Filter by
Fastener Strength Grade/Class
Thread Size
Material
Height
Width
Flange Diameter
Flange Thickness
Locking Type
Hex Nut Profile
Thread Spacing
Thread Direction
Specifications Met
Export Control Classification Number (ECCN)
DFARS Specialty Metals
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Flange Nuts
Medium-Strength Steel
 |
Rated Grade 5, Grade F, or Class 8, these nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
Steel—Best for dry environments since moisture will cause these nuts to rust.
Flange, mm | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Wd., mm | Ht., mm | Dia. | Thk. | Fastener Strength Grade/Class | Specs. Met | Certificate Type | Pkg. Qty. | Pkg. | |||
Zinc-Plated Steel | ||||||||||||
| M3 × 0.5 mm | 5.5 | 4 | 8 | 0.8 | Class 8 | DIN 6923 | Material Certificate | 50 | 90374A211 | 00000 | ||
| M4 × 0.7 mm | 7 | 4.65 | 10 | 1.65 | Class 8 | DIN 6923, ISO 4161 | — | 100 | 90374A110 | 0000 | ||
| M5 × 0.8 mm | 8 | 5 | 11.8 | 2.8 | Class 8 | DIN 6923, ISO 4161 | — | 100 | 90374A111 | 0000 | ||
| M6 × 1 mm | 10 | 6 | 14.2 | 2.9 | Class 8 | DIN 6923, ISO 4161 | — | 100 | 90374A112 | 0000 | ||
| M8 × 1 mm | 13 | 8 | 17.9 | 3.5 | Class 8 | DIN 6923, ISO 4161 | — | 50 | 90374A113 | 0000 | ||
| M8 × 1.25 mm | 13 | 8 | 17.9 | 3.5 | Class 8 | DIN 6923, ISO 4161 | — | 100 | 90374A114 | 00000 | ||
| M10 × 1.25 mm | 15 | 10 | 21.8 | 4.5 | Class 8 | DIN 6923, ISO 4161 | — | 50 | 90374A115 | 00000 | ||
| M10 × 1.5 mm | 15 | 10 | 21.8 | 4.5 | Class 8 | DIN 6923, ISO 4161 | — | 50 | 90374A116 | 0000 | ||
| M12 × 1.25 mm | 18 | 12 | 26 | 5.3 | Class 8 | DIN 6923, ISO 4161 | — | 25 | 90374A117 | 0000 | ||
| M12 × 1.5 mm | 18 | 12 | 26 | 5.3 | Class 8 | DIN 6923, ISO 4161 | — | 10 | 90374A118 | 0000 | ||
| M12 × 1.75 mm | 18 | 12 | 26 | 5.3 | Class 8 | DIN 6923, ISO 4161 | — | 25 | 90374A119 | 00000 | ||
| M14 × 2 mm | 21 | 14 | 29.9 | 6.2 | Class 8 | DIN 6923, ISO 4161 | — | 10 | 90374A120 | 0000 | ||
| M16 × 1.5 mm | 24 | 16 | 34.5 | 7 | Class 8 | DIN 6923, ISO 4161 | — | 1 | 90374A121 | 0000 | ||
| M16 × 2 mm | 24 | 16 | 34.5 | 7 | Class 8 | DIN 6923, ISO 4161 | — | 10 | 90374A122 | 00000 | ||
| M20 × 2.5 mm | 30 | 20 | 42.8 | 9 | Class 8 | DIN 6923, ISO 4161 | — | 5 | 90374A123 | 00000 | ||
Steel | ||||||||||||
| M6 × 1 mm | 10 | 6 | 14.2 | 1.1 | Class 8 | DIN 6923 | — | 100 | 90374A212 | 0000 | ||
| M8 × 1.25 mm | 13 | 8 | 17.9 | 1.2 | Class 8 | DIN 6923 | — | 50 | 90374A213 | 0000 | ||
| M10 × 1.25 mm | 15 | 10 | 21.8 | 1.5 | Class 8 | DIN 6923 | — | 25 | 90374A215 | 0000 | ||
| M10 × 1.5 mm | 15 | 10 | 21.8 | 1.5 | Class 8 | DIN 6923 | Material Certificate | 25 | 90374A216 | 0000 | ||
