The polyurethane glue in these cartridges has nearly twice the shear strength of other hot-melt adhesives.

Use these glues for general purpose bonding and repairs.

Melt and dispense hot-melt glue sticks for sealing and assembling.

These small guns get into areas larger guns can't.

Don't be tethered by a cord—take these guns where they're needed.

Continuous duty guns use electric or battery power to dispense glue. Use a battery adapter (sold separately) with your DeWalt, Makita, or Milwaukee batteries. Intermittent duty guns dispense glue for up to 3 minutes per charge.

Dispense up to 3 times as much adhesive per hour as our standard hot-melt glue guns.

Use these guns in heat-sensitive applications and on delicate materials. They have a temperature setting of 250° F.

A motor advances the glue stick for a continuous flow of glue. After releasing the trigger, the gun automatically reverses to prevent drips.

For stronger bonds than other hot-melt adhesives, use these guns with polyurethane hot-melt cartridges.

Butane power makes these guns completely portable.

Dispense 3M hot-melt adhesives with these guns. Guns include one tip.

With five temperature range options, these guns can dispense 3M adhesives with different melting points. Install the temperature module that matches the application temperature of your 3M glue stick. Gun has a stroke adjuster that controls the amount of adhesive dispensed per trigger squeeze. One tip is included; additional tips are sold separately.

Use L-tips to close full-overlap cartons.

T-tips dispense two lines of glue to close slotted cartons.

Tips are not compatible with model AE II or AE II LT glue guns.

For use in high-volume production applications, these guns use electric heat to melt the adhesive and compressed air to keep it flowing. Load up to three glue sticks at once. The gun includes one tip; additional tips are sold separately. Use only with 3M glue sticks.

Swap out worn or broken parts for your 3M hot-melt glue gun.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.

NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.

Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi. These sticks meet NSF/ANSI 61 safety standards for use with drinking water systems.

Stop leaks in metal tanks and equipment without draining the contents. Until a permanent repair can be made, rub these sticks into the leak to form a temporary seal.

Press these putty-like fillers into cracks in wood up to 1/8" wide. At full strength, they can be sanded, painted, and varnished.

Epoxy fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.

Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.

Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. Use with most rigid and semi-rigid types of plastic. They meet NSF/ANSI 61 for use with drinking water.