Search Results
Performance Properties Performance Properties |
|---|
|
Specifications Met Specifications Met |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
Hardness Hardness |
|---|
|
About Composites
More
Slippery Conductive Garolite CE
- Color: Black
- Max. Temperature: 235° F
- Tensile Strength: 6,000-10,000 psi (Good)
- Impact Strength: 1.4-1.7 ft.-lbs./in. (Poor)
- Hardness: Rockwell M90 (Hard)
- For Use Outdoors: No
Graphite is added to these Garolite CE sheets to provide a slippery surface that reduces friction. The graphite also makes them conductive. Often used for bearings and wear pads, they're constructed of a phenolic resin with cotton fabric reinforcement. Garolite CE is sometimes called canvas-grade industrial laminate, phenolic, and Bakelite.
| Thick. | Thick. Tolerance | Each | |
12" × 12" | |||
|---|---|---|---|
| 1/16" | -0.009" to 0.009" | 0000000 | 00000 |
| 1/8" | -0.019" to 0.019" | 0000000 | 00000 |
| 1/4" | -0.038" to 0.038" | 0000000 | 00000 |
| 1/2" | 0" to 0.05" | 0000000 | 00000 |
| 3/4" | 0" to 0.075" | 0000000 | 00000 |
| 1" | 0" to 0.1" | 0000000 | 00000 |
18" × 39" | |||
| 1/16" | -0.009" to 0.009" | 0000000 | 00000 |
| 1/8" | -0.019" to 0.019" | 0000000 | 00000 |
| 1/4" | -0.038" to 0.038" | 0000000 | 000000 |
| 1/2" | 0" to 0.05" | 0000000 | 000000 |
| 3/4" | 0" to 0.075" | 0000000 | 000000 |
| 1" | 0" to 0.1" | 0000000 | 000000 |
39" × 39" | |||
| 1/16" | -0.009" to 0.009" | 0000000 | 00000 |
| 1/8" | -0.019" to 0.019" | 0000000 | 00000 |
| 1/4" | -0.038" to 0.038" | 0000000 | 000000 |
| 1/2" | 0" to 0.05" | 0000000 | 000000 |
| 3/4" | 0" to 0.075" | 0000000 | 000000 |
| 1" | 0" to 0.1" | 0000000 | 000000 |
Economical Garolite CE Sheets
- Color: Brown
- Max. Temperature: 235° F
- Tensile Strength: 6,000-10,000 psi (Good)
- Impact Strength: 1.4-1.7 ft.-lbs./in. (Poor)
- Hardness: Rockwell M100 (Extra Hard)
- For Use Outdoors: No
- Specifications Met: MIL-I-24768/14, UL 94HB
These Garolite CE sheets are often fabricated into parts where high strength is not required. They are made of a phenolic resin with cotton fabric reinforcement, which makes it easy to machine into mechanical parts, such as pulleys, gears, bushings, and washers. Garolite CE is sometimes called canvas-grade industrial laminate, phenolic, and Bakelite.