| M12 × 1.25 mm | 18 | 12 | 26 | 1.8 | Class 8 | DIN 6923 | — | 10 | 90374A218 | 0000 | ||
| M12 × 1.5 mm | 18 | 12 | 26 | 1.8 | Class 8 | DIN 6923 | — | 10 | 90374A219 | 0000 | ||
| M12 × 1.75 mm | 18 | 12 | 26 | 1.8 | Class 8 | DIN 6923 | — | 25 | 90374A217 | 00000 | ||
| M16 × 1.5 mm | 24 | 16 | 34.5 | 2.4 | Class 8 | DIN 6923 | — | 5 | 90374A221 | 0000 | ||
| M16 × 2 mm | 24 | 16 | 34.5 | 2.4 | Class 8 | DIN 6923 | — | 10 | 90374A214 | 0000 | ||
High-Strength Steel
|
Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Wd. | Ht. | Dia. | Thk. | Fastener Strength Grade/Class | Certificate Type | Pkg. Qty. | Pkg. | |||
Zinc-Plated Steel | |||||||||||
| 1/4"-20 | 7/16" | 15/64" | 19/32" | 0.06" | SAE Grade 8 | — | 100 | 94612A101 | 000000 | ||
| 5/16"-18 | 1/2" | 9/32" | 11/16" | 0.07" | SAE Grade 8 | — | 100 | 94612A102 | 00000 | ||
| 3/8"-16 | 9/16" | 11/32" | 3/4" | 0.08" | SAE Grade 8 | Material Certificate | 50 | 94612A103 | 00000 | ||
| 1/2"-13 | 3/4" | 29/64" | 1 1/32" | 0.1" | SAE Grade 8 | Material Certificate | 25 | 94612A104 | 00000 | ||
| 5/8"-11 | 15/16" | 9/16" | 1 9/32" | 0.12" | SAE Grade 8 | Material Certificate | 10 | 94612A105 | 00000 | ||
| 3/4"-10 | 1 1/8" | 21/32" | 1 1/2" | 0.16" | SAE Grade 8 | Material Certificate | 10 | 94612A106 | 00000 | ||
| 3/4"-16 | 1 1/8" | 21/32" | 1 1/2" | 0.16" | SAE Grade 8 | — | 5 | 94612A107 | 00000 | ||
Zinc-Yellow-Chromate-Plated Steel | |||||||||||
| 1/4"-20 | 7/16" | 15/64" | 19/32" | 0.06" | SAE Grade 8 | Material Certificate | 10 | 91627A115 | 0000 | ||
| 5/16"-18 | 1/2" | 9/32" | 11/16" | 0.07" | SAE Grade 8 | — | 10 | 91627A116 | 0000 | ||
| 3/8"-16 | 9/16" | 11/32" | 3/4" | 0.08" | SAE Grade 8 | Material Certificate | 10 | 91627A117 | 0000 | ||
| 1/2"-13 | 3/4" | 29/64" | 1 1/32" | 0.1" | SAE Grade 8 | Material Certificate | 10 | 91627A118 | 0000 | ||
| 5/8"-11 | 15/16" | 9/16" | 1 9/32" | 0.12" | SAE Grade 8 | Material Certificate | 5 | 91627A111 | 00000 | ||
| 5/8"-18 | 15/16" | 9/16" | 1 9/32" | 0.12" | SAE Grade 8 | Material Certificate | 5 | 91627A112 | 00000 | ||
| 3/4"-10 | 1 1/8" | 21/32" | 1 1/2" | 0.16" | SAE Grade 8 | — | 1 | 91627A113 | 0000 | ||
| 3/4"-16 | 1 1/8" | 21/32" | 1 1/2" | 0.16" | SAE Grade 8 | Material Certificate | 1 | 91627A114 | 0000 | ||
| 1"-8 | 1 1/2" | 57/64" | 2 1/16" | 0.21" | SAE Grade 8 | Material Certificate | 1 | 91627A119 | 0000 | ||
Black Phosphate-Coated Steel | |||||||||||
| 1/4"-20 | 7/16" | 15/64" | 19/32" | 0.06" | SAE Grade 8 | — | 100 | 94902A101 | 00000 | ||
| 1/4"-28 | 7/16" | 15/64" | 19/32" | 0.06" | SAE Grade 8 | Material Certificate | 100 | 94902A111 | 00000 | ||
| 5/16"-18 | 1/2" | 9/32" | 11/16" | 0.07" | SAE Grade 8 | Material Certificate | 100 | 94902A102 | 00000 | ||
