Tougher than standard cold-protection mitts, these mitts protect your hands from cuts and impacts as well as wintry weather. They’re packed with insulation to keep you warm while you work. To keep you dry, the leather exterior is treated for water resistance. A separated index finger makes it easier to grab and hold objects.

These mitts are rated to ANSI/ISEA 105 standards for resistance to cuts, abrasions, and punctures. The higher the rating, the greater the protection. They also meet ANSI 138 standards for impact resistance. Their EN 388 rating means they adhere to European standards for puncture resistance.

Due to import restrictions, these mitts cannot be sold to Canada.

Protect your hands from wintry weather, frozen objects, and sharp edges. Easier to slip on or off than gloves, these mitts are a good choice for tasks that don’t require dexterity. All meet ANSI/ISEA 105 standards for cut, abrasion, and puncture resistance. Their ANSI cut rating reflects the amount of force required to cut through them with a razor blade.

Mitts with an A4 cut rating meet the common minimum cut rating for industrial applications. They’re good for jobs involving sharp-edged materials such as sheet metal and glass. An insulated inner layer provides extra warmth. They also have a separated index finger to easily grip and hold objects.

Mitts with an A6 cut rating are safe to use with cutting blades, knives, and sharp wire.

Easy to pull on or off, these mitts are made for welding tasks that don’t require high dexterity. An aluminum backing shields your hands from radiant heat and sparks. The palm is leather for a balance of durability and comfort. These mitts have a separated index finger so you can squeeze the trigger of your welding gun.

Use these mitts for welding jobs that don’t require high dexterity. Since they have fewer separated fingers than gloves, they block more heat, and they’re easier to slip on or off. They also reduce the risk of pinky shrink, which happens when heat causes a glove’s pinky area to shrivel. All have a separated index finger so you can squeeze the trigger of your welding gun.

Goatskin mitts are soft, so you can feel finer details than other mitts. Pigskin mitts don’t stiffen when they’re wet. Cowhide mitts balance durability and comfort.

Mitts with a reinforced thumb, palm, or fingers have an extra layer of material to add durability in high-wear areas.

Mitts with a separated middle finger give you more dexterity than mitts with only the index finger separated.

Mitts that meet ANSI/ISEA 105 standards are rated for various forms of protection, such as resistance to abrasions and heat. The higher the rating, the greater the protection.

Mitts that cannot be sold to Canada are restricted by import regulations.

Handle everything from frozen samples to freshly soldered circuit boards without contaminating your clean room. These mitts protect your hands between -75° and 390° F. They don’t shed fibers, so your clean room stays clean. Compared to gloves, they’re easier to slip on and off—and they can even be worn over gloves—but aren’t a good choice when you need high dexterity. These mitts meet EN 374 standards for protection against chemicals. They’ll also shield your hands from solder and fluxes in welding areas.