| Thick. | Thick. Tolerance | Each | |
4" × 6" | |||
|---|---|---|---|
| 3/4" | -0.029" to 0.029" | 0000000 | 000000 |
| 1" | -0.033" to 0.033" | 0000000 | 00000 |
| 1 1/2" | -0.041" to 0.041" | 0000000 | 00000 |
12" × 12" | |||
| 1/32" | -0.007" to 0.007" | 000000 | 0000 |
| 1/16" | -0.008" to 0.008" | 000000 | 0000 |
| 1/8" | -0.01" to 0.01" | 0000000 | 00000 |
| 3/16" | -0.013" to 0.013" | 0000000 | 00000 |
| 1/4" | -0.015" to 0.015" | 0000000 | 00000 |
| 3/8" | -0.02" to 0.02" | 0000000 | 00000 |
| 1/2" | -0.024" to 0.024" | 0000000 | 00000 |
| 5/8" | -0.027" to 0.027" | 0000000 | 00000 |
| 3/4" | -0.029" to 0.029" | 0000000 | 00000 |
| 1" | -0.033" to 0.033" | 0000000 | 00000 |
| 1 1/4" | -0.037" to 0.037" | 0000000 | 00000 |
| 1 1/2" | -0.041" to 0.041" | 0000000 | 000000 |
| 2" | -0.049" to 0.049" | 0000000 | 000000 |
12" × 24" | |||
| 1/32" | -0.007" to 0.007" | 000000 | 0000 |
| 1/16" | -0.008" to 0.008" | 000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 0000000 | 00000 |
| 3/16" | -0.013" to 0.013" | 0000000 | 00000 |
| 1/4" | -0.015" to 0.015" | 0000000 | 00000 |
| 3/8" | -0.02" to 0.02" | 0000000 | 00000 |
| 1/2" | -0.024" to 0.024" | 0000000 | 00000 |
| 5/8" | -0.027" to 0.027" | 0000000 | 00000 |
| 3/4" | -0.029" to 0.029" | 0000000 | 000000 |
| 1" | -0.033" to 0.033" | 0000000 | 000000 |
| 1 1/4" | -0.037" to 0.037" | 0000000 | 000000 |
| 1 1/2" | -0.041" to 0.041" | 0000000 | 000000 |
| 2" | -0.049" to 0.049" | 0000000 | 000000 |
24" × 24" | |||
| 1/32" | -0.007" to 0.007" | 000000 | 00000 |
| 1/16" | -0.008" to 0.008" | 000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 0000000 | 00000 |
| 3/16" | -0.013" to 0.013" | 0000000 | 00000 |
| 1/4" | -0.015" to 0.015" | 0000000 | 00000 |
| 3/8" | -0.02" to 0.02" | 0000000 | 000000 |
| 1/2" | -0.024" to 0.024" | 0000000 | 000000 |
| 5/8" | -0.027" to 0.027" | 0000000 | 000000 |
| 3/4" | -0.029" to 0.029" | 0000000 | 000000 |
| 1" | -0.033" to 0.033" | 0000000 | 000000 |
| 1 1/4" | -0.037" to 0.037" | 0000000 | 000000 |
| 1 1/2" | -0.041" to 0.041" | 0000000 | 000000 |
| 2" | -0.049" to 0.049" | 0000000 | 000000 |
24" × 36" | |||
| 1/32" | -0.007" to 0.007" | 000000 | 00000 |
| 1/16" | -0.008" to 0.008" | 000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 0000000 | 00000 |
| 3/16" | -0.013" to 0.013" | 0000000 | 00000 |
| 1/4" | -0.015" to 0.015" | 0000000 | 000000 |
| 3/8" | -0.02" to 0.02" | 0000000 | 000000 |
| 1/2" | -0.024" to 0.024" | 0000000 | 000000 |
| 5/8" | -0.027" to 0.027" | 0000000 | 000000 |
| 3/4" | -0.029" to 0.029" | 0000000 | 000000 |
| 1" | -0.033" to 0.033" | 0000000 | 000000 |
| 1 1/4" | -0.037" to 0.037" | 0000000 | 000000 |
| 1 1/2" | -0.041" to 0.041" | 0000000 | 000000 |
| 2" | -0.049" to 0.049" | 0000000 | 000000 |
36" × 48" | |||
| 1/32" | -0.007" to 0.007" | 000000 | 00000 |
| 1/16" | -0.008" to 0.008" | 0000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 0000000 | 000000 |
| 3/16" | -0.013" to 0.013" | 0000000 | 000000 |
| 1/4" | -0.015" to 0.015" | 0000000 | 000000 |
| 3/8" | -0.02" to 0.02" | 0000000 | 000000 |
| 1/2" | -0.024" to 0.024" | 0000000 | 000000 |
| 5/8" | -0.027" to 0.027" | 0000000 | 000000 |
| 3/4" | -0.029" to 0.029" | 0000000 | 000000 |
| 1" | -0.033" to 0.033" | 0000000 | 000000 |
| 1 1/4" | -0.037" to 0.037" | 0000000 | 000000 |
| 1 1/2" | -0.041" to 0.041" | 0000000 | 000000 |
| 2" | -0.049" to 0.049" | 0000000 | 00000000 |