| 5/16"-24 | 1/2" | 9/32" | 11/16" | 0.07" | SAE Grade 8 | Material Certificate | 100 | 94902A112 | 00000 | ||
| 3/8"-16 | 9/16" | 11/32" | 3/4" | 0.07" | SAE Grade 8 | Material Certificate | 50 | 94902A103 | 0000 | ||
| 1/2"-13 | 3/4" | 29/64" | 1 1/32" | 0.1" | SAE Grade 8 | Material Certificate | 25 | 94902A104 | 00000 | ||
| 1/2"-20 | 3/4" | 29/64" | 1 1/32" | 0.1" | SAE Grade 8 | Material Certificate | 25 | 94902A105 | 00000 | ||
| 5/8"-11 | 15/16" | 9/16" | 1 9/32" | 0.12" | SAE Grade 8 | Material Certificate | 10 | 94902A106 | 00000 | ||
| 5/8"-18 | 15/16" | 9/16" | 1 9/32" | 0.12" | SAE Grade 8 | — | 10 | 94902A107 | 00000 | ||
| 3/4"-10 | 1 1/8" | 21/32" | 1 1/2" | 0.16" | SAE Grade 8 | Material Certificate | 10 | 94902A108 | 00000 | ||
| 3/4"-16 | 1 1/8" | 21/32" | 1 1/2" | 0.16" | SAE Grade 8 | — | 10 | 94902A109 | 00000 | ||
| 7/8"-14 | 1 5/16" | 51/64" | 1 3/4" | 0.19" | SAE Grade 8 | — | 1 | 94902A113 | 0000 | ||
Steel | |||||||||||
| 1/4"-20 | 7/16" | 15/64" | 19/32" | 0.06" | SAE Grade 8 | — | 100 | 91094A111 | 00000 | ||
| 1/4"-28 | 7/16" | 15/64" | 19/32" | 0.06" | SAE Grade 8 | Material Certificate | 100 | 91094A112 | 00000 | ||
| 5/16"-18 | 1/2" | 9/32" | 11/16" | 0.07" | SAE Grade 8 | — | 25 | 91094A113 | 00000 | ||
| 3/8"-16 | 9/16" | 11/32" | 3/4" | 0.08" | SAE Grade 8 | Material Certificate | 10 | 91094A114 | 0000 | ||
| 1/2"-13 | 3/4" | 29/64" | 1 1/32" | 0.1" | SAE Grade 8 | Material Certificate | 10 | 91094A115 | 0000 | ||
| 1/2"-20 | 3/4" | 29/64" | 1 1/32" | 0.1" | SAE Grade 8 | Material Certificate | 10 | 91094A116 | 00000 | ||
| 9/16"-18 | 7/8" | 1/2" | 1 3/16" | 0.11" | SAE Grade 8 | — | 5 | 91094A117 | 00000 | ||
| 5/8"-11 | 15/16" | 9/16" | 1 9/32" | 0.12" | SAE Grade 8 | — | 5 | 91094A118 | 00000 | ||
| 5/8"-18 | 15/16" | 9/16" | 1 9/32" | 0.12" | SAE Grade 8 | — | 5 | 91094A119 | 00000 | ||
| 3/4"-10 | 1 1/8" | 21/32" | 1 1/2" | 0.16" | SAE Grade 8 | — | 1 | 91094A120 | 0000 | ||
| 3/4"-16 | 1 1/8" | 21/32" | 1 1/2" | 0.16" | SAE Grade 8 | — | 1 | 91094A121 | 0000 | ||
| 7/8"-9 | 1 5/16" | 51/64" | 1 3/4" | 0.19" | SAE Grade 8 | Material Certificate | 1 | 91094A122 | 0000 | ||
| 1"-8 | 1 1/2" | 57/64" | 2 1/16" | 0.21" | SAE Grade 8 | Material Certificate | 1 | 91094A123 | 0000 | ||
| 1"-14 | 1 1/2" | 57/64" | 2 1/16" | 0.21" | SAE Grade 8 | Material Certificate | 1 | 91094A124 | 0000 | ||
Serrated Flange Nuts
Medium-Strength Steel
 |
Rated Grade 5, Grade F, or Class 8, these nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.
Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating that creates a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
Steel—Best for dry environments since moisture will cause these nuts to rust.
