	0000000	00000
7/8"	-0.010" to 0.010"	5/8"	-0.010" to 0.010"	6	0000000	00000
1"	-0.010" to 0.010"	3/4"	-0.010" to 0.010"	6	0000000	00000
1 1/4"	-0.015" to 0.015"	1"	-0.015" to 0.015"	6	0000000	00000
1 3/8"	-0.015" to 0.015"	1 1/8"	-0.015" to 0.015"	6	0000000	00000
1 1/2"	-0.015" to 0.015"	1 1/4"	-0.015" to 0.015"	6	0000000	00000
1 5/8"	-0.015" to 0.015"	1 3/8"	-0.015" to 0.015"	6	0000000	00000
1 3/4"	-0.015" to 0.015"	1 1/2"	-0.015" to 0.015"	6	0000000	00000
2"	-0.015" to 0.015"	1 3/4"	-0.015" to 0.015"	6	0000000	00000
2 1/4"	-0.015" to 0.015"	2"	-0.015" to 0.015"	6	0000000	00000
2 1/2"	-0.020" to 0.020"	2 1/4"	-0.020" to 0.020"	6	0000000	00000
2 3/4"	-0.020" to 0.020"	2 1/2"	-0.020" to 0.020"	6	0000000	00000
3"	-0.020" to 0.020"	2 3/4"	-0.020" to 0.020"	6	0000000	00000
3 1/4"	-0.025" to 0.025"	3"	-0.025" to 0.025"	6	0000000	00000
3 1/2"	-0.025" to 0.025"	3 1/4"	-0.025" to 0.025"	6	0000000	00000
3 3/4"	-0.025" to 0.025"	3 1/2"	-0.025" to 0.025"	6	000000	00000
4"	-0.030" to 0.030"	3 3/4"	-0.030" to 0.030"	6	0000000	00000
4 1/2"	-0.030" to 0.030"	4 1/4"	-0.030" to 0.030"	6	0000000	000000
5"	-0.040" to 0.040"	4 3/4"	-0.040" to 0.040"	6	0000000	000000
6"	-0.050" to 0.050"	5 3/4"	-0.050" to 0.050"	6	0000000	000000

Email Us

About Plastic

Pressure-Rated Borosilicate Glass Tubes

Borosilicate Glass Tubes

Ultra-High-Temperature Quartz Glass Tubes

Clear Scratch- and UV-Resistant Cast Acrylic Tubes

Clear Scratch- and UV-Resistant Acrylic Tubes