Flange, mm | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Wd., mm | Ht., mm | Dia. | Thk. | Fastener Strength Grade/Class | Specs. Met | Certificate Type | Pkg. Qty. | Pkg. | |||
Zinc-Plated Steel | ||||||||||||
| M3 × 0.5 mm | 5.5 | 4 | 8 | 0.7 | Class 8 | DIN 6923, ISO 4161 | — | 100 | 96194A206 | 00000 | ||
| M4 × 0.7 mm | 7 | 4.6 | 10 | 0.4 | Class 8 | DIN 6923 | Material Certificate | 100 | 96194A201 | 0000 | ||
| M5 × 0.8 mm | 8 | 5 | 11.8 | 1 | Class 8 | DIN 6923 | Material Certificate | 100 | 96194A202 | 0000 | ||
| M6 × 1 mm | 10 | 6 | 14.2 | 1.1 | Class 8 | DIN 6923, ISO 4161 | — | 100 | 96194A101 | 0000 | ||
| M8 × 1 mm | 13 | 8 | 17.9 | 1.2 | Class 8 | DIN 6923 | — | 100 | 96194A107 | 00000 | ||
| M8 × 1.25 mm | 13 | 8 | 17.9 | 1.2 | Class 8 | DIN 6923, ISO 4161 | — | 100 | 96194A102 | 00000 | ||
| M10 × 1.25 mm | 15 | 10 | 21.8 | 1.5 | Class 8 | DIN 6923 | Material Certificate | 50 | 96194A203 | 00000 | ||
| M10 × 1.5 mm | 15 | 10 | 21.8 | 1.5 | Class 8 | DIN 6923 | Material Certificate | 50 | 96194A103 | 00000 | ||
| M12 × 1.75 mm | 18 | 12 | 26 | 1.8 | Class 8 | DIN 6923 | Material Certificate | 25 | 96194A104 | 00000 | ||
| M14 × 2 mm | 21 | 14 | 29.9 | 2.1 | Class 8 | DIN 6923 | — | 25 | 96194A112 | 00000 | ||
| M16 × 2 mm | 24 | 16 | 34.5 | 2.4 | Class 8 | DIN 6923, ISO 4161 | — | 10 | 96194A204 | 00000 | ||
| M20 × 2.5 mm | 30 | 20 | 42.8 | 3 | Class 8 | DIN 6923, ISO 4161 | — | 1 | 96194A205 | 0000 | ||
Zinc-Yellow-Chromate-Plated Steel | ||||||||||||
| M4 × 0.7 mm | 7 | 4.2 | 10.5 | 0.9 | Class 8 | DIN 6923, ISO 4161 | — | 50 | 96194A110 | 00000 | ||
| M5 × 0.8 mm | 8 | 5 | 11.8 | 1 | Class 8 | DIN 6923, ISO 4161 | — | 50 | 96194A120 | 00000 | ||
| M6 × 1 mm | 10 | 6 | 14.2 | 1.1 | Class 8 | DIN 6923, ISO 4161 | Material Certificate | 100 | 96194A130 | 00000 | ||
| M8 × 1.25 mm | 13 | 8 | 17.9 | 1.2 | Class 8 | DIN 6923, ISO 4161 | Material Certificate | 50 | 96194A140 | 00000 | ||
| M10 × 1.25 mm | 15 | 10 | 21.8 | 1.5 | Class 8 | DIN 6923 | Material Certificate | 50 | 96194A190 | 00000 | ||
| M10 × 1.5 mm | 15 | 10 | 21.8 | 1.5 | Class 8 | DIN 6923, ISO 4161 | — | 25 | 96194A150 | 00000 | ||
| M12 × 1.75 mm | 18 | 12 | 26 | 1.8 | Class 8 | DIN 6923, ISO 4161 | Material Certificate | 10 | 96194A160 | 00000 | ||
| M14 × 2 mm | 21 | 14 | 29.9 | 2.1 | Class 8 | DIN 6923 | — | 25 | 96194A210 | 00000 | ||
| M16 × 2 mm | 24 | 16 | 34.5 | 2.4 | Class 8 | DIN 6923, ISO 4161 | — | 1 | 96194A170 | 0000 | ||
Black-Oxide Steel | ||||||||||||
| M4 × 0.7 mm | 7 | 4.6 | 10 | 0.4 | Class 8 | DIN 6923 | Material Certificate | 100 | 94920A110 | 0000 | ||
| M5 × 0.8 mm | 8 | 5 | 11.8 | 1 | Class 8 | DIN 6923 | Material Certificate | 100 | 94920A120 | 0000 | ||
| M6 × 1 mm | 10 | 6 | 14.2 | 1.1 | Class 8 | DIN 6923 | Material Certificate | 100 | 94920A130 | 0000 | ||
| M8 × 1 mm | 13 | 8 | 17.9 | 1.2 | Class 8 | DIN 6923 | — | 100 | 94920A140 | 00000 | ||
| M8 × 1.25 mm | 13 | 8 | 17.9 | 1.2 | Class 8 | DIN 6923 | Material Certificate | 100 | 94920A150 | 00000 | ||
| M10 × 1.25 mm | 15 | 10 | 21.8 | 1.5 | Class 8 | DIN 6923 | — | 50 | 94920A160 | 00000 | ||
| M10 × 1.5 mm | 15 | 10 | 21.8 | 1.5 | Class 8 | DIN 6923 | — | 50 | 94920A170 | 00000 | ||
| M12 × 1.75 mm | 18 | 12 | 26 | 1.8 | Class 8 | DIN 6923 | — | 25 | 94920A180 | 00000 | ||
Steel | ||||||||||||
| M4 × 0.7 mm | 7 | 4.6 | 10 | 0.4 | Class 8 | DIN 6923 | — | 100 | 94920A105 | 0000 | ||
| M5 × 0.8 mm | 8 | 4.3 | 11.2 | 1.75 | Class 8 | — | — | 25 | 94920A300 | 00000 | ||
| M6 × 1 mm | 10 | 5.5 | 14.25 | 2.2 | Class 8 | — | — | 25 | 94920A400 | 00000 | ||
| M8 × 1 mm | 13 | 8 | 17.9 | 1.2 | Class 8 | DIN 6923 | — | 100 | 94920A106 | 00000 | ||
| M8 × 1.25 mm | 13 | 7 | 18.25 | 2.6 | Class 8 | — | — | 25 | 94920A500 | 00000 | ||
| M10 × 1.25 mm | 15 | 10 | 21.8 | 1.5 | Class 8 | DIN 6923 | — | 50 | 94920A107 | 0000 | ||
| M10 × 1.5 mm | 15 | 7.9 | 21 | 2.8 | Class 8 | — | — | 10 | 94920A600 | 00000 | ||
| M12 × 1.75 mm | 18 | 12 | 26 | 1.8 | Class 8 | DIN 6923, ISO 4161 | — | 25 | 94920A101 | 00000 | ||
| M14 × 2 mm | 21 | 14 | 29.9 | 2.1 | Class 8 | DIN 6923 | — | 25 | 94920A108 | 00000 | ||
| M16 × 2 mm | 24 | 16 | 34.5 | 2.4 | Class 8 | DIN 6923 | — | 10 | 94920A109 | 0000 | ||
High-Strength Steel
|
Flange | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Wd. | Ht. | Dia. | Thk. | Fastener Strength Grade/Class | Certificate Type | Pkg. Qty. | Pkg. | |||
Zinc-Plated Steel | |||||||||||
| 1/4"-20 | 7/16" | 15/64" | 19/32" | 0.04" | SAE Grade 8 | Material Certificate | 100 | 96282A101 | 000000 | ||
| 5/16"-18 | 1/2" | 9/32" | 11/16" | 0.04" | SAE Grade 8 | Material Certificate | 100 | 96282A102 | 00000 | ||
| 3/8"-16 | 9/16" | 11/32" | 3/4" | 0.04" | SAE Grade 8 | Material Certificate | 50 | 96282A103 | 00000 | ||
| 1/2"-13 | 3/4" | 29/64" | 1 1/32" | 0.05" | SAE Grade 8 | Material Certificate | 25 | 96282A104 | 00000 | ||
| 5/8"-11 | 15/16" | 9/16" | 1 9/32" | 0.05" | SAE Grade 8 | Material Certificate | 25 | 96282A105 | 00000 | ||
| 3/4"-10 | 1 1/8" | 21/32" | 1 1/2" | 0.06" | SAE Grade 8 | Material Certificate | 10 | 96282A106 | 00000 | ||
Zinc-Yellow-Chromate-Plated Steel | |||||||||||
| 9/16"-12 | 7/8" | 1/2" | 1 3/16" | 0.05" | SAE Grade 8 | — | 5 | 95922A114 | 00000 | ||
Black-Oxide Steel | |||||||||||
| 1/2"-13 | 3/4" | 29/64" | 1 1/32" | 0.05" | SAE Grade 8 | — | 10 | 95922A115 | 00000 | ||
| 5/8"-11 | 15/16" | 9/16" | 1 9/32" | 0.05" | SAE Grade 8 | — | 5 | 95922A116 | 00000 | ||
| 3/4"-10 | 1 1/8" | 43/64" | 1 1/2" | 0.06" | SAE Grade 8 | — | 1 | 95922A117 | 0000 | ||
Black Phosphate-Coated Steel | |||||||||||
| 1/4"-20 | 7/16" | 15/64" | 19/32" | 0.04" | SAE Grade 8 | — | 50 | 95922A111 | 0000 | ||
| 5/16"-18 | 1/2" | 9/32" | 11/16" | 0.04" | SAE Grade 8 | — | 25 | 95922A112 | 0000 | ||
| 3/8"-16 | 9/16" | 11/32" | 3/4" | 0.04" | SAE Grade 8 | — | 25 | 95922A113 | 0000 | ||
| 3/4"-10 | 1 1/8" | 43/64" | 1 1/2" | 0.06" | SAE Grade 8 | — | 10 | 95922A160 | 00000 | ||
Steel | |||||||||||
| 1/4"-20 | 7/16" | 15/64" | 19/32" | 0.04" | SAE Grade 8 | — | 100 | 95922A110 | 00000 | ||
| 5/16"-18 | 1/2" | 9/32" | 43/64" | 0.04" | SAE Grade 8 | — | 100 | 95922A120 | 00000 | ||
| 3/8"-16 | 9/16" | 11/32" | 3/4" | 0.04" | SAE Grade 8 | — | 100 | 95922A130 | 00000 | ||
| 1/2"-13 | 3/4" | 29/64" | 1 1/32" | 0.05" | SAE Grade 8 | — | 25 | 95922A140 | 00000 | ||
| 5/8"-11 | 15/16" | 9/16" | 1 9/32" | 0.05" | SAE Grade 8 | — | 10 | 95922A150 | 0000 | ||
Nylon-Insert Flange Nuts
Medium-Strength Steel
 |
Rated Grade 5, Grade F, or Class 8, these nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
Black Corrosion-Resistant-Coated Steel—Combines a finished appearance with the rust resistance of stainless steel. The coating has been tested to extreme standards, including 1,000 hours of salt spray resistance, to hold up in wet and outdoor environments. Also known as black luster.
Flange, mm | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Wd., mm | Ht., mm | Dia. | Thk. | Fastener Strength Grade/Class | Specs. Met | Certificate Type | Insert Max. Temp., ° F | Pkg. Qty. | Pkg. | |||
Zinc-Plated Steel | |||||||||||||
| M5 × 0.8 mm | 8 | 7.1 | 11.8 | 1 | Class 8 | DIN 6926 | — | 250 | 100 | 92461A200 | 000000 | ||
| M6 × 1 mm | 10 | 9.1 | 14.2 | 1.1 | Class 8 | DIN 6926 | Material Certificate | 250 | 100 | 92461A300 | 00000 | ||
| M8 × 1.25 mm | 13 | 11.1 | 17.9 | 1.2 | Class 8 | DIN 6926 | Material Certificate | 250 | 100 | 92461A400 | 00000 | ||
| M10 × 1.5 mm | 15 | 13.5 | 21.8 | 1.5 | Class 8 | DIN 6926 | Material Certificate | 250 | 50 | 92461A500 | 00000 | ||
| M12 × 1.75 mm | 18 | 16.1 | 26 | 1.8 | Class 8 | DIN 6926 | — | 250 | 25 | 92461A600 | 00000 | ||
| M14 × 2 mm | 21 | 18.8 | 29.9 | 2.1 | Class 8 | DIN 6926 | — | 250 | 5 | 92461A103 | 0000 | ||
| M16 × 2 mm | 24 | 20.3 | 34.5 | 2.4 | Class 8 | DIN 6926 | Material Certificate | 250 | 10 | 92461A101 | 00000 | ||
| M20 × 2.5 mm | 30 | 24.8 | 42.8 | 3 | Class 8 | DIN 6926 | — | 250 | 1 | 92461A104 | 0000 | ||
Black Corrosion-Resistant-Coated Steel | |||||||||||||
| M5 × 0.8 mm | 8 | 7.1 | 11.8 | 1 | Class 8 | DIN 6926 | — | 250 | 5 | 97071A101 | 0000 | ||
| M6 × 1 mm | 10 | 9.1 | 14.2 | 1.1 | Class 8 | DIN 6926 | — | 250 | 5 | 97071A102 | 0000 | ||
| M8 × 1.25 mm | 13 | 11.1 | 17.9 | 1.2 | Class 8 | DIN 6926 | — | 250 | 5 | 97071A103 | 0000 | ||
| M12 × 1.75 mm | 18 | 16.1 | 26 | 1.8 | Class 8 | DIN 6926 | — | 250 | 5 | 97071A104 | 00000 | ||
Distorted-Thread Flange Nuts
Medium-Strength Steel
 |
Rated Grade 5, Grade F, or Class 8, these nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
Flange, mm | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Wd., mm | Ht., mm | Dia. | Thk. | Fastener Strength Grade/Class | Specs. Met | Certificate Type | Pkg. Qty. | Pkg. | |||
Zinc-Plated Steel | ||||||||||||
| M5 × 0.8 mm | 8 | 6.2 | 11.8 | 1 | Class 8 | DIN 6927 | — | 50 | 90426A160 | 000000 | ||
| M6 × 1 mm | 10 | 7.3 | 14.2 | 1.1 | Class 8 | DIN 6927 | — | 50 | 90426A110 | 00000 | ||
| M8 × 1.25 mm | 13 | 9.4 | 17.9 | 1.2 | Class 8 | DIN 6927 | — | 50 | 90426A120 | 00000 | ||
| M10 × 1.25 mm | 15 | 11.4 | 21.8 | 1.5 | Class 8 | DIN 6927 | — | 25 | 90426A170 | 00000 | ||
| M10 × 1.5 mm | 15 | 11.4 | 21.8 | 1.5 | Class 8 | DIN 6927 | Material Certificate | 25 | 90426A130 | 00000 | ||
| M12 × 1.75 mm | 18 | 13.8 | 26 | 1.8 | Class 8 | DIN 6927 | Material Certificate | 25 | 90426A140 | 00000 | ||
| M16 × 2 mm | 24 | 18.3 | 34.5 | 2.4 | Class 8 | DIN 6927 | Material Certificate | 10 | 90426A150 | 00000 | ||
JIS Flange Nuts
Medium-Strength Steel
 |
Rated Grade 5, Grade F, or Class 8, these nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
Flange, mm | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Wd., mm | Ht., mm | Dia. | Thk. | Fastener Strength Grade/Class | JIS Specification | Pkg. Qty. | Pkg. | |||
Zinc-Plated Steel | |||||||||||
| M3 × 0.5 mm | 5.5 | 3.7 | 8 | 0.6 | Class 8 | JIS B 1190 | 100 | 90438A110 | 000000 | ||
| M4 × 0.7 mm | 7 | 4.2 | 10.5 | 0.6 | Class 8 | JIS B 1190 | 100 | 90438A120 | 00000 | ||
| M5 × 0.8 mm | 8 | 5 | 11.8 | 0.7 | Class 8 | JIS B 1190 | 100 | 90438A130 | 00000 | ||
| M6 × 1 mm | 10 | 6 | 14 | 0.8 | Class 8 | JIS B 1190 | 100 | 90438A140 | 00000 | ||
| M8 × 1 mm | 12 | 8 | 17.5 | 1.1 | Class 8 | JIS B 1190 | 10 | 90438A160 | 00000 | ||
| M8 × 1.25 mm | 12 | 8 | 17.5 | 1.1 | Class 8 | JIS B 1190 | 25 | 90438A150 | 00000 | ||
| M10 × 1 mm | 14 | 10 | 21 | 1.2 | Class 8 | JIS B 1190 | 10 | 90438A170 | 00000 | ||
| M10 × 1.25 mm | 14 | 10 | 21 | 1.2 | Class 8 | JIS B 1190 | 5 | 90438A180 | 0000 | ||
| M12 × 1.25 mm | 17 | 11.5 | 25 | 1.4 | Class 8 | JIS B 1190 | 5 | 90438A210 | 0000 | ||
| M12 × 1.75 mm | 17 | 11.5 | 25 | 1.4 | Class 8 | JIS B 1190 | 5 | 90438A190 | 0000 | ||
Steel Serrated-Flange Hex Head Screw and Nut Assortments
 |
Stock up on fasteners in various sizes to create vibration-resistant joints. The screws and nuts in these assortments both have a flange with a serrated edge that grips your material to keep screws in place. The screws have a head with six flat sides to keep wrenches and sockets from slipping and rounding off the drive.
Head height includes the flange. Length is measured from under the flange.
Medium-Strength Fastener—Your go-to screws for fastening most machinery and equipment. They have tensile strengths from 90,000 to 120,000 psi.
Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.
No. of Pieces | Serrated-Flange Hex Head Screws Included | Serrated Flange Nuts Included | Fastener Strength Grade/Class | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|
Medium-Strength Zinc-Plated Steel | ||||||||
| 475 | M6 × 1 mm Thread: 12 mm, 16 mm, 20 mm, 25 mm, and 30 mm Lg. (145 Pieces) M8 × 1.25 mm Thread: 16 mm, 20 mm, 30 mm, and 40 mm Lg. (85 Pieces) M10 × 1.5 mm Thread: 20 mm, 25 mm, 30 mm, and 40 mm Lg. (75 Pieces) | M6 × 1 mm Thread (80 Pieces) M8 × 1.25 mm Thread (50 Pieces) M10 × 1.5 mm Thread (40 Pieces) | Class 8.8, Class 8 | Metal Box | 91638A114 | 0000000 | ||
Steel Flanged Hex Head Screw and Nut Assortments
 |
A range of flanged fasteners for a variety of jobs. The screws and nuts in these assortments both have a flange that spreads pressure over a wide area to protect thin and soft materials. The screws have a head with six flat sides to keep wrenches and sockets from slipping and rounding off the drive.
Head height includes the flange. Length is measured from under the flange.
Medium-Strength Fastener—Your go-to screws for fastening most machinery and equipment. They have tensile strengths from 90,000 to 120,000 psi.
High-Strength Fastener—Commonly used to fasten components in valves, pumps, motors, and other high-stress applications. These screws have a tensile strength of 125,000 to 160,000 psi.
Zinc-Yellow-Chromate-Plated Steel—With slightly better corrosion resistance than zinc-plated steel screws, these stand up to more frequent exposure to moisture.
Phosphate-Coated Steel—More corrosion resistant than black-oxide steel, these screws are suitable for environments with some moisture. They have a dark, matte coating for a finished look.
No. of Pieces | Flanged Hex Head Screws Included | Flange Nuts Included | Fastener Strength Grade/Class | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|
Medium-Strength Zinc-Yellow-Chromate-Plated Steel | ||||||||
| 470 | M6 × 1 mm Thread: 12 mm, 16 mm, 20 mm, 25 mm, and 30 mm Lg. (145 Pieces) M8 × 1.25 mm Thread: 20 mm, 25 mm, 30 mm, and 40 mm Lg. (80 Pieces) M10 × 1.5 mm Thread: 20 mm, 25 mm, 30 mm, and 40 mm Lg. (75 Pieces) | M6 × 1 mm Thread (80 Pieces) M8 × 1.25 mm Thread (50 Pieces) M10 × 1.5 mm Thread (40 Pieces) | Class 8.8, Class 8 | Metal Box | 91618A113 | 0000000 | ||
High-Strength Black Phosphate-Coated Steel | ||||||||
| 460 | 1/4"-20 Thread: 1/2", 3/4", 1", 1 1/2", and 2" Lg. (115 Pieces) 5/16"-18 Thread: 3/4", 1", 1 1/2", 2", and 2 1/2" Lg. (85 Pieces) 3/8"-16 Thread: 3/4", 1", 1 1/2", 2", and 2 1/2" Lg. (65 Pieces) 1/2"-13 Thread: 1", 1 1/4", 1 1/2", 2", and 2 1/2" Lg. (25 Pieces) | 1/4"-20 Thread (65 Pieces) 5/16"-18 Thread (40 Pieces) 3/8"-16 Thread (50 Pieces) 1/2"-13 Thread (15 Pieces) | SAE Grade 8 | Metal Box | 91618A112 | 000000 | ||
